Database Info

[A700] [HowTo] Update German Version to JB

Hi!
Just found a way to update to JB from the 1.053 version (Acer_AV043_A700_RV22RC03_EMEA_DE) on wich every other update failed for me. But runs with the other versions, too.
Unlock Bootloader
Install CWM (6.0.1.4)
Visit this german forum
get the file A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip
flash it via CWM
DONE!
Just tested and it's working.
Credits go to those who deserve it.
I deleted CWM and a mate let it where it was and both A700 are running fine [*] (see below!)
... now waiting for root
----------------------------
[*] New info:
My friend, who kept CWM, unlocked the bootloader again after the update and now has a bootloop. So my advice is to kill CWM after the update.
I don't get into recovery too (with locked bootloader) it says "recovery image verified failed". But system starts normally afterwards.
------------------
More info:
I had CWM on the tab too, because i misunderstood the question:
When asked
Code:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
say NO! to kill CWM.
------------------
Still more info to come:
(4.10.2012)
The bootloop was fixed by flashing a propriate recovery after beeing able to enter fastboot using the right key combination.
andiby left us a JB stock recovery: recovery.img and he build a CWM 6.0.1.4 with JB Kernel: recovery-a700-6014JB.img which runs fine for me.
Use the CWM with JB Kernel only to flash files and not to WIPE, FORMAT or RESTORE a backup, because there were issues with a different JB based CWM and I can't guarantee this one to work, because I have not tested it.

I'm on FR Firmware, can you tell me how should I proceed?

If you want to keep the FR firmware you will have to wait for an appropriate update file.
If you want to switch to Germen I think it should work with this method, because the zip file contains everything from bootloader to system files.

Do you think I can here: https://app.dumptruck.goldenfrog.com/p/GOKKb2PavJ download an install then install Acer_A700_AV043.RV07RC03_AV043.RV07RC06_EMEA_DE thereafter this here JB?

I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
I think you only need the file from my post, because there is everything in it fpr JB afaik, but I can give no guarantee, because I only used it to update my German version.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my request.

DЯΦ[email protected]П said:
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my wish.
Click to expand...
Click to collapse
Yes but i can from FR Firmware to DE and install first update (5MB) and this is 1.053 => finally JB or i think wrong?
PS: Nope. These are my projects

update or flash total
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?

elunico32 said:
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
Click to expand...
Click to collapse
It's an update. Everything is on the tab as before.
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.

Thank
Thank you. I will flash now.

DЯΦ[email protected]П said:
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Click to expand...
Click to collapse
You don't understand me what i mean. I will flash the DE Firmware afterthat 1.053 und then the JB!
Are you from germany?

DakiX said:
You don't understand me what i mean.
Click to expand...
Click to collapse
Maybe ...
I will flash the DE Firmware afterthat 1.053 und then the JB!
Click to expand...
Click to collapse
I just don't get why you want to flash anything else before the "A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip" because it is a FULL ROM and should be flashable over ICS 1.023, ICS 1.027, ICS 1.053 and ICS 1.055 to get JB 1.028.
Are you from germany?
Click to expand...
Click to collapse
My flag says: yes

You have a PM

Works great ! Thanks !
But for me, recovery 6.0.1.4 is KO after the update. I need to use the one with "the brick bug". Not good at all
I will wait for Pawitp before using it...

ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?

DakiX said:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
Click to expand...
Click to collapse
I disabled it, then CWM is away and the Tab as stock as possible.
A friend kept CWM and now has some issues...

HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist

DakiX said:
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
Click to expand...
Click to collapse
Can you get into recovery mode using "adb reboot recovery"?

Nope.. failed but its understandable because CWM must be made for 4.1.1

DakiX said:
Nope.. failed but its understandable because CWM must be made for 4.1.1
Click to expand...
Click to collapse
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?

DЯΦ[email protected]П said:
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
Click to expand...
Click to collapse
Yes i disable it. I can in stock recovery but CWM is gone^^ that i mean :highfive:

[Q] [help] Sungsonic v4 flashing errors

Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:

ZeeOwns said:
Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:
Click to expand...
Click to collapse
I suggest u to change your custom kernel to blackhawk next kernel and don't forget to flash bloob next ...

now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help

ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Format your internal memory via PC.. Go to recovery wipe data, cache n delvk.. Go to download mode and Flash stock 4.1.2 of ur region.. Root ur tab.. Install latest Philz touch recovery.. Then install adi's sshdv4..follow all instructions.. DONT INSTALL ANY CUSTOM RECOVERY AT THE TIME OF INSTALATION.. Good luck..
¤Help = Thanked ©
Sent from Heaven

solved?
ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish

tetakpatak said:
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish
Click to expand...
Click to collapse
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..

ZeeOwns said:
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..
Click to expand...
Click to collapse
Mate, I'm bit short ov experience with the Tab as it didn't make me yet so many problems like my phone did. If you can't revive it, just send it to Samsung service.
It isn't at all especially increddible idea but it won't cost too much and should definitely help.....

Directly booting to recovery

I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful

You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​

j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!

Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps ​

Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.

dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery ​

Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.

Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig

Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca

cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops​

Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops​
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!

Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
​

thanks
thanks for help

Problem with archidroid in samsung galaxy s iii

Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!

aggokeh said:
Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!
Click to expand...
Click to collapse
did you do a full flash? i would try flashing the rom again.

Trozzul said:
did you do a full flash? i would try flashing the rom again.
Click to expand...
Click to collapse
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.

try flashing custom kernel or stock kernel for ur fon...hope this helps...

aggokeh said:
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.
Click to expand...
Click to collapse
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?

Trozzul said:
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?
Click to expand...
Click to collapse
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault

aggokeh said:
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault
Click to expand...
Click to collapse
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.

Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
the CWM version of this particular recovery is 6.0.3.1.. Is this a problem? and if it's recovery's problem what can i do about it? if i flash a stock rom the recovery will not be erased.

.
Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
and this particular recovery is recommended in the instruction of the ROM

aggokeh said:
and this particular recovery is recommended in the instruction of the ROM
Click to expand...
Click to collapse
hmmm well i dont know what to say to that but thats what i have heard with kit kat roms, i have looked on CWMs website and almost all of the galaxys s3s (discluding the s3 mini and international i think) have 6.0.4.X so i would try the specific one for you on Rom manager when you get a rom Working.

I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps

Razor0 said:
I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps
Click to expand...
Click to collapse
can he not just Flash a CWM.img in his recovery? or use rom manager to flash over it?

[Q] Help Me Please...My device is dead

So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

TheAndroidNinja said:
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc

Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk

Frankenscript said:
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help

TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
Click to expand...
Click to collapse
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.

tokenpoke said:
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx

TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
Click to expand...
Click to collapse
Read my last post. Use a different ROM then. There are plenty to choose from.

To be clear what you need to do is use the CWM you have to install A DIFFERENT recovery, one more compatible with a lot of the current custom ROMs. I have used TWRP so for example:
1. Boot to CWM with TWRP package on your microSD
2. Flash TWRP
3. Reboot into recovery... CWM will be gone and you will have TWRP instead
4. In Twrp Wipe caches and format system
5. Still In Twrp, Flash ROM of your choice from ROM downloaded onto your microsd
6. Reboot system and give it time.
Let us know how it goes!

Thank you everyone
Thank You Thanx a lot for helping me guys
I downloaded TWRP n then downloaded the latest version of OMNI Rom and it worked
Thnak u soo much guys
CWM n Cyanagonemod has a lot of bugs and is really ****

CSP III said:
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
Click to expand...
Click to collapse
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please

Glad you got your system to boot omnirom! You may need to re root the device... Others here can help you get that done, as I'm no expert.

TheAndroidNinja said:
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well

Thanx
CSP III said:
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Click to expand...
Click to collapse
Just flashed Supersu and it worked thanx a lot guys