Lenovo tb3 7 essentials custom logo - Android General

Hi,
I have lenovo tb3 7 essentials tablet and I want to change the boot logo and animation with custom one. Do I need to flash a custom ROM to accomplish that or I can do that without custom ROM ? I've been told by an android developer that "this tablet is a mediatek device. Devices who have an mediatek soc usually have a logo partition. " and advised me to post here to get help to know what exactly I need to do to accomplish this task.
I really appreciate input or article about this.
Thanks,
Ahmad

Ok I did more research and found that we have bootanimation.zip and shutanimation.zip files that have the images for the boot/shutdown animation, and it can be easily updated by replacing the zip files with the new animation with proper animations. Seems does not require flashing a custom ROM.
But how to update the logo (static image) when that appears before the animation ? can I also change this logo without a full custom ROM ? I appreciate any guidance here.

I am new to this community, I appreciate any input from you. If I did something wrong, or if I should follow specific protocol to get help from others please let me know. I really appreciate that

Related

[URGENT] Help needed please help!

Hello Guys
I have made a custom ROM for my device Karbonn A8. It gets installed all right but when I boot it up after the splash screen it gets stuck on a blank screen (even bootanimation can't load). I have to manually remove the battery and restart the phone.
I am thinking it is the issue of kernel. When I go to my about phone section I see this written (in attachment) that it is patched and I also heard somewhere that ROM is patched and custom ROM can't be installed. I don't believe that as Android is a aosp and if source codes weren't there then how can someone compile a CWMR for it already!.!
I have extracted my kernel file and found all neccessary information like boot path bla bla..
I want that I can create custom kernel but Karbonn hasn't released it's kernel source(as I heard and googled) . Luckily I have found device working on this board they are symphony w68 and K-Touch w68 phone, which makes me think that probably I can get source codes..
I also want to compile CWMR for my device but I have no clue of where and how to begin
Can please someone help me I know my ROM is correct and 100% working.
Please any one help me :crying:
Need help urgently
Come ON somebody please help!

[URGENT] Help needed please help!

Hello Guys
I have made a custom ROM for my device Karbonn A8. It gets installed all right but when I boot it up after the splash screen it gets stuck on a blank screen (even bootanimation can't load). I have to manually remove the battery and restart the phone.
I am thinking it is the issue of kernel. When I go to my about phone section I see this written (in attachment) that it is patched and I also heard somewhere that ROM is patched and custom ROM can't be installed. I don't believe that as Android is a aosp and if source codes weren't there then how can someone compile a CWMR for it already.! I already have a CWM recovery for my device but I want to compile it on my own.
I have extracted my kernel file and found all neccessary information like boot path blah blah...
I want that I can create custom kernel but Karbonn hasn't released it's kernel source(as I heard and googled) . Luckily I have found device working on this board they are symphony w68 and K-Touch w68 phone, which makes me think that probably I can get source codes..
I also want to compile CWMR for my device but I have no clue of where and how to begin
Can please someone help me I know my ROM is correct and 100% working.
Please any one help me :crying:
Need help urgently
My only device please help
I'm no dev, but this may help to build twrp
http://forum.xda-developers.com/showthread.php?t=1943625 @Tech N You
edit... look what i found
http://forum.xda-developers.com/showpost.php?p=46421918&postcount=25
toolhas4degrees said:
I'm no dev, but this may help to build twrp
http://forum.xda-developers.com/showthread.php?t=1943625 @Tech N You
edit... look what i found
http://forum.xda-developers.com/showpost.php?p=46421918&postcount=25
Click to expand...
Click to collapse
Thanks a lot friend!
I really appreciate!

[REQUEST]Complile any kind of recovery for Galaxy Core 2

Greetings.
I have a request about building any kind of recovery for my phone ( Samsung Galaxy Core 2 ).
Since there are no custom rom ( like CWM Roms or any kind of ) for this device there are also no custom recoveries for this device.
Have read a lot of posts and how to's about creation of custom recovery.
Have also tried with no luck CWM recovery builder ... Two friends abroad have tried to solve it with Ubuntu, but they got stucked with instalation and setup, init stuff ...
What I'm asking is is there any1 who could and will help to build any kind of recovery. I'm stucked on stock and I'm only missing whole nandroid backup like in my other android phones, It doesn't even has to be touch recovery.
The phone is Samsung Galaxy Core 2 (G355HN), it's latest build on 4.4.2 android. All infos and images, decompiled kernel and ramdisk of recovery is here.
If anything else needed I would gladly help.
I'm looking forward if any1 could help me to resolve this request. Any other infos or feedback I'll provide.
Looking forward for this request to be fullfiled.
Thx in advance ...
Regards

[Completed] my phone model is Symphony xplorer w125. my boot animation doesn't working.......

4.1.2 jelly bean , 1 gb ram
I'm assuming you've tried to change your boot animation and not referring to the stock animation. Here's a few things to keep in mind: 1st you need to ensure you're using one with the correct screen resolution as yours which can be found in the txt file within the animation. Second thing to check is if you set the correct permissions.
Unfortunately you did not provide very much detail so that's about all I can offer you at this point. If the above methods do not work please reply with proper information on what you did so we can help.
Thank you

Need Help regarding GrapheneOS

Hello I'm a student here for learning purpose. I've been messing around with custom ROM for over 3 years now and came across GrapheneOS and I liked it on my Pixel 4a due to its secureboot feature and others. So my question is can how can I use a custom boot amination in it? Since its non rooted and everything. Can it be done if so It would be a great help since I would like to use my own logo as I'm a game developer and I would like it very much. I've tried using flashing commands, tried changing it from file manager(not happening since dont have root access), magisk not working, twrp cant flash it. Is there any other way to do it? Thank you in advance.
Changing Android's boot animation always requires phone's Android got rooted.
More info here:
How To Change Boot Logo (Splash Screen) for Android Smartphones - AndroidFist
Splash Screen or Boot Logo on Android smartphone is crucial. But in case you are bored with the same old image, you can change it and here's how to do it.
androidfist.com
jwoegerbauer said:
Changing Android's boot animation always requires phone's Android got rooted.
More info here:
How To Change Boot Logo (Splash Screen) for Android Smartphones - AndroidFist
Splash Screen or Boot Logo on Android smartphone is crucial. But in case you are bored with the same old image, you can change it and here's how to do it.
androidfist.com
Click to expand...
Click to collapse
Yes I gathered that. So is there there a way to root this ROM. I also found a rooted version of GraphOS but the link is no longer supported. Another question... Can I change another Custom rom to secure boot... like LineageOS suppose, after I change the Logo? Revoke all access like similar to graphOS lets say.
jwoegerbauer said:
Changing Android's boot animation always requires phone's Android got rooted.
More info here:
How To Change Boot Logo (Splash Screen) for Android Smartphones - AndroidFist
Splash Screen or Boot Logo on Android smartphone is crucial. But in case you are bored with the same old image, you can change it and here's how to do it.
androidfist.com
Click to expand...
Click to collapse
Hello I found the source code on GitHub:
GitHub - GrapheneOS/device_google_sunfish: Pixel 4a device sources.
Pixel 4a device sources. Contribute to GrapheneOS/device_google_sunfish development by creating an account on GitHub.
github.com
I don't need step by step explanation can just redirect me to the correct thread where I can find how to change the boot image and compile it successfully. Thank you.

Categories

Resources