Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
okidok said:
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
Click to expand...
Click to collapse
Greetings and welcome to assist. Is this the twrp you were trying to flash ?
https://forum.xda-developers.com/android/development/twrp-t3120744
did you unlock your bootloader first and can you fastboot into recovery mode ?
Regards
Sawdoctor
did you unlock your bootloader first and can you fastboot into recovery mode ?
Click to expand...
Click to collapse
Yes I unlocked the bootloader with the code Huawei sent me.
No, I have no access to the Recovery mode anymore
I used twrp-2.8.7.0-trltexx
The device will only boot in fastboot & rescue mode.
Thanks
Hi, any ideas ?
Thank you.
Related
How to enter into fastboot mode? I am not able to figure out.
Tried - adb reboot bootloader, adb reboot-bootloader, adb reboot fastboot
None of them worked, However "adb reboot recovery" opens it in recovery mode. I have installed Lenovo Le Tools also. Also tried to open it by pressing -
Vol down + Power (opens factory mode)
Vol up + Power (opens recovery mode)
Note - I have learnt that MediaTek devices doesn't have fastboot mode. I am trying to flash Ubuntu Mobile on my tab which first requires "OEM unlock" which can be done in fastboot mode but if it doesn't have fastboot mode then what's the alternative way?
Please help!
Do u have rom backup of lenovo a1000T/G?
I couldn't understand why you asked. But i can have a backup if needed.
chicksdude said:
Do u have rom backup of lenovo a1000T/G?
Click to expand...
Click to collapse
Please give me link for that...
chicksdude said:
Please give me link for that...
Click to expand...
Click to collapse
backup failed due to unable to mount data. I rooted my device with king root. flashed twrp with flashfy but super su binaray not installed.please help how to sort it out.
Llz make twrp recovery for lenovo a1000 and unlock bootloder file
after lots of reading i decided to try out cyanogenmod 12!
after full backup (even ta-partition) i downgraded my z3 to .93 and then root it succsesfully with giefroot!
everything went fine until i tryd to install the boot.img over fastboot....
i dont know exactly what went wrong but now the normal boot hangs on the sony sign and if i want to boot into flashmode (vol+ & power on button) it just throws me into fastboot mode! so i kinda stuck here and dont know what to do
how can i get out of fastboot mode? what did i wrong?
please help!
a fastboot devices gives me a device back
an adb not
i hope there is some recovery option from fastboot
It sounds like you didn't unlock your bootloader? If so either try to unlock it with flashtool (just search for a tutorial on XDA) or reflash an official fw with flash tool to recover your device.
You should be able to enter flash mode by just pressing volume down (powered off device) while plugging in the USB port.
n1ete said:
after lots of reading i decided to try out cyanogenmod 12!
after full backup (even ta-partition) i downgraded my z3 to .93 and then root it succsesfully with giefroot!
everything went fine until i tryd to install the boot.img over fastboot....
i dont know exactly what went wrong but now the normal boot hangs on the sony sign and if i want to boot into flashmode (vol+ & power on button) it just throws me into fastboot mode! so i kinda stuck here and dont know what to do
how can i get out of fastboot mode? what did i wrong?
please help!
a fastboot devices gives me a device back
an adb not
i hope there is some recovery option from fastboot
Click to expand...
Click to collapse
Not only does it sound like you have not unlocked the bootloader, but you probably have not backed up your TA, as you said you did that before you downgraded and rooted, however, you have to backup the TA partition AFTER rooting and BEFORE unlocking
Hi, im trying to root my acer t07 device, ive tried using fastboot and even sp flash tool, but i always cant boot into twrp. When I press volume down + power, it boots into factory kit test. If i do volume up + power, it shows a bootloader menu with the options of:
recovery
fastboot
normal
demo
the oem is already unlocked by the way. and during the fastboot flash recovery recovery/twrp.img there is no error
Please. I really need to root it.
flamendless said:
Hi, im trying to root my acer t07 device, ive tried using fastboot and even sp flash tool, but i always cant boot into twrp. When I press volume down + power, it boots into factory kit test. If i do volume up + power, it shows a bootloader menu with the options of:
recovery
fastboot
normal
demo
the oem is already unlocked by the way. and during the fastboot flash recovery recovery/twrp.img there is no error
Please. I really need to root it.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can see you have asked this question several times before
http://forum.xda-developers.com/search.php?searchid=431226893
All I can suggest is trying something like kingroot if fasboot and sp flash tool doesn't work
Good Luck
Sawdoctor
Hello, XDA members, please help me. I have LG Flex 2 (H955). After trying downgrade, now phone is only in fastboot mode- "[250] fastboot mode started" on screen. No download mode, and impossible reboot to any mode with fasboot tool or any box. Can not flash laf or other files via fastboot mode. How can I alive my phone? Or can you tell me where is test point in this phone? Thank u very much. Greetings from Azerbaijan.
Rauf_Baku said:
Hello, XDA members, please help me. I have LG Flex 2 (H955). After trying downgrade, now phone is only in fastboot mode- "[250] fastboot mode started" on screen. No download mode, and impossible reboot to any mode with fasboot tool or any box. Can not flash laf or other files via fastboot mode. How can I alive my phone? Or can you tell me where is test point in this phone? Thank u very much. Greetings from Azerbaijan.
Click to expand...
Click to collapse
Have you tried sending a command via the command prompt?
You should be able to do so, in fastboot mode.
Hi guys, I need some help. I flashed 1.6 in edl EU firmware with MiFlash. Now when I load the phone it comes up saying that the bootloader is unlocked and press power to continue. This stops me from holding down power and volume to get into fastboot. I have also tried going into recovery and reboot into bootloader but still no fastboot. Just bootloader is unlocked and press power to continue as I have mentioned before.
Please help! ? As need fast boot to install recovery!
ztxaxonjay said:
Hi guys, I need some help. I flashed 1.6 in edl EU firmware with MiFlash. Now when I load the phone it comes up saying that the bootloader is unlocked and press power to continue. This stops me from holding down power and volume to get into fastboot. I have also tried going into recovery and reboot into bootloader but still no fastboot. Just bootloader is unlocked and press power to continue as I have mentioned before.
Please help! ? As need fast boot to install recovery!
Click to expand...
Click to collapse
What does it say in developer options?
In development options it says bootloader is unlocked under OEM unlocking
also I turned on USB debugging
ztxaxonjay said:
In development options it says bootloader is unlocked under OEM unlocking
also I turned on USB debugging
Click to expand...
Click to collapse
Plug in your phone to your cable to your PC. Reboot the phone and soon as it turns off, hit the sound up & sound down button along with the power button. Hold these down until your PC sounds and verifies you are in EDL mode. Once in EDL, start the app on PC using admin privileges. Once the program has started, run unlock bootloader (option 4) again. Once it's complete, reboot the phone to the OS. Reboot holding power & volume up. This will take you to recovery. Now go to reboot to bootloader. When in fastboot follow the directions to install TWRP. Do not skip any steps! Apparently, steps are being skipped.
jim262 said:
Plug in your phone to your cable to your PC. Reboot the phone and soon as it turns off, hit the sound up & sound down button along with the power button. Hold these down until your PC sounds and verifies you are in EDL mode. Once in EDL, start the app on PC using admin privileges. Once the program has started, run unlock bootloader (option 4) again. Once it's complete, reboot the phone to the OS. Reboot holding power & volume up. This will take you to recovery. Now go to reboot to bootloader. When in fastboot follow the directions to install TWRP. Do not skip any steps! Apparently, steps are being skipped.
Click to expand...
Click to collapse
Hi Jim so I've followed your instructions and that has managed to get me into fastboot thank you but still not able to flash recovery it's just saying no partition and when I use the unlock boot tool it failed on the last bit for fastboot I've add photos
ztxaxonjay said:
Hi Jim so I've followed your instructions and that has managed to get me into fastboot thank you but still not able to flash recovery it's just saying no partition and when I use the unlock boot tool it failed on the last bit for fastboot I've add photos
Click to expand...
Click to collapse
I said you need to follow directions. In the directions to run <fastboot boot TWRP.img>, not flash. Then flash the installer if you wish to make it permanent, but I wouldn't recommend making it permanent to allow OTAs to work properly.
Sorry I'm not sure where I've gone wrong here I followed your instructions but when I run the axon edl tool it managed to unlock the bootloader and give me back fast boot with out any stop's on boot up but when I run the axon edl tool I got the error at the end which I posted in the picture so then after that didn't work I put it into fastboot and tried to flash the recovery myself and That didn't work either that's why I posted a photo of that as well
ztxaxonjay said:
Sorry I'm not sure where I've gone wrong here I followed your instructions but when I run the axon edl tool it managed to unlock the bootloader and give me back fast boot with out any stop's on boot up but when I run the axon edl tool I got the error at the end which I posted in the picture so then after that didn't work I put it into fastboot and tried to flash the recovery myself and That didn't work either that's why I posted a photo of that as well
Click to expand...
Click to collapse
Go into fastboot, connect to your PC and run <fastboot boot TWRP.img> then flash Magisk. Do not flash the recovery. Boot TWRP using the above command. Flashing the recovery will not work. If you read the directions, it tells you that. I have told you everything step by step. If you can access fastboot, you are done with the EDL tool, just go into fastboot and boot TWRP using the ADB command <fastboot boot TWRP. img>
---------- Post added at 06:19 AM ---------- Previous post was at 06:06 AM ----------
ztxaxonjay said:
Sorry I'm not sure where I've gone wrong here I followed your instructions but when I run the axon edl tool it managed to unlock the bootloader and give me back fast boot with out any stop's on boot up but when I run the axon edl tool I got the error at the end which I posted in the picture so then after that didn't work I put it into fastboot and tried to flash the recovery myself and That didn't work either that's why I posted a photo of that as well
Click to expand...
Click to collapse
Go into fastboot, connect to your PC and run <fastboot boot TWRP.img> then flash Magisk. Do not flash the recovery. Boot TWRP using the above command. Flashing the recovery will not work. If you read the directions, it tells you that. BTW, I don't think you read the directions. Go back and look at my previous post. You only use the EDL tool to unlock the bootloader. After you have unlocked reboot to the stock recovery and select reboot to fastboot. Then boot TWRP.