I was originally on the latest Mahdi rom and I decided to flash to SM Mahdi but I keep getting boot loop what am I doing wrong? I have done dirty flash first then I tried clean flash still getting the same issue. Can anyone help?
TiggaPwease said:
I was originally on the latest Mahdi rom and I decided to flash to SM Mahdi but I keep getting boot loop what am I doing wrong? I have done dirty flash first then I tried clean flash still getting the same issue. Can anyone help?
Click to expand...
Click to collapse
Are you flashing a kernel with it?
Jimlarck said:
Are you flashing a kernel with it?
Click to expand...
Click to collapse
I wasn't before but after you suggested it, it works now thanks. I flashed it with uber kernel.
Related
hi does anyone have the stock cm11s kernel?
i tried to flash francos kernel and now the phone just sits and the oneplus logo forever.
i can get in recovery and fastboot no problem.
but i think if i just flash the stock kernel back i should be ok.
so does anyone have a copy of the stock kernel i could flash in TWRP?
i had the ota update done before i went to franco.
infamouskid said:
hi does anyone have the stock cm11s kernel?
i tried to flash francos kernel and now the phone just sits and the oneplus logo forever.
i can get in recovery and fastboot no problem.
but i think if i just flash the stock kernel back i should be ok.
so does anyone have a copy of the stock kernel i could flash in TWRP?
i had the ota update done before i went to franco.
Click to expand...
Click to collapse
Read much?
http://forum.xda-developers.com/showthread.php?t=2857110
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
garz said:
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
Click to expand...
Click to collapse
Better ask your question in AK or Temasek thread
A friend of mine is having touch issues with his opo! It's unresponsive sometimes! He is on stock unrooted 05q. Will flashing a custom kernel help?
If yes please suggest a good one
garz said:
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
Click to expand...
Click to collapse
Dirty flash the ROM first to get the stock kernel back, then try flashing another kernel.
Flash latest twrp.
Sent from my bacon!!!!!
Use twrp recovery
loridoo said:
Use twrp recovery
Click to expand...
Click to collapse
What a useful answer.
Sent from my bacon!!!!!
timmaaa said:
Dirty flash the ROM first to get the stock kernel back, then try flashing another kernel.
Click to expand...
Click to collapse
I tried this, I now tried 3 different roms. SlimSaber unnofficial, Robbie's CM12, and Euphoria and all of them do now allow me to flash AK kernel or any other kernel. I think something borked on one of TYR's kernel flashes. May I should reset the phone completely. Is there an option to do this with ODIN that someone can point me into?
NickosD said:
Flash latest twrp.
Sent from my bacon!!!!!
Click to expand...
Click to collapse
Duh...
garz said:
Is there an option to do this with ODIN that someone can point me into?
Duh...
Click to expand...
Click to collapse
Odin is just for Samsung phone
We use fastboot instead
waterdaan said:
Odin is just for Samsung phone
We use fastboot instead
Click to expand...
Click to collapse
Right, just wiped/restored my phone to stock/factory all the way back to CM11S30R. Unlocked bootloader, rerooted, upgraded firmware and reflashed Euphoria and still can't flash AK without bootloopingon the ONE+ logo. I then clean wiped, and flashed Euphoria and same issue. I am at a loss, I have no idea what else to do.
garz said:
Right, just wiped/restored my phone to stock/factory all the way back to CM11S30R. Unlocked bootloader, rerooted, upgraded firmware and reflashed Euphoria and still can't flash AK without bootloopingon the ONE+ logo. I then clean wiped, and flashed Euphoria and same issue. I am at a loss, I have no idea what else to do.
Click to expand...
Click to collapse
No need to flash back to 30R
I'd flash the 05Q stock using fastboot
That comes with latest modem etc
Then if you'd like flash custom rom in recovery
Unlock bootloader?? Did you lock it after unlocking it?
What version of recovery are you using?
waterdaan said:
No need to flash back to 30R
I'd flash the 05Q stock using fastboot
That comes with latest modem etc
Then if you'd like flash custom rom in recovery
Unlock bootloader?? Did you lock it after unlocking it?
What version of recovery are you using?
Click to expand...
Click to collapse
I am using TWRP 2.8.5.1.. I just figured I'd redo everything from scratch. Nothing is working. I can only flash TYR with all the roms I've tried, where it successfully boots. I'm also flashing UKM 3.8.1.
garz said:
I am using TWRP 2.8.5.1.. I just figured I'd redo everything from scratch. Nothing is working. I can only flash TYR with all the roms I've tried, where it successfully boots. I'm also flashing UKM 3.8.1.
Click to expand...
Click to collapse
try to redownload AK kernel, Maybe a bad download
Anyway good luck
waterdaan said:
try to redownload AK kernel, Maybe a bad download
Anyway good luck
Click to expand...
Click to collapse
Did that twice. Installs perfectly every time.
I've searched but can not find. I'm on lolipop stock rooted but can't flash CM12. I tried flashing bootstack 30b but that didn't work.
Edit:
Never mind, forgot I have to flash 4.4 then flash cm12
briand.mooreg said:
I've searched but can not find. I'm on lolipop stock rooted but can't flash CM12. I tried flashing bootstack 30b but that didn't work.
Edit:
Never mind, forgot I have to flash 4.4 then flash cm12
Click to expand...
Click to collapse
How do you do this? I keep getting an error. Can you flash 4.4 and then cm12 or do you have to setup the 4.4 first?
Flash the 20G bootstack, reboot back into recovery and then flash ROM.
Nvm you got it. Didn't see the edit.
Can someone here just recap the steps needed to installing cm12 from stock lollipop. There isn't a guide anywhere and I'd rather not try it based on snippets I've read here and there
Sent from my LG-D801 using Tapatalk
aranurea said:
Flash the 20G bootstack, reboot back into recovery and then flash ROM.
Nvm you got it. Didn't see the edit.
Click to expand...
Click to collapse
Do you have 12.1 up and running on yours without issues? Whenever mine connects to LTE it reboots. Curious to see if this is an issue that others are experiencing.
asinglenoob said:
Do you have 12.1 up and running on yours without issues? Whenever mine connects to LTE it reboots. Curious to see if this is an issue that others are experiencing.
Click to expand...
Click to collapse
I have the same issue
Hey guys I figured it out. I had flashed the 20G bootstack and had the same issue - reboot every time connected to LTE. Not only on this ROM but every AOSP 12.1 ROM. Switching to the 30b bootstack solved the issue for me.
Ok maybe this is a stupid question, but how to instal custom kernel on cm12.1 like thunderzap, is it same like in here http://forum.xda-developers.com/xperia-l/general/guide-installing-kernels-roms-xperia-l-t2548498 ???
Download kernel from https://www.androidfilehost.com/?fid=23991606952611173 and flash it after flash CM.
Wuzimu said:
Download kernel from https://www.androidfilehost.com/?fid=23991606952611173 and flash it after flash CM.
Click to expand...
Click to collapse
you said flash it after flash CM, but im on the CM, so just go to CWM,wipe and flash it?
Yes, I aways flash CM before TZ and everything works fine.
Hello all. I found my Moto G ( XT1033) and decided to use it as a backup phone. Anyway, I flashed a CM12.1 ROM. Worked well for a while before switching off and getting stuck on a bootloop. Strange, I've already used it for some time. I thought maybe there were some problems with the ROM file. But now, I've tried it with Tesla, Blisspop, CM11, CM13. All have worked well for me in the past. Every ROM is facing the same problem.
Any help would be appreciated.
i face the same problem. its like everyday i have to do stock rom on my phone because it stuck on boatloader.
if all new clean flashed ROMs result in boot loops, you will have to reinstall stock ROM (with fastboot) to fix it. flashing stock ROM with custom recovery will not fix it though
koshikas said:
if all new clean flashed ROMs result in boot loops, you will have to reinstall stock ROM (with fastboot) to fix it. flashing stock ROM with custom recovery will not fix it though
Click to expand...
Click to collapse
Any idea what's causing it, though? I'm not able to flash a ROM into the device using the fastboot method. I've tried various builds, they all show the error after a few commands 'PARTITION SIZE IS SMALL' .
i'm not exactly sure whether you did it right. refer;
https://forum.xda-developers.com/showthread.php?t=2542219
https://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795