Database Info

[ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11)

This will flash the stock kernel, modem, system, dbdata and cache. There's no need for a pit since we do not have any other OS versions to flash yet that would re-partition your device.
Instructions:
1) Make sure the drivers for the Infuse 4G are installed.
2) Please unzip the .zip file.
3) Run Odin3 v1.81.exe (as administrator if you are on Windows 7)
4) Place your phone into download mode (pull battery, press and hold both Volume keys, put battery in and plug the USB cable in)
5) Make sure your phone shows up in Odin as COM##
5) Click the PDA button and choose the .tar.md5 file in the .zip.
6) Press Start.
7) After it completes, it will reboot your device and should boot up like normal. If it fails on flash see FAQ Question 4 below!
There is ALWAYS risk when flashing your device. Unfortunately, I will not be held responsible. Please use this as a means to get back to stock if something happens.
* DO NOT FLASH PIT (PIT not included).
* DO NOT CHECK ANYTHING IN ODIN EXCEPT "AUTO-REBOOT" AND "F. RESET TIME" (should be checked by default)
FAQ:
Question 1: Why does it have .md5 at the end?
Answer: Its in md5 format so in case your download is corrupted, you dont brick your phone.
Question 2: Can I rename it to just .tar and flash?
Answer: DO NOT rename it from md5 format. If it says the md5 sum is invalid, then it will not flash. Just re-download again and try again.
Question 3: Why does it give an error if i try to open in in 7zip/WinRAR/WinZip?
Answer: It should! Windows doesn't recognize when an md5sum is written to the end of a file. Don't panic!
Question 4: It passed the md5sum check, but failed writing on factoryfs. What do I do?!?
Answer: This is exactly what happened to me. Don't panic. Follow these steps exactly:
* Hold the power button to turn off.
* Make sure Odin is still open.
* Plug the USB cable in and hold the volume keys down at the same time. You will be on the screen with a "Phone ! PC" screen.
* Press Start on Odin.
* Once it completes, it will boot up into recovery. Don't worry about wiping cache or user data. Just choose "Reboot Device".
This flash takes quite a long period of time due to the size of the files. I'd say it took me 5 - 10 minutes for the flash to complete. Be patient! Afterwards it booted up with recovery, and chose Reboot Now.
Thanks:
* codeworkx - for the advice and assistance!
* beatblaster - First tester after a bad framework-res update.
* Realityfalse - Second tester
* dotsad - Third tester
* imnuts - Very Helpful advice and instructions for Odin installations!
* My Infuse - Fourth and final tester (thought I lost her for a minute there!)
Download Links:
UCKD5 Stock + Root + 3e Modded Recovery
UCKD5 100% Stock (no root, no 3e Modded Recovery)

What a life saver

I second that, up and running again
Sent from my SAMSUNG-SGH-I997 using XDA App

not working
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.

rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837

Though it's too late for me to try it myself, I'm sure this will be a great help to everyone! Thanks so much!
Sent from my SAMSUNG-SGH-I997 using XDA App

Dani897 said:
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837
Click to expand...
Click to collapse
same thing what i have to do ?

well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.

Dani897 said:
well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.
Click to expand...
Click to collapse
did you fix your phone and work fine now or still his lock Bootloader ?

no it was someone else. i have fixed my captivate many time though. that would have normally been my next step if it didnt work the first time.

rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I997 using XDA App
Can you wipe all user data and wipe cache from recovery (power phone off via power button or battery pull, hold both volune keys down, then hold power down until samsung appears on the screen and let go of ONLY power)? That should get you to boot.
This happened to beatblaster when we tested. Then he did the data wipes in recovery and booted up fine.

cant get recovery at all. tried all above. pit doesnt work

Thanks
Thanks for doing this, I am trying to learn how to dev on android and Ubuntu and was installing and also waiting for a way back before doing anything.

rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Have you tried to wipe data and cache yet?

rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Was your phone bricked before trying this? If so, how did you brick it?
Sent from my SAMSUNG-SGH-I997 using XDA App

wasnt bricked. wanted to try odin restore.

how can I clear data and cache without recovery? is there a way in ODIN?

rblankman said:
how can I clear data and cache without recovery? is there a way in ODIN?
Click to expand...
Click to collapse
TO get into recovery to wipe data and cache, unplug your phone from the USB cable then make sure the phone is powered off. While the device is powered off press and hold the 2 volume buttons then while holding those 2 volume buttons down press and hold the power button. That will get you into recovery. WHile in there, you can wipe user data and wipe cache. Give that a go.

understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.

rblankman said:
understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.
Click to expand...
Click to collapse
Whoa. The only thing I can recommend from here is to try to flash via ODIN again or take the brick back to the store and swap for new. Next time, I'd recommend not fixing anything unless it's broken

My device freezed..plz help

Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help

ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....

ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.

first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:

malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.

MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies

ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.

mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?

ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there

so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0

Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...

ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy

LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.

mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?

ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..

mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>

ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient

can't install cwm

I can't install cwm using any of theese methods
1.http://forum.xda-developers.com/showthread.php?t=2247394
i had one more... but i can't find the link anymore...
i made a video.. if you think it will help https://www.dropbox.com/s/hxtveu89d2e88qk/2014-08-25 21.01.26.mp4?dl=0
odin said ok... and after, when vol+ home+ power, phone goes into original install mode.

After flash don't let ur phone reboot. Pull battery out.

rs tony said:
After flash don't let ur phone reboot. Pull battery out.
Click to expand...
Click to collapse
tried that too... it just freezes... in samsung logo

Cristian.Ene said:
tried that too... it just freezes... in samsung logo
Click to expand...
Click to collapse
Why you're using 4.1.2 recovery for 4.2.2?

PROBLEM SOLVED!
Use this thread
http://forum.xda-developers.com/showthread.php?t=2560928
WITH ODIN
1. Be sure, that your device is on 4.2.2 stock firmware
2. Be sure that Samsung drivers are installed on your pc. Just install Kies or google for them
3. Download Odin 3.07(google it)
4. Open Odin as administrator
5. Klick on PDA and select *filename*.tar.md5. Check that "F. Reset Time" and "Auto Reboot" are checked and nothing else.
6. Click start and wait until your device reboots.
(If stock flashes back stock recovery automatically(some peoples phones do that))
!!!!!!!!!!!!!!!!!!!!!!!
1. Complete guide above until step 4.
2. Klick on PDA and select *filename*.tar.md5. Check that "F. Reset Time" is set and nothing else.
3. Pull out your phones battery.
4. Reboot into recovery(with Home+Power+Volume Up)
!!!!!!!!!!!!!!!!!!!!!
5. You should get a message to prevent rom from flashing stock revcovery, answer yes

Fix any samsung android stucked at boot screen!

Hi guys in today's topic iam going to tell you that how you can fix any Samsung android phone that is stucked at booting screen.
It doesn't matter that in which point of boot you phone is stucked. It usually happen when you do something wrong while rooting, flashing, modifying, etc with your device. Do worry with the help of this post you will definitely fix your device. And if you have any questions you can comment down below.
So for fixing you device you have to flash a new firmware on your device using Odin.
**Firmware is a file or zip that contains all the partitions of you device.
**Odin is a flash tool that is use to flash firmware files on any Samsung.
1) Download Samsung usb driver from here and install it.
2)Now download Odin 3.07 from here and extract it on you pc. ( There are latest versions available for Odin but i recommend to use this 3.07 version because i think its easy to use and understand.
3) Then download you Samsung device firmware from here.
Now let's start the flashing process!
1) Remove you phone battery and reinsert if you haven't already. If you device battery is non-removable then it's ok.
2) Now press volume down+ home+ power button to boot into download mod.
3) Press volume up key to continue.
4) Now go to your pc and start odin.
5) Then connect your android device to your pc through usb cable. It's better to use the original usb cable that comes with your device.
6) After your device connected you can see "added" message in the Odin message box.
7) Now make sure that Auto reboot and f. time reset is checked and everything is unchecked. It's important!!!!
8) Then click on "PDA" and select the tar.md5 file (Stock firmware) that you have downloaded.
9) And then just click on start to start the flashing process.
** It will take some time to flash and just sit back don't touch your phone or usb.
10) After that you will see a reset or pass message in Odin. You can now disconnect your phone.
11) After that you phone will boot it will take some time to boot for the first time.
12) Sometimes phone still don't start after flashing the stock firmware because the phone has some corrupt data and cache. So if this happen to you the just go to recovery by pressing volume up+ home+ power and then just factory reset your device and clear the cache and then click on reboot.
** In some device when you clear cache fron recovery it doesn't clear it and just reboot the device automatically. If this happen to then the its totally fine.
After that your phone will definitely boot and fixed!!!
So now you can use your device again.
**You can also check my video tutorial!

FRP lock bricked my device? please help

I made a huge mistake, unticked OEM unlock in developer settings when I was on DEVBASE rom (G930FXXS6ESGD_DevBase_v6.0_encrypt.zip), and now what I'm able to do is:
- flash combination file: COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar.md5, this way I am able to enter recovery and download mode.
- flash stock rom via Odin: G930FXXS3ERLF_G930FORX3ERKF_ORX. After flashing, phone reboots blue screen "sotware update", then "Erasing" , unexpectedly restarts before finishing erasing, and then yellow triangle, " no command". Unable to enter recovery(black screen: #fail to open recovery_cause....), device is stuck in bootloop or I can get to Download mode, but can't turn off the phone.
what can I do? any help appreciated:angel:

lulzor said:
I made a huge mistake, unticked OEM unlock in developer settings when I was on DEVBASE rom (G930FXXS6ESGD_DevBase_v6.0_encrypt.zip), and now what I'm able to do is:
- flash combination file: COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar.md5, this way I am able to enter recovery and download mode.
- flash stock rom via Odin: G930FXXS3ERLF_G930FORX3ERKF_ORX. After flashing, phone reboots blue screen "sotware update", then "Erasing" , unexpectedly restarts before finishing erasing, and then yellow triangle, " no command". Unable to enter recovery(black screen: #fail to open recovery_cause....), device is stuck in bootloop or I can get to Download mode, but can't turn off the phone.
what can I do? any help appreciated:angel:
Click to expand...
Click to collapse
when it goes to the "no command" screen, what happens if you let it sit on that screen for about 3 min or so? also, have you tries keis? i hate keis, but it helped me recover a phone a time or 2 in the past

youdoofus said:
when it goes to the "no command" screen, what happens if you let it sit on that screen for about 3 min or so? also, have you tries keis? i hate keis, but it helped me recover a phone a time or 2 in the past
Click to expand...
Click to collapse
1. it keeps rebooting and heats up
2. Kies doesn't want to connect, but even if it could....I think there is only 1 way: "Firmware upgrade and initialization" menu.... entering model number SM-G930F, and Serial Number ??????
(I was able to look my serial number up in this Factory Binary rom/Combination rom, but Kies states it's not correct which I believe - it looks kinda weird though. I am unable to find my box, since I got this phone used. I don't want to disassemble the back cover to check it on the battery because I would loose water resistance :/ )

Update: I have the box, also I spot the S/N on the back cover

I'm able to flash via Odin U3/S3 roms only(which are designed to my region), but it doesn't remove FRP LOCK...It was be good if any rom could start the google auth process, cause I have access to my google account, it's a silly thing that I got locked out from my system... :crying:

lulzor said:
I'm able to flash via Odin U3/S3 roms only(which are designed to my region), but it doesn't remove FRP LOCK...It was be good if any rom could start the google auth process, cause I have access to my google account, it's a silly thing that I got locked out from my system... :crying:
Click to expand...
Click to collapse
have you tried entering your own gmail account info in the fields where its asking for the previous users info?

the problem is that I can't even get into this menu, none of the stock roms I'm able to flash are booting up, except the Factory Binary (Combination rom). Even the lowest security rom is S3...? That one is actually not bootlooping, able to turn off device, but not booting up, recovery is working here and download mode.
I'm afraid that only a Z3X box software, with the physical box and cable could save this phone....

After ~20h work finally got into the phone!!!
https://www.youtube.com/watch?v=NplMF8O2aTk
this tutorial helped!
So the steps:
1. flash your device compatible Combination file with Odin
2. boot up, enable developer options, check usb debugging to be enabled
3. reboot into recovery, do a factory reset
4. enter Download mode
5. repack your device compatible stock rom's "AP.... .tar.md5" file into a new .tar file so it only contains: boot.img, sboot.bin, system.img
6. flash with odin, enjoy!
7. thank to this guy from the video

lulzor said:
the problem is that I can't even get into this menu, none of the stock roms I'm able to flash are booting up, except the Factory Binary (Combination rom). Even the lowest security rom is S3...? That one is actually not bootlooping, able to turn off device, but not booting up, recovery is working here and download mode.
I'm afraid that only a Z3X box software, with the physical box and cable could save this phone....
Click to expand...
Click to collapse
lulzor said:
After ~20h work finally got into the phone!!!
https://www.youtube.com/watch?v=NplMF8O2aTk
this tutorial helped!
So the steps:
1. flash your device compatible Combination file with Odin
2. boot up, enable developer options, check usb debugging to be enabled
3. reboot into recovery, do a factory reset
4. enter Download mode
5. repack your device compatible stock rom's "AP.... .tar.md5" file into a new .tar file so it only contains: boot.img, sboot.bin, system.img
6. flash with odin, enjoy!
7. thank to this guy from the video
Click to expand...
Click to collapse
awesome to hear that you got past the FRP lock!