I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!
Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery
Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig
Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops
Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
thanks
thanks for help
Related
I have rooted my xolo q1000 and need help with cwm q1000.
Any one who can suggest how can i go about it.
alok_101 said:
I have rooted my xolo q1000 and need help with cwm q1000.
Any one who can suggest how can i go about it.
Click to expand...
Click to collapse
HY, if your question is how to flash recovery,than is pretty simple.First go to playstore,then find Rom manager,from there you will download CWM.Then reboot into stockk recovery(the one your phone allready has)/choose reinstall package (do it two times),and then reboot into recovery.IMPORTANT, do not erase the CWM file,because every time you flash recovery ,it needs the zip file. PLEASE PRESS THANKS IF I HELPED YOU!!!!
johnyvlad said:
HY, if your question is how to flash recovery,than is pretty simple.First go to playstore,then find Rom manager,from there you will download CWM.Then reboot into stockk recovery(the one your phone allready has)/choose reinstall package (do it two times),and then reboot into recovery.IMPORTANT, do not erase the CWM file,because every time you flash recovery ,it needs the zip file. PLEASE PRESS THANKS IF I HELPED YOU!!!!
Click to expand...
Click to collapse
With this he could brick his device...If the phone doesn't have the recovery available or if it has a locked bootloader he can't do this. Please don't spread disinformation as it could harm other people's devices. And to the OP if you could get a stock recovery.img and if the bootloader is unlocked you could use the cwm builder to get the recovery and then fastboot to flash it.
nerotNS said:
With this he could brick his device...If the phone doesn't have the recovery available or if it has a locked bootloader he can't do this. Please don't spread disinformation as it could harm other people's devices. And to the OP if you could get a stock recovery.img and if the bootloader is unlocked you could use the cwm builder to get the recovery and then fastboot to flash it.
Click to expand...
Click to collapse
Scuse me for trying to help .I just told him what i would do,if i had this problem.Now,he needs to search for this,on the official CWM website.It is not my fault if he destroys the world following my advice,so please if you dont like my quotes stay away and dont say to other people that i "spread disinformation",when i am just tryingto help!.......RESPECT!......
johnyvlad said:
Scuse me for trying to help .I just told him what i would do,if i had this problem.Now,he needs to search for this,on the official CWM website.It is not my fault if he destroys the world following my advice,so please if you dont like my quotes stay away and dont say to other people that i "spread disinformation",when i am just tryingto help!.......RESPECT!......
Click to expand...
Click to collapse
You can't just flash any recovery on any device, doing so could PERMANENTLY DAMAGE it. I've been doing stuff like this for quite some time and I know stuff like this. And yes, he has to search about it. It will take more time but it will take a lot more if he destroys his device. And yes it IS YOUR FAULT if you give him completely wrong instructions and he destroys his phone by following them. So if you are unsure about something or you don't know something then don't post it, since it can only make things bad not help.
Ported CWM to my Q1000,below is the link you can download thefile, there is a procedure to port the CWM in pdf file.
https://www.box.com/s/nob1riy77trl6v97tcy8
@starwire
starwire said:
Ported CWM to my Q1000,below is the link you can download thefile, there is a procedure to port the CWM in pdf file.
https://www.box.com/s/nob1riy77trl6v97tcy8
Click to expand...
Click to collapse
file has been removed..do reupload it..thnx in advance!!
here is the link
https://www.box.com/s/ymebwi7p7s6aegy0cunx
some issues...need help
starwire said:
here is the link
https://www.box.com/s/ymebwi7p7s6aegy0cunx
Click to expand...
Click to collapse
first of all thanks for the link...but do clarify one thing:
I have already installed drivers for my phone through pda net while rooting my phone..do i need to uninstall the drivers of the phone & again install it?
It will be greatly helpful if you mention the exact steps you have followed in your own writing rather than the pdf which you have given as it is not very clear.(no offense)
Your help regarding this will be much appreciated..ty!
If you already rooted your phone, install mobile uncle App from play.
Place the recovery in the root of SD card.
open mobile uncle and search for recovery update.
this app will install the recovery.
hope this helps..
starwire said:
If you already rooted your phone, install mobile uncle App from play.
Place the recovery in the root of SD card.
open mobile uncle and search for recovery update.
this app will install the recovery.
hope this helps..
Click to expand...
Click to collapse
the app did not install the recovery i had tried it
the stock cwm has also removed
blade_boy said:
the app did not install the recovery i had tried it
the stock cwm has also removed
Click to expand...
Click to collapse
You have to flash recovery using spflash tools
I tried many times with other methods but it always fails
flashing will void your warranty though, but you can reflash stock rom and act dumb at the service centre and they will fix your phone for free (done this twice)
Miui, lewa os, stock modified 4.2.1(by m_jani) are the only working non crashing roms I know of, let me know if you need their links
how do i...
but how do i have to boot xolo q1000 opus in org/ cwm recovery??
not working
starwire said:
If you already rooted your phone, install mobile uncle App from play.
Place the recovery in the root of SD card.
open mobile uncle and search for recovery update.
this app will install the recovery.
hope this helps..
Click to expand...
Click to collapse
Not working on my device
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
TheAndroidNinja said:
So my Samsung Tab 2 is rooted and i tried downloading Nightlies and after downloading i went into CWM and
1.factory reset
2.wipe dalvik
3.then went on to flash the latest Nightlies
and then it shows error and got dead
now i cant do anything the tablet is dead and doesnt start also
only i can goto CWM mode but that doesnt help
Help me guys am stuck for a long time please help:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Frankenscript said:
If you can get into CWM can't you flash a different recovery, maybe TWRP, then flash a good ROM? I'm a fan of the OMNIROM Kit Kat 4.4.2, but there's lots to choose from.
I had trouble installing ROMs from CWM, but all that resolved with TWRP. I used 2.7.0.1 of TWRP, by the way.
Good luck, and report back.
Marc
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
Click to expand...
Click to collapse
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
tokenpoke said:
Update to latest twrp (I prefer philz advanced recovery, myself) and try flashing again.
Oh, and if possible use a different ROM file as your download may have been corrupted.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
TheAndroidNinja said:
Really thanx for replying and taking time in my problem
but I dont have TWRP installed
My tab2 is rooted and CWM is installed nothing else
https://www.youtube.com/watch?v=o3DBVWamJgk--i used this method to rrot my device
Please reply it would bee really helpful for me
Please Thanx for taking time,big help
and i downloade 2-3 downloads its saying the same
please try to find me a soulution
Thanx
Click to expand...
Click to collapse
Read my last post. Use a different ROM then. There are plenty to choose from.
To be clear what you need to do is use the CWM you have to install A DIFFERENT recovery, one more compatible with a lot of the current custom ROMs. I have used TWRP so for example:
1. Boot to CWM with TWRP package on your microSD
2. Flash TWRP
3. Reboot into recovery... CWM will be gone and you will have TWRP instead
4. In Twrp Wipe caches and format system
5. Still In Twrp, Flash ROM of your choice from ROM downloaded onto your microsd
6. Reboot system and give it time.
Let us know how it goes!
Thank you everyone
Thank You Thanx a lot for helping me guys
I downloaded TWRP n then downloaded the latest version of OMNI Rom and it worked
Thnak u soo much guys
CWM n Cyanagonemod has a lot of bugs and is really ****
CSP III said:
Just download latest TWRP from Android Andi here http://forum.xda-developers.com/showpost.php?p=47970089 flash it thru your CWM, reboot into your new recovery, wipe system and flash a different ROM. Make sure you re-download whatever ROM you are going to use because as previously stated you may have gotten a bad download.
Click to expand...
Click to collapse
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Glad you got your system to boot omnirom! You may need to re root the device... Others here can help you get that done, as I'm no expert.
TheAndroidNinja said:
Hey after i installed Omnirom i think i lost my Root Access
cz Xposed doesnt start anymore and and not any other also
help me please
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Thanx
CSP III said:
Go here http://forum.xda-developers.com/showthread.php?t=2535083and use the Philz recovery link for your device. Once finished you can reflash your existing TWRP zip you used earlier to regain TWRP recovery if thats what you want. Or you can just leave as is and have Philz recovery as that is a very good one as well. Your choice.
You could also use the SuperSu link from here http://download.chainfire.eu/supersu and just flash that. I believe that will work just the same. I havent, but have heard it works as well
Click to expand...
Click to collapse
Just flashed Supersu and it worked thanx a lot guys
HI I NEED YOUR HELP PLEASE : I HAVE ASUS PADFONE 2 suddenly WHEN I WAS SEARCHING ON GOOGLE ITS SHOW ME ( unfortunately google app has stopped ) AND STOCK THERE SO I DID RESET AFTER THAT THE PHONE ITS STOCK ON BOOTING UP ASUS LOGO AND AFTER 15 MINT ITS PASS THE BOOT LOGO AND ITS SHOW ME ON THE TOP ( ENCRYPTION UNSUCCESSFUL ) AND ON THE BOTTOM ( RESET PHONE ) BUT WHEN I HIT ON RESET PHONE IT DOES NOT DOING ANYTHING THE PHONE ITS ( UNROOTED ) AND IT WAS RUNNING ANDROID JELLY JEAN ( 4.1) AND I CAN GET INTO STOCK RECOVERY AND I DID WIPE DATA/ FACTORY RESET AND WIPE CACHE PARTITION BUT STILL STOCK ON BOOT LOGO AND NOT BOOTING NORMALLY AFTER I USED ( ADB BOOT LOADER ) AND TRIED TO FLASH A NEW FIRMWARE BY USING ( CWM RECOVERY ) I DIDNT FLASH THE CWM RECOVERY JUST USED THE IMG RECOVERY TO FLASH THE FIRMWARE ( INSTALL ZIP FROM SIDELOAD ) AND I SENT THE FIRMWARE TO MY PHONE BUT THE CWM RECOVERY COULDN'T FLASH IT ( UNSUCCESSFUL ) BECAUSE CWM RECOVERY ITS GAVE ME EVERY TIME ( E: CANT MOUNT ) ANYTHING I DID WITH CWM RECOVERY IT DOES NOT WORK SO I NEED YOUR HELP GUYS PLEASE ANYBODY CAN HELP ME WITH THAT I WILL BE APPRECIATED AND THANK YOU PLEASE HELP NOTE : I DONT KNOW WHAT IS THE BUILD NUMBER ON MY PHONE BUT I BOUGHT IT FROM TAIWAN .... HEY GUYS CHECK THE PICS PLEASE WHICH I POSTED AND THANKS
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Thank you so much for your replies
roselanguste said:
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Click to expand...
Click to collapse
YES I WAS USED CWM:6.0.2.9 I TRIED OVER 20 TIMES WITHOUT ANY SUCCEED (UNSUCCESSFUL) AS SHOWN IN THE PICTURES WHICH I POSTED ALREADY I TRIED ALL THESE ROMS : TW_A68-11.8.4.12-0-ota-user.zip ,TW_A68-11.8.4.6-0-ota-user.zip,WW_A68-11.8.4.23-0-ota-user.zip,CHT_A68-11.8.3.3-0-ota-user.zip,CN_A68-10.4.17.7-0-ota-user.zip,HK_A68-10.4.17.7-0-ota-user.zip,TW_A68-11.8.4.23-0-ota-user.zip ,,, I TRIED ALL THESE ROMS BECAUSE I DONT KNOW WHAT IT WAS MY ( BUILD NUMBER ) I CANT REMEMBER I JUST KNOW IT WAS JELLY BEAN 4.1 AND MY PADFONE 2 MODEL A68 IT WAS NOT ROOTED IT HAS STUCK FIRMWARE AND HAS ( LOCKED BOOTLOADER ) AND I TRIED TOO : adb push firmware.zip /data/media for example :adb push TW_A68-11.8.4.23-0-ota-user.zip /data/media and i pushed already to my external storage because there is no memory card on this phone (sdcard) using the stock recovery and when i tried to install the update from the /data/media it shows : install update and after 15 mint it gave me installation aborted and i wanna tell you something else the CWM RECOVERY WHEN I USED IT I DIDNT FLASH IT I JUST BOOT LIKE TESTED :fastboot boot recover.img because i dont know if i can flash it or not because my phone its ( not rooted ) please i need your help and thank you so much and if you need more information just let me know because maybe i forgot something just let me know and thanks
false national rom!
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
roselanguste said:
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
Click to expand...
Click to collapse
i dont know what is the fals natinoal rom ? and i bought my phone from taiwan ? and i dont know what is my build version i cant remember ? and how i can unlock the bootloader and my phone its not booting up normally ? can you tell me what i have to do please step by step and thank you so much
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
roselanguste said:
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
Click to expand...
Click to collapse
I TRIED ALL THE TW : ROMS WHICH I SENT IT TO YOU ALREADY ABOVE AND I DOWNLOAD THESE ROMS FROM ASUS WEBSITE FIRMWARES ,, AND I SENT THE ROMS USING THE SIDELOAD TO MY PHONE AND IM NOT FLASHING THE CWM ON MY PHONE BECUSE MY PHONE ITS NOT ROOTED AND THE BOOTLOADER ITS LOCKED I JUST LET CWM TO BOOT ON MY PHONE NOT FLASH IT AND WHEN I TRIED TO INSTALL THE UPDATE USING CWM ITS GAVE ME ( INSTALLATION ABORTED ) STATUS 7 ERROR ,,,, check the pics please and thanks
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
roselanguste said:
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
Click to expand...
Click to collapse
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
wasim74 said:
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
Click to expand...
Click to collapse
yes i tried fastboot and sideload i have no problem with that i can send the roms to my phone but the problem my phone cant flash it ?
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
roselanguste said:
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
Click to expand...
Click to collapse
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
wasim74 said:
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
Click to expand...
Click to collapse
oh ,, just to let you know when i used the cwm 6.0.2.9 i cant do wipe -factory reset or wipe cashe its gave me e: cnt mount but on stock recovery i can do wipe cashe and factory reset but it take too long to do that
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
roselanguste said:
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
Click to expand...
Click to collapse
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
The Root is here not so important. In most cases a ROM-Flash Unrooting the device! Every Time when i Flash a ROM, the device is after the Flash unrooted, and i must it Root again! Root is important for a Running System! And it gives a way to Root the Device over ADB/Fastboot, but i dont know how. But i have never Need a Root for ROM-Flash!
wasim74 said:
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
Click to expand...
Click to collapse
sorry my friend : i mean my padfone 2 its not have root its ( unrooted ) so can i flash the custom recovery cwm or twrp on my phone and flash custom roms without having root on my padfone 2 ,,,,,, can i do that without root or i cant ? and thanks
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
roselanguste said:
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
Click to expand...
Click to collapse
hi my friend : i have problem with flashing the recovery { fastboot flash recovery recovery.img } i dont know why and i tried to just boot the recovery img for test : fastboot boot boot recovery.img i tried it with twrp and its show me just the picture TEAM WIN BUT ITS NOT FUNCTIONAL CHECK THE PICS PLEASE AND LET ME KNOW WHAT IS THE PROBLEM AND THANKS
On the pics i see, that recovery-flash was failure! In your CMD-pic, adb gives you a writing-failure! That can happen, when you try it ones! Try it again, and also with cwm! What for twrp version have you try? By right flashing, cmd gives you a sending recovery ok, and writing recovery ok! You have sending ok, but writing a failure!?
And what for adb/fastboot binarys use you?
P.s.: I have a important question, as you tryed to flash Asus Firmwares, have you unzip the Firmware before flashing? Or just Download and Flash how it is!
Hi there!
I've been trying to flash any custom recovery to my p5100. It was never flashed before. What I did:
-tried to follow http://forum.xda-developers.com/showthread.php?t=1657056
-tried to follow http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
I was doing those guides step-by step, didn't forget a thing (I'm sure)-
But everytime I flash something via PDA to the device in ODIN, and I try to go to the recovery, I get the stock recovery (3e) where I cannot apply any *.zip files as updates.
My goal is to install some android 5.0.x to the device. I know the risks.
Thank you in advance for help.
Duobix said:
Hi there!
I've been trying to flash any custom recovery to my p5100. It was never flashed before. What I did:
-tried to follow http://forum.xda-developers.com/showthread.php?t=1657056
-tried to follow http://forum.xda-developers.com/showpost.php?p=50174804&postcount=3
I was doing those guides step-by step, didn't forget a thing (I'm sure)-
But everytime I flash something via PDA to the device in ODIN, and I try to go to the recovery, I get the stock recovery (3e) where I cannot apply any *.zip files as updates.
My goal is to install some android 5.0.x to the device. I know the risks.
Thank you in advance for help.
Click to expand...
Click to collapse
Hi,
1. Root your device using CF - Auto Root for p5100 basically download it and flash it using ODIN
2. Install any custom recovery you want this topic Custom Recovery. I use TWRP but feel free to use anything you want.
3. Go to the GT-P5100 Development and choose any Lolipop Rom that you like and enjoy it
Duobix said:
...But everytime I flash something via PDA to the device in ODIN, and I try to go to the recovery, I get the stock recovery (3e) where I cannot apply any *.zip files as updates...
Click to expand...
Click to collapse
Unmark Auto-reboot option and manually reboot into recovery.
Stock ROM overwrites custom recovery by stock one.
Elbadri1 said:
Hi,
1. Root your device using CF - Auto Root for p5100 basically download it and flash it using ODIN
2. Install any custom recovery you want this topic Custom Recovery. I use TWRP but feel free to use anything you want.
3. Go to the GT-P5100 Development and choose any Lolipop Rom that you like and enjoy it
Click to expand...
Click to collapse
The above-mentioned solution worked like a charm for me. Thank you!
I followed every step Elbadri mentioned-it works.
seagman said:
Unmark Auto-reboot option and manually reboot into recovery.
Stock ROM overwrites custom recovery by stock one.
Click to expand...
Click to collapse
Thanks, I had no idea such a software mechanism is in existence.
Duobix said:
The above-mentioned solution worked like a charm for me. Thank you!
I followed every step Elbadri mentioned-it works.
Click to expand...
Click to collapse
Glad to hear that.
Duobix said:
The above-mentioned solution worked like a charm for me. Thank you!
I followed every step Elbadri mentioned-it works.
Thanks, I had no idea such a software mechanism is in existence.
Click to expand...
Click to collapse
remember to add "[SOLVED]" to the beginning of the thread title.