Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!
aggokeh said:
Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!
Click to expand...
Click to collapse
did you do a full flash? i would try flashing the rom again.
Trozzul said:
did you do a full flash? i would try flashing the rom again.
Click to expand...
Click to collapse
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.
try flashing custom kernel or stock kernel for ur fon...hope this helps...
aggokeh said:
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.
Click to expand...
Click to collapse
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?
Trozzul said:
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?
Click to expand...
Click to collapse
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault
aggokeh said:
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault
Click to expand...
Click to collapse
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
the CWM version of this particular recovery is 6.0.3.1.. Is this a problem? and if it's recovery's problem what can i do about it? if i flash a stock rom the recovery will not be erased.
.
Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
and this particular recovery is recommended in the instruction of the ROM
aggokeh said:
and this particular recovery is recommended in the instruction of the ROM
Click to expand...
Click to collapse
hmmm well i dont know what to say to that but thats what i have heard with kit kat roms, i have looked on CWMs website and almost all of the galaxys s3s (discluding the s3 mini and international i think) have 6.0.4.X so i would try the specific one for you on Rom manager when you get a rom Working.
I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps
Razor0 said:
I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps
Click to expand...
Click to collapse
can he not just Flash a CWM.img in his recovery? or use rom manager to flash over it?
Related
i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks
DutchGlory said:
i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks
Click to expand...
Click to collapse
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............
RE: Repair Splash screen GT-N8000
kkretch said:
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............
Click to expand...
Click to collapse
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...
The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .
JJEgan said:
The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .
Click to expand...
Click to collapse
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...
DutchGlory said:
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...
Click to expand...
Click to collapse
If a stock rom has no kernel in your view i suggest you read the faqs and guides before flashing anything ever again .
Kernel - This is always supplied with a ROM. It is the beating heart of Android. The ROM cannot function without the kernel. Since all ROMs include a kernel, if you're using a custom Kernel then flash a ROM, you will need to reflash the kernel again.
DutchGlory said:
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...
Click to expand...
Click to collapse
Can you please tell us exactly how you flashed the stock ROM
kkretch said:
Can you please tell us exactly how you flashed the stock ROM
Click to expand...
Click to collapse
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....
DutchGlory said:
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....
Click to expand...
Click to collapse
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.
kkretch said:
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.
Click to expand...
Click to collapse
i never had a problem with 3.0.7 i even tried "mobile ODIN"
DutchGlory said:
i never had a problem with 3.0.7 i even tried "mobile ODIN"
Click to expand...
Click to collapse
What actually happens when you say the spash screen is messed up?
Does the tablet actually start? Have you tried flashing another custom touch wiz based firmware like Revolution HD or even Omni rom?
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
TheAndroidNinja said:
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Frankenscript said:
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
Click to expand...
Click to collapse
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
tokenpoke said:
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
Click to expand...
Click to collapse
Read my last post. Use a different ROM then. There are plenty to choose from.
To be clear what you need to do is use the CWM you have to install A DIFFERENT recovery, one more compatible with a lot of the current custom ROMs. I have used TWRP so for example:
1. Boot to CWM with TWRP package on your microSD
2. Flash TWRP
3. Reboot into recovery... CWM will be gone and you will have TWRP instead
4. In Twrp Wipe caches and format system
5. Still In Twrp, Flash ROM of your choice from ROM downloaded onto your microsd
6. Reboot system and give it time.
Let us know how it goes!
Thank you everyone
Thank You Thanx a lot for helping me guys
I downloaded TWRP n then downloaded the latest version of OMNI Rom and it worked
Thnak u soo much guys
CWM n Cyanagonemod has a lot of bugs and is really ****
CSP III said:
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
Click to expand...
Click to collapse
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Glad you got your system to boot omnirom! You may need to re root the device... Others here can help you get that done, as I'm no expert.
TheAndroidNinja said:
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Thanx
CSP III said:
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Click to expand...
Click to collapse
Just flashed Supersu and it worked thanx a lot guys
Let's get straight to the topic,
I have an Android Device runnning on Android 4.2.1 named "Samsung Galaxy Fame GT-S6810" which is ROOTED. and now i want to know how to install a CUSTOM ROM like CynogenMod in this device. Help me please.
shifar.shifz said:
Let's get straight to the topic,
I have an Android Device runnning on Android 4.2.1 named "Samsung Galaxy Fame GT-S6810" which is ROOTED. and now i want to know how to install a CUSTOM ROM like CynogenMod in this device. Help me please.
Click to expand...
Click to collapse
To flash custom ROMs,first you have to install cwm recovery in ur device..
For Cwm check this post.....
http://forum.xda-developers.com/showthread.php?t=2534805
After installation of cwm recovery, you can flash any custom ROM.
Just press thanks.
[email protected] # said:
To flash custom ROMs,first you have to install cwm recovery in ur device..
For Cwm check this post.....
http://forum.xda-developers.com/showthread.php?t=2534805
After installation of cwm recovery, you can flash any custom ROM.
Just press thanks.
Click to expand...
Click to collapse
I've already tried and my phone stuckd at the boot screen. i think the problem was with the ROM,
which is the suitable ROM for my phone ?
shifar.shifz said:
I've already tried and my phone stuckd at the boot screen. i think the problem was with the ROM,
which is the suitable ROM for my phone ?
Click to expand...
Click to collapse
For custom roms check this forum..
http://forum.xda-developers.com/galaxy-fame/orig-development
i have N8000 stuck on First Screen (Samsung Note 10.1)
i tried to flash 4.1.2 FULL (4 files & pit)
4.4.2
stock recovery
twrp
CWM
all successful but still stuck on Samsung Note 10.1 screen
& i cant enter to recovery
any idea???
There are two ways to fix this problem:
1. You can flash stock firmware via Odin.
2. Flash PhilZ Kernel via Odin and then flash custom ROM from it.
DroidTwe4kz said:
There are two ways to fix this problem:
1. You can flash stock firmware via Odin.
2. Flash PhilZ Kernel via Odin and then flash custom ROM from it.
Click to expand...
Click to collapse
i already flashed alot of stock firmware via odin ... all of them flashed 100% but still have the same problem
justrelax said:
i already flashed alot of stock firmware via odin ... all of them flashed 100% but still have the same problem
Click to expand...
Click to collapse
Try second method then.
DroidTwe4kz said:
Try second method then.
Click to expand...
Click to collapse
do u mean this file (philz_touch_6.00.8-n8000.tar.md5) ???
cuz i cant find kernel
justrelax said:
do u mean this file (philz_touch_6.00.8-n8000.tar.md5) ???
cuz i cant find kernel
Click to expand...
Click to collapse
Yes try that one
DroidTwe4kz said:
Yes try that one
Click to expand...
Click to collapse
same problem ... flashed Successful but still no recovery & stuck on Samsung Note 10.1 Screen
justrelax said:
same problem ... flashed Successful but still no recovery & stuck on Samsung Note 10.1 Screen
Click to expand...
Click to collapse
Weird
i am having the exact same problem except mine makes it to the splash screen. a fix would be awesome.