hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp
teja9490 said:
hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp
Click to expand...
Click to collapse
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom
sralli said:
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom
Click to expand...
Click to collapse
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance
teja9490 said:
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance
Click to expand...
Click to collapse
Did you try to install it again?
sralli said:
Did you try to install it again?
Click to expand...
Click to collapse
yes i have tried....same problem arise after installing...mobile i not booting
teja9490 said:
yes i have tried....same problem arise after installing...mobile i not booting
Click to expand...
Click to collapse
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??
ravenwing_15 said:
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!
Click to expand...
Click to collapse
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms
teja9490 said:
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms
Click to expand...
Click to collapse
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0
sralli said:
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??
Click to expand...
Click to collapse
yes,, i tried to install cwm its showing no space left on device what to do..
nothing i cant do without cwm..
i tried to unlock my bootloader also after i connected to pc its showing waiting for device..
pls help me..
---------- Post added at 02:48 PM ---------- Previous post was at 02:45 PM ----------
ravenwing_15 said:
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0
Click to expand...
Click to collapse
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...
abdul007 said:
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...
Click to expand...
Click to collapse
Did you download it successfully?i get my stock rom at that site so i guess you too could get it..try download it again and extract it if still persist use the search bar and search for possible threads.
Here is another link of tutorials and firmwares are also included
Here. :good:
Related
I installed a custom rom sgalaxy.... after installing rom was working fine; untill I press the turn off button to lock my screen it blinked in white n black for few seconds n turned off n wen I press back power button/ try to turn on lock screen..., its not turning on.....
Any solutions?????
mailmyinbox said:
I installed a custom rom sgalaxy.... after installing rom was working fine; untill I press the turn off button to lock my screen it blinked in white n black for few seconds n turned off n wen I press back power button/ try to turn on lock screen..., its not turning on.....
Any solutions?????
Click to expand...
Click to collapse
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
vneogi199 said:
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
Click to expand...
Click to collapse
Thanks for d reply.... I solved the proble... Did same steps u mentioned....
how to flash lk.bin from v1 via sp tools plz help.me
Hey can u plzz help.me I have installed sgalaxy custom ROM on canvas 2 plus but the screen blinks as I lock it and after some time it totally offs plz help with complete steps to fix it plz plz pl pl plz
best solution is to flash whole rom again or try another rom
Sent from my Micromax A110Q using xda app-developers app
I have a micromax canvas 2. my niece played with the patterns and now its locked. And now it has been 18 hours but I cannot find anything. Nor the patterns can be unlocked. Please help.
if your mobile is root and cwm recovery is install just restore your mobile.
kamdarsuraj said:
I have a micromax canvas 2. my niece played with the patterns and now its locked. And now it has been 18 hours but I cannot find anything. Nor the patterns can be unlocked. Please help.
Click to expand...
Click to collapse
you have already posted a thread DO NOT SPAM OTHER PEOPLE'S POSTS WITH YOUR OWN QUESTIONS NOT RELATED TO THE TOPIC
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
Adil Rishi said:
if your mobile is root and cwm recovery is install just restore your mobile.
Click to expand...
Click to collapse
Please give valid solutions :| not stupid ones... he has installed a custom rom... isnt it obvious it is rooted and has CWM?
abhimanyu bajaj said:
you have already posted a thread DO NOT SPAM OTHER PEOPLE'S POSTS WITH YOUR OWN QUESTIONS NOT RELATED TO THE TOPIC
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
Please give valid solutions :| not stupid ones... he has installed a custom rom... isnt it obvious it is rooted and has CWM?
Click to expand...
Click to collapse
so just restore his mobile reinstall the same rom or install another rom.
Adil Rishi said:
so just restore his mobile reinstall the same rom or install another rom.
Click to expand...
Click to collapse
You dont seem to understand the problem... HE WANTS TO USE THE DAMN ROM AND WANTS AN FREAKING SOLUTION ON *THAT VERY ROM*
vneogi199 said:
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
Click to expand...
Click to collapse
After flashing color os 2, once i lock the screen it cant be turned on. Only menu, home and back buttons glow up. Will flashing lk.bin work on this? What are the steps to flash it? Can I us CWM for this?
Plz help me how to flash lk.bin
mailmyinbox said:
Thanks for d reply.... I solved the proble... Did same steps u mentioned....
Click to expand...
Click to collapse
I've also same problem with my screen.
I've installed sGalexy ROM.
I've all required files.
but i dont know how to flash lk.bin file via sp flash
plz help me...
thnx
try factory reset from default recovery. it helped me once. try pressing the power and vol down simultaneously while switched off. it should recovery.
Help ME please
vneogi199 said:
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
Click to expand...
Click to collapse
I install a custom rom when the rom is install and it stuck on boot logo and it take 1 hour after tht i remove baatery of my phone and instert battery again after that i push the power button but it not opening i also flash a stock rom v3 but same problem help me plz (mmx a110q )
mailmyinbox said:
I installed a custom rom sgalaxy.... after installing rom was working fine; untill I press the turn off button to lock my screen it blinked in white n black for few seconds n turned off n wen I press back power button/ try to turn on lock screen..., its not turning on.....
Any solutions?????
Click to expand...
Click to collapse
Bro it call deep sleep bug... U need to flash this..
http://d-h.st/FlD
http://d-h.st/tle
Click this links and download the Uboot V1 or Uboot V3
Flash one of this and see... Not work flash another...
mailmyinbox said:
Thanks for d reply.... I solved the proble... Did same steps u mentioned....
Click to expand...
Click to collapse
can you send me lk.bin file plz....i am facing the same problem as u did
Hi to everyone i was found it and want to share with you (-:
first you need download kingoroot and vroot
http://www.kingoapp.com/android-root/download.htm
http://www.mgyun.com/en/getvroot
connect your phone with usbdebugging enabled
run kingoroot click root let it do his work after a moment device must be restarted and kingoroot say root failed OK
close kingoroot then run vroot and reroot and DONE (-: (-: (-: (-: (-:
what do u mean by odin As boot
what do you mean by odin As boot
Rocked!
rasoulcarrera said:
First flash recovery.tar(tanks to sahaj360) by odin
And i know, it cant go to recovery mode...
turn off the phone ,flash the boot which i attached below via odin AS boot
and itself gone to recovery automatically , you can now install superuser
Click to expand...
Click to collapse
Excellent work bro! Worked very smoothly, you rock!
---------- Post added at 11:50 PM ---------- Previous post was at 11:33 PM ----------
teja11111 said:
what do you mean by odin As boot
Click to expand...
Click to collapse
It means flash the BOOT file as BOOTLOADER in Odin. Here are the steps I did, in detail.
Make sure you have copied the superuser.zip to your SDcard before you begin.
- Flash the recovery as PDA (I unchecked the autoboot, just to keep everything in control)
- Remove data cable
- Remove battery for a few seconds and put it back
- Go in download mode again, and flash the BOOT file as BOOTLOADER (This time, checked the autoboot option)
- Phone starts in CWM recovery
- Flash the SU
In case you're still having trouble, go to http://www.sammobile.com/firmwares/ and search for s7262, download the kernel for YOUR COUNTRY and flash it as PDA through Odin. Then follow the above steps.
Don't forget to thank the guy
zeeshanusuf said:
Excellent work bro! Worked very smoothly, you rock!
---------- Post added at 11:50 PM ---------- Previous post was at 11:33 PM ----------
It means flash the BOOT file as BOOTLOADER in Odin. Here are the steps I did, in detail.
Make sure you have copied the superuser.zip to your SDcard before you begin.
- Flash the recovery as PDA (I unchecked the autoboot, just to keep everything in control)
- Remove data cable
- Remove battery for a few seconds and put it back
- Go in download mode again, and flash the BOOT file as BOOTLOADER (This time, checked the autoboot option)
- Phone starts in CWM recovery
- Flash the SU
Don't forget to thank the guy
Click to expand...
Click to collapse
Your welcome bro...
Tanks for explanation...
rasoulcarrera said:
Your welcome bro...
Tanks for explanation...
Click to expand...
Click to collapse
You're welcome!
That's the least I could do!
Thankyou @rasoulcarrera
Sent from my GT-S7262 using Tapatalk
Woops!
rasoulcarrera said:
Your welcome bro...
Tanks for explanation...
Click to expand...
Click to collapse
Ok so now that we've installed SU, how can we get the old bootloader back? Cu's the phone is just going into recovery now and not booting.
So I'm back on the original kernel. Which doesn't have SU
zeeshanusuf said:
Ok so now that we've installed SU, how can we get the old bootloader back? Cu's the phone is just going into recovery now and not booting.
Click to expand...
Click to collapse
What? There is problem after flashing su file?
Sent from my GT-S7262 using Tapatalk
zeeshanusuf said:
Ok so now that we've installed SU, how can we get the old bootloader back? Cu's the phone is just going into recovery now and not booting.
So I'm back on the original kernel. Which doesn't have SU
Click to expand...
Click to collapse
Try this
Turn off the phone
Pull out the battery
After ten seconds turn on your phone...
Is it helped?
rasoulcarrera said:
Try this
Turn off the phone
Pull out the battery
After ten seconds turn on your phone...
Is it helped?
Click to expand...
Click to collapse
No progress. The screen goes white as soon as the samsung boot sound starts. Any chance you have a copy of the original bootloader? We can flash that after installing SU.
---------- Post added at 01:20 AM ---------- Previous post was at 01:13 AM ----------
updown69 said:
What? There is problem after flashing su file?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Actually I think it's the bootloader. Just worked fine the first time.. After second boot I'm getting white screen (same thing that used to come previously when I flashed recovery). Let's see if this gets fixed, otherwise this whole operation would just die.
Lesson here is: Cheaper android phones are crap . I'm using an HTC amaze, and it was one hell of a task to root it! But at least it responded to logic.
zeeshanusuf said:
No progress. The screen goes white as soon as the samsung boot sound starts. Any chance you have a copy of the original bootloader? We can flash that after installing SU.
Click to expand...
Click to collapse
Ok in Samsung-update.com site search for this rom
S7262JVUAMK flash it
And then try root your phone by my method
Or if you have your old kernel you can now flash it
And still with SU
rasoulcarrera said:
Or if you have your old kernel you can now flash it
And still with SU
Click to expand...
Click to collapse
Yup, All done!
Thanks man!
@updown69
zeeshanusuf said:
No progress. The screen goes white as soon as the samsung boot sound starts. Any chance you have a copy of the original bootloader? We can flash that after installing SU.
---------- Post added at 01:20 AM ---------- Previous post was at 01:13 AM ----------
Actually I think it's the bootloader. Just worked fine the first time.. After second boot I'm getting white screen (same thing that used to come previously when I flashed recovery). Let's see if this gets fixed, otherwise this whole operation would just die.
Lesson here is: Cheaper android phones are crap . I'm using an HTC amaze, and it was one hell of a task to root it! But at least it responded to logic.
Click to expand...
Click to collapse
bro in white screen condition press power button i.e. first option is reboot now.
please help
rasoulcarrera said:
Or if you have your old kernel you can now flash it
And still with SU
Click to expand...
Click to collapse
i got all white without goint going recovery please help i cant do any thing . if pssible give me your old bootloop please please
vishal.ghodake said:
i got all white without goint going recovery please help i cant do any thing . if pssible give me your old bootloop please please
Click to expand...
Click to collapse
first download this rom http://dl.nikatel.ir/file.flash/sam/S7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4_Nikatel.ir.rar
flash it and then try root it by the method
rasoulcarrera said:
first download this rom http://dl.nikatel.ir/file.flash/sam/S7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4_Nikatel.ir.rar
flash it and then try root it by the method
Click to expand...
Click to collapse
Which Rom is it sorry to interrupt? Csc (Region)please? I also want to do a flash.
Sent from my GT-S7262 using Tapatalk
updown69 said:
Which Rom is it sorry to interrupt? Csc (Region)please? I also want to do a flash.
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
s7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4
i think it's must be middle east update
rasoulcarrera said:
s7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4
i think it's must be middle east update
Click to expand...
Click to collapse
My original CSC is INS (India).
Sent from my GT-S7262 using Tapatalk
updown69 said:
My original CSC is INS (India).
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Not problem you can flash the rom witch I'm upload it
archive include 3 file bootloader,CSC,pda
Flash all by Odin
if you want to keep your CSC just skip it
Just flash bootloader and pda
Hey there.... a lot of people are asking for the ftf file for the dual sim version and it wasn't available online.... So here you go this is customized Indian version.....
link ------------------> https://drive.google.com/file/d/0B3ji0QHsh0tkUk00M19Ma3lTX2M/view
Flash via flashtool...
Thanks.
It just saved my stucked phone.
Can you say what was customized?
The ROM is running 100% fine in the brazilian version of the E3 D2212.
I did the root thing, and installed a custom kernel for memory swap.
Thank you for posting the ROM link.
henridoug said:
It just saved my stucked phone.
Can you say what was customized?
The ROM is running 100% fine in the brazilian version of the E3 D2212.
I did the root thing, and installed a custom kernel for memory swap.
Thank you for posting the ROM link.
Click to expand...
Click to collapse
It's customized because it has got those Indian apps such as sony liv and everything like that which I don't see on the other versions...But anyways.. as long as it helped you it's good... You're welcome.
Thank you so much for this great stuff
I downloaded this firmware for my phone d2212...i hope it will save my phone....i have some problem in my sony xperia E3dual (d2212)after rooting my phone ....i tried to add mx player pro as a system app just after restarting my phone...with the help of lucky patcher... i tried this process so many times for other apps too...but this this i was not good time...because sd card take some time to prepair to load apps to run on phone after restarting app...and between making mxplayer as a sustem app my phone got a big problem...it was unable to switch on...only cwm recovery is opening .......i will try to flash this firmware giver by you here to flash this from my lapton soon ...but i have a little cunfusion about flashing custom rom ....my problem is that....what is boot.img and kernal.img and clockwork mode recovery and busybox and supersu..........as i know little bit and learn from here only that...these are used and nessasary for rooted device (supersu and busybox) ..i downloaded latest firmware tool and java runtime and firmware ftf file to for my phone already...now i wanna know that i i flash this rom from flashtool then weather i loose my root access or not and it contain boot and kernal img already or not ....or i have to flash kernal img in fastboot mode first.....sorry for my some spelling mistakes ...i hope any one of you can helo me .....because now today i can't even open my cwm recovery too.. it stop on black screen with sony logo...i use power butoon and volume up key upto continous three vibrate to switch of my phone now....any help please i wanna only flash this file (D2212 18.5.B.0.26 Customized IN FTF )to ge my phone work
again
Thanks thank f9r giving time to read my this long msg ....waiting for response :crying:
CMPATIL said:
I downloaded this firmware for my phone d2212...i hope it will save my phone....i have some problem in my sony xperia E3dual (d2212)after rooting my phone ....i tried to add mx player pro as a system app just after restarting my phone...with the help of lucky patcher... i tried this process so many times for other apps too...but this this i was not good time...because sd card take some time to prepair to load apps to run on phone after restarting app...and between making mxplayer as a sustem app my phone got a big problem...it was unable to switch on...only cwm recovery is opening .......i will try to flash this firmware giver by you here to flash this from my lapton soon ...but i have a little cunfusion about flashing custom rom ....my problem is that....what is boot.img and kernal.img and clockwork mode recovery and busybox and supersu..........as i know little bit and learn from here only that...these are used and nessasary for rooted device (supersu and busybox) ..i downloaded latest firmware tool and java runtime and firmware ftf file to for my phone already...now i wanna know that i i flash this rom from flashtool then weather i loose my root access or not and it contain boot and kernal img already or not ....or i have to flash kernal img in fastboot mode first.....sorry for my some spelling mistakes ...i hope any one of you can helo me .....because now today i can't even open my cwm recovery too.. it stop on black screen with sony logo...i use power butoon and volume up key upto continous three vibrate to switch of my phone now....any help please i wanna only flash this file (D2212 18.5.B.0.26 Customized IN FTF )to ge my phone work
again
Thanks thank f9r giving time to read my this long msg ....waiting for response :crying:
Click to expand...
Click to collapse
you have to flash it with flashtool (I suppose you know how to do that) and yes it will take away all the root access so you will have to root your phone again(I suppose you know how to do that as well)... and you can make mx player your system app by using link2sd app though i don't understand why do u want to make it a system app???
ShanePunk123 said:
you have to flash it with flashtool (I suppose you know how to do that) and yes it will take away all the root access so you will have to root your phone again(I suppose you know how to do that as well)... and you can make mx player your system app by using link2sd app though i don't understand why do u want to make it a system app???
Click to expand...
Click to collapse
Thank you so much for your help... i think we can move apps to either in phone or in sd card from app to sd bro...and i am telling about making app as asystem app so thattmy those apps stay as usual even after factory reset ...thanks for your great help about flashing rom bro :highfive::good:
CMPATIL said:
Thank you so much for your help... i think we can move apps to either in phone or in sd card from app to sd bro...and i am telling about making app as asystem app so thattmy those apps stay as usual even after factory reset ...thanks for your great help about flashing rom bro :highfive::good:
Click to expand...
Click to collapse
you're welcome... thought link2sd app has an option of changing user apps to system apps.... see in the screenshot which i have attached... It's a better and secure way than using lucky patcher...
flashing error
ShanePunk123 said:
you're welcome... thought link2sd app has an option of changing user apps to system apps.... see in the screenshot which i have attached... It's a better and secure way than using lucky patcher...
Click to expand...
Click to collapse
hello bro thanks bro for your screen shot .... I am still unable to flash this custom ROM in my Android phone I can open only cwm Recovery....but can't boot to system,it stuck on sony logo when i try to start it normally...and when i tried to flash this above given rom on my D2212(sony Xperia E3 dual)i got an error msg that you have to keep check on
unknown app source and usb debug on,,, which is not possible for me because now i can't enter to that location,,,sorry for my weak English...i will try to add the screen shot of my flashing process soon so you can help me .......thanks once again i will be so happy if i can recover my phone back in good working condition
CMPATIL said:
hello bro thanks bro for your screen shot .... I am still unable to flash this custom ROM in my Android phone I can open only cwm Recovery....but can't boot to system,it stuck on sony logo when i try to start it normally...and when i tried to flash this above given rom on my D2212(sony Xperia E3 dual)i got an error msg that you have to keep check on
unknown app source and usb debug on,,, which is not possible for me because now i can't enter to that location,,,sorry for my weak English...i will try to add the screen shot of my flashing process soon so you can help me .......thanks once again i will be so happy if i can recover my phone back in good working condition
Click to expand...
Click to collapse
You don't have to worry about getting the usb debugging on.... just make sure you connect the phone in flash mode... to do so press the volume down button and connect to your pc while the volume button is pressed... a green led will flash once stating that it has been connected in flash mode to the pc... make sure your pc has drivers installed for sony and flashmode and fastboot mode... to do so install flashtool and it will install the important drivers even if it doesn't then you can go to the installation directory of flash tool on your pc and install the flashmode drivers manually. after that it's an easy process to flash the firmware and this is not a custom rom this is the stock 4.4.4 firmware customized india version. PS don't use windows 8 use windows 7.
Thanks bro finally I got my working phinr back?
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
When I was trying to flash this rom that 2 thinks keep me stressed
1 USB DEBUG and 2 Unknown source ?
Once again I opened my cwm recovery option as usual and there I changed system (umnount) to mount and again try to flash this rom,,, and what I see the flashing process completely done without any error,,????? and my phone is on my hand in working condition with stock rom ? I just don't know that after mounting system ,everything goes perfect,without asking for these above given two error msg... I think that process in cwm recovery activated both (usv debug and unknown source) ?????????
---------- Post added at 12:56 PM ---------- Previous post was at 12:46 PM ----------
CMPATIL said:
Thanks bro finally I got my working phinr back?
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
When I was trying to flash this rom that 2 thinks keep me stressed
1 USB DEBUG and 2 Unknown source ?
Once again I opened my cwm recovery option as usual and there I changed system (umnount) to mount and again try to flash this rom,,, and what I see the flashing process completely done without any error,,????? and my phone is on my hand in working condition with stock rom ? I just don't know that after mounting system ,everything goes perfect,without asking for these above given two error msg... I think that process in cwm recovery activated both (usv debug and unknown source) ?????????
Click to expand...
Click to collapse
CMPATIL said:
Thanks bro finally I got my working phinr back
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
When I was trying to flash this rom that 2 thinks keep me stressed
1 USB DEBUG and 2 Unknown source
Once again I opened my cwm recovery option as usual and there I changed system (umnount) to mount and again try to flash this rom,,, and what I see the flashing process completely done without any error,, and my phone is on my hand in working condition with stock rom I just don't know that after mounting system ,everything goes perfect,without asking for these above given two error msg... I think that process in cwm recovery activated both (usv debug and unknown source)
---------- Post added at 12:56 PM ---------- Previous post was at 12:46 PM ----------
Click to expand...
Click to collapse
Great...this happened to me once and turned out my windows didn't have proper drivers installed. Glad your phone is back to normal. Just keep it that way.
Good morning bro thanks???????????
---------- Post added at 02:48 AM ---------- Previous post was at 02:47 AM ----------
8 don't know how to attach screenshot here
---------- Post added at 02:50 AM ---------- Previous post was at 02:48 AM ----------
CMPATIL said:
Good morning bro thanks???????????
---------- Post added at 02:48 AM ---------- Previous post was at 02:47 AM ----------
i don't know how to attach screenshot here
Click to expand...
Click to collapse
how to attach photo herebro 8 wanna attach screenshot here for helping other too ?
CMPATIL said:
Good morning bro thanks
---------- Post added at 02:48 AM ---------- Previous post was at 02:47 AM ----------
8 don't know how to attach screenshot here
---------- Post added at 02:50 AM ---------- Previous post was at 02:48 AM ----------
how to attach photo herebro 8 wanna attach screenshot here for helping other too
Click to expand...
Click to collapse
See in the screen shot...this is the option for attaching a screen shot.
I got it now bro...actually I was...using my phone that's why I don't know......thank you bro for helping me every time:highfive::highfive::highfive::highfive:
[HELP]
I flashed this ROM on my phone, it does work.
But, when I go in CWM Recovery and format system, data, cache, etc. then flash this ROM, my phone gets stuck at the Sony logo screen.
Got any ideas why?
And, where can I get the stock ROM (which includes everything obviously, it must be more than 1 GB I guess)
Here is link bro it is( Indian ftf firmware)for Sony xperia E3 Dual[D2212] https://drive.google.com/file/d/0B3ji0QHsh0tkUk00M19Ma3lTX2M/view
---------- Post added at 05:30 AM ---------- Previous post was at 05:23 AM ----------
You just need to flash boot.img in fastboot mode first to get yours working cwm recovery again, then you can flash this rom bro,I will attach working boot_D2212.img for you with cwm recovey,..
CMPATIL said:
Here is link bro it is( Indian ftf firmware)for Sony xperia E3 Dual[D2212] https://drive.google.com/file/d/0B3ji0QHsh0tkUk00M19Ma3lTX2M/view
---------- Post added at 05:30 AM ---------- Previous post was at 05:23 AM ----------
You just need to flash boot.img in fastboot mode first to get yours working cwm recovery again, then you can flash this rom bro,I will attach working boot_D2212.img for you with cwm recovey,..
Click to expand...
Click to collapse
This link is from first page (OPs first page link post)
Already tried this, doesn't solve my problem but nvm.
It works for me bro,that's why I am sure about this firmware, you have downloaded D2212 boot img file first from net and then flash it,then you can get your cwm recovery back,and after that only you can flash this this rom,
My net slow now to can't attach d2212 boot imag flie here, may ne next time bro,the size of boot img is 15,326kb and 15326kb
CMPATIL said:
My net slow now to can't attach d2212 boot imag flie here, may ne next time bro,the size of boot img is 15,326kb and 15326kb
Click to expand...
Click to collapse
That doesn't make sense really.
As long as we can get to fastboot mode and necessary drivers are installed, we can flash ROMs via fastboot.
And, if we can get to flash mode and drivers are installed then we can flash ROMs via flashmode.
Flashing boot.img only gets us to CWM Recovery.
But, I'll do as you said and post back
I have tried to install cm12.1 nightly through cyanogen recovery and it got stuck in cyanogen fast bootmode .when I try to power on my device yu logo gets blink and auto turnoffs ...please help me ......in what way can I get back my phone ?? Can customer care solve the issue? :'(
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
arshad145 said:
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
Click to expand...
Click to collapse
No bro ...
While connected to system it cannot detect my device
Have you tried to search for ROMs for your phone model?
Google or Search at www.needrom.com
Take a note....
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
You are going for the most extreme case =/
arshad145 said:
You are going for the most extreme case =/
Click to expand...
Click to collapse
going serious,,,,?
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
arshad145 said:
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
Click to expand...
Click to collapse
Sorry bro....
I thought he is using chinese phone and got mediatek chipset....
---------- Post added at 09:36 AM ---------- Previous post was at 09:27 AM ----------
sai978 said:
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
Click to expand...
Click to collapse
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
aravazhi_mdr said:
Sorry bro
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
Click to expand...
Click to collapse
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
sai978 said:
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
Click to expand...
Click to collapse
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
arshad145 said:
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
Click to expand...
Click to collapse
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
aravazhi_mdr said:
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
Click to expand...
Click to collapse
I will try bro. But my question is can I flash this without unlocking bootloader
sai978 said:
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
Click to expand...
Click to collapse
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
sai978 said:
I will try bro. But my question is can I flash this without unlocking bootloader
Click to expand...
Click to collapse
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
arshad145 said:
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
Click to expand...
Click to collapse
Yes I have . but when I type the command fastboot oem unlock-go it says unable to unlock bootloader and the main thing is I can only enter cyanogen fastbootmode
aravazhi_mdr said:
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
Click to expand...
Click to collapse
Bro which is better to flash?? Boot.img or twrp.img
twrp is better as u can flash whole rom
---------- Post added at 18:14 ---------- Previous post was at 18:13 ----------
boot img will unlock bootloop but not neccessary if u need a working rom
my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
thinhx2 said:
Me too,bootloop logo leeco,flash rom okay but cant boot system,just stuck logo,and now twrp is loss,cant do anythings
Click to expand...
Click to collapse
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
anas_ahmad said:
my phone was running the viper custom rom when it suddenly went into bootloops , i tied to flash the rom again but the same thing happened. Finally i decided to do factory reset but due to my stupidity deleted the flash file from the phone too, now i am left with nothing in the phone memory and the adb sideload also fails . Please help asap , please
Click to expand...
Click to collapse
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
santoshhh000 said:
Try to flash twrp as u have done 1st time just connect it in fastboot... See if it works or flash stock rom using using sptool
..
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
If u have twrp ....connect phone to PC while twrp is on mtp will show up in PC ... another way is pushing your rom into phone using adb push command
Click to expand...
Click to collapse
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
thinhx2 said:
Done but i flashed 10 rom on xda but only one rom can boot,i think my emmc has problem or unstable,used le 1s about 2 year,will change phone
Click to expand...
Click to collapse
Which one is working?
santoshhh000 said:
Which one is working?
Click to expand...
Click to collapse
R.r 7
thinhx2 said:
R.r 7
Click to expand...
Click to collapse
Did flashing stock rom also not working for u?