Hey friends
i own an xperia p and im pretty good at flashing and moding!!
my friend wanted to root his xperia l and i tried d way we flash wid xperia p but i get status 7 error wen i flashed fxp cm11 !!its unlocked bootloader and rooted!!
jus let me know if you guys know wat is the error!!
my flashing method was
1.flash the whole ftf firmware and boot up.
2. then we flashed boot.img from fxp334 and booted into cwm
3.now apply zip and installed fxp rom but it said status 7 error.
can u guys help???
BTW WHICH ROM IS BETTER?? FXP OR OFFICIAL CM11??
for xperia p der is no official release or fxp cm11, so i need some suggestions too!!
thanks
vicky2131 said:
Hey friends
i own an xperia p and im pretty good at flashing and moding!!
my friend wanted to root his xperia l and i tried d way we flash wid xperia p but i get status 7 error wen i flashed fxp cm11 !!its unlocked bootloader and rooted!!
jus let me know if you guys know wat is the error!!
my flashing method was
1.flash the whole ftf firmware and boot up.
2. then we flashed boot.img from fxp334 and booted into cwm
3.now apply zip and installed fxp rom but it said status 7 error.
can u guys help???
BTW WHICH ROM IS BETTER?? FXP OR OFFICIAL CM11??
for xperia p der is no official release or fxp cm11, so i need some suggestions too!!
thanks
Click to expand...
Click to collapse
Do 1) wipe data factory reset
2)wipe dalvik
3)wipe cache
4)format system
Both are good but cm has nightlies support..well i personally never used both..vanir aosp,liquid smooth n pac r ones to try
Rohan purohit said:
Do 1) wipe data factory reset
2)wipe dalvik
3)wipe cache
4)format system
Both are good but cm has nightlies support..well i personally never used both..vanir aosp,liquid smooth n pac r ones to try
Click to expand...
Click to collapse
so my steps should be like
1.flash ftf(do i have to uncheck somethin in the flashtool??)
2.boot up
3. wipe cache,dalvik,system,factory reset
4.flash custom rom..
rite bro???
vicky2131 said:
so my steps should be like
1.flash ftf(do i have to uncheck somethin in the flashtool??)
2.boot up
3. wipe cache,dalvik,system,factory reset
4.flash custom rom..
rite bro???
Click to expand...
Click to collapse
First two steps not needed..u should have d just have d recovery that can flash fxp wic is kitkat n ftf is jb..
So just flash a kitkat kernel or philz recovery boot image and d wipe etc..flash ftf if something goes wrong..first do a nandroid backup
Rohan purohit said:
First two steps not needed..u should have d just have d recovery that can flash fxp wic is kitkat n ftf is jb..
So just flash a kitkat kernel or philz recovery boot image and d wipe etc..flash ftf if something goes wrong..first do a nandroid backup
Click to expand...
Click to collapse
ok bro wil try n let u no!!
Rohan purohit said:
First two steps not needed..u should have d just have d recovery that can flash fxp wic is kitkat n ftf is jb..
So just flash a kitkat kernel or philz recovery boot image and d wipe etc..flash ftf if something goes wrong..first do a nandroid backup
Click to expand...
Click to collapse
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??
SHANMU23 said:
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??
Click to expand...
Click to collapse
Are u sure downloaded d correct file?https://www.androidfilehost.com/?fid=23622183712462712
Here's d link ..dl again..
---------- Post added at 12:36 PM ---------- Previous post was at 12:33 PM ----------
SHANMU23 said:
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??
Click to expand...
Click to collapse
Extract d rom zip..n flash boot.img from flashtool..n flash d zip
---------- Post added at 12:40 PM ---------- Previous post was at 12:36 PM ----------
SHANMU23 said:
Hai Bro i did the same but it shows same STATUS 7 ERROR ... Now wat to do??
Click to expand...
Click to collapse
Well that error shouldnt come actually..its when something is wrong with updater script in meta-inf..as its saying!!dl from my link
The best way to avoid that "status 7 error" is by flashing via TWRP..
I"ve always kept this kernel on my device just in cased that i wanted to test Kitkat Roms as i'm regularly using stock JB fw with custom kernel.
Here is link to the kernel
If you're already have recovery, just flash it..
Make sure you read 1st what OP's mention there as it is dual recovery(TWRP & CWM)..If you entered CWM, you'll failed of course..
Do I have to put Kitkat kernel before installing the FXP334 ..BCZ Right now i have Extended kernel v6 which is JB kernel.
Thanks for the Fast reply Bro.
---------- Post added at 04:00 PM ---------- Previous post was at 03:07 PM ----------
faizalotai said:
The best way to avoid that "status 7 error" is by flashing via TWRP..
I"ve always kept this kernel on my device just in cased that i wanted to test Kitkat Roms as i'm regularly using stock JB fw with custom kernel.
Here is link to the kernel
If you're already have recovery, just flash it..
Make sure you read 1st what OP's mention there as it is dual recovery(TWRP & CWM)..If you entered CWM, you'll failed of course..
Click to expand...
Click to collapse
Using CIVIC kernel I tried but it says unable to mount "/system"..while installing cm11.zip
SHANMU23 said:
Do I have to put Kitkat kernel before installing the FXP334 ..BCZ Right now i have Extended kernel v6 which is JB kernel.
Thanks for the Fast reply Bro.
---------- Post added at 04:00 PM ---------- Previous post was at 03:07 PM ----------
Using CIVIC kernel I tried but it says unable to mount "/system"..while installing cm11.zip
Click to expand...
Click to collapse
Yes you need to flash the kitkat kernel first. And then insall fxp zip.
Hit thanks if it helped.
SHANMU23 said:
Do I have to put Kitkat kernel before installing the FXP334 ..BCZ Right now i have Extended kernel v6 which is JB kernel.
Thanks for the Fast reply Bro.
---------- Post added at 04:00 PM ---------- Previous post was at 03:07 PM ----------
Using CIVIC kernel I tried but it says unable to mount "/system"..while installing cm11.zip
Click to expand...
Click to collapse
Thats what i told u in my first post..u need a kk kernel n thats y ur getting d error..n haha u dont need twrp. Lol..!.extract boot.img frm kk rom..frm flashtool select kernel to flash in fastboot mode
Rohan purohit said:
Thats what i told u in my first post..u need a kk kernel n thats y ur getting d error..n haha u dont need twrp. Lol..!.extract boot.img frm kk rom..frm flashtool select kernel to flash in fastboot mode
Click to expand...
Click to collapse
TWRP is another way to flash Kitkat roms without accessing your pc..if the rom already have recoveries, there's no need flashtool and fastboot anymore...Just flash the kernel, at 1st blue light(TWRP),then it will go to red lights(CWM) because it is set to gave an option to user..
I think he's entered CWM thats why he's failing to flash..
faizalotai said:
TWRP is another way to flash Kitkat roms without accessing your pc..if the rom already have recoveries, there's no need flashtool and fastboot anymore...Just flash the kernel, at 1st blue light(TWRP),then it will go to red lights(CWM) because it is set to gave an option to user..
I think he's entered CWM thats why he's failing to flash..
Click to expand...
Click to collapse
Thanks Man Finaly I DID IT!!!!:good::good:
Related
Friends suggest me a good stable Rom for wt 19 i
Thanks in advance!
fanaticprakash said:
Friends suggest me a good stable Rom for wt 19 i
Thanks in advance!
Click to expand...
Click to collapse
hybroman 12 which i am using right now is extremely stable, everything working..
otherwise the cm 7.2 fxp 108 is stable too but without the stereo speaker and the walkman button..
performance wise, cm 7.2 is much better, with higher benchmarks
---------- Post added at 12:36 PM ---------- Previous post was at 12:35 PM ----------
fanaticprakash said:
Friends suggest me a good stable Rom for wt 19 i
Thanks in advance!
Click to expand...
Click to collapse
if you want to overclock, use rage kernel
Thanks Buddy!
could you give me the instructions to install hybroman 12..
fanaticprakash said:
could you give me the instructions to install hybroman 12..
Click to expand...
Click to collapse
just follow the ones given on the hybrom download site, it's pretty clear exact words,
Installation instructions
Needs unlocked bootloader
(actually hybrom does not contain a boot image.Thus, when you install hybrom you don't mess with your boot image at all.BUT recovery from nAa is installed in /system and while system is formated during the installation of hybrom,recovery messes with it self.That's why unlocked bootloader is necessary for now to install hybrom)
Copy the zip file to your SD card
Reboot your device in CWM
Make a full data wipe-factory reset
Wipe cache and Dalvik cache
Choose install zip from sd card
Wait for installation to end
Reboot
(First reboot after installation might take a while and screen gets totally black after boot animation is displayed for about a minute or twnly on first reboot)
Reboot a second time
Enjoy!
(If anyone gets stuck at se logo at first reboot,he should try this also: First make the data wipe, then install,then shutdown the device.Turn it on after about 10sec)
(Tested and confirmed by chrisbymoningka for v7)
Got some doubts..
1)What is the use of changing kernal??
2)please give me instructions to unlock the boot loader..
3)How to get CWM By installing Xrecovery or some otherway?
thank you
fanaticprakash said:
1)What is the use of changing kernal??
2)please give me instructions to unlock the boot loader..
3)How to get CWM By installing Xrecovery or some otherway?
thank you
Click to expand...
Click to collapse
1. changing kernel lets you overclock your phone, like use it at 1.2ghz, when you need it, i do not suggest it, as it decreases the battery life by a lot. also cpu governors, which is like the clock is limited to 600mhz at night, thus saving battery..
2. go to http://unlockbootloader.sonyericsson.com/ easy instructions given. remember this voids your warranty..
3.the custom kernels come with preinstalled CWM and root
Since I didn't install any kernel how can l go to cwm for my friend w8 I used x recovery ,but I didn't find x recovery for wt 19i
Sent from my WT19i
Hybrom working fine
thanks for the help i installed hybrom and rage kernal..
its working good....
fanaticprakash said:
Since I didn't install any kernel how can l go to cwm for my friend w8 I used x recovery ,but I didn't find x recovery for wt 19i
Sent from my WT19i
Click to expand...
Click to collapse
when i first installed recovery, it was through this batch script. the script is not mine, i cannot find the original thread where i found it.. read the instructions carefully
Anyway thanks buddy!
I installed the rage kernel first so i got cwm then i install the Hybrom 12 its good thanks Man!!
hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp
teja9490 said:
hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp
Click to expand...
Click to collapse
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom
sralli said:
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom
Click to expand...
Click to collapse
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance
teja9490 said:
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance
Click to expand...
Click to collapse
Did you try to install it again?
sralli said:
Did you try to install it again?
Click to expand...
Click to collapse
yes i have tried....same problem arise after installing...mobile i not booting
teja9490 said:
yes i have tried....same problem arise after installing...mobile i not booting
Click to expand...
Click to collapse
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??
ravenwing_15 said:
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!
Click to expand...
Click to collapse
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms
teja9490 said:
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms
Click to expand...
Click to collapse
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0
sralli said:
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??
Click to expand...
Click to collapse
yes,, i tried to install cwm its showing no space left on device what to do..
nothing i cant do without cwm..
i tried to unlock my bootloader also after i connected to pc its showing waiting for device..
pls help me..
---------- Post added at 02:48 PM ---------- Previous post was at 02:45 PM ----------
ravenwing_15 said:
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0
Click to expand...
Click to collapse
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...
abdul007 said:
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...
Click to expand...
Click to collapse
Did you download it successfully?i get my stock rom at that site so i guess you too could get it..try download it again and extract it if still persist use the search bar and search for possible threads.
Here is another link of tutorials and firmwares are also included
Here. :good:
hi all
i am using stock rom DDLF2 (one file) downloaded from teashare.com and using BAM universal kernel 15 beta by xda_BAM. I tried to install CM11 but faced bootloop i.e stuck at samsung logo. now i want to install CM11 plz guide me which kernel and recovery should i use?i am really desparate to use this ROM. thanks in advance.
14 views but no reply??
Firat go to latest cwm and then install
King11amit said:
Firat go to latest cwm and then install
Click to expand...
Click to collapse
which cwm is compatible,will u be kind to elaborate the procedure.
pliss to.provide the link sir
and thanks for replying
Search on forum cant provide link ok
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
Which cwm version u r using
Flash cm10.2 then cm11 cwm upgrade is automatic
already tried that
let me clearify my situtation here
i was on CM10.2 and than tried to update to CM11 by directly flashing CM11 zip as directed by dhiru in the OP,i ended up in bootloop so i flashed DDLF2 yet bootloop resulted.I searched the forum and found BAM kernel as the solution and phone booted successfully.
now u want to flash cm11.can i do it directly or Do i need to flash a diffrent kernel or recovery first?
plz help.
Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003
sam_777 said:
Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003
Click to expand...
Click to collapse
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?
and one more noob question
what diffrence does it make if i install stock ROM DDLF2 using one file only or using 5 files(pit,bootloader,modem etc.) as suggested by sgtechwork in this thread.
forum.xda-developers.com/showthread.php?t=2329200
suripape said:
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?
Click to expand...
Click to collapse
You don't need kernel or cwm. Both are included in cm ROM.
Sent from my GT-I9003
Remove battery and place it back (turn off),
put your phone into download mode (vol down-home then power)
odin
place all the stock rom files (pit, ....)
start
and also I suggest you don't go for the CM11 yet, because it has some bugs as I tried it.
There are better stable roms for SL here.
HTH
I have tried to install cm12.1 nightly through cyanogen recovery and it got stuck in cyanogen fast bootmode .when I try to power on my device yu logo gets blink and auto turnoffs ...please help me ......in what way can I get back my phone ?? Can customer care solve the issue? :'(
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
arshad145 said:
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
Click to expand...
Click to collapse
No bro ...
While connected to system it cannot detect my device
Have you tried to search for ROMs for your phone model?
Google or Search at www.needrom.com
Take a note....
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
You are going for the most extreme case =/
arshad145 said:
You are going for the most extreme case =/
Click to expand...
Click to collapse
going serious,,,,?
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
arshad145 said:
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
Click to expand...
Click to collapse
Sorry bro....
I thought he is using chinese phone and got mediatek chipset....
---------- Post added at 09:36 AM ---------- Previous post was at 09:27 AM ----------
sai978 said:
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
Click to expand...
Click to collapse
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
aravazhi_mdr said:
Sorry bro
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
Click to expand...
Click to collapse
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
sai978 said:
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
Click to expand...
Click to collapse
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
arshad145 said:
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
Click to expand...
Click to collapse
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
aravazhi_mdr said:
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
Click to expand...
Click to collapse
I will try bro. But my question is can I flash this without unlocking bootloader
sai978 said:
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
Click to expand...
Click to collapse
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
sai978 said:
I will try bro. But my question is can I flash this without unlocking bootloader
Click to expand...
Click to collapse
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
arshad145 said:
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
Click to expand...
Click to collapse
Yes I have . but when I type the command fastboot oem unlock-go it says unable to unlock bootloader and the main thing is I can only enter cyanogen fastbootmode
aravazhi_mdr said:
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
Click to expand...
Click to collapse
Bro which is better to flash?? Boot.img or twrp.img
twrp is better as u can flash whole rom
---------- Post added at 18:14 ---------- Previous post was at 18:13 ----------
boot img will unlock bootloop but not neccessary if u need a working rom
my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
thinhx2 said:
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
Click to expand...
Click to collapse
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
anas_ahmad said:
my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Click to expand...
Click to collapse
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
santoshhh000 said:
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
Click to expand...
Click to collapse
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
thinhx2 said:
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
Click to expand...
Click to collapse
Which one is working?
santoshhh000 said:
Which one is working?
Click to expand...
Click to collapse
R.r 7
thinhx2 said:
R.r 7
Click to expand...
Click to collapse
Did flashing stock rom also not working for u?