hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
sainitish said:
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
Click to expand...
Click to collapse
Just download ur stock rom and flash it with SP flash tool
Related
hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
segrecurs said:
I can't access to my custom recovery screen .... I am using micromax A-89 ninja ,,. When i m trying the right combinatins to enter the recovery screen (i.e. power button + vol. Up button ) but i m not able to get into it .,. I used it many times before... And after rooting my device also used the recovery. But i tried to install a custom and i was unsuccessfully in installing any other custom recovery tool. I tried using boot manager to install the custom rom (s5 for A89) but there i was unabe to get into my c.r. screen ., it stucks on logo and automatically reboots my phone again.
Plzzzzzzzz help me .
Is this a soft brick or anything else.... I m able to use my phone perfectly but cant enter the recovery tool.
Help me.
Click to expand...
Click to collapse
I'm a little bit confused on what you've posted but I will try to help. First I need a little bit more detail as did you Install a custom ROM but you were not succesfull and since then you have not been able to get into recovery or did you try to install a custom recovery and were unsuccessful?
If it is the latter then you will need to succesfully flash a recovery (Stock or Custom) in order to enter this section of the device, if it is the first then I would recommend attempting to reflash the devices stock firmware and starting from the beginning as it appears for both of these potential scenarios that the custom recovery is corrupted or is getting stuck when loading a particular section to work.
I didn't understood. Please guide me for my next step. Weather i should go for firmware or to install a cwm.
i tried to install custom recovery on my device
segrecurs said:
i tried to install custom recovery on my device
Click to expand...
Click to collapse
Are you able to boot normally into android OS..or is it just powering off automatically or is it happening when you try to go to recovery
If you can boot normally into android its not a softbrick but you might get one
Follow this thread http://forum.xda-developers.com/showthread.php?p=38110405#post38110405 if you want to install CLOCK WORK MOD RECOVERY using a computer if your phone doesn't boot...? No worries
DONT FORGET TO THANK THE HARDWORKERS
i m sorry to say but my phone just got hard bricked......now it stuck on the boot logo.....
help me
plzzzzzzzzz
NEEED help plzz..
i got my device into bootloop. i am using micromax a 89. i got stuck in boot loop and i cant enter in my stock recovery. is there any other way to get out of this. plz tell me
I was using custom ROM without taking backup of previous version and I factory reset my devise then operating system also got deleted and i stuck on CWM recovery
when i tried to install another ROM it gets successfully installed but Samsung logo comes and again CWM recovery opens
i tried a lot but same thing happens, i tried to use Odin but it is not detecting my devise
plz help me to see something on phone except recovery
Samsung galaxy core I8262
That means that you're flashing incompatible software, then, as your device is unable to found a bootable boot image, it gaves up and decides to go to the recovery, to "tell you" to flash another ROM.
I moved this to the Galaxy Core forum to get more replies.
My solution would be Odin flash 100% stock, boot to make sure it boots, then Odin flash CWM and then reflash the custom ROM.
Rhushi said:
I was using custom ROM without taking backup of previous version and I factory reset my devise then operating system also got deleted and i stuck on CWM recovery
when i tried to install another ROM it gets successfully installed but Samsung logo comes and again CWM recovery opens
i tried a lot but same thing happens, i tried to use Odin but it is not detecting my devise
plz help me to see something on phone except recovery
Samsung galaxy core I8262
Click to expand...
Click to collapse
flash this recovery using cwm
http://forum.xda-developers.com/gal...recovery-twrp-3-0-2-0-samsung-galaxy-t3468405
then use this rom enjoy
http://forum.xda-developers.com/gal...t-cyanogenmod-11-samsung-galaxy-core-t3468602
Just use TWRP. CWM doesn't work properly on Core.
I just flashed my blackview bv5500, with the stock rom using mediatek sp flash tool, before flash I made "format whole flash" (probably this was the mistake)
After this I flashed from download tab and got ok message at the end. But when I try to switch on the device the screen switches on because I see the light, but it is stuck on black and no any logo.
Is there any solution for this?
Thank you for your help I promise to help back when I can
Nice! I solved with different rom for brick problem, but original problem still there, device always boot in recovery mode and no any way to boot on android
Any help on this problem? My device always boot in recovery
Same problem, what ROM did you use to fix it and get your screen back ?
I managed to install twrp but the cell phone in the samsung logo was restarted every time, I had to re-flick the stock rom since I was left in an infinite loop, if you could help me I will be very grateful
u need to flash after ur flash twrp
vbmeta​check this link : https://forum.xda-developers.com/t/aosp-11-unofficial-samsung-sm-a125f-twrp.4317131/post-85548663
BryanCp13 said:
I managed to install twrp but the cell phone in the samsung logo was restarted every time, I had to re-flick the stock rom since I was left in an infinite loop, if you could help me I will be very grateful
Click to expand...
Click to collapse
Pre root the stock rom before installing twrp. Because there is no cusom kernel currently to fix that issue for our a12.