When I found out that Towel Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
yoerz said:
When I found out that Tower Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
Click to expand...
Click to collapse
CM builds use JB kernel and baseband. You'll need to find the right JB baseband for your phone and flash it and then the CM build you want to use.
AyDee said:
CM builds use JB kernel and baseband. You'll need to find the right JB baseband for your phone and flash it and then the CM build you want to use.
Click to expand...
Click to collapse
What's a baseband? and what do I "do" with it once I find it?
yoerz said:
What's a baseband? and what do I "do" with it once I find it?
Click to expand...
Click to collapse
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
AyDee said:
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
Click to expand...
Click to collapse
The only problem is, I can't do a full wipe because I have to keep the ZIP files of Cyanogen Mod and Gapps on the device. There is no way to load them on the device when in TWRP.
Also, that post is very confusing. It has a list of roms, and then a download link to a completely different list. How do I know which download correlates with:
D801BK (T-Mobile USA)
D80110C
M8974A-AAAANAZM-1.0.190034
by QUALCOMM, Incorporated Aug 10 2013
Is it LGD801_10C_RADIO.zip ??
AyDee said:
Baseband is your modem. Install the zip in recovery before installing your rom. Install baseband/modem, full wipe, install rom.
You should find what you need here> http://forum.xda-developers.com/showthread.php?t=2451426
I suggest you read up on this stuff a little to get more familiar.
Click to expand...
Click to collapse
OK I tried again, flashed LGD801_10C_RADIO.zip before the Cyanogen zip, then Gapps and Supersu, restarted and it's doing the same thing. Cyanogen screen loading animation but never booting up.
Like I said before, I CANNOT do a full wipe in TWRP because that will delete all the ZIP files on the device. This device does not have an SD card I can load them on and the USB connection doesn't work (driver not found, this is apparently a known bug).
yoerz said:
OK I tried again, flashed LGD801_10C_RADIO.zip before the Cyanogen zip, then Gapps and Supersu, restarted and it's doing the same thing. Cyanogen screen loading animation but never booting up.
Like I said before, I CANNOT do a full wipe in TWRP because that will delete all the ZIP files on the device. This device does not have an SD card I can load them on and the USB connection doesn't work (driver not found, this is apparently a known bug).
Click to expand...
Click to collapse
With TWRP can't in the wipe section you do an advanced wipe and just not select internal storage, thus leaving the ROM on your phone while still doing a full wipe?
TheBestEver said:
Full wipe means the "factory reset" option in TWRP. You're on kitkat bootloader. You need to somehow find a flsshable .zip of the jb bootloader. Modem doesn't matter. I've used JB and KK modem and both work. Maybe you're on stock KK kernel and need to flash the JB kernel? If you're on KK stock and want to jump to CM you should find a flashable .zip of both kernels or .IMG times and try that as well if option 1 doesn't work. Sorry
Click to expand...
Click to collapse
Where can I find that Kernel?
TheBestEver said:
Are you trying to flash CM 10.2 or CM11?
Click to expand...
Click to collapse
I tried both.
CM Stable-10.2.0-d801
and
CM 11-20140617-NIGHTLY-d801
yoerz said:
which restarted into TWRK Recovery. Great!
Click to expand...
Click to collapse
Is that where Miley needs to go? Typo of the day goes to you!
Goldie said:
Is that where Miley needs to go? Typo of the day goes to you!
Click to expand...
Click to collapse
Twrp.. Twrk.. whats the difference. You know what I mean.
yoerz said:
Twrp.. Twrk.. whats the difference. You know what I mean.
Click to expand...
Click to collapse
Well yeah obviously. This is why you were awarded "Typo of the day" and not "WTF of the day"
Sent from my SM-G900F using Tapatalk
yoerz said:
I tried both.
CM Stable-10.2.0-d801
and
CM 11-20140617-NIGHTLY-d801
Click to expand...
Click to collapse
Both of which still run 4.2 sources. Before u flash either , what must occur first is flash the 4.2 jb modem then Rom etc.
Sent from my LG-D801 using XDA Premium 4 mobile app
You might be able to help me, I root with TowelRoot (checked with Root Checker) and then installed/run AutoRec for T-Mobile d801. And it boot loop into download mode, (i have a package to fix that, but still have no Recovery)
yoerz said:
When I found out that Towel Root can finally root my 4.4.2 LG G2 (D801) from T-Mobile I was very excited to try it, so I went ahead and installed it. It worked of course, very well. so I continued to install Autorec, which restarted into TWRK Recovery. Great!
I wipe Dalvik & Cache and flash the Stable Cyanogen 10.2 rom from 2013, and now it's stuck on boot. Also tried with the latest nightly to same outcome.
What am I missing here?
Click to expand...
Click to collapse
You can find the KK modem in the SOKP thread in Development and that may help.
Related
Hi,
I have currently 4.5 CleanRom, and I used TWRP to install it, but I want Jellybean on my phone, can I just use TWRP to install CyanogenMod 10 with it? or do I need another installer of roms like CWM Recovery?
thanks.
yching07 said:
Hi,
I have currently 4.5 CleanRom, and I used TWRP to install it, but I want Jellybean on my phone, can I just use TWRP to install CyanogenMod 10 with it? or do I need another installer of roms like CWM Recovery?
thanks.
Click to expand...
Click to collapse
of course you can, but if you're on a newer Hboot, you will need to boot the rom through fast boot with boot.img
but of course.
dustin4vn said:
of course you can, but if you're on a newer Hboot, you will need to boot the rom through fast boot with boot.img
but of course.
Click to expand...
Click to collapse
I already have TWRP installed and I know how to access it on fastboot, the only reason I asked why is because I have seen some rooms not working properly with CWM Recovery, so I didnt know if there was any problem the other way around with roms like Cyanogen.
Thanks!
your good to go with twrp, i recommend updating to twrp 2.3.1.0
Will the CM nightlies flash normally on the old hboot?
Sent from my Nexus 7 using xda premium
they should but if you have any problems go into bootloader and run this command "fastboot erase cache"
are you using twrp 2.3.1.0?
Bootlooping CM10 on Telstra One XL
Hey guys been trying to work this out for the last 20 hours.
Now i followed the very good guides to put TWRP on the phone that worked fine tried to load cm10 latest nightly rom on kept bootlooping. so decided to give another rom ago.
used viper and it worked fine.
wanted to try and get cm10 working
So i have twrp 2.3.1
And latest cm-10-20121102-NIGHTLY-evita.zip
i wipe system, factory default cache. and the other cache.
go and install the rom all looks good, wipe caches and reboot.. than goes to the cool cm10 logo and loops there for AGES like 30 mins than i power cycled it and tried over.
with no working cm10 there i looked around and followed a guide to fastboot a new boot.img on from out of the cm10 zip.
this looked like it was going to work but still reboot and bootlooping.
can anyone help please.
AnThraXau said:
Hey guys been trying to work this out for the last 20 hours.
Now i followed the very good guides to put TWRP on the phone that worked fine tried to load cm10 latest nightly rom on kept bootlooping. so decided to give another rom ago.
used viper and it worked fine.
wanted to try and get cm10 working
So i have twrp 2.3.1
And latest cm-10-20121102-NIGHTLY-evita.zip
i wipe system, factory default cache. and the other cache.
go and install the rom all looks good, wipe caches and reboot.. than goes to the cool cm10 logo and loops there for AGES like 30 mins than i power cycled it and tried over.
with no working cm10 there i looked around and followed a guide to fastboot a new boot.img on from out of the cm10 zip.
this looked like it was going to work but still reboot and bootlooping.
can anyone help please.
Click to expand...
Click to collapse
try this.
1.) Download the 10/27 build
2.) get the boot.img from this build
3.) wipe cach/dalvik and system
4.) install 11/2 nightly
5.) flash the 10/27 boot.img
6.) reboot
This worked for me, something with the 11/2 and 11/1 boot.img was keeping it from booting.
Good luck
yching07 said:
can I just use TWRP to install CyanogenMod 10 with it? or do I need another installer of roms like CWM Recovery?
Click to expand...
Click to collapse
I would only recommend TWRP with CM10, or any other ROM.
Problems with CMW are due to the fact that it never officially supported our device, and was just a port. TWRP has no such issues.
redpoint73 said:
I would only recommend TWRP with CM10, or any other ROM.
Problems with CMW are due to the fact that it never officially supported our device, and was just a port. TWRP has no such issues.
Click to expand...
Click to collapse
Ohh okok, great thanks, I already installed the TWRP 2.3 from goomanager, lets see if I get the courage to use cm10
yching07 said:
Ohh okok, great thanks, I already installed the TWRP 2.3 from goomanager, lets see if I get the courage to use cm10
Click to expand...
Click to collapse
You don't need courage to do that. You need patience, reading and common sense.. Good luck
Sent from my HTC One XL using xda premium
I'm running into an issue. I have at&t skyrocket (i727). I am trying to flash a rom but every time to try, it aborts. There's a message that says, "This package is for sch-i727 devices; this is a hercules"
Any advice on how to proceed?
thanks in advance.
Are you sure you don't have a t989?
jd1639 said:
Are you sure you don't have a t989?
Click to expand...
Click to collapse
I am sure. I checked behind the battery. Plus, I downloaded cm-nightly hercules version and tried to install it but it aborted.
cov3nant said:
I am sure. I checked behind the battery. Plus, I downloaded cm-nightly hercules version and tried to install it but it aborted.
Click to expand...
Click to collapse
In settings, about phone what model numbers shows up?
jd1639 said:
In settings, about phone what model numbers shows up?
Click to expand...
Click to collapse
If i recall, it says sch-i727 but i am having trouble restoring my backup.
cov3nant said:
If i recall, it says sch-i727 but i am having trouble restoring my backup.
Click to expand...
Click to collapse
Model says i727. I restored original stock firmware via Odin.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Same Problem
I am having the same problem. Is there any solution?
I am on stock rock 4.2.1
and in settings, it is showing - samsung sgh-i727
ps: it is saying this package is for sgh-i727 skyrocket, yours is sghi727
swapnilps said:
I am having the same problem. Is there any solution?
I am on stock rock 4.2.1
and in settings, it is showing - samsung sgh-i727
ps: it is saying this package is for sgh-i727 skyrocket, yours is sghi727
Click to expand...
Click to collapse
Let's see if I can help. First of all. Be sure to read Vincom's thread about how to install properly a Custom Recovery. Then, go to your custom recovery. Which most likely will be TWRP. I suggest you to Mount the USB Storage and place the CWM zip and your wanted custom rom zip with gapps into your storage. Install CWM and then reboot to recovery. It might take a little bit till CWM starts. Once you are in, delete Cache and Dalvik. Then, install the custom rom. Once you are done, you are done. Before installing gapps I'd suggest you to boot it so you make sure it's all working properly. Last time I installed at the same time (the ROM and Gapps) I saw so many pop-ups that my phone got stuck! Make sure you are using a stable version. As seen several times, nightlies often come with often more trouble than a stable version. They are nightlies for some reason! Right?
I hope it works!
Done!
FriedrichEngels said:
Let's see if I can help. First of all. Be sure to read Vincom's thread about how to install properly a Custom Recovery. Then, go to your custom recovery. Which most likely will be TWRP. I suggest you to Mount the USB Storage and place the CWM zip and your wanted custom rom zip with gapps into your storage. Install CWM and then reboot to recovery. It might take a little bit till CWM starts. Once you are in, delete Cache and Dalvik. Then, install the custom rom. Once you are done, you are done. Before installing gapps I'd suggest you to boot it so you make sure it's all working properly. Last time I installed at the same time (the ROM and Gapps) I saw so many pop-ups that my phone got stuck! Make sure you are using a stable version. As seen several times, nightlies often come with often more trouble than a stable version. They are nightlies for some reason! Right?
I hope it works!
Click to expand...
Click to collapse
Tried with latest recovery!!!
..and done!
Failed to upgrade my tab, GT-P5113, from 4.2.2 to 4.4.2 using either Omni or CM11 rom. The error indicated my device is espressor10wifi and new rom are either for espressor10rf or espressor10rfxx. How do I change to either RF or RFXXX? TIA.
hvn4179 said:
Failed to upgrade my tab, GT-P5113, from 4.2.2 to 4.4.2 using either Omni or CM11 rom. The error indicated my device is espressor10wifi and new rom are either for espressor10rf or espressor10rfxx. How do I change to either RF or RFXXX? TIA.
Click to expand...
Click to collapse
update your recovery to the latest from here: http://forum.xda-developers.com/showthread.php?t=2548476 then go here:http://forum.xda-developers.com/showthread.php?t=2571498 and follow OP directions. Report back accordingly
CSP III said:
update your recovery to the latest from here: http://forum.xda-developers.com/showthread.php?t=2548476 then go here:http://forum.xda-developers.com/showthread.php?t=2571498 and follow OP directions. Report back accordingly
Click to expand...
Click to collapse
I have a p5110. Every 4.4.2 rom I try to install I only get to the boot screen. Does it tak a long time for it to boot up the first time? Now that I tried 4.4.2 I can only revert back to a few different roms mainly CM9 and AKOP 4.1.1. No sure what I am doing wrong when I am following all the step other than just not being patient enough for it to start up. I've let it try to boot for at least 5 minutes though.
btbarr16 said:
I have a p5110. Every 4.4.2 rom I try to install I only get to the boot screen. Does it tak a long time for it to boot up the first time? Now that I tried 4.4.2 I can only revert back to a few different roms mainly CM9 and AKOP 4.1.1. No sure what I am doing wrong when I am following all the step other than just not being patient enough for it to start up. I've let it try to boot for at least 5 minutes though.
Click to expand...
Click to collapse
Not too long. Couple minutes max. You sure you are using the latest update recovery, whether it be TWRP, CWM or Philz. has to be the latest for KK Roms
CSP III said:
Not too long. Couple minutes max. You sure you are using the latest update recovery, whether it be TWRP, CWM or Philz. has to be the latest for KK Roms[/QUOTE
I'm using CWM 6.0.4.7. I used to have CM10 working on it, but now I can't even go back to that.
Click to expand...
Click to collapse
btbarr16 said:
CSP III said:
Not too long. Couple minutes max. You sure you are using the latest update recovery, whether it be TWRP, CWM or Philz. has to be the latest for KK Roms[/QUOTE
I'm using CWM 6.0.4.7. I used to have CM10 working on it, but now I can't even go back to that.
Click to expand...
Click to collapse
I dont believe (i could be wrong mind you) that you can restore previous recovery back up from updated recovery. You should just back up your apps with Titanium Backup, move the whole folder to a safe place (ie: computer) Odin back to stock and work up from there. Then put your Titanium folder back and restore user apps only. Good luck
Click to expand...
Click to collapse
btbarr16 said:
CSP III said:
Not too long. Couple minutes max. You sure you are using the latest update recovery, whether it be TWRP, CWM or Philz. has to be the latest for KK Roms[/QUOTE
I'm using CWM 6.0.4.7. I used to have CM10 working on it, but now I can't even go back to that.
Click to expand...
Click to collapse
you have to update your recovery. so that u can flash these kitkat roms... i found the recovery here: http://forum.xda-developers.com/showthread.php?t=2548257
Click to expand...
Click to collapse
Pay attention that the correct recovery is been used. It happened to me, I had a p5500 recovery on my p5113 and ran into the same issue.
Pp .
sent from my P5113 using TouchPal mind control keyboard.
Hi guys! I just had got the Photon Q today and successfully got it rooted and successfully got a custom recovery installed on it. The problem is with EVERY ROM i've tried flash, it fails to install properly and aborts the installation. I've tried on both CWM and TWRP, but the result is the same and wont install. Does this have to do with the fact that the ROMs got unified for the multiple Motorola devices? I'm about to try older nightly builds i've found, just so I can have my phone on KitKat. Anyone have any ideas why every ROM is failing to install??
Well, CWM might fail if you are using an older version... However, the latest TWRP should work fine.
What's the error message? Are yo using the latest version?
arrrghhh said:
Well, CWM might fail if you are using an older version... However, the latest TWRP should work fine.
What's the error message? Are yo using the latest version?
Click to expand...
Click to collapse
Yup, i'm using the latest version, 2.7. Anyway, I got it figured out and realized it was my SD card, so I just flashed the ROMs from internal storage instead and it worked fine.
But now i'm having a new problem. Now i'm not getting any service and wifi wont come on. I've flashed custom roms on other phones before and i've never had this problem. It's like this on Carbon, Mokee, and now Cyanogen. I'm gonna keep browsing the forum for some ideas, do you have any idea by any chance?
KoolBurnX8 said:
Now i'm not getting any service and wifi wont come on. I've flashed custom roms on other phones before and i've never had this problem. It's like this on Carbon, Mokee, and now Cyanogen. I'm gonna keep browsing the forum for some ideas, do you have any idea by any chance?
Click to expand...
Click to collapse
This sounds like a result of deleted or formatted /persist partition.
Have you done it? Do you have a backup?
kabaldan said:
This sounds like a result of deleted or formatted /persist partition.
Have you done it? Do you have a backup?
Click to expand...
Click to collapse
Yup, I had a back up, but it failed to restore. I had to go back to stock because I couldn't figure out how to get back my service and wifi for the life of me. I still want to use Carbon, but i'm afraid it'll just go back to no service and no wifi again. Good thing about the stock rom, it seems to update your network profile and PRL for you.
KoolBurnX8 said:
Yup, I had a back up, but it failed to restore. I had to go back to stock because I couldn't figure out how to get back my service and wifi for the life of me. I still want to use Carbon, but i'm afraid it'll just go back to no service and no wifi again. Good thing about the stock rom, it seems to update your network profile and PRL for you.
Click to expand...
Click to collapse
You must be on the stock ROM to update the PRL. Make sure everything works & is updated before flashing a custom ROM.
arrrghhh said:
You must be on the stock ROM to update the PRL. Make sure everything works & is updated before flashing a custom ROM.
Click to expand...
Click to collapse
So I got it back to stock, then just tried the nightly of Pac man rom. It flashed fine, and my data and service are working. It's just my wifi is blacked out now and wont let me turn it on. Any ideas?
KoolBurnX8 said:
So I got it back to stock, then just tried the nightly of Pac man rom. It flashed fine, and my data and service are working. It's just my wifi is blacked out now and wont let me turn it on. Any ideas?
Click to expand...
Click to collapse
Which nightly are you running of PAC? Any logs?
arrrghhh said:
Which nightly are you running of PAC? Any logs?
Click to expand...
Click to collapse
pac_moto_msm8960_4.4.Alpha-1_20140409-051845
The ROM is great I don't wanna go back to stock
Hopefully you mean my recovery log
KoolBurnX8 said:
pac_moto_msm8960_4.4.Alpha-1_20140409-051845
The ROM is great I don't wanna go back to stock
Hopefully you mean my recovery log
Click to expand...
Click to collapse
Is that from flashing PAC...? I don't see anything there from being flashed.
I assume the ROM boots fine if you say data and service are working. I mean logs from Android, like logcat and dmesg.
arrrghhh said:
Is that from flashing PAC...? I don't see anything there from being flashed.
I assume the ROM boots fine if you say data and service are working. I mean logs from Android, like logcat and dmesg.
Click to expand...
Click to collapse
Yeah that was after flashing PAC ROM. I was finally able to do a good wipe of everything and finally got PAC running smoothly. The newest TWRP 2.7.0.1 wont let me do a good wipe, so I had to use 2.3.3.1 to do the wipe. Those versions wouldnt flash the ROMs properly and would fail, so I installed the newest TWRP 2.7.0.1 (again) and now all the ROMs i've flashed work great.
KoolBurnX8 said:
Yeah that was after flashing PAC ROM. I was finally able to do a good wipe of everything and finally got PAC running smoothly. The newest TWRP 2.7.0.1 wont let me do a good wipe, so I had to use 2.3.3.1 to do the wipe. Those versions wouldnt flash the ROMs properly and would fail, so I installed the newest TWRP 2.7.0.1 (again) and now all the ROMs i've flashed work great.
Click to expand...
Click to collapse
I read your other post, that is odd. Not sure why you would have to revert to an older version of TWRP... Actually I'm a bit behind, I'm still on 2.6.3.1 I think. Not sure upgrading my phone would be a good test, since you proved moving from an older to newer version works...
Hmmm. I might just RSD Lite back to stock to see if I can recreate this.
So i was trying to flash CM 11 onto my Razr HD following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=2518701&highlight=boot+loop
However, after flashing and everything, my phone ends up in a bootloop... I'm on 4.4.2, 183.46.10XT926, kernel 3.4.42 and an unlocked bootloader
Any help?
braube said:
So i was trying to flash CM 11 onto my Razr HD following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=2518701&highlight=boot+loop
However, after flashing and everything, my phone ends up in a bootloop... I'm on 4.4.2, 183.46.10XT926, kernel 3.4.42 and an unlocked bootloader
Any help?
Click to expand...
Click to collapse
i dont think cm is updated to 4.4 source yet, i could be wrong. (as it turns out, i was wrong and cm is on 4.4 source)
if it is not, you cant install it over 4.4, that's why it is bootlooping.
What do you talking about? CM11 is 4.4.4, maybe @braube is trying to install an old version of CM11 that is based on 3.0 kernel, just try the latest versions available here: http://download.cyanogenmod.org/?device=moto_msm8960
DorianX said:
What do you talking about? CM11 is 4.4.4, maybe @braube is trying to install an old version of CM11 that is based on 3.0 kernel, just try the latest versions available here: http://download.cyanogenmod.org/?device=moto_msm8960
Click to expand...
Click to collapse
i said "i could be wrong", learn to read, or at least reply more politely with a correction.
So you answer any question without a minimal knowledge? That's how you get so many thanks?
DorianX said:
So you answer any question without a minimal knowledge? That's how you get so many thanks?
Click to expand...
Click to collapse
jealous?
Yup I'm so jealous ;(
braube said:
So i was trying to flash CM 11 onto my Razr HD following the instructions on this thread:
http://forum.xda-developers.com/showthread.php?t=2518701&highlight=boot+loop
However, after flashing and everything, my phone ends up in a bootloop... I'm on 4.4.2, 183.46.10XT926, kernel 3.4.42 and an unlocked bootloader
Any help?
Click to expand...
Click to collapse
I know you stated you followed the directions, but just in case, this is what I do:
1. Boot into TWRP
2. Wipe cache, dalvik cache, data and system
3. Install CM11.
4. Install GAPPS
5. Wipe cache and dalvik (from the Install screen)
6. Reboot and profit.
If this still doesn't work for you, you might have a corrupted download for CM11 and/or GAPPS, so try downloading them again and make SURE you are using the correct CM11 image.
If you are getting them from epinter, then make sure you choose the correct one. There are a LOT of ROM images there (for XT925, for CM10 for JB-based phones, CM11 xt926 I believe is for JB based phones, you want the CM11 with msm9690 in the file name).
I get mine from here -> http://download.cyanogenmod.com/?device=moto_msm8960
Also, make sure you have the correct TWRP installed (2.7.1.0) that is KK based. Do NOT use earlier versions which are based off of JB.
You can also use CWM recovery, but make sure it's 6.0.4.9. Anything else is for JB-based phones that haven't been upgraded to KK.
Thanks for all the replies. I just did a standard wipe with TWRP so maybe thats the problem.
Another question, is the msm8960 CM11 compatible with XT926? I read somewhere that it was but i just want to make sure
That's what you want and it's what I linked you to.
Sent from my DROID RAZR HD using Tapatalk