hi all
i am using stock rom DDLF2 (one file) downloaded from teashare.com and using BAM universal kernel 15 beta by xda_BAM. I tried to install CM11 but faced bootloop i.e stuck at samsung logo. now i want to install CM11 plz guide me which kernel and recovery should i use?i am really desparate to use this ROM. thanks in advance.
14 views but no reply??
Firat go to latest cwm and then install
King11amit said:
Firat go to latest cwm and then install
Click to expand...
Click to collapse
which cwm is compatible,will u be kind to elaborate the procedure.
pliss to.provide the link sir
and thanks for replying
Search on forum cant provide link ok
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
Which cwm version u r using
Flash cm10.2 then cm11 cwm upgrade is automatic
already tried that
let me clearify my situtation here
i was on CM10.2 and than tried to update to CM11 by directly flashing CM11 zip as directed by dhiru in the OP,i ended up in bootloop so i flashed DDLF2 yet bootloop resulted.I searched the forum and found BAM kernel as the solution and phone booted successfully.
now u want to flash cm11.can i do it directly or Do i need to flash a diffrent kernel or recovery first?
plz help.
Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003
sam_777 said:
Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003
Click to expand...
Click to collapse
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?
and one more noob question
what diffrence does it make if i install stock ROM DDLF2 using one file only or using 5 files(pit,bootloader,modem etc.) as suggested by sgtechwork in this thread.
forum.xda-developers.com/showthread.php?t=2329200
suripape said:
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?
Click to expand...
Click to collapse
You don't need kernel or cwm. Both are included in cm ROM.
Sent from my GT-I9003
Remove battery and place it back (turn off),
put your phone into download mode (vol down-home then power)
odin
place all the stock rom files (pit, ....)
start
and also I suggest you don't go for the CM11 yet, because it has some bugs as I tried it.
There are better stable roms for SL here.
HTH
Related
Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:
ZeeOwns said:
Hi guys, please help me I've downloaded the rom for p3100 and I have
philz recovery. I did the steps according to adi When the setup is finished it says flashed successful and I reboot it, It hangs at
the "samsung galaxy tab 2" screen ive waited for 5 hrs and nothings
happen. My kernel is Agni kernels that adi provided for sungsonic 2
and I did a clean install ive wiped everything. What should I do?
Should I flash jellybean 4.2.2 first? any suggestions? :crying:
Click to expand...
Click to collapse
I suggest u to change your custom kernel to blackhawk next kernel and don't forget to flash bloob next ...
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Format your internal memory via PC.. Go to recovery wipe data, cache n delvk.. Go to download mode and Flash stock 4.1.2 of ur region.. Root ur tab.. Install latest Philz touch recovery.. Then install adi's sshdv4..follow all instructions.. DONT INSTALL ANY CUSTOM RECOVERY AT THE TIME OF INSTALATION.. Good luck..
¤Help = Thanked ©
Sent from Heaven
solved?
ZeeOwns said:
now I tried flashing the kernels first the next kernel then the blob then flashed the sung sonic v4 still no luck then I tried vice versa still nonluck anyway thank u for replying I appreciated your help
Click to expand...
Click to collapse
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish
tetakpatak said:
Hi mate, did you solve it?
Don't worry, as long as you have recovery mode and download mode you have good chances for happy-end
Maybe you're too far from stock now with all your kernels etc, so something is not compatible.
Best you can do IMO is to flash via Odin3_v1.87 any stock ROM for your region (there are many tutorials for using Odin if you never did it) if after unzipping only one single big file appears, choose it under PDA (don't check re-partition), set you Tab into download mode and flash it. If several files are there, each belongs under its section. (in that case if you are not sure how, just quote my post and ask again, I will answer you)
After that you can root the stock ROM, install CWM recovery and flash whatever you wish
Click to expand...
Click to collapse
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..
ZeeOwns said:
Bro, unfortunately I've tried it 3x but no luck... Until now I cn't flash sshdv4 anyways thanks..
Click to expand...
Click to collapse
Mate, I'm bit short ov experience with the Tab as it didn't make me yet so many problems like my phone did. If you can't revive it, just send it to Samsung service.
It isn't at all especially increddible idea but it won't cost too much and should definitely help.....
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
matutecarp99 said:
Hello friends, I am newbie in android something I wanted to install CWM 6.0.4.5 of this tutorial http://forum.xda-developers.com/showthread.php?t=2560928 and everything goes perfectly, but when squeezed keys + volume, power and home the ANDROID SYSTEM RECOVERY 3E shows me instead of CWM 6.0.4.5 and enter CWM have to do to step 4 with odin and remove the battery etc. .. and I can get! but only this time, after I turn it and attempt to re-enter but it appears the android system recovery 3e. Please help, I do not want this whole process to remove the battery to get. Thank you!
Click to expand...
Click to collapse
It's because the firmware overwrite cwm with stock recovery, you must root it or directly flash custom ROM. Or use the trick from the first replier.
Sent from my GT-I9082 using Tapatalk
CWM
vahid8910 said:
hi @matutecarp99
you have to flash this file called cwm-permanentor.zip with CWM to prevent the Stock ROM to flash it's own recovery over CWM
Warning : flashing cwm-permanentor.zip makes your device status custom.
you can find cwm-permanentor.zip here http://forum.xda-developers.com/showthread.php?t=2303395
find it in section B)Rooting it's one of those 2 links.
there is other solutions for this, mentioned in tutorial in your link, but this method i said worked for me.
Click to expand...
Click to collapse
Thanks for responding! I have android 4.2.2 and my version of CWM is 6.0.4.5 this tutorial you sent me is for android 4.1 and the version of CWM "cwm-permanentor.zip" which is not .. I hope I help a friend!
No if you can help me with this, but never flashee one custom rom, I wanted to know if I could help install one with all precautions and detail because it's my first time .. ONLY IF POSSIBLE
I have the GT-I9105P with root and xposed and mods and tweaks. Thanks in advance!
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
CWM
vahid8910 said:
that cwm-permanentor.zip worked for me on 4.2.2.
but you better make sure.
Click to expand...
Click to collapse
Risk of brick? or something similar? I have to flash with CWM?
matutecarp99 said:
Risk of brick? or something similar? I have to flash with CWM?
Click to expand...
Click to collapse
install it with CWM,
idk about brick, mine didn't brick.
CWM
I'm done updating my CWM to v6.0.4.5 right now... and it works perfectly
..
From Samsung S2+ (I9105P rooted ) running on CWM v6.0.4.5 android 4.2.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
CWM
matutecarp99 said:
Well now I install it with CWM and tell them how I was. I hope everything goes well, if something goes wrong not help me? I am very nervous, I'm not used to do this
Click to expand...
Click to collapse
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
CWM
vahid8910 said:
install it with CWM,
idk about brick, mine didn't brick.
Click to expand...
Click to collapse
You install it and always comes into CWM now thank you very much to all!
Could pass me the link of the tutorial to install android 4.4.2 rom kitkat? YOU!
Cyanogenmod 11
Elucidator21 said:
Used Odin v3.07 I'm already update my CWM v6.0.4.5 before it was CWM v6.0.3.5
And now I'm ready to Flash cyanogenmod CM-11 Kitkat 4.4.2
Click to expand...
Click to collapse
You Might Pass the link CM11 kitkat 4.4.2? Finish Install CWM UN while ago! : D
And tell me What son of ESA rom errors
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
CWM
vahid8910 said:
@matutecarp99
http://forum.xda-developers.com/showthread.php?t=2568665
Don't forget to make a backup with CWM before flashing CM-11.
Click to expand...
Click to collapse
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
matutecarp99 said:
Sorry friend, but never ever flashe rom, as is done already, but I never did and do not know how the backup is done, explain me please? And also how is restored .. thanks
Click to expand...
Click to collapse
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
vahid8910 said:
you can see back up and restore in CWM.
actually backup is not necessary i suggested it because it's good to have a back up of stock rom, so whenever anything goes wrong you can restore your phone as it was.
Click to expand...
Click to collapse
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
matutecarp99 said:
As it is my first time to install a custom rom will do the backup!
Xq says build 2 build 1 etc. .. not that is!, are updates rom? And I wanted you to tell me what are the BUGS this rom
USB works? etc. ..
Ahh DOWNLOADS and above in the tutorial there are patches if I'm not mistaken, that is? I am VERY BASIC IN ANDROID APOLOGY
I am from Argentina speak non-English, use google translator xD!
Click to expand...
Click to collapse
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GApps http://wiki.cyanogenmod.org/w/Google_Apps
Cyanogenmod 11
Elucidator21 said:
Like vahid8910 said, you need to back up your device thru CWM.. did u back up your device? theres a lot of back up tutorial on youtube try to
watch 1st before flashing Cyanogenmod CM11..
You need Only the Build #5 and download Gapps... here's the link... CM11 and GooleApps http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
I already have backup done, I have "gapps-20140105-signed.zip-kk" 83.1 MB and "cm-11-20140121-UNOFFICIAL-s2vep.zip" 196 MB internal memory and external SD (I have them in the 2 memories just in case) now I have to flash. 1 -. CM11 In CWM select install if and same with gapps and reboot system now? No need to do anything WIPES dalvin cache etc. .. please explain it step by step I would not bricking THANKS
PD: I have root, I have seeder (tweak) a few mods and xposed. Also I mount folder (to passing games to external sd)
It should be checked usb debugging? And where I have to leave the backup made?
What are the bugs? I'll be able to reinstall xposed? Also change the DPI of 240-210
ALL THAT I MADE MY GALAXY S2 PLUS (I9105P)
you need to wipe it 1st before flashing CM11 and Gapps...
Cyanogenmod 11
Elucidator21 said:
you need to wipe it 1st before flashing CM11 and Gapps...
Click to expand...
Click to collapse
I tell you the steps you do and tell me if I do something wrong:
1.-Wipe data factory reset
2.-Wipe cache partition
3.-Install zip from sd card, CM11
4.-Install zip from sd card, GAPPS
5.-Reboot system now
If you do these step Ships all well? THANKS
Pls someone tell me can I flash stock ROM using clockwork..because I love stock apps...I don't have any computer....so I can't flash via Odin I installed sokp sensonic 4.4.2 KitKat ROM but I want to flash stock ROM....pls someone tell me is it possible
prateek2091995 said:
Pls someone tell me can I flash stock ROM using clockwork..because I love stock apps...I don't have any computer....so I can't flash via Odin I installed sokp sensonic 4.4.2 KitKat ROM but I want to flash stock ROM....pls someone tell me is it possible
Click to expand...
Click to collapse
Yeah it is possible, just search the stock rom which is for Clockwork and would be in .zip format
---------- Post added at 11:58 AM ---------- Previous post was at 11:56 AM ----------
eatsleep said:
Yeah it is possible, just search the stock rom which is for Clockwork and would be in .zip format
Click to expand...
Click to collapse
You can also use mobile odin......
Just follow this thread to see if your device is supported and how to do....
http://forum.xda-developers.com/showthread.php?t=1347899
prateek2091995 said:
Pls someone tell me can I flash stock ROM using clockwork..because I love stock apps...I don't have any computer....so I can't flash via Odin I installed sokp sensonic 4.4.2 KitKat ROM but I want to flash stock ROM....pls someone tell me is it possible
Click to expand...
Click to collapse
Yeah, you only need ODIN to get the recovery on the phone.
Once it is on, you can install everything (other recoveries, kernels, custom & stock ROMs) from within the recovery and you don't need a computer anymore. Just download the zip of the things you want to install and go nuts (don't forget to make a backup of your phone from within recovery first).
I have been trying to install cm11 4.4.2 by cool development on my s2plus, but getiing a "recursive metadata status 7" error.I am using the latest CWM recovery.Now I'm stuck at the recovery menu.The phone won't get past the recovery menu when turned on.
Please help!!
turn off phone and go in download mode and flash again stock firmwear
gentr said:
turn off phone and go in download mode and flash again stock firmwear
Click to expand...
Click to collapse
Thanks
Can you please tell me the entire process of flashing a stock firmware?
Brick ?
Sent from my Optimus One using XDA Free mobile app
nas619 said:
Thanks
Can you please tell me the entire process of flashing a stock firmware?
Click to expand...
Click to collapse
same as installing cwm 6.0.4.5
---------- Post added at 10:55 AM ---------- Previous post was at 10:50 AM ----------
only that we should extact stock rom before
nas619 said:
I have been trying to install cm11 4.4.2 by cool development on my s2plus, but getiing a "recursive metadata status 7" error.I am using the latest CWM recovery.Now I'm stuck at the recovery menu.The phone won't get past the recovery menu when turned on.
Please help!!
Click to expand...
Click to collapse
- Update bootloader to 4.2.2
- Install valid recovery s2ve for GT-I9105, s2vep for GT-I9105P
- Install CM11
LuK1337 said:
- Update bootloader to 4.2.2
- Install valid recovery s2ve for GT-I9105, s2vep for GT-I9105P
- Install CM11
Click to expand...
Click to collapse
Thanks for your suggestion,but I already did the things you said.
P.S. I tried installing the OMNIROM 4.4.2 and it's working perfectly.
Finally got it working!!! :victory:
Thanks to everyone behind the ROM!
I am trying to install the Carbon Rom in my device.
1. Flashed TWRP and ROOTed
2. Cleared the delvic + cache
3. Flashed the rom and gapps
4. Restarted
5. Phone goes blank at finishing booting.
Tried 3 times
Any solution to this problem???
USE SEARCH BEFORE POSTING SUCH PROBLEMS! THIS HAS BEEN DISCUSSED MANY TIMES.
Did you flash miui6? It's a problem with firmware.
I think you didn't flash miui6 (6.6.x or 5.6.11). Well there is an other solution.
https://basketbuild.com/filedl/devs?...p-6.6.10.0.zip
Flash this file after wiping. Then flash the rom and gapps.
sharan.nyn said:
USE SEARCH BEFORE POSTING SUCH PROBLEMS! THIS HAS BEEN DISCUSSED MANY TIMES.
Did you flash miui6? It's a problem with firmware.
I think you didn't flash miui6 (6.6.x or 5.6.11). Well there is an other solution.
https://basketbuild.com/filedl/devs?...p-6.6.10.0.zip
Flash this file after wiping. Then flash the rom and gapps.
Click to expand...
Click to collapse
The link is dead. Can you please provide me a live link. There are so many links I am getting confused.
Download it from miui site ,-_- there is an option bro to download the older one
faizauthar12 said:
Download it from miui site ,-_- there is an option bro to download the older one
Click to expand...
Click to collapse
I have flashed with a miui 6 rom in fastboot mode. Will it work now???
Stop asking ,just do it
faizauthar12 said:
Stop asking ,just do it
Click to expand...
Click to collapse
It says error. To be specific "Error executing the ......"
Really tired what to do now man. I am most probably doing something else wrong . BTW thanks for the help.
Use twrp bro not the stock recovery
---------- Post added at 09:23 PM ---------- Previous post was at 09:23 PM ----------
If that problem appear ,it maybe because the zip is corrupted ,try another rom dude
juabhi said:
It says error. To be specific "Error executing the ......"
Really tired what to do now man. I am most probably doing something else wrong . BTW thanks for the help.
Click to expand...
Click to collapse
You have to be patient with these stuff, and probably not panic like this
is the problem solved now?
juabhi said:
I am trying to install the Carbon Rom in my device.
1. Flashed TWRP and ROOTed
2. Cleared the delvic + cache
3. Flashed the rom and gapps
4. Restarted
5. Phone goes blank at finishing booting.
Tried 3 times
Any solution to this problem???
Click to expand...
Click to collapse
You have to wipe system and data too before indtalling the rom and not just dalvik and cache
In order to restore to MIUI, you must flash zip using stock recovery, not TWRP!
Try the fastboot method if flashing zip doesn't work for you.
Brdr first flash miui 6 old rom .then try again.