Hello!
Sorry for my bed english.
Hi everybody!
I have big problem with my OPO.
He does not start and the display shows only fastboot mode. In Recovery Mode you come not with volume - and power button. Anything I can do or do I have to return the phone to EFOX?
Thank you so much!
Try flash back the stock ROM via fastboot.
Just click the task you wanna do. Save all the fastboot command hassle.
http://forum.xda-developers.com/one...lkit-oneplus-one-easy-toolkit-unlock-t2804322
ADB & Fastboot drivers are here in-case you need it.
http://forum.xda-developers.com/showthread.php?t=2588979
Related
Motorola xoom wifi So the other day I woke up to my tablet being dead, it was time for work so I plugged it in figuring the battery had ran down.
Get home that night and it wont turn on. Needless to say im still at that point. If I press and hold the power button and up vlm button I get the motorola symbol. Hitting the down vlm button gives me three options of android recovery, fastboot, and rsd
Selecting Android recovery says - Cold-booting linux. Reading ODM fuse:1
Selecting Fastboot says - Starting fastboot protocol support.
Selecting RSD says - Starting RSD protocol support 0. Onewire: Charger is not connected or battery is not being charged.... Battery charge level:99%
Not exactly sure whats happened. I havent installed any new software in a while and have been using it as normal for a long time.
Can anyone please help me? Is there any way for me to get it booted up? If I can get it booted up I can try to run a restore to factory on it.
Thanks in advance for any help. It is greatly appreciated.
Try fastboot a boot.img
How do I do this? Can you provide instruction?
Hooked the tablet up and tried to ADB into it however the device isnt recognized. Is there any way to turn on usb debugging? Or im I at this point SOL?
You should be able to fastboot without adb or usb debugging enabled while in fastboot mode. Make sure you have the drivers installed for the xoom on your pc. if not download them and install them.
Download the stock images for the wifi xoom hereand unzip it to a folder.
download fastboot.exe to the same folder you unzip the system images.
open a command prompt in windows and navigate to the folder you have all the files.
type fastboot and a list of commands display's
then type each line and wait till it is done before typing the next. When it is done reboot your phone by pressing power button vol up and down all at the same toime until you see the moto screen.
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
i have the same problem , my xoom doesnt boot up!
Please help!!!
when i connect my xoom , the pc makes a sound , that makes it clear that its not bricked , but how can i fix the boot thing?
Its not booting up..Please help
Hi mates,
My TF300t(unlocked) is bricked:crying: Im only able to go into TWRP(2.6.3) but i can't go into the bootloader(for using fastboot and co)
BTW, there is no Rom installed, so if i start the tablet (no matter if i press Power+Vol Down or not) i allays end in TWRP.
My TWRP is also "buggy". It has some problems, like: Unable to mount... / Unable to set emmc bootloader message.... / unable to find partition size for xyz.... So i cant use TWRP to flash/install something and factory resets didnt work.
There are a lot of good guides how to UNBrick the tf300t, but they all need fastboot. Does someone knows how i could Fix fastboot with ADB? ADB is working fine. Maybe i can use ADB to fix TWRP or even better Fastboot.
Sry for my bad english, please help my
Have you tried
adb reboot-bootloader
?
alponte said:
Have you tried
adb reboot-bootloader
?
Click to expand...
Click to collapse
Thanks to you, it worked!!! with adb i could killed TWRP and after i used this:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
After:
fastboot -i 0x0B05 flash system blob
now i back in Asus Stock rom, and i will stay there^^
THX
Access via adb on twrp 2.4.4.0
Hi folks - time to activate an really old post
I do have also problems like manckosy in 2014:
The TF300t I have here has TWRP 2.4.4.0:
- Android booting is not possible
- it's not possible to mount SD-Card
- I don't have the permission to enter the tab via adb
Does anyone of you have an idea how I can get access with adb?
Thx a lot in advance!
f_lux said:
Does anyone of you have an idea how I can get access with adb?
Click to expand...
Click to collapse
Yes, I do! Hopefully you have "Minimal ADB and Fastboot" installed on your PC.
First of all, check whether you are able to reach fastboot protocol by pressing Power and Volume down together. Fastboot protocol should appear. That means now you have ADB access via USB and you will find further help here: https://forum.xda-developers.com/sho....php?t=2179759.
ebonit said:
Yes, I do! Hopefully, you have "Minimal ADB and Fastboot" installed on your PC.
First of all, check whether you are able to reach fastboot protocol by pressing Power and Volume down together. Fastboot protocol should appear. That means now you have ADB access via USB and you will find further help here: https://forum.xda-developers.com/sho....php?t=2179759.
Click to expand...
Click to collapse
I Have a similar problem and the link above goes to a 404 page.
In my case, My Tablet boots directly to the TWRP splash screen, and freezes. I can get status and serial number via ADB, but that's all.
If I try to reboot (via ABD) I get no response.
The device appears on Windows10 devices list, but Fastboot can't see it (I get that "<waiting for device>" message). I guess that my TWRP is damaged somehow, only part of the ADB protocol is getting up.
That happened when I tried to clean up the cache and ended up messing it all up.
The Status on ADB says that the tablet is on recovery mode.
Is there a way of flashing TWRP with ADB only? Or it is bricked forever?
Thanks for any help
mau0968 said:
I Have a similar problem and the link above goes to a 404 page.
Click to expand...
Click to collapse
Sorry for the dead link. Here we go: https://forum.xda-developers.com/showthread.php?p=44244313#post44244313
Please note if you cannot reach fastboot or recovery, your device is bricked for good!
Hello everyone, I urgently need help, brought this tablet to repair, hangs on the download logo, does not start any further, customers do not have a cable to connect to the computer, I have tried all possible ways to download recovery, fastboot, and indeed where Either it does not give out, a permanent download logo, tell me who knows what, maybe I'm doing it wrong
hello friends!
i have read alot of post, and didnt find the exact same post.
i need to recover the photos from my cell, without no reason i have the "bootloop", i mean no reason because the software is stock and i have nothing do before.
Info about the phone: Model XT1032
Rom: stock 4.4.4
USB debugging: disabled
Bootloader: locked
Recovery: stock (not working)
i want to reinstall the stock firmware, without deleting the info, i hope u can help me on these.
Greetings
plz anyone?
i really need help on this
gugovod said:
hello friends!
i have read alot of post, and didnt find the exact same post.
i need to recover the photos from my cell, without no reason i have the "bootloop", i mean no reason because the software is stock and i have nothing do before.
Info about the phone: Model XT1032
Rom: stock 4.4.4
USB debugging: disabled
Bootloader: locked
Recovery: stock (not working)
i want to reinstall the stock firmware, without deleting the info, i hope u can help me on these.
Greetings
Click to expand...
Click to collapse
Hi there. Since you cannot flash a custom recovery cause your bootloader is locked and a bootloader unlock will erase the data you want to get, the only option is extract the info from fastboot mode.
You must boot the phone in fastboot mode (power and vol- for 3 seconds), install motorola drivers and download mfastboot tool. In fastboot mode you can use some commands to extract info, here you have the list of commands you can use and here is a tool that can ease the job of writing every command.
Look in the forum FAQs, help about mfasboot and drivers is there.
moralesnery said:
Hi there. Since you cannot flash a custom recovery cause your bootloader is locked and a bootloader unlock will erase the data you want to get, the only option is extract the info from fastboot mode.
You must boot the phone in fastboot mode (power and vol- for 3 seconds), install motorola drivers and download mfastboot tool. In fastboot mode you can use some commands to extract info, here you have the list of commands you can use and here is a tool that can ease the job of writing every command.
Look in the forum FAQs, help about mfasboot and drivers is there.
Click to expand...
Click to collapse
thanks for ur answer moralesnery
but its seem that i need usb debuggin, otherwise adb dosent find the device.
can allow usb debugg?
i tried in my other phone, and witht usb debugg it work just fine!
it seems that adb only work with the phone in normal status
when someone has bootloop it's constantly restart and the process will not work
fastboot works, but its seems that i cant pull thing with the fastboot menu.
Try this:
1. Boot to bootloader
2. Unlock the bootloader
3. Flash ClockworkModRecovery
4. Boot to recovery
5. Go to mounts and storage (press vol - many times, when that option is highlighted, press power)
6. Now go to mount /sdcard (press vol - many times, when that option is highlighted press popowe
7. Plug the cable from your phone to the computer. So now your PC will detect a device. And you can copy files from your phone to the PC)
Hope that this works for you, sorry for bad english.
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
okidok said:
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
Click to expand...
Click to collapse
Greetings and welcome to assist. Is this the twrp you were trying to flash ?
https://forum.xda-developers.com/android/development/twrp-t3120744
did you unlock your bootloader first and can you fastboot into recovery mode ?
Regards
Sawdoctor
did you unlock your bootloader first and can you fastboot into recovery mode ?
Click to expand...
Click to collapse
Yes I unlocked the bootloader with the code Huawei sent me.
No, I have no access to the Recovery mode anymore
I used twrp-2.8.7.0-trltexx
The device will only boot in fastboot & rescue mode.
Thanks
Hi, any ideas ?
Thank you.
I need some help. My phone is stock in fastboot mode. If i make a fastboot -reboot command, it will just reboot back to fastboot mode. I cant restart the bootloader. Im thinking i need to try and flash a fastboot rom with a stock image, but my skills are rusty. Any guidance would be much appreciated.:crying:
Hey , Just download the fastboot rom , below is the link , you will find instructions there
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
to make it easy things to remember
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
HOW TO FLASH
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 6 in fastboot mode (Power and volume-);
Connect the OnePlus 6 to PC;
Run .bat flasher you need;
Wait until the process end;
With new .bat you need to manually reboot the phone.
and i use this command flash-all-partitions.bat
_frog hair said:
I need some help. My phone is stock in fastboot mode. If i make a fastboot -reboot command, it will just reboot back to fastboot mode. I cant restart the bootloader. Im thinking i need to try and flash a fastboot rom with a stock image, but my skills are rusty. Any guidance would be much appreciated.:crying:
Click to expand...
Click to collapse
Same thing appened to me yesterday... now im in holiday withiut the pc and i cant to restore it. Did you try to install hydrogen os beta before to brick?
_frog hair said:
I need some help. My phone is stock in fastboot mode. If i make a fastboot -reboot command, it will just reboot back to fastboot mode. I cant restart the bootloader. Im thinking i need to try and flash a fastboot rom with a stock image, but my skills are rusty. Any guidance would be much appreciated.:crying:
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
I wish people would understand what the term brick means! I will also say it is 100% impossible to brick a oneplus 6 WITHOUT physical hardware damage. also fastboot mode is bootloader mode.
Thank you @Ajaykumar21066. I did some reading aswell, and first off -i must apologize for calling it a brick, since it really is a fastboot bootloop situation. Will report back when solved.
Solved using unbrick tool. Fast and easy.