Related
hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp
teja9490 said:
hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp
Click to expand...
Click to collapse
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom
sralli said:
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom
Click to expand...
Click to collapse
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance
teja9490 said:
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance
Click to expand...
Click to collapse
Did you try to install it again?
sralli said:
Did you try to install it again?
Click to expand...
Click to collapse
yes i have tried....same problem arise after installing...mobile i not booting
teja9490 said:
yes i have tried....same problem arise after installing...mobile i not booting
Click to expand...
Click to collapse
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??
ravenwing_15 said:
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!
Click to expand...
Click to collapse
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms
teja9490 said:
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms
Click to expand...
Click to collapse
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0
sralli said:
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??
Click to expand...
Click to collapse
yes,, i tried to install cwm its showing no space left on device what to do..
nothing i cant do without cwm..
i tried to unlock my bootloader also after i connected to pc its showing waiting for device..
pls help me..
---------- Post added at 02:48 PM ---------- Previous post was at 02:45 PM ----------
ravenwing_15 said:
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0
Click to expand...
Click to collapse
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...
abdul007 said:
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...
Click to expand...
Click to collapse
Did you download it successfully?i get my stock rom at that site so i guess you too could get it..try download it again and extract it if still persist use the search bar and search for possible threads.
Here is another link of tutorials and firmwares are also included
Here. :good:
Hello all,
I have been going slightly mad today trying to get my mate 7 2GB back from CWM to stock recovery. The main problem is that I do not have a stock recovery image. But after being shown where to find one, I noticed that I could not get it successfully flashed either.
Since I do not really know how to do this, I used flashify, but that did not work and either returned me to the CWM or sent me to rescue.
Can someone help me to a) get a stock recovery image for the Mate 7 version MT7-L09 and b) show me how to properly flash it?
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
djzero86 said:
Find stock recovery is easy.. only a question why flashify don't work for you? It work fine for me... your device is rooted?
Click to expand...
Click to collapse
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
dekraan said:
Hi @dzjero86, my device is rooted and I am on the B137SP03 version atm, using CWM. Don't know why Flashify is not working for flashing a recovery image. It works fine to flash a CWM recovery. Maybe I have the wrong stock recovery... If you can find it, can you send me the link or add it as an attachment here?
Click to expand...
Click to collapse
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
Ali_adel_medo said:
Please guys help me to . i have that same problem i have been trying to flash the stock recovery again but i couldn't even with flashify after i flash i takes me to bootloader screen and it shows me a fun_error message
I have a tl-10 device
Click to expand...
Click to collapse
You have a unlocked bootloader???
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Ali_adel_medo said:
Yes i have unlocked and rooted the phone using the cwm recovery and now a i can't flash the stock recovery any more
Click to expand...
Click to collapse
Do you tried flash via fastboot ?
fastboot flash recovery recovery.img
Or try to use this tool
http://forum.xda-developers.com/mat...custom-recovery-tool-mt7-l10-l10-mt7-t3022424
This should work.
The fast boot just stucks at waiting for device
And the tool you send says that the stock recovery works only on tl_09 and my device is tl_10
djzero86 said:
A way to find the stock recovery is : download the whole B137SP03 Rom from the Huawei site , and use a tool called "Firmware unpacker for Huawei" whit this tool you can extract the recovery.img from the Rom and try to flash it using flashify
Firmware unpacker
http://forum.xda-developers.com/mate-7/development/firmware-unpacker-huawei-t2879754
Rom
http://forum.xda-developers.com/mate-7/general/firmware-huawei-ascend-mate-7-b137sp03-t3041629
Pd : I am not a developer or anything similar but I have some years of experience rooting and etc ...
---------- Post added at 10:12 AM ---------- Previous post was at 10:00 AM ----------
You have a unlocked bootloader???
Click to expand...
Click to collapse
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
dekraan said:
Ok, I couldnt access your firmware unpacker, but I did manage to use the tool you suggested.
I have a different recovery screen, but is this the right one? It has EMUI large in centre screen and the options reboot system now, wipe data/factory reset and wipe cache partition.
If this is the correct one, and I am already on the D137SP03 ROM, I should be able to locally update right?
I tried this, and got a lot further this time, but my phone gave an error message during the update. Do I need to flash the original B137SP03 rom again, even though I am already on it?
Click to expand...
Click to collapse
Ok.... you have the stock recovery now???
djzero86 said:
I think you maybe can flash using adb commands and also you need adb drivers working
---------- Post added at 11:23 AM ---------- Previous post was at 11:15 AM ----------
Ok.... you have the stock recovery now???
Click to expand...
Click to collapse
I think so. If stock looks like I described: black screen, large EMUI logo, and the options reboot system now, wipe data/factory reset and wipe cache partition?
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
djzero86 said:
That's right... you have stock recovery... sometimes the update fail if the UPDATE.APP is on the internal storage.. try to flash from a micro sd card or re-download the update ....
English is not my first language...
Click to expand...
Click to collapse
Great, thank you for your fantastic help!
I will get a new micro-sd card tomorrow, and will try it right away!
Good luck... come back to report
djzero86 said:
Good luck... come back to report
Click to expand...
Click to collapse
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
dekraan said:
No luck so far.... I've downloaded the update.zip, put it in my mnt/ext_sdcard/dload folder and start the local update. It begins OK, as the progress bar moves along. But after about 25% it shoots to the end, and then I get an update failed screen with a red exclamation mark.
What could I try to get it to work??
Click to expand...
Click to collapse
Ok, I just reinstalled the B137P03 version from the how to install lollipop thread, and that went successful. Now going to try the update.zip! Keep you posted
Ah, now we're talking It seems to have worked. Phone is now showing 'Android is upgrading' and 'optimising app.....'
Great! It does seem strange I had to reinstall the B137SP03 rom, but that did the trick!
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
nishchay25 said:
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
Click to expand...
Click to collapse
Flash MIUI 6 version instead of 7.
Then try CM again.
But flashing MIUI should be done via Fastboot, so be sure to get the right version.
tried it!!
elot01 said:
Flash MIUI 6 version instead of 7.
Then try CM again.
But flashing MIUI should be done via Fastboot, so be sure to get the right version.
Click to expand...
Click to collapse
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
i too hav the same problem of rebooting continuously.Please help......
:crying::crying:
nishchay25 said:
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
Click to expand...
Click to collapse
...................
please help........really frustrated
nishchay25 said:
I have tried 6 as well 7 version of miui via fastboot everything goes well but it keeps restarting on its own !!
Click to expand...
Click to collapse
Atharva Logan said:
:crying::crying:...................
please help........really frustrated
Click to expand...
Click to collapse
Do you guys flash the miui 6 room using fFASTBOOT? Refer this link for the tutorial LINK
Fastboot rom is different from recovery rom because it has all the necessary files to return your device to complete stock rom as it includes recovery img, modem files etc. Try to flash the 6.6.10.0 or 6.6.5.0. Good luck
k
okay i will try.....Thank you
looping problem
i was burning my midnights oil for haplessely flashing Cm12.1.... nothing was happening...
later found out that i was not using miui dev ROM. then downloaded both 5.1 as well as 6.6...
still stuck at languages section... GAPPS was not the correct one. downloaded arm64 5.1 stock... voila.... running smooth since yesterday....
thanks @dh.harald & @omerjerk
now ready to try CM13
When you want a clean install, use the fastboot one. It seems to be a non-system partition problem, thus try flashing fastboot rom and see its outcome
I am trying to flash cm12 with miui 7 but it gone into bootloop then i restore into stock by using twrp recovery it comes to normal. Then i tried flashing resurrection rom it hangs at language point then it again it goes into bootloop. Plz tell me how to flash ROM..??
Sarthak1999 said:
I am trying to flash cm12 with miui 7 but it gone into bootloop then i restore into stock by using twrp recovery it comes to normal. Then i tried flashing resurrection rom it hangs at language point then it again it goes into bootloop. Plz tell me how to flash ROM..??
Click to expand...
Click to collapse
Use MIUI 6.6.10.0 or 6.6.5.0 and then flash any desired ROM on top of it. Else you may face problems and bootloops.
Yea its working thx
First tried installing ROM, went to boot loop, since there is no 6.6 ver I installed 6.11 dev version. later I tried to install all the ROMs(nameless, AICP, CM13, Bean, Resurr..) None worked. Now back to miui 7. Damm slow & pissed..
sreddy4u said:
First tried installing ROM, went to boot loop, since there is no 6.6 ver I installed 6.11 dev version. later I tried to install all the ROMs(nameless, AICP, CM13, Bean, Resurr..) None worked. Now back to miui 7. Damm slow & pissed..
Click to expand...
Click to collapse
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
faizauthar12 said:
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
Click to expand...
Click to collapse
http://en.miui.com/thread-144558-1-1.html
Is this the link to download & install through fastboot. Then change the ROM ?
If not Suggest.
sreddy4u said:
http://en.miui.com/thread-144558-1-1.html
Is this the link to download & install through fastboot. Then change the ROM ?
If not Suggest.
Click to expand...
Click to collapse
Ya
Use it...
Or use a small patch...
https://drive.google.com/file/d/0B_NyTBF8E1FZbktVVm41ZkJCb28/view
faizauthar12 said:
Ya
Use it...
Or use a small patch...
https://drive.google.com/file/d/0B_NyTBF8E1FZbktVVm41ZkJCb28/view
Click to expand...
Click to collapse
Tried to use the patch in miui update way. Unable to install.
faizauthar12 said:
Look at xiaomi thread for 6.6.10
6.11 dev it's Definitely different ....
Click to expand...
Click to collapse
I was on AICP official 26.12 build. When tried to update via OTA got boot loop. Then tried to do a clean instal of AICP both 26/12 and 28/12 build. but to no use. Still bootloop. After being frustrated I flashed Fastboot Rom of latest stable MIUI firmware (MIUI8) hoping it would take my device back to stock. But still phone restrts again and again on its own. Pls help me. I dont know what to do.
---------- Post added at 03:10 PM ---------- Previous post was at 03:08 PM ----------
nishchay25 said:
i tried flashing cm12.1 uber rom on my device with miui 7 5.8.15 but it went in bootloop so to fix that flashed the stock rom with miflash but still it keep on reatarting every few seconds i tried flashing through mi pc suit as well need help guys please help?? :crying:
Click to expand...
Click to collapse
Ur problem solved? I am having same headache. I dont know what to do
arunsebstn said:
I was on AICP official 26.12 build. When tried to update via OTA got boot loop. Then tried to do a clean instal of AICP both 26/12 and 28/12 build. but to no use. Still bootloop. After being frustrated I flashed Fastboot Rom of latest stable MIUI firmware (MIUI8) hoping it would take my device back to stock. But still phone restrts again and again on its own. Pls help me. I dont know what to do.
---------- Post added at 03:10 PM ---------- Previous post was at 03:08 PM ----------
Ur problem solved? I am having same headache. I dont know what to do
Click to expand...
Click to collapse
Clean flash other custom rom,see if the problem solve.
raymond_bqg said:
Clean flash other custom rom,see if the problem solve.
Click to expand...
Click to collapse
Yep. Tried already everything. No use. But today flashed miui 6.6.10. After that phone booted up to "loading apps" (ready to rock in background ). Then suddenly got off and the restarting phenomena started again. After MI logo restarts again. I m totally frustrated
arunsebstn said:
Yep. Tried already everything. No use. But today flashed miui 6.6.10. After that phone booted up to "loading apps" (ready to rock in background ). Then suddenly got off and the restarting phenomena started again. After MI logo restarts again. I m totally frustrated
Click to expand...
Click to collapse
I had the same issue tried everything but no use then flashed miui and went to service as the phn was in warranty they changed the mother board and gave it back to me!!
I have tried to install cm12.1 nightly through cyanogen recovery and it got stuck in cyanogen fast bootmode .when I try to power on my device yu logo gets blink and auto turnoffs ...please help me ......in what way can I get back my phone ?? Can customer care solve the issue? :'(
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
arshad145 said:
You are lucky its soft bricked not hard
You got backup of boot.img?
flash it to phone via fastboot
Click to expand...
Click to collapse
No bro ...
While connected to system it cannot detect my device
Have you tried to search for ROMs for your phone model?
Google or Search at www.needrom.com
Take a note....
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
You are going for the most extreme case =/
arshad145 said:
You are going for the most extreme case =/
Click to expand...
Click to collapse
going serious,,,,?
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
aravazhi_mdr said:
Do you included your kernel in cwm (i mean porting cwm)??
you have to flash stock recovery or working cwm recovery optionally(may be) boot.img
1. If u found a stock rom,confirm that the rom is working
2. Don't touch preloader coz it will make things worse...
3. use latest version of SP flash tool.
4. if u can't find a stock rom find a clone of your phone and use that (Kernal may be upgraded or downgraded)
5. Post a request of a boot.img and recovery.img
Click to expand...
Click to collapse
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
arshad145 said:
I meant no need for SP Flash Tool?
coz he got a Qualcomm? and not MTK?
So he needs QFIL not SPFT ... ?!
Click to expand...
Click to collapse
Sorry bro....
I thought he is using chinese phone and got mediatek chipset....
---------- Post added at 09:36 AM ---------- Previous post was at 09:27 AM ----------
sai978 said:
No bro.. I have not included kernel in cwm . I have downloaded a stock rom .but when I try to unlock my bootloader it says oem unlock not possible.how to flash it now? Pls send me the link of boot.IMG and recovery. Img
Click to expand...
Click to collapse
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
aravazhi_mdr said:
Sorry bro
please mention your mobile model and chipset.
you flashed cwm in fastboot and now it is locked....?
Click to expand...
Click to collapse
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
sai978 said:
Device name - yu yunique 4711
Got qualcom . I have flashed cyanogen recovery through twrp recovery and after that I have installed cm12.1 nightly and I forgot to wipe cache and tapped on reboot.now if I try to power on my device yu logo blinks and auto power offs. But I was able to enter cyanogen fastboot mode
Click to expand...
Click to collapse
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
arshad145 said:
WTF?! U flashed a recovery through another recovery!!!?
---------- Post added at 09:45 ---------- Previous post was at 09:44 ----------
ok =/ so.... u got stock recovery?
or can u go to any other place except fastboot??
Click to expand...
Click to collapse
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
aravazhi_mdr said:
So you have working TWRP....
Download Qualcom Image flash tool and flash TWRP then wipe data
try it
Click to expand...
Click to collapse
I will try bro. But my question is can I flash this without unlocking bootloader
sai978 said:
I can enter only fast boot mode bro. I have downloaded stock rom but bootloader got locked again bro. So I was not able to flash anything. When Itry to unlock it says oem unlock not possible
Click to expand...
Click to collapse
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
sai978 said:
I will try bro. But my question is can I flash this without unlocking bootloader
Click to expand...
Click to collapse
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
arshad145 said:
http://www.gizmoadvices.com/unlock-bootloader-on-yu-yunique-yu4711/
Have you tried this?
Unlocked bootloader then flash will work..
Click to expand...
Click to collapse
Yes I have . but when I type the command fastboot oem unlock-go it says unable to unlock bootloader and the main thing is I can only enter cyanogen fastbootmode
aravazhi_mdr said:
good to go....
use QIFT
---------- Post added at 11:02 AM ---------- Previous post was at 10:59 AM ----------
I also had that problem fastboot said have no permission....and can't do that...
as i have mediatek i flashed using SPFT
Click to expand...
Click to collapse
Bro which is better to flash?? Boot.img or twrp.img
twrp is better as u can flash whole rom
---------- Post added at 18:14 ---------- Previous post was at 18:13 ----------
boot img will unlock bootloop but not neccessary if u need a working rom
after trying to flash with twrp merlin .img file my phone is stuck on the warning bootloader unlocked screen . please help me as this is the only device that i have right now.
Merlin is the codename for Moto G Turbo, is that your device?
siredux said:
Merlin is the codename for Moto G Turbo, is that your device?
Click to expand...
Click to collapse
yes that is . motorola g turbo. what am i supposed to do now with my phone stuck on warning screen??
Are you hit ok when twrp ask to install supersu? If yes , restore your twrp backup and install supersu by your own , supersu 2.62.3 has no bootloops.
antonyjude30 said:
Are you hit ok when twrp ask to install supersu? If yes , restore your twrp backup and install supersu by your own , supersu 2.62.3 has no bootloops.
Click to expand...
Click to collapse
the only thing my phone does it stops on the bootloader screen i can only access only the recovery mode somehow and nothing else. it shows the teamwin screen. i dont knw wat to do after that. it was the latest supersu zip and i dont know wat went wrong.
flash the stock recovery or flash stock firmware.
xlr8sonic said:
the only thing my phone does it stops on the bootloader screen i can only access only the recovery mode somehow and nothing else. it shows the teamwin screen. i dont knw wat to do after that. it was the latest supersu zip and i dont know wat went wrong.
Click to expand...
Click to collapse
Did you make a TWRP back up before flashing SuperSU?
MrTooPhone said:
Did you make a TWRP back up before flashing SuperSU?
Click to expand...
Click to collapse
no i did not.
what can i do now
HelpMeruth said:
flash the stock recovery or flash stock firmware.
Click to expand...
Click to collapse
how can i do that ?
xlr8sonic said:
no i did not.
what can i do now
Click to expand...
Click to collapse
Without a backup, your only option is to re-flash stock firmware.
xlr8sonic said:
yes that is . motorola g turbo. what am i supposed to do now with my phone stuck on warning screen??
Click to expand...
Click to collapse
If I were you I would download stock firmware and flash it via fastboot to avoid any further inconviniences
I recommend flashing your factory firmware, which can easily be found on the forums here
siredux said:
If I were you I would download stock firmware and flash it via fastboot to avoid any further inconviniences
Click to expand...
Click to collapse
its is showing baseband error .. will it be gone if if i flash its firmware
xlr8sonic said:
its is showing baseband error .. will it be gone if if i flash its firmware
Click to expand...
Click to collapse
Sorry man , baseband errors normally result in no mobile network and ability to make phone calls :/. When I flashed marshmallow on my phone , it said not found next to baseband. You may want to fully flash MM then when it gets to bootloader unlocked screen , wait a few minutes. If it does nothing, try flashing twrp recovery and flashing a lollipop custom rom.
---------- Post added at 12:47 PM ---------- Previous post was at 12:47 PM ----------
xlr8sonic said:
its is showing baseband error .. will it be gone if if i flash its firmware
Click to expand...
Click to collapse
Also what baseband error are you getting ?
therealduff1 said:
Sorry man , baseband errors normally result in no mobile network and ability to make phone calls :/. When I flashed marshmallow on my phone , it said not found next to baseband. You may want to fully flash MM then when it gets to bootloader unlocked screen , wait a few minutes. If it does nothing, try flashing twrp recovery and flashing a lollipop custom rom.
---------- Post added at 12:47 PM ---------- Previous post was at 12:47 PM ----------
Also what baseband error are you getting ?
Click to expand...
Click to collapse
i attatched the imafe of the screen . i dnt knw exactluy wat baseband error it is
xlr8sonic said:
i attatched the imafe of the screen . i dnt knw exactluy wat baseband error it is
Click to expand...
Click to collapse
i also tried to flash the firmware .. but that showed zip signature varification. i also attatched the image for that
xlr8sonic said:
i also tried to flash the firmware .. but that showed zip signature varification. i also attatched the image for that
Click to expand...
Click to collapse
I had that error when flashing a new logo, I simply unchecked "check zip signature" in TWRP. All flashed OK.
MrTooPhone said:
I had that error when flashing a new logo, I simply unchecked "check zip signature" in TWRP. All flashed OK.
Click to expand...
Click to collapse
it says could not find ,META-INF/com/google/android/update-binary, int the zip file
error installing zip file xt1557_merlin_ritasia_6.0
Mate , no one noticed that you are trying to flash the ota zip in recovery. you are not meant to do that. Flash it using Fastboot. Go download Motorola device manager to get the right drivers, and get minimal adb and fastboot, when you have done that, come back here !
---------- Post added at 10:21 PM ---------- Previous post was at 10:20 PM ----------
xlr8sonic said:
i also tried to flash the firmware .. but that showed zip signature varification. i also attatched the image for that
Click to expand...
Click to collapse
You do realise you are trying to flash firmware files via recovery right..?
You are meant to extract the zip on the pc and then flash the files using fastboot commands
---------- Post added at 10:22 PM ---------- Previous post was at 10:21 PM ----------
MrTooPhone said:
I had that error when flashing a new logo, I simply unchecked "check zip signature" in TWRP. All flashed OK.
Click to expand...
Click to collapse
that trying to flash ota firmware files in twrp . that's why it failed
xlr8sonic said:
i also tried to flash the firmware .. but that showed zip signature varification. i also attatched the image for that
Click to expand...
Click to collapse
Try using mfastboot instead of fastboot, go with 6.0 firmware, make sure you flash all sparsechunks included. Baseband should be restored