HTC MAGIC 32B Needs your help - myTouch 3G, Magic Android Development

Hi, I've been searching everywhere including XDA for help, but all i get it broken links and some more broken links.
I have HTC MAGIC (32B), need to install custom recovery and change rom.
Can anyone please give me not broken links and maybe a few works of instruction on how to do it?
The device doesn't respond to Fastboot boot recovery.img, access not allowed or something, i am clueless.
I have some basic knowledge on flashing newer devices, any help would be very appreciated!

Try SuperOneClick to get root, just read and follow the instructions.
SuperOneClick :
http://forum.xda-developers.com/showpost.php?p=8532790&postcount=1
For custom recovery install Rom Manager from market.

pmerced said:
Try SuperOneClick to get root, just read and follow the instructions.
SuperOneClick :
http://forum.xda-developers.com/showpost.php?p=8532790&postcount=1
For custom recovery install Rom Manager from market.
Click to expand...
Click to collapse
Hey, thank you so much for your reply, this forum is dead.
I tried SuperOneClick, it gets stuck and doesn't root the phone...

MosesTheTool said:
Hey, thank you so much for your reply, this forum is dead.
I tried SuperOneClick, it gets stuck and doesn't root the phone...
Click to expand...
Click to collapse
Did you try different ways like he did? I also had to try different ways and finally one method worked. Give it another try and try to figure out what he did.
In one time he says:
If you're having issues with "wait for device" or if RATC is looping, try this
Unplug your USB Cable
Go to Settings > Applications > Development
Uncheck USB Debugging
Plug in your USB Cable
Unplug your USB Cable
Check USB Debugging
Plug in your USB Cable"
Click to expand...
Click to collapse
And in another he mention:
I finally figured out how to root without looping. After rooting 13 phones, this is how I did it on the first try.
Turn USB Debugging OFF
Click Root
When it says: Waiting for Device, Turn USB Debugging ON
It'll now run RATC
When it says: Starting ADB Server...
Turn USB Debugging OFF
Turn USB Debugging ON
Turn USB Debugging OFF
All BEFORE it says "Waiting for device..." again
Click to expand...
Click to collapse
Can you give more details about your device (HBOOT, RADIO.. etc.) Go to hboot or fastboot mode and post all the screen information, maybe that will help to find out what's going on.

pmerced said:
Did you try different ways like he did? I also had to try different ways and finally one method worked. Give it another try and try to figure out what he did.
In one time he says:
And in another he mention:
Can you give more details about your device (HBOOT, RADIO.. etc.) Go to hboot or fastboot mode and post all the screen information, maybe that will help to find out what's going on.
Click to expand...
Click to collapse
I tried his methods, still gets stuck. I thought an RUU will help but I can't find anything passed 3.12.0.0. all the RUUs i tried say that the version is incorrect, and have lower version than 3.12.0.0
details of phone:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0014 (SAPP10000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009,22:33:27
Currently running on 2.2.1 (Wifi seems to error).

Found version 3.12.531.1 for T-Mobile MyTouch 3G 32B:
http://www.4shared.com/file/j64ygA9t/RUU_Sapphire_T-Mobile_US_31253.html

Related

[GUIDE] One Click How to Root EVO with Unrevoked 3.21

I first want to thank everyone at UnrEVOked for what they've done. I'm posting this because the UnrEVOked post doesn't really give any instructions. Its an easy enough root, but I know I've been there before and even the simplest things can be tough if things aren't laid out. So here's a step by step tutorial.
Due to some bugs, Unrevoked 3.2 was taken down shortly after being released, but the updated version is now LIVE! So obviously we're going to bring you a video tutorial on how to do it! Thanks to the guys at Unrevoked for giving us this simple solution to rooting the HTC EVO 4G.
LINK TO VIDEO WALKTHROUGH FOR HOW TO ROOT THE EVO
From Unrevoked:
No system downgrading or /data wiping, one-click root, a full NAND unlock and no PRI downgrade.
Click to expand...
Click to collapse
Nice, right? So here's what you'll need
◄●REQUIRED DOWNLOADS●►
EVERYONE: Unrevoked3. Download the version for your OS.
WINDOWS USERS: unrEVOked modified USB driver
◄●How to Install HBOOT Drivers (Windows Users ONLY)●►
If you're using Windows, you're going to have to install the HBOOT drivers first. You can follow this video tutorial:
How to Install HBOOT Drivers
and follow along with these written instructions provided by the Unrevoked team:
Download the unrEVOked modified USB driver and expand it somewhere you will remember.
Turn off your phone, then boot it into the HBOOT menu by holding power and volume down.
On your phone, you will have to select HBOOT USB at that menu by pressing volume down four times, then power. Wait until the screen flashes through an “SD Checking” message before pressing buttons; otherwise, the phone will ignore keypresses.
Connect the phone to your Windows machine with a USB cable and wait for the phone to say HBOOT USB PLUG on screen.
Open Device Manager.
Click Start, then right click on Computer, then click Properties, then click Device Manager.
Under Other devices, you should now see the Android 1.0 device.
Right click on Android 1.0 and click Update Driver Software:
Click on Browse my computer for driver software.
Click on Browse and select the Android USB Driver folder on on your computer, click ok, then click next.
You should get a status bar indicating that the driver is installing. If you get any warnings, just click Ok.
Your driver should install.
Click Close and make sure Android Bootloader Interface is listed under Android Phone.
◄●Instructions●►
Make sure you downloaded Unrevoked3 for your OS.
If you're on Windows, make sure you "uninstall HTC Sync or any other program that might talk to the phone over USB (doubletwist, etc). They will cause problems" (Unrevoked.com).
Plug your phone into your computer with USB.
Drag down from the notification bar on your phone and select "Charge Only" and "Remember this"
Make sure your phone has USB Debugging turned on by going to Menu>>Settings>>Applications>>Development and checking USB debugging.
Run the Reflash application that you downloaded.
Unrevoked will run its processes. Follow the few instructions it gives and thats it!
You're now rooted!
no nand i assume
djR3Z said:
No system downgrading or /data wiping, one-click root, a full NAND unlock and no PRI downgrade.
Click to expand...
Click to collapse
igotsthemagicinme said:
no nand i assume
Click to expand...
Click to collapse
Look one post above
bobross said:
Look one post above
Click to expand...
Click to collapse
ahh yes... i let my eyes wonder on down to those pretty blue headers
djR3Z said:
I first want to thank everyone at UnrEVOked for what they've done. I'm posting this because the UnrEVOked post doesn't really give any instructions. Its an easy enough root, but I know I've been there before and even the simplest things can be tough if things aren't laid out. So here's a step by step tutorial. The video tutorial will be up within 24 hours
Due to some bugs, Unrevoked 3.2 was taken down shortly after being released, but the updated version is now LIVE! So obviously we're going to bring you a video tutorial on how to do it! Thanks to the guys at Unrevoked for giving us this simple solution to rooting the HTC EVO 4G.
LINK TO VIDEO WALKTHROUGH (Coming within 24 hours)
From Unrevoked:
Nice, right? So here's what you'll need
◄●REQUIRED DOWNLOADS●►
EVERYONE: Unrevoked3. Download the version for your OS.
WINDOWS USERS: unrEVOked modified USB driver
◄●How to Install HBOOT Drivers (Windows Users ONLY)●►
If you're using Windows, you're going to have to install the HBOOT drivers first. You can follow this video tutorial:
How to Install HBOOT Drivers
and follow along with these written instructions provided by the Unrevoked team:
Download the unrEVOked modified USB driver and expand it somewhere you will remember.
Turn off your phone, then boot it into the HBOOT menu by holding power and volume down.
On EVO 4G, you will have to select HBOOT USB at that menu by pressing volume down four times, then power. Wait until the screen flashes through an “SD Checking” message before pressing buttons; otherwise, the phone will ignore keypresses.
Connect the phone to your Windows machine with a USB cable and wait for the phone to say HBOOT USB PLUG on screen.
Open Device Manager.
Click Start, then right click on Computer, then click Properties, then click Device Manager.
Under Other devices, you should now see the Android 1.0 device, similar to the picture below.
Right click on Android 1.0 and click Update Driver Software. You should then be at the following screen:
Click on Browse my computer for driver software.
Click on Browse and select the Android USB Driver folder on on your computer, click ok, then click next.
You should get a status bar indicating that the driver is installing. If you get any warnings, just click Ok.
Your driver should install and your screen will look like below.
Click Close and make sure Android Bootloader Interface is listed under Android Phone.
◄●Instructions●►
Make sure you downloaded Unrevoked3 for your OS.
If you're on Windows, make sure you "uninstall HTC Sync or any other program that might talk to the phone over USB (doubletwist, etc). They will cause problems" (Unrevoked.com).
Plug your phone into your computer with USB.
Drag down from the notification bar on your phone and select "Charge Only" and "Remember this"
Make sure your phone has USB Debugging turned on by going to Menu>>Settings>>Applications>>Development and checking USB debugging.
Run the Reflash application that you downloaded.
Unrevoked will run its processes and thats it!
You're now rooted!
Click to expand...
Click to collapse
I've been having problems whereby when I turn off the EVO and then hold the "power" and "volume-down" buttons it goes directly into HBOOT - not giving me any option to select HBOOT USB. I press the voume-down button, but it doesn't do anything. Of course it winds up not being able to find PCIMAGE.zip and the root FAILS.
Any advice? All my drivers are current (I even tried to install the drivers mentioned and it said all my drivers were already current). I am in "charge mode" only, and I am in USB debugging. I am also on a Windows 7 machine.
Many thanks for your help in this matter.
Sincerely,
Kevin
can i install even if already rooted
kstagg said:
I've been having problems whereby when I turn off the EVO and then hold the "power" and "volume-down" buttons it goes directly into HBOOT - not giving me any option to select HBOOT USB. I press the voume-down button, but it doesn't do anything. Of course it winds up not being able to find PCIMAGE.zip and the root FAILS.
Any advice? All my drivers are current (I even tried to install the drivers mentioned and it said all my drivers were already current). I am in "charge mode" only, and I am in USB debugging. I am also on a Windows 7 machine.
Many thanks for your help in this matter.
Sincerely,
Kevin
Click to expand...
Click to collapse
you need to get the correct bootloader pcmimg file. Take the file drag and drop onto your SD card and then boot into hboot screen. Install and apply updates. Find the correct H-boot zip located in the eng bootloader thread located in here within the first 5 pages.
link here:
http://forum.xda-developers.com/showthread.php?t=752832
correct H-boot is 0.76
kstagg said:
I've been having problems whereby when I turn off the EVO and then hold the "power" and "volume-down" buttons it goes directly into HBOOT - not giving me any option to select HBOOT USB. I press the voume-down button, but it doesn't do anything. Of course it winds up not being able to find PCIMAGE.zip and the root FAILS.
Any advice? All my drivers are current (I even tried to install the drivers mentioned and it said all my drivers were already current). I am in "charge mode" only, and I am in USB debugging. I am also on a Windows 7 machine.
Many thanks for your help in this matter.
Sincerely,
Kevin
Click to expand...
Click to collapse
Why do you need a PC36IMG.zip ? this doesn't use one.
Probably trying to flash a ROM and ran into this problem
Thanks for posting a Guide this will help a lot of us.
If my My phone is:
Firmware version 2.1-update1
Baseband version 2.02.00.06.10
Software number 1.47.651.1
Can I use this Unrevoked 3.21 method, or is it better to use other posted methods like Whitslacks or the thread by fastRX8. Is one method better than the other?
Thanks for your advice!
URAR1004 said:
Thanks for posting a Guide this will help a lot of us.
If my My phone is:
Firmware version 2.1-update1
Baseband version 2.02.00.06.10
Software number 1.47.651.1
Can I use this Unrevoked 3.21 method, or is it better to use other posted methods like Whitslacks or the thread by fastRX8. Is one method better than the other?
Thanks for your advice!
Click to expand...
Click to collapse
You're safe using this. Easiest method IMO. Good luck
EDIT: Since you're on 2.1, go ahead and update to 2.2. You may be fine running this on 2.1, but I'm not certain.
im stuck on "htc EVO 4G" screen, am i stuck in flashing to STOCK RUU at this point?
poulosjr said:
im stuck on "htc EVO 4G" screen, am i stuck in flashing to STOCK RUU at this point?
Click to expand...
Click to collapse
There's no need for the RUU. What does the unrevoked app say its doing right now?
Video walkthrough has been posted. Check the OP for the link
I didn't use this I updated the pcm36.img but it says boot- fail pu
But it will update everything else, I bought the phone from someone he gave me the phone on the older 2.1-update1 it was originally rooted it does say S-OFF so I'm not 100% if that's my issue then towards the end it said partition failed, is my nbest bet to start from scratch from what it seems?? Flash stock evo ruu and root with unrevoked from that
poulosjr said:
I didn't use this I updated the pcm36.img but it says boot- fail pu
But it will update everything else, I bought the phone from someone he gave me the phone on the older 2.1-update1 it was originally rooted it does say S-OFF so I'm not 100% if that's my issue then towards the end it said partition failed, is my nbest bet to start from scratch from what it seems?? Flash stock evo ruu and root with unrevoked from that
Click to expand...
Click to collapse
Yeah check out my evo unroot tutorial. Starting over is probably the best option
Ok ill do that then go from there
where can I find the original RUU
seriously noob question
I did the original 3.2..can i just do 3.21 right over it??...or are there other steps i need to take..
awesome OP!! thank you!!
and this now works perfect for 2.2? and no 4g issue??

[Q] HTC Sensation bootloop

Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
fnstGoliath said:
Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
Click to expand...
Click to collapse
Hi,
Go HERE
Install 4 EXT recovery,using one of the 3 methods available.(probably third)
Then,try to install ARHD ROM.(same guide)
No need to change the firmware.
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
fnstGoliath said:
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
Click to expand...
Click to collapse
Hi,
Maybe you should run a RUU.
Look HERE
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
fnstGoliath said:
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
Click to expand...
Click to collapse
Hi,
Try installing these windows 7 & 8 drivers (assuming you have a windows 7 or 8 machine)
Reboot your PC and see if your phone is recognized in ADB.
You are s-off,so you do not have to match it 100%
Just get a RUU that is close to your region or carrier.
If you get the wrong one,it is not a problem.
It will just give you an error.
Then,just try another.
)
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
fnstGoliath said:
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
Click to expand...
Click to collapse
Hi,
Not sure what is happening with your ADB.
Look HERE for help.
In order to run a RUU ,you need to put the bootloader into fastboot,and plug in the USB.
It should show what yours is showing.
So, it should work.
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
fnstGoliath said:
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
Click to expand...
Click to collapse
Hi,
Just run the RUU.
It will only show error if it does not work.
No big deal,and no damage done.
Just try another one.
if you enable usb debugging might help too
Well.. I just started "RUU_Pyramid_HTC_Europe_1.50.401.1_Radio_10.56.9035.00U_10.14.9035.01_M_release_223042_signed" and everything went fine until installation, no errors at all. Now the installer is stuck at "restarting bootloader" (or something equal, the installation is german) and the phone didnt do anything at all. It's now 15 minutes since the installation started so I probably will try another one but isn't it weird that ther is no error at all?
What should I do if the next RUU does exactly the same?
*edit:
just seeing page 2. How should I enable usb debugging without booting the phone?
*edit2:
second RUU: Same thing, no error but it didnt go further then "Restarting bootloader".
What to do now?
Any further Ideas what I could try?
Puuuush
fnstGoliath said:
Any further Ideas what I could try?
Puuuush
Click to expand...
Click to collapse
Put phone into bootloader then connect to pc and run the RUU
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
The phone was in fastboot usb while running the ruu for sure ..
fnstGoliath said:
The phone was in fastboot usb while running the ruu for sure ..
Click to expand...
Click to collapse
Hi,
Try running a RUU with the same radio (11.22) that you have installed.
You will not damage the phone.
It is not always an exact science with RUU.
Sometimes it is just trial and error.
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
fnstGoliath said:
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
Click to expand...
Click to collapse
Hi,
Probably ,the only thing that will fix your problem is a RUU.
So,keep trying different ones until it works.
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
fnstGoliath said:
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
Click to expand...
Click to collapse
Hi,
Plug your phone into the PC.
Go to device manager,and where it says MyHTC,right click and update driver.
Browse to the windows 7 & 8 drivers I gave you earlier.
Update,unplug phone ,and reboot PC.
Get a RUU that shows 3.32 or 3.33 in the title,and matches your region
Pull your battery.
Put it back in,and hold volume down and power button together.
Scroll to fastboot.
Plug in usb and run RUU from the PC

[Q] Problems Returning Sensation XE to stock

Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
mattsd said:
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
Click to expand...
Click to collapse
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
malybru said:
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
Click to expand...
Click to collapse
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
mattsd said:
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
Click to expand...
Click to collapse
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
malybru said:
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
Click to expand...
Click to collapse
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
mattsd said:
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
Click to expand...
Click to collapse
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
rzr86 said:
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
Click to expand...
Click to collapse
LEGEND!!
Thanks
mattsd said:
LEGEND!!
Thanks
Click to expand...
Click to collapse
no problem mate
rzr86 said:
no problem mate
Click to expand...
Click to collapse
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
mattsd said:
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
Click to expand...
Click to collapse
Hi,
Check my signature.
#27
Make sure you are not using usb 3.0 slots or hubs.
Try slots at the front and back.
Use good cables.

[Q] HTC Sensation XE - Phone is restarting continuesly

Hi Experts,
I have a HTC sensation XE. Suddenly my phone is not starting and it just displays the HTC screen and restarts.
I have attached the screen shot for reference.
I'm new to Android and i wanted to try my self fixing this issue.:good:
I bought phone in Vodafone Australia outlet and I unlocked the Sim and using with other operators as well for the last 2 years.
Did you factory reset the phone and wipe cache, Dalvik, etc.? If not please do so and reinstall your Custom ROM. This happens when you have not fully wiped your phone.
wieman01 said:
Did you factory reset the phone and wipe cache, Dalvik, etc.? If not please do so and reinstall your Custom ROM. This happens when you have not fully wiped your phone.
Click to expand...
Click to collapse
actually i don't think he has a custom rom because he is on S-ON and locked
surendrakumarn see this thread
http://forum.xda-developers.com/showthread.php?t=1672425
Oh yes, I was responding prematurely. You're right, I was off-topic.
I tried factory reset, it didn't work. Ill try the steps given for RUU. Thanks.
Hi ,
I have followed the steps and installed SDK. When i execute the below command to find CID its telling "fastboot is not a recognized command"
fastboot getvar cid
In my phone is coming as fastboot USB. Is it due to that i didn't set the USB debug ON? Currently my phones is not starting so i cannot goto settings and enable USB debug, etc. Please provide a solution
surendrakumarn said:
Hi ,
I have followed the steps and installed SDK. When i execute the below command to find CID its telling "fastboot is not a recognized command"
fastboot getvar cid
In my phone is coming as fastboot USB. Is it due to that i didn't set the USB debug ON? Currently my phones is not starting so i cannot goto settings and enable USB debug, etc. Please provide a solution
Click to expand...
Click to collapse
yes usb debugging mode should be enabled
since you bought the device from vodafone Australia probably your cid is VODAP021
rzr86 said:
yes usb debugging mode should be enabled
since you bought the device from vodafone Australia probably your cid is VODAP021
Click to expand...
Click to collapse
Can you please tell me the correct RUU and the link to download it.I'm finding bit difficult to get the correct link.
surendrakumarn said:
Can you please tell me the correct RUU and the link to download it.I'm finding bit difficult to get the correct link.
Click to expand...
Click to collapse
see here
http://forum.xda-developers.com/showthread.php?t=1672425
surendrakumarn said:
Hi ,
I have followed the steps and installed SDK. When i execute the below command to find CID its telling "fastboot is not a recognized command"
fastboot getvar cid
In my phone is coming as fastboot USB. Is it due to that i didn't set the USB debug ON? Currently my phones is not starting so i cannot goto settings and enable USB debug, etc. Please provide a solution
Click to expand...
Click to collapse
I have read it somewhere that you need to run the fastboot as an administrator. Give it a try

ADB doesn't see my HTC One X

My post that died.. please read also
http://forum.xda-developers.com/showthread.php?p=48646053#post48646053
Hello guys, long story short.. a little while ago I tried upgrading my ROM to 4.4.4 and found out that i have to turn S-off and install the RUU 3.18 i think it was. Upon doing this I came to find out that my phone isn't being listed when I type adb devices. I have debugging mode on and install the latest HTC drivers and uninstalled HTC sync, but yet it wont list my device.
I did some research and found out it could be the current rom I have installed causing it not being listed and that I may have to use another ROM to get windows to see my phone. But I dont think I can flash another rom because I cant get into TWRP now. I can get in bootloader but now recovery doesnt work and i cant get into TWRP anymore,I think I also have to update Hboot too.
My question is how do I go about getting my phone listed in adb and how can install twrp again.. Its been soo long since I did this I may need some help. If i can get ADB to list my phone I should be able to do the upgrading myself.
I'm taking a break atm as this is giving me a huge headache. I know Its not hard to flash if you have ADB working. Or TWRP but I dont have either of them. Can anyone shed some light for me please..
This is whats on my bootloader page
EVITA PVT SHIP S-ON RL
HBOOT- 1.09.0000
RADIO- 0.16a.32.09.06
OpenDSP-v25.1.0.32.0405
eMMC-boot
rootbox jb evita if that matters
Thx for reading.
Any help would be greatly appreciated.
So to make sure I understand your situation:
1. You CAN boot into your rom
2. You CANNOT boot into your Recovery (I'm assuming bootloop)
3. You CANNOT see your device in adb OR fastboot (please confirm)
So here's the best case scenario. You are NOT running Windows 8.1 and you can see your device in fastboot while in the bootloader. In this case, S-OFF again and flash recovery as usual. If your ARE running Win 8.1 .... well we'll cross that bridge when we get to it.
To debug your adb problem plug your phone into your computer. Does your phone respond in any way? Do you see the device show up on your computer for file transfer? If any of these things is true, rejoice! For there is hope! This is just for assurance, but you do have developer settings turned on and adb enabled right? Have you tried other usb ports? I forget if there is authentication in 4.2.2 but if there is, did you add you trust your computer? Try revoking all trusted computers and try again. Have you tried the newest version of ADB? Have you tried a different cord? If you have tried ALL of these, open up device manager. This can be done by simply typing into the search in start on both Win7/8. Now look at the top of the list. Do you see anything like ADB Interface or Android Device? If not, do you see any unrecognized devices or any device with an exclamation mark under Other Devices or Universal Serial Bus Controller? If any of these is true, right click the device and select properties. It'll be best to post a screen shot at this point. But if you're an intrepid risk seeker, go to the driver tab and hit uninstall. Next unplug your device, wait a few moments and plug it back in. You should see a driver installation progress. I've also attached the generic Google drivers that I know for sure works should you need it. Now try adb again and hopefully your device shows up:highfive:
If all is wrong with the world, and you do not see anything when you connect your phone, try on different computer with a different cord.

Categories

Resources