Hi!
Just found a way to update to JB from the 1.053 version (Acer_AV043_A700_RV22RC03_EMEA_DE) on wich every other update failed for me. But runs with the other versions, too.
Unlock Bootloader
Install CWM (6.0.1.4)
Visit this german forum
get the file A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip
flash it via CWM
DONE!
Just tested and it's working.
Credits go to those who deserve it.
I deleted CWM and a mate let it where it was and both A700 are running fine [*] (see below!)
... now waiting for root
----------------------------
[*] New info:
My friend, who kept CWM, unlocked the bootloader again after the update and now has a bootloop. So my advice is to kill CWM after the update.
I don't get into recovery too (with locked bootloader) it says "recovery image verified failed". But system starts normally afterwards.
------------------
More info:
I had CWM on the tab too, because i misunderstood the question:
When asked
Code:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
say NO! to kill CWM.
------------------
Still more info to come:
(4.10.2012)
The bootloop was fixed by flashing a propriate recovery after beeing able to enter fastboot using the right key combination.
andiby left us a JB stock recovery: recovery.img and he build a CWM 6.0.1.4 with JB Kernel: recovery-a700-6014JB.img which runs fine for me.
Use the CWM with JB Kernel only to flash files and not to WIPE, FORMAT or RESTORE a backup, because there were issues with a different JB based CWM and I can't guarantee this one to work, because I have not tested it.
I'm on FR Firmware, can you tell me how should I proceed?
If you want to keep the FR firmware you will have to wait for an appropriate update file.
If you want to switch to Germen I think it should work with this method, because the zip file contains everything from bootloader to system files.
Do you think I can here: https://app.dumptruck.goldenfrog.com/p/GOKKb2PavJ download an install then install Acer_A700_AV043.RV07RC03_AV043.RV07RC06_EMEA_DE thereafter this here JB?
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
I think you only need the file from my post, because there is everything in it fpr JB afaik, but I can give no guarantee, because I only used it to update my German version.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my request.
DЯΦ[email protected]П said:
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my wish.
Click to expand...
Click to collapse
Yes but i can from FR Firmware to DE and install first update (5MB) and this is 1.053 => finally JB or i think wrong?
PS: Nope. These are my projects
update or flash total
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
elunico32 said:
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
Click to expand...
Click to collapse
It's an update. Everything is on the tab as before.
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Thank
Thank you. I will flash now.
DЯΦ[email protected]П said:
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Click to expand...
Click to collapse
You don't understand me what i mean. I will flash the DE Firmware afterthat 1.053 und then the JB!
Are you from germany?
DakiX said:
You don't understand me what i mean.
Click to expand...
Click to collapse
Maybe ...
I will flash the DE Firmware afterthat 1.053 und then the JB!
Click to expand...
Click to collapse
I just don't get why you want to flash anything else before the "A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip" because it is a FULL ROM and should be flashable over ICS 1.023, ICS 1.027, ICS 1.053 and ICS 1.055 to get JB 1.028.
Are you from germany?
Click to expand...
Click to collapse
My flag says: yes
You have a PM
Works great ! Thanks !
But for me, recovery 6.0.1.4 is KO after the update. I need to use the one with "the brick bug". Not good at all
I will wait for Pawitp before using it...
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
DakiX said:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
Click to expand...
Click to collapse
I disabled it, then CWM is away and the Tab as stock as possible.
A friend kept CWM and now has some issues...
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
DakiX said:
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
Click to expand...
Click to collapse
Can you get into recovery mode using "adb reboot recovery"?
Nope.. failed but its understandable because CWM must be made for 4.1.1
DakiX said:
Nope.. failed but its understandable because CWM must be made for 4.1.1
Click to expand...
Click to collapse
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
DЯΦ[email protected]П said:
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
Click to expand...
Click to collapse
Yes i disable it. I can in stock recovery but CWM is gone^^ that i mean :highfive:
Related
NOTICE
You must have 4.1.2 stock firmware :fingers-crossed: (This is not rom)
and
Download the update zip from google server http://android.clients.google.com/packages/data/ota/google_nakasi/094f6629314a.signed-nakasi-JOP40C-from-JZO54K.094f6629.zip
Mirror 1 http://download.tbridge.kr/094f6629314a.signed-nakasi-JOP40C-from-JZO54K.094f6629.zip
Mirror 2 http://www.mediafire.com/?cmz138n95r95cez
Mirror 3 http://d-h.st/GEr
If you have a custom recovery, you can just copy it to the device, reboot to recovery, and flash directly as you would any other zip. You're done.
If you have the stock recovery, carry on.
Do you do a full wipe or dirty flash?
And first
i have this recovery:
http://i.ytimg.com/vi/u62sGk0Ypcg/0.jpg
what i need to do ?
tommy24 said:
Do you do a full wipe or dirty flash?
And first
Click to expand...
Click to collapse
u must install 4.1.2 stock firmware and install ota packages
if you 4.1.2 firmware just install no full wipe
htchoi5609 said:
u must install 4.1.2 stock firmware and install ota packages
if you 4.1.2 firmware just install no full wipe
Click to expand...
Click to collapse
and if i have this recovery:
http://i.ytimg.com/vi/u62sGk0Ypcg/0.jpg
what i need to do ?
ishay_maimon said:
i have this recovery:
http://i.ytimg.com/vi/u62sGk0Ypcg/0.jpg
what i need to do ?
Click to expand...
Click to collapse
i do not know :crying:
but maybe twrp recovery will be fine.
ishay_maimon said:
i have this recovery:
http://i.ytimg.com/vi/u62sGk0Ypcg/0.jpg
what i need to do ?
Click to expand...
Click to collapse
You do nothing special but make sure that you nexus 7 has stock firmware and no modified system file. Flash away with TWRP as usual.
ondoy1943 said:
You do nothing special but make sure that you nexus 7 has stock firmware and no modified system file. Flash away with TWRP as usual.
Click to expand...
Click to collapse
Thx
htchoi5609 said:
Thx
Click to expand...
Click to collapse
double post! I already posted this few minutes ago http://forum.xda-developers.com/showthread.php?t=1989158
It fails when I flash it on twrp, and I'm on a rooted stock rom
Flashed and testing...
Superuser no longer seems to work :s
Edit: Flashed Chainfires CWM superuser file (http://forum.xda-developers.com/showthread.php?t=1741395) . Works perfectly now
njackson-uk said:
Superuser no longer seems to work :s
Click to expand...
Click to collapse
What did you expect you flashed an OTA update. Unless you use something like OTA Root Keeper you are gong to lose root. Just use one of the many ways to root your device. I use Wug Fresh for rooting and installing a custom recovery.
Sent from my Nexus 7
Clean ROM 2.0 - leankernel .4
ishay_maimon said:
i have this recovery:
http://i.ytimg.com/vi/u62sGk0Ypcg/0.jpg
what i need to do ?
Click to expand...
Click to collapse
The install is failed, why ?
Sent from my Galaxy Nexus using XDA Premium HD app
how about rooting this 4.2 ??
I just updated and rooted with the same CWM package I used for 4.1.2 rom.
how to root it
use which super su.zip?
You can root it with the Nexus 7 ToolKit. Tested and working for me.
Or you can root manualy, by pushing rhe CWM recovery to system in Fastboot mode and installing the SU from CWM.
Beware of the Bootloader 4.13 that also made the issue of not recognizing the custom recovery - need to downgrade bootloader to 3.34 first.
In my case the recovery remained unchanged. I didn't had to downgrade anything.
I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!
Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery
Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig
Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops
Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
thanks
thanks for help
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
a lot of users are having this problem and if you want to receive an OTA you have to flash the stock unrooted firmware that will cause lose of data.
this guide will show you how to receive OTA again without losing your stuff
This works on GT-I9500 ONLY! (Lollipop 5.0.1 Recovery)
This also should work on any other model, but you have to replace the recovery with your model!
Steps:
1- Go to SuperSU and scroll down to "Full unroot" then reboot.
2- Download This file to PC and extract it.
3- Go to download mode by pressing the power key + home key + volume down key at the same time, then press volume up.
4- Flash the file via Odin (AP) or (PDA)
go to check the system status, you will find it Official
you can now receive OTA.
Q&A:
What is OTA (Over The Air)? Its an update which you can receive over wifi or mobile data.
What do i get from OTA? Well, if you root your device you wont be able to receive an update again, unless from flashing firmware via Odin.
- Why im still on custom status? Because you modified your system.
- What kind of modifying? Installing busybox, editing or deleting or changing any app or file system.
and some times xposed.
- How do i restore the old app? You can restore them by flashing firmware or by restoring Nandroid backup.
- Then what is the use of your guide? Well my guide helps in first place the rooted not the modded onces.
and always do Nandroid of the original system apps+data
you are still having your apps, data, pics, vids, etc...
you can root again at anytime.
check my thread for rooting if you want
im not responsible for any bricks
thank you...
KillerJM249 said:
thank you...
Click to expand...
Click to collapse
At any time
Bricked.. wat to do?
If i am bricked, will flashing the official rom again solve the problem??
Thanks alot ...
Sent from my GT-I9500 using Tapatalk 2
yagneshlp said:
If i am bricked, will flashing the official rom again solve the problem??
Click to expand...
Click to collapse
What kind of bricked? Soft brick like bootloop?
S_7 said:
Thanks alot ...
Sent from my GT-I9500 using Tapatalk 2
Click to expand...
Click to collapse
Your welcome!
Hi there,
Thanks for the guide, just thinking you may want to say what option in Odin to put the file and what OTA stands for, for the noobs.
Just a thought.
TG09 said:
Hi there,
Thanks for the guide, just thinking you may want to say what option in Odin to put the file and what OTA stands for, for the noobs.
Just a thought.
Click to expand...
Click to collapse
Done
if i flash custom kernel i will still get update with this ?
leap_ahead said:
if i flash custom kernel i will still get update with this ?
Click to expand...
Click to collapse
I didnt test it, if you can do please confirm, and if you cant get an update just flash the stock kernel (boot.img)
If i remove some files on rom i will get update .?
Thanks
didn't work. still shows custom and doesn't check for the update.
leap_ahead said:
If i remove some files on rom i will get update .?
Thanks
Click to expand...
Click to collapse
At some point the update maybe canceled, because the update checks for the apps before the installation, always do a backup of your phone then remove what you want, after you want to update just restore the system folder from the backup
sak500 said:
didn't work. still shows custom and doesn't check for the update.
Click to expand...
Click to collapse
If you can see the stock recovery then check the SuperSU app again and maybe you are having a custom kernel
RubbaBand said:
If you can see the stock recovery then check the SuperSU app again and maybe you are having a custom kernel
Click to expand...
Click to collapse
So i need to unroot it as well ? Anyway flashed via odin original stock russian lollipop rom just to check for any update and the flashed twrp and rooted it back. Just that it takes 10 mins or more to do all this. Thought your small flash file would work .
sak500 said:
So i need to unroot it as well ? Anyway flashed via odin original stock russian lollipop rom just to check for any update and the flashed twrp and rooted it back. Just that it takes 10 mins or more to do all this. Thought your small flash file would work .
Click to expand...
Click to collapse
U try the method with flash only stock recovery and not work?
leap_ahead said:
U try the method with flash only stock recovery and not work?
Click to expand...
Click to collapse
yes flashed stock recovery but still showed custom. I was on original stock russain with root and custom recovery only. No custom kernel or different ROM.
sak500 said:
So i need to unroot it as well ? Anyway flashed via odin original stock russian lollipop rom just to check for any update and the flashed twrp and rooted it back. Just that it takes 10 mins or more to do all this. Thought your small flash file would work .
Click to expand...
Click to collapse
yes you need to full unroot your device as mentioned in the guide then flash the file, lol no my small file its just the stock recovery
Is this available for Gt-i9505 version
Is this available for GT-i9505 version?
HI I NEED YOUR HELP PLEASE : I HAVE ASUS PADFONE 2 suddenly WHEN I WAS SEARCHING ON GOOGLE ITS SHOW ME ( unfortunately google app has stopped ) AND STOCK THERE SO I DID RESET AFTER THAT THE PHONE ITS STOCK ON BOOTING UP ASUS LOGO AND AFTER 15 MINT ITS PASS THE BOOT LOGO AND ITS SHOW ME ON THE TOP ( ENCRYPTION UNSUCCESSFUL ) AND ON THE BOTTOM ( RESET PHONE ) BUT WHEN I HIT ON RESET PHONE IT DOES NOT DOING ANYTHING THE PHONE ITS ( UNROOTED ) AND IT WAS RUNNING ANDROID JELLY JEAN ( 4.1) AND I CAN GET INTO STOCK RECOVERY AND I DID WIPE DATA/ FACTORY RESET AND WIPE CACHE PARTITION BUT STILL STOCK ON BOOT LOGO AND NOT BOOTING NORMALLY AFTER I USED ( ADB BOOT LOADER ) AND TRIED TO FLASH A NEW FIRMWARE BY USING ( CWM RECOVERY ) I DIDNT FLASH THE CWM RECOVERY JUST USED THE IMG RECOVERY TO FLASH THE FIRMWARE ( INSTALL ZIP FROM SIDELOAD ) AND I SENT THE FIRMWARE TO MY PHONE BUT THE CWM RECOVERY COULDN'T FLASH IT ( UNSUCCESSFUL ) BECAUSE CWM RECOVERY ITS GAVE ME EVERY TIME ( E: CANT MOUNT ) ANYTHING I DID WITH CWM RECOVERY IT DOES NOT WORK SO I NEED YOUR HELP GUYS PLEASE ANYBODY CAN HELP ME WITH THAT I WILL BE APPRECIATED AND THANK YOU PLEASE HELP NOTE : I DONT KNOW WHAT IS THE BUILD NUMBER ON MY PHONE BUT I BOUGHT IT FROM TAIWAN .... HEY GUYS CHECK THE PICS PLEASE WHICH I POSTED AND THANKS
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Thank you so much for your replies
roselanguste said:
What for a ROM and CWM Version have you using?
CWM6.0.2.9 goes not for the most ROMs! You must need CWM6.0.4.4 or higher, or TWRP-Recovery for Padfone 2!
Perhabs your Device can reactivatet by a new Firmware-Flash with CWM6.0.4.4 or TWRP!
Click to expand...
Click to collapse
YES I WAS USED CWM:6.0.2.9 I TRIED OVER 20 TIMES WITHOUT ANY SUCCEED (UNSUCCESSFUL) AS SHOWN IN THE PICTURES WHICH I POSTED ALREADY I TRIED ALL THESE ROMS : TW_A68-11.8.4.12-0-ota-user.zip ,TW_A68-11.8.4.6-0-ota-user.zip,WW_A68-11.8.4.23-0-ota-user.zip,CHT_A68-11.8.3.3-0-ota-user.zip,CN_A68-10.4.17.7-0-ota-user.zip,HK_A68-10.4.17.7-0-ota-user.zip,TW_A68-11.8.4.23-0-ota-user.zip ,,, I TRIED ALL THESE ROMS BECAUSE I DONT KNOW WHAT IT WAS MY ( BUILD NUMBER ) I CANT REMEMBER I JUST KNOW IT WAS JELLY BEAN 4.1 AND MY PADFONE 2 MODEL A68 IT WAS NOT ROOTED IT HAS STUCK FIRMWARE AND HAS ( LOCKED BOOTLOADER ) AND I TRIED TOO : adb push firmware.zip /data/media for example :adb push TW_A68-11.8.4.23-0-ota-user.zip /data/media and i pushed already to my external storage because there is no memory card on this phone (sdcard) using the stock recovery and when i tried to install the update from the /data/media it shows : install update and after 15 mint it gave me installation aborted and i wanna tell you something else the CWM RECOVERY WHEN I USED IT I DIDNT FLASH IT I JUST BOOT LIKE TESTED :fastboot boot recover.img because i dont know if i can flash it or not because my phone its ( not rooted ) please i need your help and thank you so much and if you need more information just let me know because maybe i forgot something just let me know and thanks
false national rom!
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
roselanguste said:
I think you have Flash the fals national Rom! TW = Taiwan-ROM, CHT = China-ROM, WW = Worldwide-English, and so on! Thats named SKU Version of the ROM! When your padfone from Europa or USA than you need a WW or WWE ROM! It gives a thread on XDA for flashing other,false,back SKU on Padfones! Search that thread, there a tuturials for Changing or Flash back SKUs! Your device need a Flash back to his original SKU-Version of your ROM!
And for CWM your padfone must be unlocked! But thats simple! On Asus Homepage search your device, and than you can Download a Unlock-APK! Download and install thies apk on your padfone, and start it, than your bootloader is unlocked! And after that, you can install CWM or TWRP on several ways!
Click to expand...
Click to collapse
i dont know what is the fals natinoal rom ? and i bought my phone from taiwan ? and i dont know what is my build version i cant remember ? and how i can unlock the bootloader and my phone its not booting up normally ? can you tell me what i have to do please step by step and thank you so much
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
roselanguste said:
Build-Number is not important!
May be i can help you! Can you start the device in CWM-Mode? Can you go in CWM? In case that you can, load a TW-ROM (TW=Taiwan) via ADB-Sideload over CWM to your device! Than the device should install the original TW-ROM automaticaly!
In case that CWM not Functional, try to turn off the device, wait 30-seconds, than hold the ``+`` (Plus) button on the side of the device, and turn on the device where you hold the ``+`` (Plus) button permanently! Yet should come the ASUS-Logo and in the Top of the Display should stand ``Fastboot-Mode``! Can you please try that, and say me what the device do!?
Click to expand...
Click to collapse
I TRIED ALL THE TW : ROMS WHICH I SENT IT TO YOU ALREADY ABOVE AND I DOWNLOAD THESE ROMS FROM ASUS WEBSITE FIRMWARES ,, AND I SENT THE ROMS USING THE SIDELOAD TO MY PHONE AND IM NOT FLASHING THE CWM ON MY PHONE BECUSE MY PHONE ITS NOT ROOTED AND THE BOOTLOADER ITS LOCKED I JUST LET CWM TO BOOT ON MY PHONE NOT FLASH IT AND WHEN I TRIED TO INSTALL THE UPDATE USING CWM ITS GAVE ME ( INSTALLATION ABORTED ) STATUS 7 ERROR ,,,, check the pics please and thanks
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
roselanguste said:
Ok! I think it is the old CWM6.0.2.9 problem, this version of CWM has problems with flashing ROMs! BUT, there is one ROM on XDA for Padfone2 that must flash with CWM6.0.2.9! It is Tari's Padfone2 Custom ROM+Kernel! It is easy to find on XDA, and this ROM will flashing over Sideload with CWM6.0.2.9! Search on XDA for Tari's Padfone2 ROM, there you can Download the files, and there is also a step by step tuturial, follow that, and try!
And have you tested that Fastboot goes?
Click to expand...
Click to collapse
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
wasim74 said:
yes i used cwm 6.0.29 ,, ok but you said taris padfone 2 rom its custom rom how am gonna flash it and my phone its not rooted and the bootloader on my phone its locked
Click to expand...
Click to collapse
yes i tried fastboot and sideload i have no problem with that i can send the roms to my phone but the problem my phone cant flash it ?
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
roselanguste said:
OK! But i think your Bootloader is Open, than otherwise, you cant go in Fastbootmode or CWM!? Fastbootmode and CWM (Recovery), that is the Bootloader!
You can go in CWM, then you can make the flash-prozedure of all ROMs! (Stock and Custom)!
Try Taris ROM! Go in CWM, make Wipe Data/Factory Reset, make Wipe Cache, and Sideload Taris ROM!
Did that not work, try CWM6.0.4.4 or TWRP-Recovery to Flash Original ASUS-TW-Firmware!
And when you can start CWM with - fastboot boot recovery.img - , than normaly you can also Flash it permanently with - fastboot flash recovery recovery.img - !
Click to expand...
Click to collapse
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
wasim74 said:
but i didnt unlock the bootloader on my phone how come its unlock i dont know ? so you mean i have to flash the cwm on my phone after that send one of the TW-ROMS to my phone and flash it too ,,, ok i will try that but from where i can get the cwm6.0.4.4 for padfone2 let me know please and thank you so much because you are help me with that ?
Click to expand...
Click to collapse
oh ,, just to let you know when i used the cwm 6.0.2.9 i cant do wipe -factory reset or wipe cashe its gave me e: cnt mount but on stock recovery i can do wipe cashe and factory reset but it take too long to do that
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
roselanguste said:
There is a other custom ROM for Padfone2 from Sissidroid! Search on XDA for - Guerilla ROM - it is easy to find, and in the thread to this ROM there is a link for Download CWM6.0.4.4. Because CWM6.0.4.4 is needed to Flash Guerilla-ROM from Sissidroid!
In Google search - TWRP for Padfone2 - then you find a TWRP-Site, from there you can Download TWRP-Recoverys for Padfone2. Take the Version 2.6.3.0 of TWRP, not other. The other Versions dont go! TWRP is a Recovery like CWM, but TWRP has a Touch-Interface, and the funtionality is often better than CWM!
Click to expand...
Click to collapse
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
The Root is here not so important. In most cases a ROM-Flash Unrooting the device! Every Time when i Flash a ROM, the device is after the Flash unrooted, and i must it Root again! Root is important for a Running System! And it gives a way to Root the Device over ADB/Fastboot, but i dont know how. But i have never Need a Root for ROM-Flash!
wasim74 said:
ok am gonna look for cwm6.0.44 and for twrp 2.6.3.0 and flash one of them on my phone not just like how i was did i mean just boot it and after that flash one of the roms which you told me about them already but just to remind you my phone its not rooted is that fine ... let me know and thank you so much my friend
Click to expand...
Click to collapse
sorry my friend : i mean my padfone 2 its not have root its ( unrooted ) so can i flash the custom recovery cwm or twrp on my phone and flash custom roms without having root on my padfone 2 ,,,,,, can i do that without root or i cant ? and thanks
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
roselanguste said:
Yes, you can do that without root! Important for that is only you can go in Fastbootmode and CWM/TWRP!
Click to expand...
Click to collapse
hi my friend : i have problem with flashing the recovery { fastboot flash recovery recovery.img } i dont know why and i tried to just boot the recovery img for test : fastboot boot boot recovery.img i tried it with twrp and its show me just the picture TEAM WIN BUT ITS NOT FUNCTIONAL CHECK THE PICS PLEASE AND LET ME KNOW WHAT IS THE PROBLEM AND THANKS
On the pics i see, that recovery-flash was failure! In your CMD-pic, adb gives you a writing-failure! That can happen, when you try it ones! Try it again, and also with cwm! What for twrp version have you try? By right flashing, cmd gives you a sending recovery ok, and writing recovery ok! You have sending ok, but writing a failure!?
And what for adb/fastboot binarys use you?
P.s.: I have a important question, as you tryed to flash Asus Firmwares, have you unzip the Firmware before flashing? Or just Download and Flash how it is!