Hi, im trying to root my acer t07 device, ive tried using fastboot and even sp flash tool, but i always cant boot into twrp. When I press volume down + power, it boots into factory kit test. If i do volume up + power, it shows a bootloader menu with the options of:
recovery
fastboot
normal
demo
the oem is already unlocked by the way. and during the fastboot flash recovery recovery/twrp.img there is no error
Please. I really need to root it.
flamendless said:
Hi, im trying to root my acer t07 device, ive tried using fastboot and even sp flash tool, but i always cant boot into twrp. When I press volume down + power, it boots into factory kit test. If i do volume up + power, it shows a bootloader menu with the options of:
recovery
fastboot
normal
demo
the oem is already unlocked by the way. and during the fastboot flash recovery recovery/twrp.img there is no error
Please. I really need to root it.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can see you have asked this question several times before
http://forum.xda-developers.com/search.php?searchid=431226893
All I can suggest is trying something like kingroot if fasboot and sp flash tool doesn't work
Good Luck
Sawdoctor
Related
after lots of reading i decided to try out cyanogenmod 12!
after full backup (even ta-partition) i downgraded my z3 to .93 and then root it succsesfully with giefroot!
everything went fine until i tryd to install the boot.img over fastboot....
i dont know exactly what went wrong but now the normal boot hangs on the sony sign and if i want to boot into flashmode (vol+ & power on button) it just throws me into fastboot mode! so i kinda stuck here and dont know what to do
how can i get out of fastboot mode? what did i wrong?
please help!
a fastboot devices gives me a device back
an adb not
i hope there is some recovery option from fastboot
It sounds like you didn't unlock your bootloader? If so either try to unlock it with flashtool (just search for a tutorial on XDA) or reflash an official fw with flash tool to recover your device.
You should be able to enter flash mode by just pressing volume down (powered off device) while plugging in the USB port.
n1ete said:
after lots of reading i decided to try out cyanogenmod 12!
after full backup (even ta-partition) i downgraded my z3 to .93 and then root it succsesfully with giefroot!
everything went fine until i tryd to install the boot.img over fastboot....
i dont know exactly what went wrong but now the normal boot hangs on the sony sign and if i want to boot into flashmode (vol+ & power on button) it just throws me into fastboot mode! so i kinda stuck here and dont know what to do
how can i get out of fastboot mode? what did i wrong?
please help!
a fastboot devices gives me a device back
an adb not
i hope there is some recovery option from fastboot
Click to expand...
Click to collapse
Not only does it sound like you have not unlocked the bootloader, but you probably have not backed up your TA, as you said you did that before you downgraded and rooted, however, you have to backup the TA partition AFTER rooting and BEFORE unlocking
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
okidok said:
Hi,
While I was trying to export the original ROM from one Huawei G620S to another and something went wrong.
On the phone I was trying to backup the ROM, I was using ADB, as I used the command "fastboot flash recovery twrp.img" after the reboot my phone locks up in fastboot & rescue mode.
I cannot access Recovery mode by pressing volume up + power button, it always boots in fastboot & rescue mode.
ADB does not recognise the device anymore.
I'm stuck and in need of assistance (it was my wifes phone, so I'm a gonner...).
If you have a solution, please make the explanation easy as I am not an expert.
Thank you
Click to expand...
Click to collapse
Greetings and welcome to assist. Is this the twrp you were trying to flash ?
https://forum.xda-developers.com/android/development/twrp-t3120744
did you unlock your bootloader first and can you fastboot into recovery mode ?
Regards
Sawdoctor
did you unlock your bootloader first and can you fastboot into recovery mode ?
Click to expand...
Click to collapse
Yes I unlocked the bootloader with the code Huawei sent me.
No, I have no access to the Recovery mode anymore
I used twrp-2.8.7.0-trltexx
The device will only boot in fastboot & rescue mode.
Thanks
Hi, any ideas ?
Thank you.
Hello
I have a Google pixel 128 GB device but recently it got bricked after an ota update. Unfortunately my phone is not rooted or unlocked. So I could not do anything under fastboot, also adb is crashed.
So the phone is bricked. But it can be rectified using QPST is edl mode I suppose. But as of now there is no such development for qpst for Google pixel.
But there are many users they face the same issue recently.
Is there any chance of development for it?
you said bootloader ! you mean the phone can boot into bootloader mode ! after that you said edl mode ? i dont understand. please explain. i may help !
*The Phone Goes into Fastboot with no problems.
*In Fastboot Mode if i try to go to Recovery, The Phone Reboots and does not go to the Recovery But it Keeps on Rebooting.
So the Recovery Partition of the Phone might be Corrupted.
So im looking for ways to Flash the Recovery partition with QPST or any other methods.
Fastboot Doesn't Help Because the Bootloader is locked.
senthil19 said:
*The Phone Goes into Fastboot with no problems.
*In Fastboot Mode if i try to go to Recovery, The Phone Reboots and does not go to the Recovery But it Keeps on Rebooting.
So the Recovery Partition of the Phone might be Corrupted.
So im looking for ways to Flash the Recovery partition with QPST or any other methods.
Fastboot Doesn't Help Because the Bootloader is locked.
Click to expand...
Click to collapse
Download factory image, open up the .sh script as text, copy the fastboot commands about wiping and clearing userdata, cache , etc into a terminal using fastboot
Xdevillived666 said:
Download factory image, open up the .sh script as text, copy the fastboot commands about wiping and clearing userdata, cache , etc into a terminal using fastboot
Click to expand...
Click to collapse
I do believe I've tried this to no avail on a Verizon g-2pw4100-022-b (the "b" probably stands for "brickable").
I'm stuck in the same situation:
Power+vol down - bootloader
Bootloader to recovery - boot loop
Bootloader to barcodes - barcodes show
Edit: power on only leads to constant screen flashing unless you hold volume down for bootloader, at which point you can vol up once and power down.
Can't flash a recovery, can't flash an OTA since that requires adb sideload, which is part of recovery, and can't flash a factory image with the bootloader locked, which is only unlocked under development tools.
One thing to note is that in the bootloader screen, both "b/l" and the one below it (radio?) both say "n/a", which leads me to believe the December update from Verizon could be the cause.
Suggestions as to how to proceed are greatly appreciated.
senthil19 said:
Hello
I have a Google pixel 128 GB device but recently it got bricked after an ota update. Unfortunately my phone is not rooted or unlocked. So I could not do anything under fastboot, also adb is crashed.
So the phone is bricked. But it can be rectified using QPST is edl mode I suppose. But as of now there is no such development for qpst for Google pixel.
But there are many users they face the same issue recently.
Is there any chance of development for it?
Click to expand...
Click to collapse
I have a Reddit thread how to activate qpst .
You can also "adb reboot edl" if your PC can recognize your phone at least.
If not, power button and volume up(or down, I don't remember) for at least forty seconds sometimes brings it up
But then you'd need firmware to flash with qpst and I'm not sure how to go about doing that
---------- Post added at 07:44 AM ---------- Previous post was at 07:42 AM ----------
PoXFreak said:
I do believe I've tried this to no avail on a Verizon g-2pw4100-022-b (the "b" probably stands for "brickable").
I'm stuck in the same situation:
Power+vol down - bootloader
Bootloader to recovery - boot loop
Bootloader to barcodes - barcodes show
Edit: power on only leads to constant screen flashing unless you hold volume down for bootloader, at which point you can vol up once and power down.
Can't flash a recovery, can't flash an OTA since that requires adb sideload, which is part of recovery, and can't flash a factory image with the bootloader locked, which is only unlocked under development tools.
One thing to note is that in the bootloader screen, both "b/l" and the one below it (radio?) both say "n/a", which leads me to believe the December update from Verizon could be the cause.
Suggestions as to how to proceed are greatly appreciated.
Click to expand...
Click to collapse
Can you fastboot boot twrp ?
Are there any solutions to enter EDL Mode in google pixel without adb?
Hi guys, I need some help. I flashed 1.6 in edl EU firmware with MiFlash. Now when I load the phone it comes up saying that the bootloader is unlocked and press power to continue. This stops me from holding down power and volume to get into fastboot. I have also tried going into recovery and reboot into bootloader but still no fastboot. Just bootloader is unlocked and press power to continue as I have mentioned before.
Please help! ? As need fast boot to install recovery!
ztxaxonjay said:
Hi guys, I need some help. I flashed 1.6 in edl EU firmware with MiFlash. Now when I load the phone it comes up saying that the bootloader is unlocked and press power to continue. This stops me from holding down power and volume to get into fastboot. I have also tried going into recovery and reboot into bootloader but still no fastboot. Just bootloader is unlocked and press power to continue as I have mentioned before.
Please help! ? As need fast boot to install recovery!
Click to expand...
Click to collapse
What does it say in developer options?
In development options it says bootloader is unlocked under OEM unlocking
also I turned on USB debugging
ztxaxonjay said:
In development options it says bootloader is unlocked under OEM unlocking
also I turned on USB debugging
Click to expand...
Click to collapse
Plug in your phone to your cable to your PC. Reboot the phone and soon as it turns off, hit the sound up & sound down button along with the power button. Hold these down until your PC sounds and verifies you are in EDL mode. Once in EDL, start the app on PC using admin privileges. Once the program has started, run unlock bootloader (option 4) again. Once it's complete, reboot the phone to the OS. Reboot holding power & volume up. This will take you to recovery. Now go to reboot to bootloader. When in fastboot follow the directions to install TWRP. Do not skip any steps! Apparently, steps are being skipped.
jim262 said:
Plug in your phone to your cable to your PC. Reboot the phone and soon as it turns off, hit the sound up & sound down button along with the power button. Hold these down until your PC sounds and verifies you are in EDL mode. Once in EDL, start the app on PC using admin privileges. Once the program has started, run unlock bootloader (option 4) again. Once it's complete, reboot the phone to the OS. Reboot holding power & volume up. This will take you to recovery. Now go to reboot to bootloader. When in fastboot follow the directions to install TWRP. Do not skip any steps! Apparently, steps are being skipped.
Click to expand...
Click to collapse
Hi Jim so I've followed your instructions and that has managed to get me into fastboot thank you but still not able to flash recovery it's just saying no partition and when I use the unlock boot tool it failed on the last bit for fastboot I've add photos
ztxaxonjay said:
Hi Jim so I've followed your instructions and that has managed to get me into fastboot thank you but still not able to flash recovery it's just saying no partition and when I use the unlock boot tool it failed on the last bit for fastboot I've add photos
Click to expand...
Click to collapse
I said you need to follow directions. In the directions to run <fastboot boot TWRP.img>, not flash. Then flash the installer if you wish to make it permanent, but I wouldn't recommend making it permanent to allow OTAs to work properly.
Sorry I'm not sure where I've gone wrong here I followed your instructions but when I run the axon edl tool it managed to unlock the bootloader and give me back fast boot with out any stop's on boot up but when I run the axon edl tool I got the error at the end which I posted in the picture so then after that didn't work I put it into fastboot and tried to flash the recovery myself and That didn't work either that's why I posted a photo of that as well
ztxaxonjay said:
Sorry I'm not sure where I've gone wrong here I followed your instructions but when I run the axon edl tool it managed to unlock the bootloader and give me back fast boot with out any stop's on boot up but when I run the axon edl tool I got the error at the end which I posted in the picture so then after that didn't work I put it into fastboot and tried to flash the recovery myself and That didn't work either that's why I posted a photo of that as well
Click to expand...
Click to collapse
Go into fastboot, connect to your PC and run <fastboot boot TWRP.img> then flash Magisk. Do not flash the recovery. Boot TWRP using the above command. Flashing the recovery will not work. If you read the directions, it tells you that. I have told you everything step by step. If you can access fastboot, you are done with the EDL tool, just go into fastboot and boot TWRP using the ADB command <fastboot boot TWRP. img>
---------- Post added at 06:19 AM ---------- Previous post was at 06:06 AM ----------
ztxaxonjay said:
Sorry I'm not sure where I've gone wrong here I followed your instructions but when I run the axon edl tool it managed to unlock the bootloader and give me back fast boot with out any stop's on boot up but when I run the axon edl tool I got the error at the end which I posted in the picture so then after that didn't work I put it into fastboot and tried to flash the recovery myself and That didn't work either that's why I posted a photo of that as well
Click to expand...
Click to collapse
Go into fastboot, connect to your PC and run <fastboot boot TWRP.img> then flash Magisk. Do not flash the recovery. Boot TWRP using the above command. Flashing the recovery will not work. If you read the directions, it tells you that. BTW, I don't think you read the directions. Go back and look at my previous post. You only use the EDL tool to unlock the bootloader. After you have unlocked reboot to the stock recovery and select reboot to fastboot. Then boot TWRP.
So after having my phone successfully rooted with Magisk, I tried to port a twrp.img, obviously unsucessfully. I flashed it to the recovery partition with fastboot... and now the phone is stuck in a bootlop.
Can't power it off, and the method I usedpreviously to enter fastboot mode (power + volume up) doesn't seem to do anything now.
Is this a brick?
ssorgatem said:
So after having my phone successfully rooted with Magisk, I tried to port a twrp.img, obviously unsucessfully. I flashed it to the recovery partition with fastboot... and now the phone is stuck in a bootlop.
Can't power it off, and the method I usedpreviously to enter fastboot mode (power + volume up) doesn't seem to do anything now.
Is this a brick?
Click to expand...
Click to collapse
So I managed to unbrick my phone.
I needed to use Mediatek's SP_flash_tool ( https://forum.xda-developers.com/t/...-sp_flash_tool_linux-mtk-mediatek-soc.3160802 ) to flash a working recovery (e.g., the stock one) and everything was fine afterward.
ssorgatem said:
So after having my phone successfully rooted with Magisk, I tried to port a twrp.img, obviously unsucessfully. I flashed it to the recovery partition with fastboot... and now the phone is stuck in a bootlop.
Can't power it off, and the method I usedpreviously to enter fastboot mode (power + volume up) doesn't seem to do anything now.
Is this a brick?
Click to expand...
Click to collapse
Hi, could you be so kind to elaborate on how you rooted this phone? I am stuck between sketchy apps and incomplete help guides.
All I got done is to unlock bootloader.
Thanks!
Using Magisk, patching the stock boot.img with Magisk Manager and flashing it.