Related
Hiya,
After dealing with a half-bricked Xoom, I did some research on this problem and found a solution.
If in any case, you happen to get stuck on the "Motorola Dual-Core Technology"
Solution to this (For the MZ604, One-Click rooted):
MZ604 Stock .imgs Download: http://developer.motorola.com/products/software/
*Make sure you have fastboot in the same directory as your adb for easy access*
1. Plug in your USB cord
2. Turn off your Xoom (Vol-Up + Power)
3. Boot into fastboot (Vol-Down + Power)
4. On your computer, open up a command prompt, and type the following:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
-or-
Code:
fastboot flash boot <path to boot.img>
fastboot flash system <path to system.img>
fastboot flash recovery <path torecovery.img>
fastboot flash userdata <path userdata.img>
fastboot erase cache
fastboot oem lock
5. Reboot the Xoom
Code:
fastboot reboot
6. There you go, back to stock!
On the real though, if you can get to Fastboot (or even the Moto "Android Recovery" state), you're not THAT bricked you've got to relock and go back to out-of-box; just keep a known-good boot.img around somewhere.
You just saved my life!
Thanks for sharing OP.
I take it this method is the same for 3.1?
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Lcsglvr said:
I tried reverting back to stock using the "one click" root/unroot tool that was the first to come out for the Xoom.
Anyway, I tried the unroot process and everything was going fine, until something occurred. Now, it tries to boot up and says at the Moto Dual Core Technology screen, "Failed to boot LNX 0x0004 // Starting RSD mode 2".
Can someone help
Click to expand...
Click to collapse
Can anyone help!
Lcsglvr said:
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Can anyone help!
Click to expand...
Click to collapse
same here, anyone help ((
Lcsglvr said:
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Can anyone help!
Click to expand...
Click to collapse
You can still enter fastboot if you xoom won't shut off. Just hold the appropria oncete buttons as it reboot. Happened to me last night upgrading to 3.1. It. Wouldn't shut down at all. Once I got into fastboot my computer saw it and I was able to fix
Honestly, I almost went through all of this last night when my WIFI Xoom got stuck in a boot loop.
However, I noticed that when my recovery went to flash the new 3.1 file, I felt like it didn't take as long as it should have. The file was the right size and all and it even said that everything installed successfully, but it just kept boot looping regardless of trying over and over. So I went ahead and re-downloaded the 3.1 file and repeated the steps to flash it and everything worked.
So, before you spend a whole lot of time restoring your Xoom, simply re-download the files and try it one more time. It worked for me.
rebill said:
You can still enter fastboot if you xoom won't shut off. Just hold the appropria oncete buttons as it reboot. Happened to me last night upgrading to 3.1. It. Wouldn't shut down at all. Once I got into fastboot my computer saw it and I was able to fix
Click to expand...
Click to collapse
Thanks! Finally have some hope to recovering. I'll post steps I took later once I get this damn thing fixed.
hmmm... I'm in fastboot supposedly and tried to flash boot.img but it seems to be stuck at <waiting for device>
This happen to anyone else?
After search seems like a driver issue, but I have installed the drivers... I was previous rooted, so I know I have the drivers. Just to be sure, I ran the MotoHelper again. I don't understand. It's just seeing my device on the "Starting Fastboot protocol support."
help?
Lcsglvr said:
hmmm... I'm in fastboot supposedly and tried to flash boot.img but it seems to be stuck at <waiting for device>
This happen to anyone else?
After search seems like a driver issue, but I have installed the drivers... I was previous rooted, so I know I have the drivers. Just to be sure, I ran the MotoHelper again. I don't understand. It's just seeing my device on the "Starting Fastboot protocol support."
help?
Click to expand...
Click to collapse
Yes. How did I fix it? I returned the xoom and had a new one two days later.
If the screen says something like "Entering RSD 2" then you're boned. The xoom won't be recognized in either the current state or in fastboot state by the computer, so no amount of commands will help. Even having the stock images doesn't help with that. Even RSDLite can't see the xoom in that state.
There have been several reports of people just being honest to Motorola and them fixing the device under the warranty.
Hmm honesty. I'll give it a shot.
Sent from my ADR6300 using XDA App
Is the final OEM lock necessary? It's quite a pain as your userdata gets wiped if you unlock it...
I was stuck on bootloop, with unrecognised device, through adb was able to get back into clockwork recovery somehow at first boot, think twice down volume? Could be wrong.
I was able tto rreflash zip 3.1 over thet top again.
sry if this is different and unhelpful, bu imagine things are pretty desperate if you are considering returning the device
zerin said:
Yes. How did I fix it? I returned the xoom and had a new one two days later.
If the screen says something like "Entering RSD 2" then you're boned. The xoom won't be recognized in either the current state or in fastboot state by the computer, so no amount of commands will help. Even having the stock images doesn't help with that. Even RSDLite can't see the xoom in that state.
There have been several reports of people just being honest to Motorola and them fixing the device under the warranty.
Click to expand...
Click to collapse
You're not boned at all. I had that happen to me so I just got back into fastboot, downloaded the files in the OP put ADB, Fastboot and the adb extensions into the file I downloaded then ran the commands and got me XOOM back up and running fine.
jbartcaps said:
You're not boned at all. I had that happen to me so I just got back into fastboot, downloaded the files in the OP put ADB, Fastboot and the adb extensions into the file I downloaded then ran the commands and got me XOOM back up and running fine.
Click to expand...
Click to collapse
You were likely in RSD 3, which is recognized by the computer. RSD 2 means adb and fastboot cannot see the device at all, so no flashing images is possible.
There's several states that all look very similar. Because some success was had with one doesn't mean it works for all. Motorola recognizes and is telling users that, in this state, the device needs to be sent back to them.
Can someone help us wifi xoom. Im stuck on the motorola screen and have a lil experience. I can fast boot reboot/fastboot device and it work but cant get the files from the hwi69 to fastboot on to it. I think im entering the commands wrong. Any advice would be appreciated
TheRedDroid said:
Hiya,
After dealing with a half-bricked Xoom, I did some research on this problem and found a solution.
If in any case, you happen to get stuck on the "Motorola Dual-Core Technology"
Solution to this (For the MZ604, One-Click rooted):
MZ604 Stock .imgs Download: http://developer.motorola.com/products/software/
*Make sure you have fastboot in the same directory as your adb for easy access*
1. Plug in your USB cord
2. Turn off your Xoom (Vol-Up + Power)
3. Boot into fastboot (Vol-Down + Power)
4. On your computer, open up a command prompt, and type the following:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
-or-
Code:
fastboot flash boot <path to boot.img>
fastboot flash system <path to system.img>
fastboot flash recovery <path torecovery.img>
fastboot flash userdata <path userdata.img>
fastboot erase cache
fastboot oem lock
5. Reboot the Xoom
Code:
fastboot reboot
6. There you go, back to stock!
Click to expand...
Click to collapse
Very good info to get into fastboot protocol:
Much thanks for the info. Worked like a champ. On an updated 3.2.1 XOOM I did an unlock, re-locked the wrong way, soft bricked, unbricked back to locked state. Finally followed your steps applied stock files and XOOM is re-locked and stock rocking back at 3.01. I needed to do all this to make sure I could get it back to stock in case it goes back to BB in 2 weeks. I was lucky enough to find one at a BB just not sure if I'll keep it. I plan on trying out some roms plus I heard Motorola is planning on doing an ICS push to the XOOM. ICS is very nice. It runs great on my unlocked Verizon G-Nex.. Again Thanks..
This post not only saved my half-bricked non-rooted Xoom, but also let me flash it from the Singapore firmware (bought if from Amazon, don't ask lol) to the regular USA firmware so that I can properly root it!
Thank you so very much!!
Hey All,
My Dad's Xoom died over the weekend - 13months after purchase so is not covered by the warranty. He was browsing a site, it came up with a "Internet is not responding - do you want to continue to wait" message and he clicked Wait - after a second the tablet knocked off. It will not come on by pressing Power and only turns on by pressing Power and Vol +
It gets past the Motorolo logo screen and the device starts the boot animation, about 20 seconds into this it freezes and reboots - this continues in a loop. It's been GEDified and was running the last OTA update 4.1.2 - no root etc.
I can get into the stock recovery and performed a factory reset - but the same thing happens. I've also tried Update From USB with an OTG cable but the screen just shows Choose a package to install and under it has /sdcard but nothing else. I have a dummy zip on both the Flash disk and SD card so it's not reading either.
I've also tried to perform update via ADB - when I select it and connect to a PC (Win 7 32bit) it tries to install drivers but I see In Computer Management that it shows under Unknown. ADB Devices returns List of devices message but nothing under it.
I've also selected the fastboot command at boot, tried fastboot devices and the command does see the Xoom.
So my questions
1) Anyone seen anything like this issue before and know how to fix it?
2) Is it best to try to reinstall the ROM? If so, how do you suggest I can see it with ADB?
3) As I have Fastboot command, could I try to install CWM and see if that sees a ZIP on the sdcard - so I can install a new ROM.
Any help much appreciated :good:
so...I've just done a fastboot oem unlock
and then tried to flash the CWM recovery using the fastboot commands - no errors, press reboot and go into Recovery but still getting Android system recovery 3e :crying:
claned said:
so...I've just done a fastboot oem unlock
and then tried to flash the CWM recovery using the fastboot commands - no errors, press reboot and go into Recovery but still getting Android system recovery 3e :crying:
Click to expand...
Click to collapse
So just to add to this, I found the stock recovery.img, boot.img, userdata.img and system.img and used the fastboot commands to send all to the motorola - all succeeded without error....still the same problem though.
I installed RSD lite and tried a few SBF files but I'm getting an INI error - off to google possible solutions to that now
Hello.
Earlier today I wanted to try a new JB rom to replace ICS so I transfered it into SD card and tried to reboot into recovery.
Instead of getting to recovery, I got stuck in fastboot mode, so I'm assuming recovery has been damaged.
After a whole afternoon of researching this forum I tried for several times this tutorial in order to install a recovery and afterwards a ROM (http://forum.xda-developers.com/showthread.php?t=1088046) and similar ones in both Mac OS X and Windows 7 (tried both USB 2.0 and USB 3.0 so its not a problem from USB) and I didn't succeed at all.
When I am using Windows 7, when I use "fastboot erase recovery", I keep receiving this message "waiting device". If I write "fastboot devices", I don't get results.
When using Mac OS X, I can get via command line to the folder "platform-tools" where fastboot is located but if I write "fastboot erase recovery" or something, it says "command not found". I've read it could be because I have to set fastboot as an environmental variable, but I having trouble setting it (Mac OS Lion).
Thank you so much for reading. Please help me!!! Any clues would be really appreciated!
-----
UPDATE: I finally managed to communicate with the device.
I used the following commands from this tutorial http://androidforums.com/optimus-m-all-things-root/382525-guide-get-out-fastboot-mode-2.html
fastboot erase boot
fastboot erase recovery
fastboot erase system
fastboot flash recovery
The problem is, now I'm stuck at LG Logo, can't access fastboot... Please help, I think it's even worse now.
boot rom, pull out battery and boot normal, it does or not? if it does use terminal emulator or adb push to install custom recovery, adb will work in fastboot if you had checked android debugging
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=1146566
grigtm said:
boot rom, pull out battery and boot normal, it does or not? if it does use terminal emulator or adb push to install custom recovery, adb will work in fastboot if you had checked android debugging
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=1146566
Click to expand...
Click to collapse
I don't understand what you mean by boot rom. Every time I turn on the phone, (normal or as POWER+HOME+VOL DOWN) it goes into fastboot. When I pull out the battery, and power again it goes again into fastboot...
techdani said:
I don't understand what you mean by boot rom. Every time I turn on the phone, (normal or as POWER+HOME+VOL DOWN) it goes into fastboot. When I pull out the battery, and power again it goes again into fastboot...
Click to expand...
Click to collapse
ok, read here http://forum.xda-developers.com/showthread.php?t=1088046 do exactly what says in this thread
I have 2 Xoom tablets, in Germany, and I took the SD Card from one of them to put it on a new phone, the Tablet kept working fine until last week that I forgot to plug it and the battery ran out. When I charged it and started it, it didn´t work again, I got the Encryption message, nothing happens when I click the Reset Tablet either, I tried putting the SD card from my other Xoom but still nothing. I enter the Recovery mode and did a Factory Reset and the tablet was OK.
Battery run out again yesterday and got the same problem once again, but now factory reset is not working, tablet stays stuck at the "M" logo after doing it, I have repeat the operation a zillion times and nothing, it stays on the M. Plus I can´t turn it off either.
The model is the MZ604 and Android Version 4.0.4
I connected the xoom to the computer after installing the drives but it won´t recognize it. I got to do the fastboot and flashed motorolas images but nothing. I can´t do the adb reboot bootloader command because ADB won´t work, because I don´t have USB Debbuging checked, but I can´t check it now because I can´t get to settings (
What can I do to recover the tablet?
Anyone, is driving me crazy, no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either
I tried RDS too and after the reboot stays the same in the M logo, nothing changes. What can I do?
No ideas? :crying:
I want to save the tablet if possible.
Hi, could you explain exactly what you've tried?
In particular what you mean by "I got to do the fastboot and flashed motorolas images but nothing." and "no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either"
By flashed Motorola's images do you mean you flashed the stock images?
And when you say you flash new images but it always stays on the original, I assume you mean the recovery stays as Xoom default?
Let me know and I'll see if I can help.
alecbond said:
Hi, could you explain exactly what you've tried?
In particular what you mean by "I got to do the fastboot and flashed motorolas images but nothing." and "no matter how many time I flash new images it always stays on the original, so I can´t flash any special recoveries either"
By flashed Motorola's images do you mean you flashed the stock images?
And when you say you flash new images but it always stays on the original, I assume you mean the recovery stays as Xoom default?
Let me know and I'll see if I can help.
Click to expand...
Click to collapse
Yes I mean stock images, and yes, it always stays on Xoom default, it never changes no matter which Recovery image I flash.
The recovery is likely reverting to default because the Xoom does this automatically each boot.
We might be able to give you a recovery that stays put but the booting issue may or may not be something worse.
Being able to fix the recovery in place is reliant on adb working from recovery itself, which I'm unsure is possible.
Whilst you seem to have reasonable knowledge of flashing and using adb/fastbbot, I'll give full instructions.
I assume you have the necessary files for fastboot so I'll skip that.
Place your chosen recovery image in your fastboot folder. (I recommend ClockworkMod Touch recovery from here)
Hold shift and right click the folder containing your recovery image and fastboot files, then select 'open command prompt here'
Your PC is now setup for the fastboot process.
Connect your Xoom to your PC.
Power on your Xoom and once you see the Motorola logo, wait about 3 seconds, and press volume down.
The screen should show the Motorola logo in the center and '--> Android Recovery' in the top left.
Press volume down twice more until the top left says fastboot then press volume up.
The screen will say 'Starting Fastboot protocol support'
Now on your PC, in command prompt run the following:
fastboot flash recovery xxxx.img
Rename xxxx.img to whatever your recovery .img file is namedOnce verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Again, when you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery, you should now see your flashed recovery.
This is where I'm unsure. Try running the following:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.oldIf you are able to run this, this will rename the files that are reverting the recovery to default and prevent it happening again. If not, we can go ahead with attempting to flash stock images anyway.
To flash stock images download Build H.6.2-24 for Retail Europe (found here.)
Extract the files to your fastboot folder.
Again, reboot your Xoom, either by holding volume up and power, or from recovery.
And again, after about 3 seconds press volume down 3 times until the top left says '--> Fastboot' then press volume up.
Now run the following from command prompt:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lockThis will wipe all data on the Xoom, and hopefully reset it to stock.
Finally, run:
fastboot rebootand you should boot into Android 3.2(?), fingers crossed.
If you require further clarification or help let me know.
alecbond said:
The recovery is likely reverting to default because the Xoom does this automatically each boot.
We might be able to give you a recovery that stays put but the booting issue may or may not be something worse.
Being able to fix the recovery in place is reliant on adb working from recovery itself, which I'm unsure is possible.
Whilst you seem to have reasonable knowledge of flashing and using adb/fastbbot, I'll give full instructions.
I assume you have the necessary files for fastboot so I'll skip that.
Place your chosen recovery image in your fastboot folder. (I recommend ClockworkMod Touch recovery from here)
Hold shift and right click the folder containing your recovery image and fastboot files, then select 'open command prompt here'
Your PC is now setup for the fastboot process.
Connect your Xoom to your PC.
Power on your Xoom and once you see the Motorola logo, wait about 3 seconds, and press volume down.
The screen should show the Motorola logo in the center and '--> Android Recovery' in the top left.
Press volume down twice more until the top left says fastboot then press volume up.
The screen will say 'Starting Fastboot protocol support'
Now on your PC, in command prompt run the following:
fastboot flash recovery xxxx.img
Rename xxxx.img to whatever your recovery .img file is namedOnce verified, reboot by holding Volume up and Power. (Keep connected to PC and keep command prompt open)
Again, when you see the Motorola logo wait about 3 seconds and hit volume down. You should see 'Android Recovery' in the top left corner, now press volume up to enter recovery, you should now see your flashed recovery.
This is where I'm unsure. Try running the following:
adb remount
adb shell mv /system/recovery-from-boot.p /system/recovery-from-boot.p.old
adb shell mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.oldIf you are able to run this, this will rename the files that are reverting the recovery to default and prevent it happening again. If not, we can go ahead with attempting to flash stock images anyway.
To flash stock images download Build H.6.2-24 for Retail Europe (found here.)
Extract the files to your fastboot folder.
Again, reboot your Xoom, either by holding volume up and power, or from recovery.
And again, after about 3 seconds press volume down 3 times until the top left says '--> Fastboot' then press volume up.
Now run the following from command prompt:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lockThis will wipe all data on the Xoom, and hopefully reset it to stock.
Finally, run:
fastboot rebootand you should boot into Android 3.2(?), fingers crossed.
If you require further clarification or help let me know.
Click to expand...
Click to collapse
Thanks for the info, sadly I have done almost all that, I can´t use adb commands because I never allowed the tablet to do USB Debbuging, since I wasn´t doing anything that needed that and never thought I would need it. I think I didn´t kept the tablet connected to the PC, so I will try again and let you know if it works.
Like I said before, I'm unsure whether it'll work as I'm not an expert.
However, you may find this helps:
Whilst in recovery and connected to your PC, open Device Manager, find your Xoom, usually under 'Other devices'.
Then right click on your Xoom > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Pick your Xoom (either one if there's two shown)
Windows should confirm the driver installed then adb should work in recovery.
I believe ClockworkMod Recovery enables USB debugging anyway, through modifying default.prop
I'd recommend trying the above, and/or if that fails for any reason download Motorola USB Drivers here.
Thanks again but nothing works, I tried rebooting being connected to the PC and the same thing happens, the default recovery from the Xoom stays there, fastboot shows on the command Prompt and in the tablet that everything went ok and the new image was flashed but the rebooting kills it, and I can´t use any ADB commands because of the stupid USB Debugging, if something like this can happen, Motorola should have left it open from default or at least have a fail safe in case something like this could happen. RDS also flashes an image but when it rebbots the whole thing goes to hell, it stays on the damn logo with the same images. I think I can throw the tablet to the trash :crying:
Unless its a serious hardware issue, I wouldn't trash it! It clearly has life as you're able to successfully flash and such.
I'd recommend having a look at the FAQ.
alecbond said:
Unless its a serious hardware issue, I wouldn't trash it! It clearly has life as you're able to successfully flash and such.
I'd recommend having a look at the FAQ.
Click to expand...
Click to collapse
Thanks, but I have done everything, what is the good thing of a successful flash when the tablet returns to it´s previous state as soon as it reboots?
Plus I can´t use one of the most important things, adb, because of the usb debugging, I can´t get into the tablet to activated it, and even if there are recoveries which bypass this thing, I can´t flash them into the tablet, well I can, they just aren´t there after the reboot. And all this because the tablet run out of battery :crying:
ClockworkMod recovery itself allows the use of adb regardless of USB debugging setting.
I believe the command adb remount should allow it.
If adb is denied you can try what I said earlier
Whilst in recovery and connected to your PC, open Device Manager, find your Xoom, usually under 'Other devices'.
Then right click on your Xoom > Update driver software... > Browse my computer for driver software > Let me pick from a list of device drivers on my computer > Pick your Xoom (either one if there's two shown)
Windows should confirm the driver installed then adb should work in recovery.
Click to expand...
Click to collapse
alecbond said:
ClockworkMod recovery itself allows the use of adb regardless of USB debugging setting.
I believe the command adb remount should allow it.
If adb is denied you can try what I said earlier
Click to expand...
Click to collapse
The problem lies with the recovery, I only have the default recovery from the xoom, it doesn´t matter how many times I flash it and everything seems to work correctly, when I restart the tablet I get the default recovery. I don´t understand why this happens, command prompt and the tablet in fastboot mode tell me the recovery has been flashed, but to use it I have to reboot and when I do I always find the same good for nothing recovery.
recovery
Hello,
I don't really understand your problem with the recovery ?
When you flash a custom recovery with fast boot, you restart the tab and after 2 or 3 second you see the Motorola Logo you push the volume down
and volume up button to enter in the new recovery.
If you flash custom recovery but restart completely the TAB without manually enter in the custom recovery, each time you retrieve the original recovery.
pots22 said:
Hello,
I don't really understand your problem with the recovery ?
When you flash a custom recovery with fast boot, you restart the tab and after 2 or 3 second you see the Motorola Logo you push the volume down
and volume up button to enter in the new recovery.
If you flash custom recovery but restart completely the TAB without manually enter in the custom recovery, each time you retrieve the original recovery.
Click to expand...
Click to collapse
Here is what happens, I flash new recovery, I restart the xoom with power and volume up, when the logo appears, after 3 seconds, I push volume down, recovery option shows, I press volume up and the default recovery is still there, not the new one I just flashed.
Is really no one out there that can help? :crying:
There's nowhere stated that, however I believe you already have unlocked your bootloader, didn't you? Because it's REALLY weird that it can't flash the recovery, I mean, you left the battery run out, then after charging you wasn't able to boot normally again.
I'll think a little, but give a check if your bootloader is really unlocked, the device should have installed the recovery, and as you didn't restart it entirely (let it go after the dual core logo), the recovery should be there...
"We think so supersonic and we make our bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10 using Tapatalk HD
I have done the fastboot oem unlock command, should I do it everytime? I can´t use adb, because like I said, I never check the USB Debugging, which I have done in my other tablet now, don´t want the same thing to happen twice.
is it dead?
hgokuh said:
is it dead?
Click to expand...
Click to collapse
I unfortunately believe that yes, however I'm still thinking about it! So don't give up! As soon as I have another answer I shall post something
"We think so supersonic and we make our bombs atomic" - Eagle Fly Free (Helloween)
Sent from my Nexus 10 using Tapatalk HD
Hi I have the following problem: after I flash Cannibal open touch recovery I could not flash any .zip file so I decided that I go back to CWM touch so I restarted my phone. Phone booted into fastboot mode with the following message no boot or recovery IMG so I decided to flash recovery with fastboot. I opened the folder with fastboot command flash_recovery connect the phone to usb but the command line always showed waiting for device. I unplugged the phone and tried to press the volume keys but nothing happened as if it freezes. I pulled the battery and try it again but no response. I cant connect phone to odin because it has broken power button and after I insert the battery it always turn on itself. Please advise me what to do thank you.
Seems your drivers have gone corrupt. Try a different system and use Nexus Root Toolkit.
I tried this option but without success. Phone does not respond to anything. No volume up or volume down. It´s just stucked on bootloader.
This link says that if you get <waiting for device> , then fastboot is not configured properly. Check out the link over here.
You may also try this command "fastboot boot recovery-clockwork-6.0.4.3-crespo.img" to boot into recovery without installing it.
no hope
The reason you cannot navigate in fastboot/bootloader is that your powerswitch is probably stuck in the "on position"...does your device immediately power on when battery is inserted?
The way i solved this a few months ago was to completly remove my powerswitch from the board power my device on..use quickboot to enter fastboot menu and input commands...
Also completely removing your power button makes powering on your nexus alot more complicated.
what i did was go to download mode (holding vol+ and -) and pluging phone in..this takes you to download mode
then you need to get a copy of a boatloader file to flash via odin which will reset your phone and power it on...pm me if interested i can provide you with files necessary