I just flashed my blackview bv5500, with the stock rom using mediatek sp flash tool, before flash I made "format whole flash" (probably this was the mistake)
After this I flashed from download tab and got ok message at the end. But when I try to switch on the device the screen switches on because I see the light, but it is stuck on black and no any logo.
Is there any solution for this?
Thank you for your help I promise to help back when I can
Nice! I solved with different rom for brick problem, but original problem still there, device always boot in recovery mode and no any way to boot on android
Any help on this problem? My device always boot in recovery
Same problem, what ROM did you use to fix it and get your screen back ?
Related
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
Hello,
I need an urgent help as my device has stopped booting. When i turn it on the logo appears and then some red messages on top of the screen appear and then it goes to download mode automatically with "NO KERNAL" message. Recovery mode isn't working. I tried flashing CWM and ICS official ROM via ODIN and all these ended in faliure. It seems not a brick case. Does anyone have an idea what is this problem and how to solve it. Thanks in advance for your answers.
Ronnie1990 said:
Hello,
I need an urgent help as my device has stopped booting. When i turn it on the logo appears and then some red messages on top of the screen appear and then it goes to download mode automatically with "NO KERNAL" message. Recovery mode isn't working. I tried flashing CWM and ICS official ROM via ODIN and all these ended in faliure. It seems not a brick case. Does anyone have an idea what is this problem and how to solve it. Thanks in advance for your answers.
Click to expand...
Click to collapse
Using ODIN flash official GB ROM.
I have gone through this problem.
I flashed stock ics rom using Odin, then the phone was stuck at boot animation.
Then i flashed twrp recovery and restored my backup of omni rom.
Done.
My my Tab can only use ODIN MODE
but when i want to boot onto recovery nothing happended just blank/black screen ..
before i got i this i use the twrp as recovery .. then i flash kitkit on the recovery as usual then appear the boot screen zappss black screen...
When That happen i just download the stock formware and flash with odin then process stucked at factoryfs.img..
is this problem with the battery drained out
usb cable not oem (use cheaper one)
or anything ...
Could you help me to figure what are the problem
ammin said:
My my Tab can only use ODIN MODE
but when i want to boot onto recovery nothing happended just blank/black screen ..
before i got i this i use the twrp as recovery .. then i flash kitkit on the recovery as usual then appear the boot screen zappss black screen...
When That happen i just download the stock formware and flash with odin then process stucked at factoryfs.img..
is this problem with the battery drained out
usb cable not oem (use cheaper one)
or anything ...
Could you help me to figure what are the problem
Click to expand...
Click to collapse
Try to flash again through ODIN if flashed successfully it should solve problem
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
sainitish said:
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
Click to expand...
Click to collapse
Just download ur stock rom and flash it with SP flash tool
pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!