Hello Guys
I have made a custom ROM for my device Karbonn A8. It gets installed all right but when I boot it up after the splash screen it gets stuck on a blank screen (even bootanimation can't load). I have to manually remove the battery and restart the phone.
I am thinking it is the issue of kernel. When I go to my about phone section I see this written (in attachment) that it is patched and I also heard somewhere that ROM is patched and custom ROM can't be installed. I don't believe that as Android is a aosp and if source codes weren't there then how can someone compile a CWMR for it already!.!
I have extracted my kernel file and found all neccessary information like boot path bla bla..
I want that I can create custom kernel but Karbonn hasn't released it's kernel source(as I heard and googled) . Luckily I have found device working on this board they are symphony w68 and K-Touch w68 phone, which makes me think that probably I can get source codes..
I also want to compile CWMR for my device but I have no clue of where and how to begin
Can please someone help me I know my ROM is correct and 100% working.
Please any one help me :crying:
Need help urgently
Come ON somebody please help!
Related
Hello Guys
I have made a custom ROM for my device Karbonn A8. It gets installed all right but when I boot it up after the splash screen it gets stuck on a blank screen (even bootanimation can't load). I have to manually remove the battery and restart the phone.
I am thinking it is the issue of kernel. When I go to my about phone section I see this written (in attachment) that it is patched and I also heard somewhere that ROM is patched and custom ROM can't be installed. I don't believe that as Android is a aosp and if source codes weren't there then how can someone compile a CWMR for it already.! I already have a CWM recovery for my device but I want to compile it on my own.
I have extracted my kernel file and found all neccessary information like boot path blah blah...
I want that I can create custom kernel but Karbonn hasn't released it's kernel source(as I heard and googled) . Luckily I have found device working on this board they are symphony w68 and K-Touch w68 phone, which makes me think that probably I can get source codes..
I also want to compile CWMR for my device but I have no clue of where and how to begin
Can please someone help me I know my ROM is correct and 100% working.
Please any one help me :crying:
Need help urgently
My only device please help
I'm no dev, but this may help to build twrp
http://forum.xda-developers.com/showthread.php?t=1943625 @Tech N You
edit... look what i found
http://forum.xda-developers.com/showpost.php?p=46421918&postcount=25
toolhas4degrees said:
I'm no dev, but this may help to build twrp
http://forum.xda-developers.com/showthread.php?t=1943625 @Tech N You
edit... look what i found
http://forum.xda-developers.com/showpost.php?p=46421918&postcount=25
Click to expand...
Click to collapse
Thanks a lot friend!
I really appreciate!
Kindly anybody help me.. How do i fix bootlooping of my phone.. i am using Cherry Mobile Q810 Broadcom.. it happened every time i will install the "framework-res apk..cant install it.. and after that when my phone get off then i on it again it heppened stock all apps and i saw until the logo only.. of m phone..
binhafidz said:
Kindly anybody help me.. How do i fix bootlooping of my phone.. i am using Cherry Mobile Q810 Broadcom.. it happened every time i will install the "framework-res apk..cant install it.. and after that when my phone get off then i on it again it heppened stock all apps and i saw until the logo only.. of m phone..
Click to expand...
Click to collapse
frramework-res apk is a system file which shouldn't be tampered with without extensive knowledge. It contains the elements of the Graphical User Interface. The bootloops are happening due to many possible reasons resulting from modifying this file. Please use only rated developer modifications or stick to stock settings. Please seek information on factory resetting device. If this is the result of running a particular mod then perhaps the mod isn't ready for your device/rom version, report it to the correct sources and leave them to correct this issue in their own time.
Thanks
Thanks
I am very thankful to that information you have given to me.. Thank you..
Hi... I am a newbie here and I hope someone will help me.. or guide me..
to start.. I have a local brand phone.. I'm from Philippines.. my phone is SKK Kraze..
I can't give much info about my device.. The problem is I got stuck on the boot logo.. It started when I became curious and start to modify the system folder.. (Yeah.. I know I'm stupid 'coz I didn't even think of making a back-up..) I just wanted to remove the sound and the manufacturer's logo on the boot.. it started very well and I actually remove the sound.. but when I rename the Media folder on the system and make a new Media folder.. (yeah.. i'm such an idiot.. I know.. ) then reboot the system, my phone got stuck in this boot logo.. and this logo is not my default boot logo.. I don't know where it came from..
I tried to use Aroma File manager because I'm thinking that if I accessed my system file.. I can get back it's original set up.. because I have the back up of the bootanimation.zip... but the problem is.. I cannot run the Aroma File manager in my stock recovery.. and I don't know how to instal the cwm ..
hope someone will help me.. and I'm sorry for my bad english..
any one??
iaSnalcA said:
any one??
Click to expand...
Click to collapse
There will be an RC that will provide assistance, you only posted and the bump your thread in an hour time frame. Please stand by and allow the help to make it's way to your thread. Thank you.
i'm very sorry... i'll just wait here... thank you..
Hi
Thanks for writing to us at XDA Assist. Unfortunately I'm unable to find any information at all for your device here on XDA, shiv isn't uncommon for low activity devices like this. Ultimately that kind of means you're stuck. Unless you want to learn how to port CWM to your device yourself, but that could be very difficult with the device in its current state. Anyway, here's a link for you:
Porting ClockworkMod Recovery to a New Device
Good luck!
Hi all,
First of all: i am new here. And sorry for my bad English.
I have here a Voyo Q901HD with a new digitizer. Everything works fine but there is one problem. The whole touchscreen is inverted... I have tried everything... Change the system.prop, searching for flash again (but there is no firmware to found), reboot, reset.. But nothing helps...
More information about the Voyo Q901HD can you find here: http:*//*en*myvoyo.com*/chanpin*/pingban*/336.shtml or www*gearbest.com*/tablet-pcs/*pp_266237.html [remove the wildcards]
There is no defective with the digitizer: it works perfect and smooth but only in the wrong direction. There should be a possibility to change it correctly in a configuration file? I hope someone can help!
Thanx for helping and kind regards
Also the 'script.bin' is no option! Is not found on the tablet...
Ok, the problem is now totaly different. I tried to install a custom mod what maybe can fix the problem. I have WDM recovery installed. I have yet CWM recovery installed. The only thing that works... When i try to install a custom mod i receive error 7. But when i recovery my original image where i have make a backup from it does also not work... The backup maked with Smartphone Flashtool and MTK Droid Tool hangs on a sometimes flashing ANDROID logo on the screen... I use the Scatter file inside the image.
Hi @haajee86
I have that same Tablet that died on me !
the tablet is on a logo bootloop and there is no info or download tools for this 4G version of the tablet on VOYO site
So i would like to ask you if you are able to send me the stock rom ? or extract it from your tablet ?
i really appreciate it.
Thanks
Yes you can extract rom from tablet using MTK droid tools,then upload to needrom.com and i can modify parameter for you.
Hi,
I have lenovo tb3 7 essentials tablet and I want to change the boot logo and animation with custom one. Do I need to flash a custom ROM to accomplish that or I can do that without custom ROM ? I've been told by an android developer that "this tablet is a mediatek device. Devices who have an mediatek soc usually have a logo partition. " and advised me to post here to get help to know what exactly I need to do to accomplish this task.
I really appreciate input or article about this.
Thanks,
Ahmad
Ok I did more research and found that we have bootanimation.zip and shutanimation.zip files that have the images for the boot/shutdown animation, and it can be easily updated by replacing the zip files with the new animation with proper animations. Seems does not require flashing a custom ROM.
But how to update the logo (static image) when that appears before the animation ? can I also change this logo without a full custom ROM ? I appreciate any guidance here.
I am new to this community, I appreciate any input from you. If I did something wrong, or if I should follow specific protocol to get help from others please let me know. I really appreciate that