Hello everyone
This is my first post, and I am a slight noob, so please bear with me.
I would like to flash my XT910 with a cyanogen mod. I have flashed the device before, to EU jellybean 4.1.2 (952.124.14.XT910.Retail.en.EU).
However, I now cannot get into recovery mode. The Orange motorola start screen comes up, and then a dead android with a red triangle with an exclamation mark comes up. I cannot get further than this.
I have tried flashing a custom recovery using clockwork and TWRP. I have tried ROM manager, BMM, Rom Installer, etc. all to no avail.
Please can you tell me how to fix my recovery partition so i can flash?
Also I have rooted the device using this thread: http://forum.xda-developers.com/showthread.php?t=2298408 , which seems to be successful.
Thank you for any help!
Dev50
Related
I don't know if this has been asked before, I would however appreciate any MD on links to this problem.
I rooted my Lenovo Thinkpad in order to install ICS, but in the midst of installing CM9 ICS, the CWM recovery rebooted, and know I can't boot to my lenovo and everytime I try to install a ROM, it reboots in the middle of the process.
Help!
It has CWR Recovery v 5.0.2.7.
Tried flashing ICS CM9, but it rebooted in the middle of flashing, now I can't flash any ROM.
It is a ROW tablet. appreciated.
Help is greatly
After unlocking the bootloader and rooting my Moto G, my next task was to flash a custom ROM. I'm finding difficulty in this.
I can get on the the flashboot, but when I go into recovery mode, it quickly changes gives me the unlocked boot loader warning and brings up a android with a red exclamation mark saying "No command."
Now, as a noob of rooting androids, I have no idea what is happening
Please help?
Much appreciated thanks
You need a custom recovery to install custom rom.... There are lots of threads in q&a thread
Sent from my XT1033 using Tapatalk
Hi everyone,
I recently flashed my zte blade g with cm 10.1 . I did not liked it, so i decided to restore from cyanogenmod rom to stock rom (telenor serbia) via cwm recovery, i had problem with /sistem not being able to restore, so i formated /system and, again, wiped all data in phone, but i was still getting the same error. From my previous flash experience, i remembered that, in order to try different custom rom for my earlier phone, i needed to change the version of cwm recovery. So i tried to flash from 6.0.3.4 down to 5.0.2.0 version of cwm (which was a bad idea) , by editing flash.bat to flash different file to phone. And now, my phone turn on, enter in welcome screen (screen that show up first at the startup, before cyanogenmod loading animation, and before booting into recovery) and i cannot do anything except restarting it, i tried to reflash previous working cwm, but now it won't detect device.
Is there any way to solve it, since it is not yet fully dead?
Hi,
Thanks for using XDA Assist Please post it here Blade General for better response
Good Luck!
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.
I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.
i tried to install custom recovery on my device
segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS
i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz
NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
sainitish said:
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
Click to expand...
Click to collapse
Just download ur stock rom and flash it with SP flash tool