Database Info

rom not boot

I have x10 mini.....
bootloader unlocked
flashed [KERNEL] nAa-12 ics
I can flash any kernel.....then I can flash any rom....
but rom never boot never started.....when I open the phone appeas the logo of kernel and then restart the phone
Why??

Are you using clockwork mod to flash the kernel? Are you clearing cache and dalvik cache before install of the kernel? Was the ROM working before trying to flash the kernel? Need more info!
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
Probably best to just start fresh. Make sure the ROM and kernel you want are on your SD Card.
1. Enter recovery
2. Wipe data/factory reset
3. Clear Cache Partition
4. Wipe Dalvik Cache
5. Install ROM from SD Card
6. Install Kernel from SD Card
7. Reboot phone

I enter recovery off nAa ics3 ....what kernel can I flash from sd after flashing rom???

Follow procedure above, you'll want to flash the ROM, then any supported kernel on top of it.
ToD

step 1-5 I ' m doing ever...I have x10 mini pro and I know something about flashing....I had never problem flashing any rom on x10 mini pro...

Thread title sound like caveman.
Sent from my coffee pot.

Why isn't this in the X10 Mini forum?

veeman said:
Why isn't this in the X10 Mini forum?
Click to expand...
Click to collapse
An obvious reason is the OP is kinda new and its HARD to navigate to that forum.

veeman said:
Why isn't this in the X10 Mini forum?
Click to expand...
Click to collapse
becouce I haven't the permision to write everywhere I want....I need to post 10 times first (rules of xda)

any ideas what can I do?

theskinnydrummer said:
thread title sound like caveman.
Sent from my coffee pot.
Click to expand...
Click to collapse
best. Comment. Ever. Cant. Stop. Laughing.

OptimusLove said:
best. Comment. Ever. Cant. Stop. Laughing.
Click to expand...
Click to collapse
I am not Laughing....idiots

[Q] [JB][Jan/04/2013]**~~** Slimbean for Xperia X10 v 2.0 **~~**

After installing Release 2 my phone looks stuck on the boot animation….slimbean name flickering animation….how long should I wait for the device to bootup….or is this an issue??? Though it is mentioned to wait patiently for 5-10 mins....it is testing my patience.
Please help.

zumit said:
After installing Release 2 my phone looks stuck on the boot animation….slimbean name flickering animation….how long should I wait for the device to bootup….or is this an issue??? Though it is mentioned to wait patiently for 5-10 mins....it is testing my patience.
Please help.
Click to expand...
Click to collapse
First 3 checks
1. Are you unlocked boot loader ??
2. Do you have cm10 kernel install ???
3. Did u do a clean install ???
If any answer of above questions is in no than do it before.
If all of your answer is yes and If its more than 10 minute remove your battery wait for 30 seconds put battery in and turn on the phone....
Still no luck than open a cwm go to mount and storage and check system is Mount or not
Still you are in boot loop wipe everything and install ROM as mentioned in the installation instruction wait for 10 minutes.
Still you don't get it boot, give logcat here
cheers
Raj
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

x10forevers said:
First 3 checks
1. Are you unlocked boot loader ??
2. Do you have cm10 kernel install ???
3. Did u do a clean install ???
If any answer of above questions is in no than do it before.
If all of your answer is yes and If its more than 10 minute remove your battery wait for 30 seconds put battery in and turn on the phone....
Still no luck than open a cwm go to mount and storage and check system is Mount or not
Still you are in boot loop wipe everything and install ROM as mentioned in the installation instruction wait for 10 minutes.
Still you don't get it boot, give logcat here
cheers
Raj
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I followed these steps...
Bootloader is Unlocked...used S1 tool to confirm this...I see a smallcase "r" --- Not sure if I am right here.
Made changes in the rom zip; META-INF\com\google\android\updater-script .... removed the lines as metioned in the post, re-zipped & copied rom to SD card
Using Flashtool flashed X10_4.0.4_scritch_BootManager_v5 for the recovery issue
Booted in recovery....followed all your install instructions
Installed the rom using above zip on SD card; once done installed the gapps....after completion rebooted
After reboot.....i get the bootscreen animation where its stuck
Let me if the steps I followed are correct
Thanks

zumit said:
I followed these steps...
Bootloader is Unlocked...used S1 tool to confirm this...I see a smallcase "r" --- Not sure if I am right here.
Made changes in the rom zip; META-INF\com\google\android\updater-script .... removed the lines as metioned in the post, re-zipped & copied rom to SD card
Using Flashtool flashed X10_4.0.4_scritch_BootManager_v5 for the recovery issue
Booted in recovery....followed all your install instructions
Installed the rom using above zip on SD card; once done installed the gapps....after completion rebooted
After reboot.....i get the bootscreen animation where its stuck
Let me if the steps I followed are correct
Thanks
Click to expand...
Click to collapse
*******************************************
I figured out my mistake
I was following you instruction on the main page & also these instrucions
Flash CM9 kernel using flashtool >> reboot your phone >> go to cwm recovery >> install ROM >> when installation finished remove your battery for 30 seconds and than put battery in and flash cm10 Kernel provided into OP >> reboot and you are done
I was missing the step of flashing the CM10 bootloader after OS installtion & after doing this the phone is UP
Thanks bro....Awesome to have JB on X10i :good:

zumit said:
*******************************************
I figured out my mistake
I was following you instruction on the main page & also these instrucions
Flash CM9 kernel using flashtool >> reboot your phone >> go to cwm recovery >> install ROM >> when installation finished remove your battery for 30 seconds and than put battery in and flash cm10 Kernel provided into OP >> reboot and you are done
I was missing the step of flashing the CM10 bootloader after OS installtion & after doing this the phone is UP
Thanks bro....Awesome to have JB on X10i :good:
Click to expand...
Click to collapse
That's why I have been telling read first before doing anything....
Now enjoy
Cheers
Raj
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

CM9 v5 download link down!
I must also install the CM9 v5 kernel, but unfortunately the download link is down and find nothing on Google.
I hope you can help me.
Thank you!

[Q] (Q) ¿Error al entrar en CWM?

Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!

hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.

matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk

CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!

that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.

CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?

matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.

CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this

CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2

CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!

Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors

@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.

CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks

matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.

vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!

matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps

Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made​​?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)

you need to wipe it 1st before flashing CM11 and Gapps...

Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS

[Q] [HELP] stuck at bootloop

hi all
i am using stock rom DDLF2 (one file) downloaded from teashare.com and using BAM universal kernel 15 beta by xda_BAM. I tried to install CM11 but faced bootloop i.e stuck at samsung logo. now i want to install CM11 plz guide me which kernel and recovery should i use?i am really desparate to use this ROM. thanks in advance.

14 views but no reply??

Firat go to latest cwm and then install

King11amit said:
Firat go to latest cwm and then install
Click to expand...
Click to collapse
which cwm is compatible,will u be kind to elaborate the procedure.
pliss to.provide the link sir
and thanks for replying

Search on forum cant provide link ok
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
Which cwm version u r using

Flash cm10.2 then cm11 cwm upgrade is automatic

already tried that
let me clearify my situtation here
i was on CM10.2 and than tried to update to CM11 by directly flashing CM11 zip as directed by dhiru in the OP,i ended up in bootloop so i flashed DDLF2 yet bootloop resulted.I searched the forum and found BAM kernel as the solution and phone booted successfully.
now u want to flash cm11.can i do it directly or Do i need to flash a diffrent kernel or recovery first?
plz help.

Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003

sam_777 said:
Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003
Click to expand...
Click to collapse
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?

and one more noob question
what diffrence does it make if i install stock ROM DDLF2 using one file only or using 5 files(pit,bootloader,modem etc.) as suggested by sgtechwork in this thread.
forum.xda-developers.com/showthread.php?t=2329200

suripape said:
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?
Click to expand...
Click to collapse
You don't need kernel or cwm. Both are included in cm ROM.
Sent from my GT-I9003

Remove battery and place it back (turn off),
put your phone into download mode (vol down-home then power)
odin
place all the stock rom files (pit, ....)
start
and also I suggest you don't go for the CM11 yet, because it has some bugs as I tried it.
There are better stable roms for SL here.
HTH

[ROM][UNOFFICIAL] Nougat custom rom for Huawei Y6 PRO [TIT-AL00]

This is really tricky method, as there are no clear guide in english, so i have collected information from different sites and compiled this guide.
Warning, after phone will do optimization every time you restart it.
Imp .. Bootloader needs to be unlocked in order to install this ROM (How to unlock bootloader?) Mod Edit: Link removed
Once bootloader unlocked, download and install TWRP & Root files from This Link Mod Edit: Link removed
Make sure USB debugging enabled and have made a full backup of the mobile
once TWRP is installed download the custom firmware from This Link http://corneey.com/wwX0JD
and Copy the rom to SDCARD and install it from TWRP recovery Mode and dont forget to install GAPPS after installing the ROM

not working all recovery

can you post the screen shot and model num of the phone please

omid.kurd said:
not working all recovery
Click to expand...
Click to collapse
Did you unlock the bootloader ? if you did not then you cant root the mobile and install this rom

now fixed just one of twrp working

@abidullah
Hi, Unfortunately I flashed boot_enjoy5_5s.img to boot partition and my phone get boot loop and can not go to recovery mode.
I try volume up/down and power that does not work.
and adb and fastboot does not recognize my phone.
do you know any way that I can boot in recovery mode.
thanks

ahmad829 said:
Hi, Unfortunately I flashed boot_enjoy5_5s.img to boot partition and my phone get boot loop and can not go to recovery mode.
I try volume up/down and power that does not work.
and adb and fastboot does not recognize my phone.
do you know any way that I can boot in recovery mode.
thanks
Click to expand...
Click to collapse
Finally worked!
After many retry, I can boot in recovery and flash ROM.
if anybody have similar problem just remove sim card and memory and try boot to recovery mode by press volume up and power.

Screenshots?
Is it AOSP or EMUI based?

MuhammadBilal said:
Screenshots?
Is it AOSP or EMUI based?
Click to expand...
Click to collapse
check this http://www.resurrectionremix.com/

Does this ROM work straightforward without any bugs?
If so I will flash it on my Huawei TIT-AL00. Thanks in advance.

will it work on my tit-u02?
I cant find any roms for this model and sick of it! lmao
so can I try to flash this rom? is it tested already? will my device brick?(hopefully not)

Boybato said:
I cant find any roms for this model and sick of it! lmao
so can I try to flash this rom? is it tested already? will my device brick?(hopefully not)
Click to expand...
Click to collapse
I flash this rom on my phone (Y6 Pro AL-00) and it work perfectly.
and about brick? if you do flash correctly there is no problem.
good luck

ahmad829 said:
I flash this rom on my phone (Y6 Pro AL-00) and it work perfectly.
and about brick? if you do flash correctly there is no problem.
good luck
Click to expand...
Click to collapse
but my phone is TIT-U02? and it said for TIT-AL00 only huhu

Thnx man

Does Otg support on this ROM?

Vinodsasanka said:
Does Otg support on this ROM?
Click to expand...
Click to collapse
I dont tink so

@abidullah
Sir does it work with TIT-U02?

Vinodsasanka said:
Does Otg support on this ROM?
Click to expand...
Click to collapse
no
---------- Post added at 11:33 PM ---------- Previous post was at 11:24 PM ----------
JavenX said:
Does this ROM work straightforward without any bugs?
If so I will flash it on my Huawei TIT-AL00. Thanks in advance.
Click to expand...
Click to collapse
Bug : no OTG support

Better then Emui/original rom...
abidullah said:
This is really tricky method, as there are no clear guide in english, so i have collected information from different sites and compiled this guide.
Warning, after phone will do optimization every time you restart it.
Imp .. Bootloader needs to be unlocked in order to install this ROM (How to unlock bootloader?)
Once bootloader unlocked, download and install TWRP & Root files
Make sure USB debugging enabled and have made a full backup of the mobile
once TWRP is installed download the custom firmware
and Copy the rom to SDCARD and install it from TWRP recovery Mode and dont forget to install GAPPS after installing the ROM
Click to expand...
Click to collapse
Thanks dude this rom is amazing i'am impressed by your work .:good:
Cons/bugs:
1) No otg support ( otg is not important for me)
Pros:
1)Ram availability is upto 1300 (in original rom i got 700 to 800).
2) More internal space: After installation this rom takes 1gb of space only.
3) It has OpenGl es 3.1 good for graphics/gaming.
4) SE linux can be changed between permissive and enforcin .(i used app for that)
i guess thats all i found so far but this rom is great fo my device (Huawei y6 pro Tit-al00)
again thanks Abidulla and thankyou Xda.

Don't I have to wipe cache, wipe data, format mount in the process of installing this Rom?