Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
mattsd said:
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
Click to expand...
Click to collapse
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
malybru said:
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
Click to expand...
Click to collapse
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
mattsd said:
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
Click to expand...
Click to collapse
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
malybru said:
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
Click to expand...
Click to collapse
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
mattsd said:
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
Click to expand...
Click to collapse
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
rzr86 said:
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
Click to expand...
Click to collapse
LEGEND!!
Thanks
mattsd said:
LEGEND!!
Thanks
Click to expand...
Click to collapse
no problem mate
rzr86 said:
no problem mate
Click to expand...
Click to collapse
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
mattsd said:
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
Click to expand...
Click to collapse
Hi,
Check my signature.
#27
Make sure you are not using usb 3.0 slots or hubs.
Try slots at the front and back.
Use good cables.
Related
My phone has for some unknown reason has stopped working, as when i switch the phone on the screen light comes on but it wont charge or anything, if i am trying to connect it to linux, it does show up, and i am able to see the content of the phone but for the life of me i cant get it to go to recovery mode or anything else, it is not rooted, or anything i was in the process of using JB rooting with the wire connection when it failed, or should i say stop reponding, chances it in a loop or something but i am not too sure.
HBOOT 1.27
Sensation
locked to Network
Anyone out there able to help me get this phone working
remove battery,sim and sdcard and charge the device for 5-6 hours.put them again and see if it worked
best wishes
it the above doesnt works
then u need to unbrick ur soft bricked fone
use this >> http://forum.xda-developers.com/showthread.php?t=1522351
THANK me n the dev if it works for u
fkardame said:
it the above doesnt works
then u need to unbrick ur soft bricked fone
use this >> http://forum.xda-developers.com/showthread.php?t=1522351
THANK me n the dev if it works for u
Click to expand...
Click to collapse
tried that method and it say i dont have access in linux or rights to access the phone
rzr86 said:
remove battery,sim and sdcard and charge the device for 5-6 hours.put them again and see if it worked
best wishes
Click to expand...
Click to collapse
what does that method do?? also what could be the possibility of this phone working ??
morning guy i tried the 5-6 hrs without the battery and sd a sim in the phone and as we speak i have tried to switch on the phone, the phone just show lights on the screen around the edges but that is it, maybe i did something i also tried the power button down and down volume key, still no love or money....anymore advise
when i try to access it via linux i keep getting this "You do not have the permissions necessary to view the contents of"57f8f4bc-abf4-0000-675f-946fc0f9f25b_" what does that mean in plain english?? i have attached the files below i hope you will be able to see what the problem is thanks
darkwildchild79 said:
when i try to access it via linux i keep getting this "You do not have the permissions necessary to view the contents of"57f8f4bc-abf4-0000-675f-946fc0f9f25b_" what does that mean in plain english??
Click to expand...
Click to collapse
it means you messed up while rooting your device.
1srt i would try to boot into bootloader, i m sure you ll got screen and information on bootloader.
once you got those info check what hboot you got on it - if it is 1-27-xxx you go to follow this tut h-boot 1.27 s-on
http://forum.xda-developers.com/showthread.php?t=1631861
m2c
no bootloader the screen just light but nothing to show
darkwildchild79 said:
no bootloader the screen just light but nothing to show
Click to expand...
Click to collapse
okay are you sure you have do this right?
pwr button + vol down and let start phone booting.
if this is what you ve done and you don t see anything on bootloader screen... do you have tried some fastboot command??
phone plug on usb comp.
open terminal and type fastboot devices. (you should seee serial number)
if you got it type => 'fastboot oem boot' w/o quote
give output (you shoud see you cid_number
edit: just saw the file you attached (h-boot.img) this was a very bad idea. h-boot must be flashed only if s-off. hope you didn't brick your phone.
get see and read this post, it s a usefull post s-off or s-on => http://forum.xda-developers.com/showpost.php?p=21989063&postcount=1
you should know if your device is s-on or s-off...
darkwildchild79 said:
tried that method and it say i dont have access in linux or rights to access the phone
what does that method do?? also what could be the possibility of this phone working ??
Click to expand...
Click to collapse
u are suppose to get the phone driver in ur linux first then doo all the processses
well ur fone is bricked n u need to unbrick it using the above link only
no other method for time being
install ur fone driver using the codes in linux and then do as the unbricking method says
Hello guys, i am new here, yes its my first post, yes i have been posting on forums in the past, and yes i want to cry.
I just got this brand new nexus s from Videotron a couples of months back, someone told me to look for Cyanogenmod, i did, i installed it, with superuser rooted/unlocked. loved it, untill recently i rebooted the device due to battery outage, and it was stuck to the google logo, then i opened clockworkmod and did a restore, it worked!
Then, last week, an update was pushed to the phone about jelly beans, (4.1.1), i clicked INSTALL NOW, i was at home, plugged in.
The install failed (Android logo on his back with red triangle warning) i waited 2 hours, it was still there, i had to remove the battery.
Now, Clockworkmod is not starting. (Its the default bootloader (as usual) and the next page (in the RECOVERY option) its the default "Android system recovery <3a>" with those 4 options
-reboot system now
-apply update from /sdcard
-wipe data/factory reset
-wipe cache partition
...
i did them all, tried everything its still not booting.
I tried everything i could find on all the forums, fastboot, adb nvflash... but. when i plug in my device in the pc i don't think its seen by the maching (unless i click the "Turn on USB Storage) BUT I CANT CLICK IT :'(
Model # is GT-i9020T
I really need a pro to help me out, and i promise to give you compensation if you can fix it, via paypal.
I am on facebook daily, on IRC too. msn too,
I don't care if we manage to install ice cream sandwich, jellybean or even freaking BBq peanuts..
I just need a working "facebook machine"
Thank you and ill be looking at this post every hour.
Use odin?
Sent from my Nexus S using xda premium
al_madd said:
Use odin?
Click to expand...
Click to collapse
I looked at some tutorials about odin, but i cannot find all the appropriate files for my phone.
Would you be able to point me in the correct direction?
Free advice : you need to install fastboot on your computer.
You can fix this by holding volume up, and then hold power at the same time until you see the bootloader menu.
Then, connect usb, and on computer type fastboot devices
You should get two lines of output. One device is listed something like 359G7HF6824
That means fastboot can see your device.
You need to download cwm recovery.img
Flash it to your phone by typing fastboot flash recovery recovery.img
...which will send recovery.img to 'recovery' partition on your phone.
Now use the volume keys to select recovery option, press power key to select.
In recovery flash a new ROM. Download one from development section if you need to.
If you find any of these steps difficult, please ask for more help.
However, all the help you need can be found by reading through the stickies in Q&A, General, and Development.
SebLemery said:
I looked at some tutorials about odin, but i cannot find all the appropriate files for my phone.
Would you be able to point me in the correct direction?
Click to expand...
Click to collapse
try to install the correct drivers: http://forum.xda-developers.com/showthread.php?t=1901617
and follow this thread (fastboot is better than ODIN!): http://forum.xda-developers.com/showthread.php?t=1572307
hit thanks and ask for help if u need
Cascabreu said:
try to install the correct drivers: http://forum.xda-developers.com/showthread.php?t=1901617
and follow this thread (fastboot is better than ODIN!): http://forum.xda-developers.com/showthread.php?t=1572307
hit thanks and ask for help if u need
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=10000936
Found this one in general sticky rollup too.
Cascabreu said:
try to install the correct drivers: http://forum.xda-developers.com/showthread.php?t=1901617
and follow this thread (fastboot is better than ODIN!): http://forum.xda-developers.com/showthread.php?t=1572307
hit thanks and ask for help if u need
Click to expand...
Click to collapse
I tried to use fastboot, but the pc is not seeing the device when in bootloader. ("fastboot devices" returns nothing)
i tried to install the drivers, but its a bunch of .dll files, what am i suppose to do with that..
i am really sorry if its noob, but i am noob.
SebLemery said:
I tried to use fastboot, but the pc is not seeing the device when in bootloader. ("fastboot devices" returns nothing)
i tried to install the drivers, but its a bunch of .dll files, what am i suppose to do with that..
i am really sorry if its noob, but i am noob.
Click to expand...
Click to collapse
Install the PDANet Android drivers, this usually works well.
http://junefabrics.com/android/
Then use fastboot to flash a recovery as bedalus wrote.
SebLemery said:
I tried to use fastboot, but the pc is not seeing the device when in bootloader. ("fastboot devices" returns nothing)
i tried to install the drivers, but its a bunch of .dll files, what am i suppose to do with that..
i am really sorry if its noob, but i am noob.
Click to expand...
Click to collapse
check the link i gave u, there is step by step images and some tips to better understand.
(im running windows 8 but its the same as 7)
Cascabreu said:
check the link i gave u, there is step by step images and some tips to better understand.
(im running windows 8 but its the same as 7)
Click to expand...
Click to collapse
i did, and it still failed, im running XP.
SebLemery said:
i did, and it still failed, im running XP.
Click to expand...
Click to collapse
the installation failed or fatsboot still doesnt recognize?
polobunny said:
Install the PDANet Android drivers, this usually works well.
Then use fastboot to flash a recovery as bedalus wrote.
Click to expand...
Click to collapse
This will only install if the phone is in debugging mode...
i cannot install PdaNET.
SebLemery said:
This will only install if the phone is in debugging mode...
i cannot install PdaNET.
Click to expand...
Click to collapse
i think ur are not installing the drivers well... give me ur skype name
Cascabreu said:
i think ur are not installing the drivers well... give me ur skype name
Click to expand...
Click to collapse
I do not use Skype.
SebLemery said:
I do not use Skype.
Click to expand...
Click to collapse
....
so i dont know how to show u... i think u are just installing the drivers the wrong way.
put your phone in fastboot mode (power off, vol+ and power), plug it in, dievice manager, right click on Android 1.0, update drivers, navigate to teh folder i gave u in the link, let me pick, have disk and navigate to the folder again select open and chose the first one option and install it.
did you did that?
Cascabreu said:
....
so i dont know how to show u... i think u are just installing the drivers the wrong way.
put your phone in fastboot mode (power off, vol+ and power), plug it in, dievice manager, right click on Android 1.0, update drivers, navigate to teh folder i gave u in the link, let me pick, have disk and navigate to the folder again select open and chose the first one option and install it.
did you did that?
Click to expand...
Click to collapse
i think i did yes, but look at what is missing... puu.sh/1lyEo (screenshot without the http)
I do use TeamViewer if you could show me.
SebLemery said:
i think i did yes, but look at what is missing... puu.sh/1lyEo (screenshot without the http)
I do use TeamViewer if you could show me.
Click to expand...
Click to collapse
u are doing it right, now use the drivers i gave and not the pda net (they never worked for me)
in my drivers u will find the fastboot, adb and bootloader, just install one off them
Cascabreu said:
u are doing it right, now use the drivers i gave and not the pda net (they never worked for me)
in my drivers u will find the fastboot, adb and bootloader, just install one off them
Click to expand...
Click to collapse
you have so many files there i am not sure what to get, and i am not finding the EXACT file its asking for....
could you help me with teamviewer? i learn a lot better like this? here is my TeamViewer ID: 967 077 759 i will give you the pass in PM if u say yes.
SebLemery said:
you have so many files there i am not sure what to get, and i am not finding the EXACT file its asking for....
could you help me with teamviewer? i learn a lot better like this? here is my TeamViewer ID: 967 077 759 i will give you the pass in PM if u say yes.
Click to expand...
Click to collapse
give me 3 min to install teamviewer
send the PM to me
UP AND RUNNING, waiting the password
Cascabreu said:
give me 3 min to install teamviewer
send the PM to me
UP AND RUNNING, waiting the password
Click to expand...
Click to collapse
I just want to say Thanks to Cascabreu for helping me fix it.
I have very bad problem with my phone. I wanted to install the cm 11 and its gapps, the cm I was able to install the gapps but it gave me the error status7. I read that to solve this problem I had to update the CWM. I installed from the recovery 6.0.0.4, and since recovery from I told him to do the reboot, you aren't more turned on. I have a phone that will not turn on and I can not do anything. Is there a way to completely reset the phone using only the pc from 0? Sorry for my bad english, i'm italian.
Ragnarox97 said:
I have very bad problem with my phone. I wanted to install the cm 11 and its gapps, the cm I was able to install the gapps but it gave me the error status7. I read that to solve this problem I had to update the CWM. I installed from the recovery 6.0.0.4, and since recovery from I told him to do the reboot, you aren't more turned on. I have a phone that will not turn on and I can not do anything. Is there a way to completely reset the phone using only the pc from 0? Sorry for my bad english, i'm italian.
Click to expand...
Click to collapse
p.s. i've also a nandroid backup if it be to help
Ragnarox97 said:
p.s. i've also a nandroid backup if it be to help
Click to expand...
Click to collapse
do you have access to the bootloader?
rzr86 said:
do you have access to the bootloader?
Click to expand...
Click to collapse
no, I have tried every combination of buttons, but will not start in any way
Ragnarox97 said:
no, I have tried every combination of buttons, but will not start in any way
Click to expand...
Click to collapse
how did you try to update the recovery?
if you switch on the device normally what does it show you?
Ragnarox97 said:
no, I have tried every combination of buttons, but will not start in any way
Click to expand...
Click to collapse
Have you tried accessing bootloader like this? Take out battery, sim card and memory card and then put battery only in, plug in usb 2 to computer and the micro usb to phone and then you should see the orange light come on and this will indicate that the phone is connected then open adb through android sdk and type adb reboot bootloader and tell me if it works
rzr86 said:
how did you try to update the recovery?
if you switch on the device normally what does it show you?
Click to expand...
Click to collapse
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
NextGenGTR said:
Have you tried accessing bootloader like this? Take out battery, sim card and memory card and then put battery only in, plug in usb 2 to computer and the micro usb to phone and then you should see the orange light come on and this will indicate that the phone is connected then open adb through android sdk and type adb reboot bootloader and tell me if it works
Click to expand...
Click to collapse
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Ragnarox97 said:
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Click to expand...
Click to collapse
Cwm itself has problems with the htc sensation, why did you not install Twrp? If you are able to access the recovery have you tried flashing Twrp from there, not sure if you can but have a search.
---------- Post added at 11:44 PM ---------- Previous post was at 11:40 PM ----------
Ragnarox97 said:
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Click to expand...
Click to collapse
Install the drivers from here, not sure (im trying my hardest) http://htc.vi8.info/
take a look here too
http://forum.xda-developers.com/showthread.php?t=1522351
NextGenGTR said:
Cwm itself has problems with the htc sensation, why did you not install Twrp? If you are able to access the recovery have you tried flashing Twrp from there, not sure if you can but have a search.
---------- Post added at 11:44 PM ---------- Previous post was at 11:40 PM ----------
Install the drivers from here, not sure (im trying my hardest) http://htc.vi8.info/
Click to expand...
Click to collapse
I can not get into recovery, it does not do anything. The screen does not turn on in any way, and in any way the charge attack, the little light does not turn orange.
From the link you gave me, I have to download and install these: hTCDriver-4.2.0.001.exe?
rzr86 said:
take a look here too
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
Thanks for the link, execute this procedure with a friend of mine who understands more.
According to you, my situation is a recoverable or unrecoverable brick?
Ragnarox97 said:
Thanks for the link, execute this procedure with a friend of mine who understands more.
According to you, my situation is a recoverable or unrecoverable brick?
Click to expand...
Click to collapse
if unbricking project fails then the only thing i can tell you is to go for jtag
this is the last option
i am out of ideas since your device it doesn't react anything at all
rzr86 said:
if unbricking project fails then the only thing i can tell you is to go for jtag
this is the last option
i am out of ideas since your device it doesn't react anything at all
Click to expand...
Click to collapse
I'm sorry, I can not understand well the first three prerequisites unbrick project:
1) I downloaded the live CD of Linux that put at the end and it is an ISO file. I have to mount with Daemon Tools? And as for the automount disabled and without unity, are parameters that I decide to install?
2) Packages for devices that are at the end are divided into 32-bit and 64-bit. Are the bits of my operating system or the phone (if they have)?
excuse my ignorance.
3) What is RUU and where do I find the right one for my device?
Ragnarox97 said:
I'm sorry, I can not understand well the first three prerequisites unbrick project:
1) I downloaded the live CD of Linux that put at the end and it is an ISO file. I have to mount with Daemon Tools? And as for the automount disabled and without unity, are parameters that I decide to install?
2) Packages for devices that are at the end are divided into 32-bit and 64-bit. Are the bits of my operating system or the phone (if they have)?
excuse my ignorance.
3) What is RUU and where do I find the right one for my device?
Click to expand...
Click to collapse
1)i don't know mate probably you have to extract the contents of it
it would be better to ask it in the unbrick thread
2)for the oerating system
3)ruu is the official rom and restores everything back to stock(including stock recovery)
see here
http://forum.xda-developers.com/showthread.php?t=1672425
rzr86 said:
1)i don't know mate probably you have to extract the contents of it
it would be better to ask it in the unbrick thread
2)for the oerating system
3)ruu is the official rom and restores everything back to stock(including stock recovery)
see here
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I found these: http://htc.vi8.info/Sensation-XE/ which take the first or the third (I live in Italy)?
Ragnarox97 said:
I found these: http://htc.vi8.info/Sensation-XE/ which take the first or the third (I live in Italy)?
Click to expand...
Click to collapse
the point is does it match with your cid and region?(same firmware or higher)
rzr86 said:
the point is does it match with your cid and region?(same firmware or higher)
Click to expand...
Click to collapse
I think because it corresponds with the region is Europe, the cid not know what is.
In the manual it says to download the latest RUU for my device, then the second ones I've found I should be the third, 2 October 2012. But if there were others on that page are not there?
There are so many, I do not know where to go get:
http://htc.vi8.info/Stock-RUU/
http://shipped-roms.com/index.php?category=android&model=Pyramid
http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/
http://www.androidruu.com/index.php?developer=Pyramid
Ragnarox97 said:
I think because it corresponds with the region is Europe, the cid not know what is.
In the manual it says to download the latest RUU for my device, then the second ones I've found I should be the third, 2 October 2012. But if there were others on that page are not there?
There are so many, I do not know where to go get:
http://htc.vi8.info/Stock-RUU/
http://shipped-roms.com/index.php?category=android&model=Pyramid
http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/
http://www.androidruu.com/index.php?developer=Pyramid
Click to expand...
Click to collapse
if your device is unbranded try the third one from here
http://htc.vi8.info/Sensation-XE/
rzr86 said:
if your device is unbranded try the third one from here
http://htc.vi8.info/Sensation-XE/
Click to expand...
Click to collapse
I downloaded it, and I wanted to ask, should not be a. Zip file? Instead it is a. Exe to install on my pc.
Ragnarox97 said:
I downloaded it, and I wanted to ask, should not be a. Zip file? Instead it is a. Exe to install on my pc.
Click to expand...
Click to collapse
yes you run the exe from pc
connect the device to pc in fastboot mode
edit: but you will be able to do that when you will gain access to the bootloader again
rzr86 said:
yes you run the exe from pc
connect the device to pc in fastboot mode
edit: but you will be able to do that when you will gain access to the bootloader again
Click to expand...
Click to collapse
There is a slight problem, the first command that I write on the terminal,. / Brickdetect.sh, I should recognize the device bricked. Instead it is not found. How so? When I attack my phone to pc, QHSUSB_DLOAD appears in the device list, but marks it as not specified.
I have a problem with my nexus 5, I try to install the recovery and it stays black screen does not enter the bootloader or anything, my pc recognizes it as android adb interface some help.
me to having same problem dont know what to do
pc not recognising my device
Follow this thread: https://forum.xda-developers.com/go...-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
I hope you have an efs backup somewhere if you don't keep trying..
also how did you try to install recovery? there is a multitude of ways and knowing what you did could help a lot.
Jo_Jo_2000 said:
Follow this thread: https://forum.xda-developers.com/go...-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
I hope you have an efs backup somewhere if you don't keep trying..
also how did you try to install recovery? there is a multitude of ways and knowing what you did could help a lot.
Click to expand...
Click to collapse
Hello thanks for your help I will try, I did the procedure with the tool nexus root toolkit I followed the steps my phone stayed so now it vibrates and reboots constantly my pc only recognizes it as mtp usb or android device.
soujirock said:
Hello thanks for your help I will try, I did the procedure with the tool nexus root toolkit I followed the steps my phone stayed so now it vibrates and reboots constantly my pc only recognizes it as mtp usb or android device.
Click to expand...
Click to collapse
Follow the thread and stop using toolkits since they might do obscure things and people cannot help you if you just say "i did it with the toolkit"
Jo_Jo_2000 said:
Follow the thread and stop using toolkits since they might do obscure things and people cannot help you if you just say "i did it with the toolkit"
Click to expand...
Click to collapse
Hello try to perform the steps but in the device manager I do not get any of that I only recognize the phone as android device.
soujirock said:
Hello try to perform the steps but in the device manager I do not get any of that I only recognize the phone as android device.
Click to expand...
Click to collapse
Thanks for your help, download one that said repair nexus 5 dead and now I get this I think I should do something more because now the pc recognizes me so if you could guide me I would thank you very much.
what happens when you try to open the mtp device?
if not try uninstalling all drivers with google..
you should always be able to reach the dload mode even if it's fully working as long as you follow the steps.
Jo_Jo_2000 said:
what happens when you try to open the mtp device?
if not try uninstalling all drivers with google..
you should always be able to reach the dload mode even if it's fully working as long as you follow the steps.
Click to expand...
Click to collapse
Hello what happens if it opens like a usb but on the screen of my cell you can not see anything even I recognize it in fastboot mode but on the screen I see nothing.
How can i get into dload mode
I try to flash it with the method you gave me but I get a message from device was not found in dload mode trying flash programmer.
maybe your screen is just broken?
also citing the thread linked: "If you dont see Qualcomm HS-USB QDLoader 9008 click on the CLICK TO SHOW CONTENT button bellow, otherwise don't and follow the guide."
Jo_Jo_2000 said:
maybe your screen is just broken?
also citing the thread linked: "If you dont see Qualcomm HS-USB QDLoader 9008 click on the CLICK TO SHOW CONTENT button bellow, otherwise don't and follow the guide."
Click to expand...
Click to collapse
Hello my screen is not broken or anything I already recognized the pc driver qualcom 9008 and perform the procedure of the post now my cell recognizes the pc as nexus 5 in usb mode but I do not have the system.
soujirock said:
but I do not have the system.
Click to expand...
Click to collapse
Aka no reaction or no fastboot or a missing partition?
is recovery working?
is bootloader working?
what has appeared on your screen to show you that it isnt broken?
Jo_Jo_2000 said:
Aka no reaction or no fastboot or a missing partition?
is recovery working?
is bootloader working?
what has appeared on your screen to show you that it isnt broken?
Click to expand...
Click to collapse
Hello, it seems that the fastboot mode works because in the pc it recognizes me as android device and I download a program that is called dead nexus 5.bat and this recognizes me and writes the system and performs other operations more but still nothing appears I do not know if the system can be flashed by this method.
i try with this method https://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701 but nothing
can you execute fastboot commands?
what does that script tell you, where is it from?
Please stop using toolkits, they perform obscure unpredictable things.
Also what makes you so certain your screen isn't broken given that everything works except the screen?
Jo_Jo_2000 said:
can you execute fastboot commands?
what does that script tell you, where is it from?
Please stop using toolkits, they perform obscure unpredictable things.
Also what makes you so certain your screen isn't broken given that everything works except the screen?
Click to expand...
Click to collapse
thanks man i solved my problem
Hello to all,
I apologize in advance for this message.
I mistakenly bricked my phone,
It was running WW-18.0840.2201.226 (Android 11).
I'm not sure if I'm going to be able to use it again, but I'm sure I'll be able to use it again in the future.
The recovery mode does not work anymore. It remains stuck on the logo.
Concerning the device manager :
In Bootloader, nothing is detected
When I test the recovery mode, it detects 'Android Composite ADB interface'.
However, the ADB commands do not work (Unauthaurized)
This is a call for help, I don't know which tutorial to look at to help me.
Do I need to get a Deep Flash Cable to restore the phone?
Excuse my English, I'm French ^^'
Hi, I'm not sure, but I think you will have to delete this POST... It doesn't respect the forum rules... That said, you can follow this link for your problem. https://forum.xda-developers.com/t/...to-unlock-bootloader-to-modify-country-cn-to- ww.4353865/não lido
Hi Rico,
If I have to delete the post I will do it, it's not a problem.
Do you think I can put this post in the topic you gave me?
I had come across it in my research but I didn't know if it needed a Deep Flash Cable
I didn't know that my problem was similar to the one in the post because I don't have a 9008 mode
B.
Balmyr said:
Hi Rico,
If I have to delete the post I will do it, it's not a problem.
Do you think I can put this post in the topic you gave me?
I had come across it in my research but I didn't know if it needed a Deep Flash Cable
I didn't know that my problem was similar to the one in the post because I don't have a 9008 mode
B.
Click to expand...
Click to collapse
There is nothing wrong with your post at all.
Do you have access to see and send Fastboot commands to the phone when on the bootloader screen? You need to get that right first and get your driver on your PC sorted. Forget ADB, that's not going to help you here.
Once you have sorted the above, doing a RAW flash following one of the guides you can find on this form with a rom version that matches your device should get you back on track.
At this stage you shouldn't need EDL or a deep flash cable before exploring the above option.
Good luck.
Hello Andrologic,
Thanks for your reply
I only have access to the Bootloader with 'Start / Restart Bootloader / Recovery Mode / Power Off'.
I bought a Deep Cable, this one detects me when I connect it to the pc, previously my other cables did not want it
So I can indeed use the Fastboot commands whereas before I couldn't
Andrologic said:
There is nothing wrong with your post at all.
Do you have access to see and send Fastboot commands to the phone when on the bootloader screen? You need to get that right first and get your driver on your PC sorted. Forget ADB, that's not going to help you here.
Once you have sorted the above, doing a RAW flash following one of the guides you can find on this form with a rom version that matches your device should get you back on track.
At this stage you shouldn't need EDL or a deep flash cable before exploring the above option.
Good luck.
Click to expand...
Click to collapse
Thank you very much Andrologic!
The phone works like magic again, I can't believe it T_T
When I should do the updates, should I reflash the phone?
It doesn't offer me any new ones even though I'm on Android 11
B.
Balmyr said:
Thank you very much Andrologic!
The phone works like magic again, I can't believe it T_T
When I should do the updates, should I reflash the phone?
It doesn't offer me any new ones even though I'm on Android 11
B.
Click to expand...
Click to collapse
Nice. No, I would suggest updating the conventional way, i.e download ROM for ASUS and let the device pick it up and flash it. If you have TWRP installed, you can flash from there too, but there is no need for that unless the first method is not working