Related
【How-To】【32A】IF your update to new official rom went wrong。。。
Here is some advices:
1、make a gold card.(If you cant get your CID,find it in other's device,make sure that you are belong to the same region, KHM for example)
here is the steps:
Qns wrt SG Htc Dream and SDcard
2、Download RUU pack：
http://rapidshare.com/files/267331547/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_signed_NoDriver.exe
3、Insert your gold card ,connect your G2 to your PC and power on.
4、Run RUU_Sapphire_HTC_Asia_WWE_2.16.707.3_SG_release_si gned_NoDriver.exe
Flash at your own RISK! You could brick your phone by doing the above.
the problem is, i can't find another device to looking for my CID, anyone know how to find the CID in other way?
Yes! The same problem! I can't find another one!
(*****This method might have your phone bricked, use on your own risk!*****)
There is an easy way to recover from this "Brick", if you have MyTouch 3G devices.
First off, you are going to need MyTouch 3G's original ROM(sappimg.nbh).
Connect your phone to your computer with Android SDK installed, and your phone's drivers.
open cmd, and go to your sdk's directory:
//
cd tools
fastboot devices
fastboot flash nbh sappimg.nbh
//after this step, you might get an error: Failed(.........).
//But don't be panic here, because after this step, your phone's original SPL and Radio are already flashed into your phone.
//If you get this error, please unplug your phone to your computer, and unplug your phone's battery for about 10 sec. and then plug in the battery again and restart your phone. and your phone should be stopped at the RUU screen.
//Then do the following:
fastboot devices
fastboot flash nbh sappimg.nbh
Then your phone should be restarted and your phone is fixed.
//
(*****This method might have your phone bricked, use on your own risk!*****)
it MAY be possible to just use a card formatted to FAT32, i bypassed perfect spl without using goldcard
1131022 said:
(*****This method might have your phone bricked, use on your own risk!*****)
There is an easy way to recover from this "Brick", if you have MyTouch 3G devices.
First off, you are going to need MyTouch 3G's original ROM(sappimg.nbh).
Connect your phone to your computer with Android SDK installed, and your phone's drivers.
open cmd, and go to your sdk's directory:
//
cd tools
fastboot devices
fastboot flash nbh sappimg.nbh
//after this step, you might get an error: Failed(.........).
//But don't be panic here, because after this step, your phone's original SPL and Radio are already flashed into your phone.
//If you get this error, please unplug your phone to your computer, and unplug your phone's battery for about 10 sec. and then plug in the battery again and restart your phone. and your phone should be stopped at the RUU screen.
//Then do the following:
fastboot devices
fastboot flash nbh sappimg.nbh
Then your phone should be restarted and your phone is fixed.
//
(*****This method might have your phone bricked, use on your own risk!*****)
Click to expand...
Click to collapse
This is good news! Now all I need is sappimg.nbh for my device! Device CID: VODAPC23, Device type 32A
Can somebody supply me with sapping.nbh for this CID?
same problem goldcard isn´t working
How can I get the original sappimg.nbh?
I have a friend with the same CID as mine... can I get it from there?
Sorry for the lame questions... :S
Hello again!
I have found that my device is Czech Vodafone Black HTC Magic (32A)
So I'm searching for a dump of the original ROM for this device or the RUU! Can somebody supply it PLEASE!
CID: VODAPC23
HTC Model :SAPPHIRE-D1
Part Number :99HFU071-00
Part Description :SKU,VF,Multilanguage,CZE,HTC Magic,HSUPA enable,4G/2G MCP,Sophisticate Black,w/o SIM Lock,SAPPHIRE-D1
gold card issues
those of you that are having probs with your gold cards, did you make sure you put in ur 'gold card' sd card in ur phone before you did the cat command?
so it gives you the ID of the card that's INSIDE the phone.
I need help! I rooted my new htc inspire and was downloading some of the 3rd party apps I use from market. One of the programs which was a font changer bricked my phone. I have reviewed every possible way to unbrick it and nothing works. When I go into bootloader the only options I have are hboot, which turns to hboot usb plug when plugged to the computer, fast boot, recovery, factory reset, simlock and image crc. Hboot does nothing I installed the hboot drivers and still nothing. I did recovery and it stalls on the HTC bootup screen then slowly blacks out, factory reset it just boots to the htc boot screen and sticks there. I have pulled the battery out more then 50 times, that doesnt work. Htc sync does not recognize that the phone is connected to the computer and the revoke hboot usb installer sees that the android is hooked up to the computer but doesnt do anything except tell me the drivers are installed. I used Bubby's one click root to root my phone. Can anyone help? This is the second phone I bricked and considering I just bought this I really dont have the money to buy another phone. Any help would be awesome!!!!
Have you tried an ODIN yet? Find the stock image for your phone (should be a tar), use odin, and flash it. Make sure you have the correct USB drivers for your phone installed.
In fact, look at this thread here:
http://forum.xda-developers.com/showpost.php?p=11419005&postcount=2
Ive wanted to try it but was a little weary about doing it cause I though ODIN was for capitvate phones and because the ruu is from cingular and im on AT&T. Also wonder how to do it when I can not set my phone to debug or disk drive.
remove battery and keep it outside for 12 hr. then put it back and restart...
Done that already last night after it bricked. It still does the same thing. Im downloading the ruu the sync doesnt acknowledge my phone at all and the drivers on my phone are right and up to date. Except how do I put the ruu on my phone if my phone does not bootup and if I go into the bootloader screen it takes me right to the htc boot screen and doesnt go farther. Im following all the steps that have been posted in other threads but it doesnt help when I already tried majority of these things. I dont know if there is any other option to unbrick my phone if this does not work!
Ok the RUU says it can not read my phone. I get an error saying USB connection error and says to check if the phone is connected to the usb cable and the cable is connected to the pc. All of which it is. So what do I do next as the ruu cant even read my phone?
jenny2you said:
Ok the RUU says it can not read my phone. I get an error saying USB connection error and says to check if the phone is connected to the usb cable and the cable is connected to the pc. All of which it is. So what do I do next as the ruu cant even read my phone?
Click to expand...
Click to collapse
did you find a solution finally? Because I'm running through the same situation now..... so sad.
jenny2you said:
Ok the RUU says it can not read my phone. I get an error saying USB connection error and says to check if the phone is connected to the usb cable and the cable is connected to the pc. All of which it is. So what do I do next as the ruu cant even read my phone?
Click to expand...
Click to collapse
i have same problem , did u find any solution
mine is HTC Incredible S
niledream said:
i have same problem , did u find any solution
mine is HTC Incredible S
Click to expand...
Click to collapse
Me 2 today!!!
Hi everyone,
I have just bought an used HTC Radar 4g. It worked normally until I tried to flash the ship rom from Tmobile using RUU, it got an error and cancelled at 5%. Since then, the phone stuck at the bootloader screen and I even cannot enter the usb host mode by holding camera + volume down + power.
I tried to flash another ship rom from vodafone or europe with RUU but it got error too. Factory reset couldn't help also.
I already prepared goldcard usb and Y cable for goldcard method, but I cannot enter the usb mode to do it.
Here's some information in the bootloader screen:
PI06110
SPL-1.8.160015.3(131745)
eMMC SAMSUNG 7376MB
TOUCH A1(F:80, ID:10, V20, B:AA)
Radio-16.23.02.09_2
i have the same problem with my Mozart, and if somebody knows how to fix this I would apretiate it
I am in the same boat! The phone before had PI06110 SPL-2.4 160015.3 (136036) Radio - 16.23.05.13._2.
Any idea? I heard to do a gold card but what file do I use? I got the gold card files and cables. I just need to know which one to use and flash.
thanks
mofotech
Hi, I've been searching everywhere including XDA for help, but all i get it broken links and some more broken links.
I have HTC MAGIC (32B), need to install custom recovery and change rom.
Can anyone please give me not broken links and maybe a few works of instruction on how to do it?
The device doesn't respond to Fastboot boot recovery.img, access not allowed or something, i am clueless.
I have some basic knowledge on flashing newer devices, any help would be very appreciated!
Try SuperOneClick to get root, just read and follow the instructions.
SuperOneClick :
http://forum.xda-developers.com/showpost.php?p=8532790&postcount=1
For custom recovery install Rom Manager from market.
pmerced said:
Try SuperOneClick to get root, just read and follow the instructions.
SuperOneClick :
http://forum.xda-developers.com/showpost.php?p=8532790&postcount=1
For custom recovery install Rom Manager from market.
Click to expand...
Click to collapse
Hey, thank you so much for your reply, this forum is dead.
I tried SuperOneClick, it gets stuck and doesn't root the phone...
MosesTheTool said:
Hey, thank you so much for your reply, this forum is dead.
I tried SuperOneClick, it gets stuck and doesn't root the phone...
Click to expand...
Click to collapse
Did you try different ways like he did? I also had to try different ways and finally one method worked. Give it another try and try to figure out what he did.
In one time he says:
If you're having issues with "wait for device" or if RATC is looping, try this
Unplug your USB Cable
Go to Settings > Applications > Development
Uncheck USB Debugging
Plug in your USB Cable
Unplug your USB Cable
Check USB Debugging
Plug in your USB Cable"
Click to expand...
Click to collapse
And in another he mention:
I finally figured out how to root without looping. After rooting 13 phones, this is how I did it on the first try.
Turn USB Debugging OFF
Click Root
When it says: Waiting for Device, Turn USB Debugging ON
It'll now run RATC
When it says: Starting ADB Server...
Turn USB Debugging OFF
Turn USB Debugging ON
Turn USB Debugging OFF
All BEFORE it says "Waiting for device..." again
Click to expand...
Click to collapse
Can you give more details about your device (HBOOT, RADIO.. etc.) Go to hboot or fastboot mode and post all the screen information, maybe that will help to find out what's going on.
pmerced said:
Did you try different ways like he did? I also had to try different ways and finally one method worked. Give it another try and try to figure out what he did.
In one time he says:
And in another he mention:
Can you give more details about your device (HBOOT, RADIO.. etc.) Go to hboot or fastboot mode and post all the screen information, maybe that will help to find out what's going on.
Click to expand...
Click to collapse
I tried his methods, still gets stuck. I thought an RUU will help but I can't find anything passed 3.12.0.0. all the RUUs i tried say that the version is incorrect, and have lower version than 3.12.0.0
details of phone:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0014 (SAPP10000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009,22:33:27
Currently running on 2.2.1 (Wifi seems to error).
Found version 3.12.531.1 for T-Mobile MyTouch 3G 32B:
http://www.4shared.com/file/j64ygA9t/RUU_Sapphire_T-Mobile_US_31253.html
Hi. I was given the M4 from a family member who's battery died during an OTA UPDATE, I have located the RUU for the exact phone and all meta data meet requirements, checks out ok. Installed htc mini sdk and drivers, put ruu in the same folder. I connected phone and put phone in fast boot (locked bootloader) and AM able to type fastbootvdevices and it reads my phone is connected. I type command to reboot to bootloader and it does so everything seems connected. Upon running the RUU after the first few steps and a reboot i get an error saying usb and phone are not connected.
Anyone can help? This is my first time using RUU, It seems stock recovery isn't available. Possibly in the original battery failure usb debugging was reset? And that could be the issue? Im willing to try suggestions and have rwad reams before posting, please if anyone can offer some advice that would be great, and illb donate to your endeavour. Thanks..
Paul Taraneh