Database Info

[Q] Drivers and Rooting related.

Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))

Mobile Bricked,Issue in Flashing

Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
Submitted my mobile at service center and they had reinstalled OS again. Got my mobile back again.:victory:

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
hey try meta mode with sp flash tool
remove your battery and hold both volume+power button to enter meta mode
with holding those buttons connect usb and click download in sp flash tool

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:

TECHVS said:
@AnilLonely May this problem occur beacuse your drivers are not installed correctly in pc/Laptop so you need to install drivers correctly in your pc/Laptop.....so just go this link for how to installing drivers of Micromax Magnus-: http://forum.xda-developers.com/showpost.php?p=49414446&postcount=198&nocache=1&z=1086929826997220
After this you install drivers correctly in your pc/Laptop then just go to this link for flashing stock rom using sp tools for your brick devices. So just to this link and go through it-: http://forum.xda-developers.com/showthread.php?t=2167244
You can also find install Mobistel Cynus T1 Driver you can find this on obove link.
Make sure you download stock v3 rom for Micromax magnus and just flash using sp tool....
HIT THANK BUTTON IF I HELPED TO U :good:
Click to expand...
Click to collapse
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:

Siddhesh.K15 said:
His problem has been solved quite time before.The problem was while flashing via sp tool the flashing process was interrupted because of power failure or something. In such case your pc wont detect your mobile. But that doesn't mean that the device is bricked. All you need to to is uninstall drivers restart your pc and again install the drivers. It will work again:laugh:
Click to expand...
Click to collapse
yeah! siddhesh that's what happened with me power failure
and thanks for the information

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.

Hovatek said:
using USB deview, uninstall MTK, preloader and vcom drivers then manually re-install.
Click to expand...
Click to collapse
Thanks a lot for the valuable info mate.:good::highfive:

its not working out after reinstalling the drivers... the same freak msg on sp tool that usb not recognized...

AnilLonely said:
Hi Folks, i had an issue with my mobile. I bricked my mobile and now when i am trying to unbrick it i was not able to flash it using SP flash tool. I had used this tool many times and had a good idea on flashing. We have 2 mobiles in house, Me and my sis use same mobile. When i try connecting my sisters mobile my Laptop i recognizing and showing in device manager as MT65XX. but when i connect my mobile its showing some thing like alcatel. Please check the attached JPEG file and help me out friends.
Click to expand...
Click to collapse
uninstall drivers and install updated mtk drivers,use latest sp flash tool, It wl work, I had same issue with my a117 device,now its working fine

[Q] Soft bricked micromax a117(mtk 6589t) debugging mode not turned on

Hi guys,
I just recently happen to soft brick my micromax a117(mtk 6589t chipset) while using a software to increase the ram. I forgot to turn on the debugging mode. Now i am unable to flash and install stock rom cause the debugging mode was not turned on .
I am able to access the "android system recovery" mode. However, when I try to factory reset the phone I get an error showing "mount/data error".
Can anyone please help me fix my phone? I have used this phone for less than a year.
Please help me I do not have a spare phone either

anup.antony123 said:
Hi guys,
I just recently happen to soft brick my micromax a117(mtk 6589t chipset) while using a software to increase the ram. I forgot to turn on the debugging mode. Now i am unable to flash and install stock rom cause the debugging mode was not turned on .
I am able to access the "android system recovery" mode. However, when I try to factory reset the phone I get an error showing "mount/data error".
Can anyone please help me fix my phone? I have used this phone for less than a year.
Please help me I do not have a spare phone either
Click to expand...
Click to collapse
Try to install stock rom using SP tools. There will not be any problem. I have done it without debugging mode on.
Just one most imp thing is that Always use LATEST SP tools. Best of luck

navtab said:
Try to install stock rom using SP tools. There will not be any problem. I have done it without debugging mode on.
Just one most imp thing is that Always use LATEST SP tools. Best of luck
Click to expand...
Click to collapse
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.

anup.antony123 said:
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
Click to expand...
Click to collapse
i think the issue is driver were not installed properly on pc. use moborobo universal driver kit software for pc

Don't panic bro. Driver may not have installed properly. Please reinstall it
anup.antony123 said:
Hi,
I already tried to do this. However, the SP tools software does not seem to detect my phone. Making it unable to install the stock rom. I have tried installing multiple drivers but none of the seemed to have helped.
Please advice what has to be done
Thank you.
Click to expand...
Click to collapse
1. Power off the device and remove the battery(don't connect to pc juz switch off)
2. Open device manager in pc(control panel -> hardware and sound -> device manager)
3. Double click Ports(COM & LPT). It will show some COM ports available
4. Now connect your phone to pc
5. A new device appears in ports tray named something like Mediatek device(not the full name i cant remember now). It will appear for only few seconds. Before it disappears quickly right click on it and click properties
6. In the properties window goto Driver tab and click Update driver
7. A new window pops out, in that select "Browse my computer for driver software"
8. Now browse for the folder u have the a117 drivers and proceed. Windows will install the drivers.
9. Disconnect the phone and restart the pc
10. Open SP Flash Tools(try latest possible version) with adminstrator privilages, select the scatter loading and browse for the file in stock rom folder and click "Download"
11. Connect ur phone and sp tools will detect the device and wait for the process to complete.
Gud luck :good: :good:

a117 bricked
my a117 is stuck on mmx logo...pls help asap...any video tutorial or proper step by step procedure wud be appreciated as ive nvr done flashng thru sp before...thanks ..help anyone asap

[Q] Jiayu F1 bricked - What do I do?

Hi there,
I somehow hard bricked my Jiayu F1 WCDMA smartphone (MTK6572) by flashing a wrong ROM (event though it was supposed to be good).
Now, I can connect the phone to the PC and it get's recognised (the bell rings), but I can't flash anything (nor format) through SP Flash Tool, which keeps bumping the "Enable DRAM FAILED" annoying error, no matter what ROM I'm trying to feed it.
I really could use some help, or at least getting a working scatter file, preloader, etc, just to rule out a fault on the flashed files' side.
Thanks a lot.

barbas66 said:
Hi there,
I somehow hard bricked my Jiayu F1 WCDMA smartphone (MTK6572) by flashing a wrong ROM (event though it was supposed to be good).
Now, I can connect the phone to the PC and it get's recognised (the bell rings), but I can't flash anything (nor format) through SP Flash Tool, which keeps bumping the "Enable DRAM FAILED" annoying error, no matter what ROM I'm trying to feed it.
I really could use some help, or at least getting a working scatter file, preloader, etc, just to rule out a fault on the flashed files' side.
Thanks a lot.
Click to expand...
Click to collapse
1. Uninstall all vcom,preloader and MTK drivers using USBdeview then manually install vcom drivers (you can see how to manually install MT65xx (MediaTek) USB VCOM drivers on Windows if you need help doing this)
2. Once you have vcom drivers installed, delete the SP flash tool folder then re-extract a fresh copy
3. I believe you should have go the correct backup now so go ahead and flash it using sp flash tool. you can try meta mode (flash without battery while holding volume up button) if you're still getting the error

Lenovo A2010-a SP Flash Tool Problem

Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!

Stinray said:
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Click to expand...
Click to collapse
try remove the battery and start the download BEFORE your phone is connected to the computer. when your phone is connected, press volume buttons to aid detection by your computer. the download should start.
i had the same phone which i tried to recover but it was unpredictable after reflashing; it could sometimes finish booting and go to the OS but everything stopped and crashed immediately... or it would not boot at all (stuck at Lenovo logo or the second animated logo). after many times attempting to recover, i gave up, junked it, and bought another phone.

Stinray said:
Hello XDA Members!
I have a problem, i have an Lenovo A2010-a which has a bootloop, and i try to fix it.
I found this video on YouTube www youtube com/watch?v=a06g3r3I88Y (Sorry for the removing of the dots but the forum doesn't let me put the link after 10 posts, i hope i will not be warned for that) which presents how to flash the Stock ROM with SP Flash Tool and with provided link for all the stuff you need to flash it.
So let's go, i downloaded the RAR from the link which has MTK Drivers, The Stock ROM and the SP Flash Tool v5 itself.
I installed the drivers, opened SP Flash Tool with Run as Administrator, put the Scatter file from the ROM and pressed Download, then i put the USB cable on the phone turned off pressing Volume DOWN, then i saw the computer recognized the phone and the process was about to begin, it finished Download DA and now the problem occurs, the Download Boot Loader is stuck at 0% and then after 2 minutes of waiting it gives me an error: S_FT_DOWNLOAD_FAIL (4008)
The SP Flash Tool Version is v5.1516 and the MTK Drivers are installed
I don't know what to do to make it work, the phone's battery is charged 99%, The Drivers are installed, i redownloaded the file with the rom and the drivers but it seems to just not work. I want to say that i don't have the Original USB Cable for the phone but i think it doesn't matter, and also i put the USB cable in other USB Ports but it still doesn't work.
Sorry for my English, i hope i will get a fix for that, Thanks in advance!
Click to expand...
Click to collapse
Is easy to fix it just open the back cover of the phone and solder a wire from gnd to kpcolo reflash the rom and then unsolder the wire is always working on a2010