Hi.
when uploading hw6515 an error occurred (error occurred after 0.1%)
www(dot)obrazki(dot)elektroda(dot)pl/3729639900_1407423503(dot)png
on the display shows the hp logo and words "Serial v0.21".
After 2 hours without the battery starts but after calibration message appears:
"It will automatically customize your device in 3seconds.."
After this process, the device reboots and the screen appears with the HP logo and words "Serial V 0.21"
what to do?
The update comes from hp.
communication with the computer have
please help me.
sory for my englisch. Cue
resolved
Related
heyy....i have got this menacing problem with my prophet G4
2.13.0001
2.13.0001
02.20.21
2.13.9.23
when i switch it on...it goes till the blue screen showing imate and the versions of IPL/SPL etc given abv but then shows a white screen and crashes.. hv tried a soft reset/ hard reset but it duznt format....i have downloaded two roms one is JAMin_WWE_2130923_21309112_02072_0ship from clubimate.com and Prophet_orange_uk_ROM. i go into the bootloader program with three colored screen and when i connect it with the usb the "usb" comes at the bottom left of my imate jammin.....but PC doesnt recognize the device saying "windows cannot recognize the device or it as malfunctioned" active sync obviously doesnt connnect then! and i get error 260 Update error saying that PDA cannot be accessed or something...HOW DO I SOLVE THIS PROBLEM frustration
thanx in advance
Hi there guys .
I've been searching and searching, and trying and trying, but I can't seem to get past this Error [262] when I'm trying to upgrade my ROM or Radio (HTC Diamond).
What I'm doing is this basically:
I downloaded DiamonCustomRUU.exe, put it in a folder with the radio/rom (say Diamond_Radio_1.00.25.05.nbh), I connect my HTC Diamond to my pc via usb, activesync is on, I start up the RUU, go through all the steps, then at the end when the update 'starts', my phone goes off, starts up in the 4 coloured screen, activesync stops, then my phonescreen turns grey with the progress bar (stuck at 0%), and on my laptop there's a progress bar as well. It does nothing, and after about 5 minutes, I get the Error [262].
I reinstalled Activesync, but no changes. I installed HardSPLL though. I tried another USB-port, doing it without my firewall on (someone suggested it, yes I'm desperate)... I have no idea where to go from here.
Can anyone help? (sorry if this is the wrong section..)
Love
Had the normal (signed)SPL instead of the hardSPL. Can be locked
The Phone Service in my touch cruise has stopped working. It says on the home screen that there is "no service" the dialing pad and contacts are unavailable.
I have tried restting the phone taking out the battery and the sim card and nothing works.
Syncronization is also not working, when I connect it soon gives me an error and stops. But there is no error message and there is no cause provided for the error.
Hard-reset, if it still won't work, try another SIM card (for example, from someone else), or try yours in a different phone, to make sure it's not a SIM/network issue. If still no luck - it's a hardware problem.
Yes hard resetting worked. Since I did the hard reset I decided to uograde the ROM. I tried doing it but After I initiate the process the screen on the phone goes into the rainbow colors and then it seems to loose connection with the PC, then it gives me an error 260 saying not connected. Could this be a Windows 7 issue? Should I try the upgrade under Vista? (what I have a t work)
error 260 is a connection error according to the readme which comes with most roms. Is your phone synced with active sync before flashing.Also try putting your phone in bootloader screen "press the camera button and reset" and try flasing your rom then.
Also disable antivirus it sometimes stops flashing.
Yes it was synced before flashing, when I start the process it goes into bootload screen and then I hear the sound like when you unplug and replug an USB device. So it seems it drops the connection when it goes into the bootloader screen.
Hi,
I am currently using Samsung Galaxy S5. When I tried to connect my phone to charge via USB through my laptop, the message "No images found" was prompted on the screen. After I hit the <Home> button, the message disappeared and the phone worked as per normal. However, I am kind of irritated by the message each time that I connect my phone especially the phone is newly purchased.
Do let me know if you know of any ways to rectify the "bug". Thank you.
Hi
I'm french so sorry for my english, I just got my phone ... and I have a problem. When I start if, after 30 seconds it displays "invalid battery". and when I connect I have a picture with a crossed battery.
However, the battery seems to be the original
Do you know what is the problem?
Thanks for answer
evildef.free.fr/lg/IMG_20140807_183744.jpg
evildef.free.fr/lg/IMG_20140807_183848.jpg