Hi everyone,
I recently flashed my zte blade g with cm 10.1 . I did not liked it, so i decided to restore from cyanogenmod rom to stock rom (telenor serbia) via cwm recovery, i had problem with /sistem not being able to restore, so i formated /system and, again, wiped all data in phone, but i was still getting the same error. From my previous flash experience, i remembered that, in order to try different custom rom for my earlier phone, i needed to change the version of cwm recovery. So i tried to flash from 6.0.3.4 down to 5.0.2.0 version of cwm (which was a bad idea) , by editing flash.bat to flash different file to phone. And now, my phone turn on, enter in welcome screen (screen that show up first at the startup, before cyanogenmod loading animation, and before booting into recovery) and i cannot do anything except restarting it, i tried to reflash previous working cwm, but now it won't detect device.
Is there any way to solve it, since it is not yet fully dead?
Hi,
Thanks for using XDA Assist Please post it here Blade General for better response
Good Luck!
Related
I flashed cwm recovery in ZTE Blade G2 v880h with sp flash tool. Then flashed stock rom using cwm recovery. The phone booted and everything was running fine. I rebooted phone and everything was still fine. Then I went to phone settings, selected update then sd card to update to latest version, the phone then restarted in cwm recovery, then the problem arised, now evrytime I power on the phone, it gets into cwm recovery, I've tried flashing the stock rom again but no change. I also wiped cache, dalvik cache, did factory reset from cwm, but nothing helped. The phone is stuck in cwm recovery mod. Please someone help
Hi,
Here is a very active thread about your device that you can ask for help in,
> ZTE Blade > Blade General > ZTE Blade G2 V880H
Good luck!
Thank you. Thread closed.
Hello Everyone, I am a Noob in Flashing Custom ROM...
I use Micromax Canvas A63 (Rooted)
I successfully Flashed Xperia Custom ROM in my Phone, But after Flashing it, My phone could'nt detect my SIM. There is no problem in my SIM card as i had used it on another mobile phone and it was working...
The major problem starts Now: -
After that, I Restored the Backup of the STOCK ROM and rebooted my device (in hope to reverse all the things back).. But after that it got stucked in Boot Loop and is not starting beyond that Xperia Animation.
I Tried lots of Methods like- WIpe Dalvik Cache, Format/Cache, Format Data etc.. but still it is stucked in boot loop..
PLEASE SOMEBODY TELL ME THE HOW TO CORRECT IT
Hi,
There's some link in the first post here, including your stock firmware. You can read this carefully and ask any questions you may have there too,
http://forum.xda-developers.com/showthread.php?t=2795960
Good luck!
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Fumpph said:
HEllo, I tied flashing my phone for rooting but since the USB didnt connect as the port is loose, the phone is still in debugging mode
Then I used framaroot from play store and rooted my device .. I used a ROM toolkit and installed a custom boot animation, now my phone is stuck on the bootloop .
I have tried wiping cache partition along with restore to default by going into the recovery mode, but it still doesnt work.
My device is on stock firmware and no custom recovery like CWM or TWRP is installed on it .
Please help .. what should I do next ?
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck.
Hey there this is my problem:
Yesterday i tried to mod my lg880. I used a all in one tool named "Revised-P880" and i think this is the problem, now i'm gonna explain.
I rooted my android, and it's all ok, then i unlocked bootloader and all was fine. After that i tried to install a Recovery like cwm or twrp and when i tried to boot my phone in Recovery it says "Recovery image error.... (i don't remember all the text) so i used that tool wich installed a menù called gboot menù v0.1 wich allow me to boot both recovery twrp or CWM. The strange is that since i installed that menù the wifi and mobile connection don't work anymore. I tried to install cm mod then, first 10.1.3 then 11 and it says "Error: This package is for p880(that is my phone); this device is x3(that is not!)".
Sorry for my bad english in any case i hope you can help me. I think that i have to erase all the thing i did in order to delete that gboot menù and put back the old recovery, the fact is that i can't erase that menù and i can't have my old recovery back.
ps: When i try to install everything via recovery the image of the android robot is splitted in two. I mean the green bot and the blue prisma are separated like an error.
Hi
Try posting your question here:
LG Optimus 4X HD Q&A
Experts for this device may be able to help.
Good luck.
Hi All,
I bought a Coolpad Note 3 Plus mobile last month,
I tried to install custom rom on it, so I have rooted my phone, it went very well.
Then I tried to go to recovery mode to flash the custom Rom, the mobile didn't boot to the recovery mode after some time of stock boot animation it boots to normal booting process.
Then I tried to factory reset my mobile that's also again boots to the normal boot and back to normal.
But, the mobile works well without any issues,
I tried to flash the custom recovery through Rom Manager app, Tmrw recovery & flashfy apps but no luck.
Can you please advise what to do get the recovery of mode and install CM12.1 custom Rom on it
Thanks in advance
sat_hish17 said:
Hi All,
I bought a Coolpad Note 3 Plus mobile last month,
I tried to install custom rom on it, so I have rooted my phone, it went very well.
Then I tried to go to recovery mode to flash the custom Rom, the mobile didn't boot to the recovery mode after some time of stock boot animation it boots to normal booting process.
Then I tried to factory reset my mobile that's also again boots to the normal boot and back to normal.
But, the mobile works well without any issues,
I tried to flash the custom recovery through Rom Manager app, Tmrw recovery & flashfy apps but no luck.
Can you please advise what to do get the recovery of mode and install CM12.1 custom Rom on it
Thanks in advance
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except this thread
All about Coolpad Note 3 ( ROOT, RECOVERIES,ROMS,FAQ,TIPS,TWEAKS)
Try posting your query there. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist