Related
Friends suggest me a good stable Rom for wt 19 i
Thanks in advance!
fanaticprakash said:
Friends suggest me a good stable Rom for wt 19 i
Thanks in advance!
Click to expand...
Click to collapse
hybroman 12 which i am using right now is extremely stable, everything working..
otherwise the cm 7.2 fxp 108 is stable too but without the stereo speaker and the walkman button..
performance wise, cm 7.2 is much better, with higher benchmarks
---------- Post added at 12:36 PM ---------- Previous post was at 12:35 PM ----------
fanaticprakash said:
Friends suggest me a good stable Rom for wt 19 i
Thanks in advance!
Click to expand...
Click to collapse
if you want to overclock, use rage kernel
Thanks Buddy!
could you give me the instructions to install hybroman 12..
fanaticprakash said:
could you give me the instructions to install hybroman 12..
Click to expand...
Click to collapse
just follow the ones given on the hybrom download site, it's pretty clear exact words,
Installation instructions
Needs unlocked bootloader
(actually hybrom does not contain a boot image.Thus, when you install hybrom you don't mess with your boot image at all.BUT recovery from nAa is installed in /system and while system is formated during the installation of hybrom,recovery messes with it self.That's why unlocked bootloader is necessary for now to install hybrom)
Copy the zip file to your SD card
Reboot your device in CWM
Make a full data wipe-factory reset
Wipe cache and Dalvik cache
Choose install zip from sd card
Wait for installation to end
Reboot
(First reboot after installation might take a while and screen gets totally black after boot animation is displayed for about a minute or twnly on first reboot)
Reboot a second time
Enjoy!
(If anyone gets stuck at se logo at first reboot,he should try this also: First make the data wipe, then install,then shutdown the device.Turn it on after about 10sec)
(Tested and confirmed by chrisbymoningka for v7)
Got some doubts..
1)What is the use of changing kernal??
2)please give me instructions to unlock the boot loader..
3)How to get CWM By installing Xrecovery or some otherway?
thank you
fanaticprakash said:
1)What is the use of changing kernal??
2)please give me instructions to unlock the boot loader..
3)How to get CWM By installing Xrecovery or some otherway?
thank you
Click to expand...
Click to collapse
1. changing kernel lets you overclock your phone, like use it at 1.2ghz, when you need it, i do not suggest it, as it decreases the battery life by a lot. also cpu governors, which is like the clock is limited to 600mhz at night, thus saving battery..
2. go to http://unlockbootloader.sonyericsson.com/ easy instructions given. remember this voids your warranty..
3.the custom kernels come with preinstalled CWM and root
Since I didn't install any kernel how can l go to cwm for my friend w8 I used x recovery ,but I didn't find x recovery for wt 19i
Sent from my WT19i
Hybrom working fine
thanks for the help i installed hybrom and rage kernal..
its working good....
fanaticprakash said:
Since I didn't install any kernel how can l go to cwm for my friend w8 I used x recovery ,but I didn't find x recovery for wt 19i
Sent from my WT19i
Click to expand...
Click to collapse
when i first installed recovery, it was through this batch script. the script is not mine, i cannot find the original thread where i found it.. read the instructions carefully
Anyway thanks buddy!
I installed the rage kernel first so i got cwm then i install the Hybrom 12 its good thanks Man!!
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
here is the picture
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
ibaz said:
hey buddy, can you give us more info aside from the pictures you attached so we can help you better and easier.. some info like, what u did before it happened, or what state ur phone have been before it happened, something you installed, etc.
cheers,
:cyclops:
Click to expand...
Click to collapse
can any one see the picture at all??? because i cant ....
ok well now the phone is pretty much got stuck at the firmware screen as show in the picture...it got stuck like this after i install it with oldin
and when i choose install from zip my first choice is REMICS-I9003-V1.5 second is I9003XXKPE both wont install... it will just abort...after few second...
i have no idea what i have done totally new to this just dont want to paid local phone shop 50$ usd just to root it so try it my self
not sure what went wrong im a bit confuse with how to use oldin so maybe that the problem i saw there is PIT bootloader PDA phone and CSC...
not sure what to put
so at pit i uselatona 20110114.pit downloaded from XDA link
and PDA i use CM9 ALPHA8 GT I9003 PDA
that all i know...oh crap...
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
ibaz said:
so, im a bit confused of your statement that you cant boot your phone. if what you mean is the two parts in the right side of your screenshot then that is the recovery mode. but if you mean that you cant boot and your phone is stuck in the boot logo or in the boot animation you are somehow in bootloop but we still could fix it.
ok, so could you enter even just in download mode (Volume down key + home key + power button) so we could try to flash a fresh rom so as to solve your issues? sorry i cant tell u immediately step by step solutions, im a bit confused with ur statements. hehe
note:
if you are confused with odin read first (there are posts here with instructions, hehe) before you start installing files with it, you dont want to get a bricked phone.
cheers buddy, and waiting for ur reply
Click to expand...
Click to collapse
i can boot into recovery mode and download mode
some other guy helped me out im able to got my phone working again i make mistake on odin file
so now my problem is how can i ICS on it... or at least with touchwiz 4 or something
all i want to do is to install REMICS-I9003-V1.5
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
ibaz said:
if all you ever wanted is to install remics 1.5, see this:
http://forum.xda-developers.com/showthread.php?t=1695175
note:
as always, a good clean flash may be recommended. meaning, clean flash of xxkpe, then to xxkpq/xxkpu before installing the rom u want to fix issues that pertain. to avoid confusion in using odin try this:
http://forum.xda-developers.com/showthread.php?t=1133787
cheers
Click to expand...
Click to collapse
i went to this page but i dont know the step to install this rom.
starcraft2010 said:
i went to this page but i dont know the step to install this rom.
Click to expand...
Click to collapse
Step by step
1. Do Nandroid backup
2. Do a factory reset/data wipe (of course you can try to install the ROM over other ICS roms)
4. Install the ROM
5. Reboot (automatically)
6. Wait till full boot of your phone
Note: Do not Format Data after the installation of ROM. Just wipe cache and dalvik cache!!
Click to expand...
Click to collapse
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
i think ur internal memory may be corrupted so if u r under warrranty flash any stock rom and take it to the service centre so if really it its internal memory is corrupted they will replace the motherboard if u r under warranty.
Hetalk said:
Step 1 means, go to cwm recovery menu and make a backup of current firmware
Step 2 wants to make sure there is no old data left that would give you errors. If you're on a stock firmware, make sure you do this, again from cwm recovery menu.
Step 3 is missing or maybe removed as it was irrelevent.
Step 4 .. you need to copy remics zip file to your sd card first. Then reboot to cwm recovery menu .. select install zip file from sdcard ... select zip file that you copied to sdcard.
After it install, go to advanced and reboot to recovery .. then clean wipe ... then go to advanced again and do a dalvik wipe.
Then reboot and Enjoy fingers-crossed
=========
To go to cwm recovery power off your device and reboot using “Volume Down + Home Key + Power Key" combination.
Click to expand...
Click to collapse
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
starcraft2010 said:
i got problem at step... 4 it will keep saying install abort ........ do i need to do special setup with oldin first
Click to expand...
Click to collapse
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Hetalk said:
Hope you arent selecting "Install update.zip from sdcard". You should be able to select the desired zip file to install.
Click to expand...
Click to collapse
no im not... i need more help on step 4 LIKE HOW TO INSTALL CWM firmware on normal android..stuff like that...
starcraft2010 said:
im getting hopeless now my phone wont boot up .... only stay in this screen.... and every time when i try to install from zip it wont..
am i missing any thing im very new to android...
Click to expand...
Click to collapse
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
ganeshbiyer said:
The best thing to do is to do a complete firmware flash.
1. XXKPE+LATONA.PIT (If this goes thru without any problem, then luck is on your side.)
2. Flash any latest GB firmware for your region.
3. Now flash the cfroot to get into recovery.
Click to expand...
Click to collapse
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
starcraft2010 said:
ok and how do i do that? i have Odin now xxkpe and latona,pit
i have no idea what to do at this point so new to me...
2 flash latest GB firmare? where is it in exact?
3. what software do u flash the cfroot?
thanks alot ^_^
Click to expand...
Click to collapse
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
ok sound great i assume if every thing is done correct i should be able to install the RemICS v1.5 then wish me luck
thanks man
ganeshbiyer said:
Go to the folowing posts for downloading and flashing XXKPE.
http://androidadvices.com/making-galaxy-sl-i9003-xxkpe-update/4/#.UA0wh6CeaSw (Recommended)
http://forum.xda-developers.com/showthread.php?t=1004647
Flashing Cfroot to get Cwm recovery.
http://forum.xda-developers.com/showthread.php?p=19018861#post19018861
Click to expand...
Click to collapse
well now i got a working normal unrooted GB 2.3.4 if i want to root it what are my step? i got ext4 format thingy and when i try to install the ICS it said abort again...
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Hetalk said:
I understand you got to xxxkpe ... did you boot your phone and it works fine?
If yes, as per ganeshbiyer's post above, you need to flash latest firmware for your region. If not sure, go for ddlf2, as it is very stable.
Once you flash that, usng odin, and phone works well, you need to root by flashing it's cf-root.
Once you do that and you can get into CWM recovery, it would be time for you to flash REMICS or CM9.
Click to expand...
Click to collapse
YO IM ON REMIS ics now but the problem now is it russian... and i cant read russian lol
recently i breaked my phone while flashing...
& main thing is BMM is also stop working, It can't starts at boot...
so i can just see the M logo...
I installed the 4.1.2 again on phone...
which boot manager is good...
can u give link of information & link of other. like CWM
which install on 4.1.2 leaked rom of atrix 2
Tech-G.ONE said:
recently i breaked my phone while flashing...
& main thing is BMM is also stop working, It can't starts at boot...
so i can just see the M logo...
I installed the 4.1.2 again on phone...
which boot manager is good...
can u give link of information & link of other. like CWM
which install on 4.1.2 leaked rom of atrix 2
Click to expand...
Click to collapse
mmmm I'm not sure if I understand... So if you want to install CWM Recovery, you should install Atrix2Bootstrap app ( 1st Attached, Unknown sources must be enable), then:
Open the app, XD
Click Bootstrap Recovery Button to install the Recovery (You must be root for this, so if you are not... You can read this thread or You can download this file and execute the bat file for root your phone. When it asks you for an option... just press 1 and wait...)
Click Reboot Recovery Button and wait... and that's all. XD
I booted my phone before... because BMM also required it...
I before installed bootstrap but it can't recover when mobile is broke... because our bootloader is remain locked even if we install it...
& also I installed leaked 4.1.2 rom.... so JY daddy patch with unlock it can't worked on phone...
so i go to BMM...
I want some app or flashable zip which help me to recover when I break my phone... Right now installed 3 ROMs using BMM ...
but I am finding option for BMM...
Hey there guys, this thread is noob friendly and is made especially for those of you who just got their first Sony phone and decided to flash a custom kernel or rom.
I am not responsible for anything that happens to your phone, use this tutorial at your own risk.
Things you'll need:
- Xperia L with Unlocked Bootloader(ofcourse haha) Look here on how to unlock your bootloader.
- Flashtool
Installing a kernel (This tutorial is for 4.2.2 only, that is 15.3.A.0.26+)
1. Download phantom kernel from here (both Phantom_modules.zip and the boot.img) Place the "Phantom_modules.zip" into your phone (sd card or internal storage) Or you can use any other kernel's boot.img
2. After installing flashtool, or if you already have it installed, open it and click on the Flash icon (the first icon from the left)
4. When it asks you to choose a bootmode, select fastboot mode and press ok.
5. After all this has done turn of your phone (Xperia L).
6. Get out your usb cable and plug it into your computer while holding the "volume up" button. (notice your phone will glow blue below, this means that it is in fastboot mode.)
7. On the pop up window where it says "By Doomlord", choose "select kernel to flash". Locate your boot.img file that you just downloaded a while ago and select it.(Notice if the boot.img file is not showing up in the file menu, on the right cornor make sure the file type is set as "*.img")
8. Be patient and wait till the kernel has been flashed, should take no longer than 10 seconds.
9. Now select "Reboot device into system" and wait for your phone to power on, now once it's powered on without any problems turn it off. Now turn on your phone and wait for a purple glow then hold down the "volume down"button. Now you'll be in CWM (clock work recovery mod) Once you're here select install from zip. Locate your "phantom_modules.zip"(or the zip file, of your kernel choice) and select yes. Wait for it to be flashed and then go back and, reboot sytem.
10. From here you can flash any kernel/rom via CWM, like Thunderzap or civic. Just boot into cwm, select install from zip and locate your kernel zip file and hit install.
Credits:
- Kernel Owners.
- Sony for their kernel source
Hit thanks if this helped you out.
I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!
Noled said:
I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!
Click to expand...
Click to collapse
No probs
Well it was the first kernel for 4.2.2 and that's why I put it up instead. I know we can use the boot.img from thunderzap too but if I'm not specific enough most of the noobs wont understand. I also chose that kernel because it comes with a recovery so then you can just flash other kernels via cwm.
Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...
R.A.B said:
Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...
Click to expand...
Click to collapse
This tutorial seems pretty fine to me, so it doesn't matter
Sent from my C2104 using xda app-developers app
my flashtool exe is not detecting the .img file why?
delacruzivancarlo25 said:
my flashtool exe is not detecting the .img file why?
Click to expand...
Click to collapse
You can changed the *sin file to *img file
faizalotai said:
You can changed the *sin file to *img file
Click to expand...
Click to collapse
thanks
Sorry for noob question, but in step 9, can I skip the flashing "phantom_modules.zip" part and keep the stock kernel?
-----
Ignore this. I thought it was CWM only. I should have researched more before installing this. But I installed it and it is working good.
Xperia L 4.2.2 c105 15.3.A.1.14
Does this work with build. Umber 15.3.A.1.14 ???
MikeL. said:
Does this work with build. Umber 15.3.A.1.14 ???
Click to expand...
Click to collapse
Yes!
Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.
n78 shadow said:
Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.
Click to expand...
Click to collapse
try this to get a working recovery
http://forum.xda-developers.com/showthread.php?p=60943487
Sent from my C2105 using XDA Free mobile app
I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????
richard el renthlei said:
I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????
Click to expand...
Click to collapse
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app
Joel16 said:
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?
richard el renthlei said:
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?
Click to expand...
Click to collapse
Flash any (4.2.2) stock rom and try again. That's why your WiFi probably isn't working. Either that or you didn't flash the kernel zip file (ex thunderzap4.1.zip) after fast booting the kernel img.
Sent from my C2104 using XDA Free mobile app
WiFi now working
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?
ramkumar2000 said:
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?
Click to expand...
Click to collapse
See joels answer for details look at the post you opened
Sent from my Xperia T using XDA Free mobile app
I have a HUGE problem. Please help me ASAP!
I just flashed my Xperia L to CM 12.1. I was already on CM 12 before. So I went into recovery, wiped everything and installed the new ROM from zip. Everything worked fine except for the network signal. I was getting no network signal at all. So, when I rebooted the phone, I saw that the ThunderZap kernel was also removed. I tried to flash the kernel using flashtool, but this particular variant has 2 .img files (bootlp and bootkk). I flashed them both using the FlashtTool. Now, when I reboot my phone, all I see is the ThunderZap logo. Please help me ASAP, as this is my only primary driver phone.
I have installed 2-3 Roms on my Xperia E dual , every time afetr finishing installation when i reboot the phone, it always got stuck at boot logo.
I tried installing NexboostV6, FireJB(V3), AOKP Rom, CM11
Nexboost showed me status 7 error
Fire JB : Installation completed , but stucked at boot logo after rebooting
AOKP : Completed installation, reboot successfully but Camera, Gallery, Sim nothing worked. Might be in Beta
CM11 : Same as AOKP
Any help in this regard would be appreciated , i want to install custom rom and i am stucked at this point.
Please help, i dont want to go back to stock ROM.
kishanamlani said:
I have installed 2-3 Roms on my Xperia E dual , every time afetr finishing installation when i reboot the phone, it always got stuck at boot logo.
I tried installing NexboostV6, FireJB(V3), AOKP Rom, CM11
Nexboost showed me status 7 error
Fire JB : Installation completed , but stucked at boot logo after rebooting
AOKP : Completed installation, reboot successfully but Camera, Gallery, Sim nothing worked. Might be in Beta
CM11 : Same as AOKP
Any help in this regard would be appreciated , i want to install custom rom and i am stucked at this point.
Please help, i dont want to go back to stock ROM.
Click to expand...
Click to collapse
I think Can't Installing 2-3 ROM At Single Phone.
cz One ROM and OTher Rom Not Have Same Module.
Try Using One ROM ur Best Choice.
Remember Only Use One Custom ROM
And UnlockbootLoader First
x7_ said:
I think Can't Installing 2-3 ROM At Single Phone.
cz One ROM and OTher Rom Not Have Same Module.
Try Using One ROM ur Best Choice.
Remember Only Use One Custom ROM
And UnlockbootLoader First
Click to expand...
Click to collapse
I think u got me wrong, I have tried to install different ROMs at different time, not all together. Because i didnt succeed in any of them.
kishanamlani said:
I think u got me wrong, I have tried to install different ROMs at different time, not all together. Because i didnt succeed in any of them.
Click to expand...
Click to collapse
Sorry My BAD
Before u Install Custom ROM,
Unlock bootloader First.
Root Ur Phone,
Install CWM,
And Flash *.zip Your Own ROM.
Did'nt Work ?
Ok i will have to try once more..
In all this mess , i forgot to check even my phone is rooted or not.
Do restoring original firmware unroot the phone ???
Sorry for so many questions, but there is no option left for me rather than this.
Thanx a lot again
Sent from my XT1068 using XDA Free mobile app
x7_ said:
Sorry My BAD
Before u Install Custom ROM,
Unlock bootloader First.
Root Ur Phone,
Install CWM,
And Flash *.zip Your Own ROM.
Did'nt Work ?
Click to expand...
Click to collapse
Hello Friend,
I got success in installing Nexboost V6 Rom ..
Like always, i got an error
After installing ROM, when i booted phone for first time, it got an error as,
" Unfortunately, Setup guide has stopped "
So please help me if you have any solution. Thanx again
Hey friend i got solution from that ROM thread.
I was just doing a silly mistake.. I skipped one step of format system from mount and storage of CWM.. I didnt knew that.
Thanx again for your help and support.
Sent from my XT1068 using XDA Free mobile app
Next time follow step by step dude
Sent from my ST26i using XDA Premium 4 mobile app
Yeah sure.. Thnx for all ur help
Sent from my XT1068 using XDA Free mobile app