I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
garz said:
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
Click to expand...
Click to collapse
Better ask your question in AK or Temasek thread
A friend of mine is having touch issues with his opo! It's unresponsive sometimes! He is on stock unrooted 05q. Will flashing a custom kernel help?
If yes please suggest a good one
garz said:
I've been using Temasek's UNOFFICIAL Build, for his last 3 build updates with TYR kernel. I decided I wanted to try out AK, or Render Kernel with Tamasek. Flashed new UKM update from AK, flashed new kernel. Restarted the phone and it constantly reboots on One+ logo. Never loads boot animation. Decided to fully wipe the phone, including system and reflash Tamesek. Then tried flashing AK. Same problem. Tried full wiping again and flashing a different rom and AK kernel or Render kernel and same issue. Reflashed TYR kernel and it works perfectly fine.
I have no idea what's going on. But, I don't want to be stuck using only 1 kernel. Any ideas?
Click to expand...
Click to collapse
Dirty flash the ROM first to get the stock kernel back, then try flashing another kernel.
Flash latest twrp.
Sent from my bacon!!!!!
Use twrp recovery
loridoo said:
Use twrp recovery
Click to expand...
Click to collapse
What a useful answer.
Sent from my bacon!!!!!
timmaaa said:
Dirty flash the ROM first to get the stock kernel back, then try flashing another kernel.
Click to expand...
Click to collapse
I tried this, I now tried 3 different roms. SlimSaber unnofficial, Robbie's CM12, and Euphoria and all of them do now allow me to flash AK kernel or any other kernel. I think something borked on one of TYR's kernel flashes. May I should reset the phone completely. Is there an option to do this with ODIN that someone can point me into?
NickosD said:
Flash latest twrp.
Sent from my bacon!!!!!
Click to expand...
Click to collapse
Duh...
garz said:
Is there an option to do this with ODIN that someone can point me into?
Duh...
Click to expand...
Click to collapse
Odin is just for Samsung phone
We use fastboot instead
waterdaan said:
Odin is just for Samsung phone
We use fastboot instead
Click to expand...
Click to collapse
Right, just wiped/restored my phone to stock/factory all the way back to CM11S30R. Unlocked bootloader, rerooted, upgraded firmware and reflashed Euphoria and still can't flash AK without bootloopingon the ONE+ logo. I then clean wiped, and flashed Euphoria and same issue. I am at a loss, I have no idea what else to do.
garz said:
Right, just wiped/restored my phone to stock/factory all the way back to CM11S30R. Unlocked bootloader, rerooted, upgraded firmware and reflashed Euphoria and still can't flash AK without bootloopingon the ONE+ logo. I then clean wiped, and flashed Euphoria and same issue. I am at a loss, I have no idea what else to do.
Click to expand...
Click to collapse
No need to flash back to 30R
I'd flash the 05Q stock using fastboot
That comes with latest modem etc
Then if you'd like flash custom rom in recovery
Unlock bootloader?? Did you lock it after unlocking it?
What version of recovery are you using?
waterdaan said:
No need to flash back to 30R
I'd flash the 05Q stock using fastboot
That comes with latest modem etc
Then if you'd like flash custom rom in recovery
Unlock bootloader?? Did you lock it after unlocking it?
What version of recovery are you using?
Click to expand...
Click to collapse
I am using TWRP 2.8.5.1.. I just figured I'd redo everything from scratch. Nothing is working. I can only flash TYR with all the roms I've tried, where it successfully boots. I'm also flashing UKM 3.8.1.
garz said:
I am using TWRP 2.8.5.1.. I just figured I'd redo everything from scratch. Nothing is working. I can only flash TYR with all the roms I've tried, where it successfully boots. I'm also flashing UKM 3.8.1.
Click to expand...
Click to collapse
try to redownload AK kernel, Maybe a bad download
Anyway good luck
waterdaan said:
try to redownload AK kernel, Maybe a bad download
Anyway good luck
Click to expand...
Click to collapse
Did that twice. Installs perfectly every time.
Related
Hi,
I have managed to put on a kernel that's not working. Is there a way to revert back to the original kernel? I do have a nandroid backup, but re-installing that didn't put on the old kernel.
I am using Liquidsmooth ROM. Any help would be appreciated.
Thanks.
if you can boot into the rom use flashimagegui, if not do the normal fastboot the boot.img then do it again with flashimagegui to get the modules.
what kernel did you try to flash? the only kernel that will work with new liquidsmooth is cm10.1_vz-oc-linaro.3.zip. it contains modules, if you aren't s-off then you need to flash boot.img in fastboot then flash again in recovery for the modules.
DvineLord said:
if you can boot into the rom use flashimagegui, if not do the normal fastboot the boot.img then do it again with flashimagegui to get the modules.
what kernel did you try to flash? the only kernel that will work with new liquidsmooth is cm10.1_vz-oc-linaro.3.zip. it contains modules, if you aren't s-off then you need to flash boot.img in fastboot then flash again in recovery for the modules.
Click to expand...
Click to collapse
I did exactly that, presuming that it was working... But I have been facing issues. The phone restarts every once in a while and I have managed to get to this condition after multiple wipes and restoring a backup. Anyways I don't know what the issue is I was just wondering how to revert back to the original kernel.
im running Liquid-JB-v2.1-RC2-evita.zip and cm10.1_vz-oc-linaro.3.zip. there seem to be some general issues with the rom that present as basically glitching and gets worse overtime atleast for me. im pretty sure it isnt related to the kernel. but to revert kernel just load the liquidsmooth zip into flashimagegui and itll pull the needed files, let it wipe cache and dalvik then reboot.
DvineLord said:
im running Liquid-JB-v2.1-RC2-evita.zip and cm10.1_vz-oc-linaro.3.zip. there seem to be some general issues with the rom that present as basically glitching and gets worse overtime atleast for me. im pretty sure it isnt related to the kernel. but to revert kernel just load the liquidsmooth zip into flashimagegui and itll pull the needed files, let it wipe cache and dalvik then reboot.
Click to expand...
Click to collapse
I do not have s-off does the flashimagegui works even without it?
strommer666 said:
I do not have s-off does the flashimagegui works even without it?
Click to expand...
Click to collapse
yes, Flash Image GUI
you should also s-off your phone it will make life ALOT easier and the process is simple take like 2 minutes.
DvineLord said:
yes, Flash Image GUI
you should also s-off your phone it will make life ALOT easier and the process is simple take like 2 minutes.
Click to expand...
Click to collapse
Thanks I'll make sure I do that..
also new stable build of liquidsmooth just got released. you should flash it. imma flash it with a clean full wipe. but you should s-off first so you dont have to flash boot.img separately every rom.
DvineLord said:
also new stable build of liquidsmooth just got released. you should flash it. imma flash it with a clean full wipe. but you should s-off first so you dont have to flash boot.img separately every rom.
Click to expand...
Click to collapse
Ya, I saw the new version wanted to try that which is why I wanted to got to the old kernel version. I had tried installing it with the linaro kernel but it gets stuck on the boot screen.
Update: - I installed the flash gui image, then extracted and installed the kernel , factory reset the phone, then installed the latest liquid smooth build. But it is still not going ahead of the boot animation.
Update 3 :- Got the old kernel back. Did a restore. Working fine now . But still for some reason I cannot install the new ROM yet.
strommer666 said:
Ya, I saw the new version wanted to try that which is why I wanted to got to the old kernel version. I had tried installing it with the linaro kernel but it gets stuck on the boot screen.
Update: - I installed the flash gui image, then extracted and installed the kernel , factory reset the phone, then installed the latest liquid smooth build. But it is still not going ahead of the boot animation.
Update 3 :- Got the old kernel back. Did a restore. Working fine now . But still for some reason I cannot install the new ROM yet.
Click to expand...
Click to collapse
you need everything. you don't need to extract the kernel. just load the whole zip file.
DvineLord said:
you need everything. you don't need to extract the kernel. just load the whole zip file.
Click to expand...
Click to collapse
I did load the full file and the flash gui image extracted the kernel. The thing is I have the kernel now, but still I can't seem to be able to install the new version of the LiquidSmooth build. I am doing a nandroid backup of this thing and try installing it again.
well new liquidsmooth is nice, im using cwm now as recovery since ive had tons of issues with twrp since version 2.2.2.0
Ok so I have quite a strange problem. Whenever I try to reboot my phone, either from holding the power button and choosing the "reboot" option on the screen, or by turning the phone off physically, and then turning it back on, my phone does not boot. When I try to turn it on, it shows the Samsung image, and then the screen turns black and nothing happens afterwards. The only way I found around this, is that I have to put my phone into recovery and then do a factory reset.
Currently, I'm running BeanStalk v4.3.1009, but I've also flashed the latest version of Slimbean and the samething happens. I used Odin to flash back into the stock Rogers GB firmware and I've gotten the phone to successfully reboot.
I then flashed Beanstalk and I was again unable to successfully reboot the phone.
Any ideas what's going on? I'm using TWRP v2.5 and then updated to v2.6 after going back to the original Rogers GB firmware, if that matters.
bluecrush69 said:
I'm using TWRP v2.5
Click to expand...
Click to collapse
This is the problem.
Should I be using CWM? I updated to TWRP 2.6.3 and flashed the roms, but I'm still getting the same issue when trying to install the latest version of Slimbean/Beanstalk. The problem doesn't occur if I try an older version of Beanstalk though.
Oh well, I'll just stick with the version that's working for me.
bluecrush69 said:
Should I be using CWM? I updated to TWRP 2.6.3 and flashed the roms, but I'm still getting the same issue when trying to install the latest version of Slimbean/Beanstalk. The problem doesn't occur if I try an older version of Beanstalk though.
Oh well, I'll just stick with the version that's working for me.
Click to expand...
Click to collapse
Flash it once with cwm. That'll clear things up then you can go back to twrp
jd1639 said:
Flash it once with cwm. That'll clear things up then you can go back to twrp
Click to expand...
Click to collapse
Can someone explain what's technically wrong with twrp 2.6.3 I've flashed a ton of these 4.3 Roms without issue. Why is everyone saying it's bad?
Sent from my XT1080 using Tapatalk
When I found out that Towel Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
yoerz said:
When I found out that Tower Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
Click to expand...
Click to collapse
CM builds use JB kernel and baseband. You'll need to find the right JB baseband for your phone and flash it and then the CM build you want to use.
AyDee said:
CM builds use JB kernel and baseband. You'll need to find the right JB baseband for your phone and flash it and then the CM build you want to use.
Click to expand...
Click to collapse
What's a baseband? and what do I "do" with it once I find it?
yoerz said:
What's a baseband? and what do I "do" with it once I find it?
Click to expand...
Click to collapse
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
AyDee said:
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
Click to expand...
Click to collapse
The only problem is, I can't do a full wipe because I have to keep the ZIP files of Cyanogen Mod and Gapps on the device. There is no way to load them on the device when in TWRP.
Also, that post is very confusing. It has a list of roms, and then a download link to a completely different list. How do I know which download correlates with:
D801BK (T-Mobile USA)
D80110C
M8974A-AAAANAZM-1.0.190034
by QUALCOMM, Incorporated Aug 10 2013
Is it LGD801_10C_RADIO.zip ??
AyDee said:
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
Click to expand...
Click to collapse
OK I tried again, flashed LGD801_10C_RADIO.zip before the Cyanogen zip, then Gapps and Supersu, restarted and it's doing the same thing. Cyanogen screen loading animation but never booting up.
Like I said before, I CANNOT do a full wipe in TWRP because that will delete all the ZIP files on the device. This device does not have an SD card I can load them on and the USB connection doesn't work (driver not found, this is apparently a known bug).
yoerz said:
OK I tried again, flashed LGD801_10C_RADIO.zip before the Cyanogen zip, then Gapps and Supersu, restarted and it's doing the same thing. Cyanogen screen loading animation but never booting up.
Like I said before, I CANNOT do a full wipe in TWRP because that will delete all the ZIP files on the device. This device does not have an SD card I can load them on and the USB connection doesn't work (driver not found, this is apparently a known bug).
Click to expand...
Click to collapse
With TWRP can't in the wipe section you do an advanced wipe and just not select internal storage, thus leaving the ROM on your phone while still doing a full wipe?
TheBestEver said:
Full wipe means the "factory reset" option in TWRP. You're on kitkat bootloader. You need to somehow find a flsshable .zip of the jb bootloader. Modem doesn't matter. I've used JB and KK modem and both work. Maybe you're on stock KK kernel and need to flash the JB kernel? If you're on KK stock and want to jump to CM you should find a flashable .zip of both kernels or .IMG times and try that as well if option 1 doesn't work. Sorry
Click to expand...
Click to collapse
Where can I find that Kernel?
TheBestEver said:
Are you trying to flash CM 10.2 or CM11?
Click to expand...
Click to collapse
I tried both.
CM Stable-10.2.0-d801
and
CM 11-20140617-NIGHTLY-d801
yoerz said:
which restarted into TWRK Recovery. Great!
Click to expand...
Click to collapse
Is that where Miley needs to go? Typo of the day goes to you!
Goldie said:
Is that where Miley needs to go? Typo of the day goes to you!
Click to expand...
Click to collapse
Twrp.. Twrk.. whats the difference. You know what I mean.
yoerz said:
Twrp.. Twrk.. whats the difference. You know what I mean.
Click to expand...
Click to collapse
Well yeah obviously. This is why you were awarded "Typo of the day" and not "WTF of the day"
Sent from my SM-G900F using Tapatalk
yoerz said:
I tried both.
CM Stable-10.2.0-d801
and
CM 11-20140617-NIGHTLY-d801
Click to expand...
Click to collapse
Both of which still run 4.2 sources. Before u flash either , what must occur first is flash the 4.2 jb modem then Rom etc.
Sent from my LG-D801 using XDA Premium 4 mobile app
You might be able to help me, I root with TowelRoot (checked with Root Checker) and then installed/run AutoRec for T-Mobile d801. And it boot loop into download mode, (i have a package to fix that, but still have no Recovery)
yoerz said:
When I found out that Towel Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
Click to expand...
Click to collapse
You can find the KK modem in the SOKP thread in Development and that may help.
hi does anyone have the stock cm11s kernel?
i tried to flash francos kernel and now the phone just sits and the oneplus logo forever.
i can get in recovery and fastboot no problem.
but i think if i just flash the stock kernel back i should be ok.
so does anyone have a copy of the stock kernel i could flash in TWRP?
i had the ota update done before i went to franco.
infamouskid said:
hi does anyone have the stock cm11s kernel?
i tried to flash francos kernel and now the phone just sits and the oneplus logo forever.
i can get in recovery and fastboot no problem.
but i think if i just flash the stock kernel back i should be ok.
so does anyone have a copy of the stock kernel i could flash in TWRP?
i had the ota update done before i went to franco.
Click to expand...
Click to collapse
Read much?
http://forum.xda-developers.com/showthread.php?t=2857110
I was originally on the latest Mahdi rom and I decided to flash to SM Mahdi but I keep getting boot loop what am I doing wrong? I have done dirty flash first then I tried clean flash still getting the same issue. Can anyone help?
TiggaPwease said:
I was originally on the latest Mahdi rom and I decided to flash to SM Mahdi but I keep getting boot loop what am I doing wrong? I have done dirty flash first then I tried clean flash still getting the same issue. Can anyone help?
Click to expand...
Click to collapse
Are you flashing a kernel with it?
Jimlarck said:
Are you flashing a kernel with it?
Click to expand...
Click to collapse
I wasn't before but after you suggested it, it works now thanks. I flashed it with uber kernel.