I have very bad problem with my phone. I wanted to install the cm 11 and its gapps, the cm I was able to install the gapps but it gave me the error status7. I read that to solve this problem I had to update the CWM. I installed from the recovery 6.0.0.4, and since recovery from I told him to do the reboot, you aren't more turned on. I have a phone that will not turn on and I can not do anything. Is there a way to completely reset the phone using only the pc from 0? Sorry for my bad english, i'm italian.
Ragnarox97 said:
I have very bad problem with my phone. I wanted to install the cm 11 and its gapps, the cm I was able to install the gapps but it gave me the error status7. I read that to solve this problem I had to update the CWM. I installed from the recovery 6.0.0.4, and since recovery from I told him to do the reboot, you aren't more turned on. I have a phone that will not turn on and I can not do anything. Is there a way to completely reset the phone using only the pc from 0? Sorry for my bad english, i'm italian.
Click to expand...
Click to collapse
p.s. i've also a nandroid backup if it be to help
Ragnarox97 said:
p.s. i've also a nandroid backup if it be to help
Click to expand...
Click to collapse
do you have access to the bootloader?
rzr86 said:
do you have access to the bootloader?
Click to expand...
Click to collapse
no, I have tried every combination of buttons, but will not start in any way
Ragnarox97 said:
no, I have tried every combination of buttons, but will not start in any way
Click to expand...
Click to collapse
how did you try to update the recovery?
if you switch on the device normally what does it show you?
Ragnarox97 said:
no, I have tried every combination of buttons, but will not start in any way
Click to expand...
Click to collapse
Have you tried accessing bootloader like this? Take out battery, sim card and memory card and then put battery only in, plug in usb 2 to computer and the micro usb to phone and then you should see the orange light come on and this will indicate that the phone is connected then open adb through android sdk and type adb reboot bootloader and tell me if it works
rzr86 said:
how did you try to update the recovery?
if you switch on the device normally what does it show you?
Click to expand...
Click to collapse
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
NextGenGTR said:
Have you tried accessing bootloader like this? Take out battery, sim card and memory card and then put battery only in, plug in usb 2 to computer and the micro usb to phone and then you should see the orange light come on and this will indicate that the phone is connected then open adb through android sdk and type adb reboot bootloader and tell me if it works
Click to expand...
Click to collapse
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Ragnarox97 said:
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Click to expand...
Click to collapse
Cwm itself has problems with the htc sensation, why did you not install Twrp? If you are able to access the recovery have you tried flashing Twrp from there, not sure if you can but have a search.
---------- Post added at 11:44 PM ---------- Previous post was at 11:40 PM ----------
Ragnarox97 said:
I've updated the recovery, by simply downloading the package. Zip from SD card and installing it from recovery. If I press the power button nothing happens, the screen remains black and does not even have a little light.
I tried as you said yourself, but when it is charging (or attached to the PC, or to a plug) the orange LED is not lit. Is not lit, the only answer I got was that the computer told me "driver installation failed".
Click to expand...
Click to collapse
Install the drivers from here, not sure (im trying my hardest) http://htc.vi8.info/
take a look here too
http://forum.xda-developers.com/showthread.php?t=1522351
NextGenGTR said:
Cwm itself has problems with the htc sensation, why did you not install Twrp? If you are able to access the recovery have you tried flashing Twrp from there, not sure if you can but have a search.
---------- Post added at 11:44 PM ---------- Previous post was at 11:40 PM ----------
Install the drivers from here, not sure (im trying my hardest) http://htc.vi8.info/
Click to expand...
Click to collapse
I can not get into recovery, it does not do anything. The screen does not turn on in any way, and in any way the charge attack, the little light does not turn orange.
From the link you gave me, I have to download and install these: hTCDriver-4.2.0.001.exe?
rzr86 said:
take a look here too
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
Thanks for the link, execute this procedure with a friend of mine who understands more.
According to you, my situation is a recoverable or unrecoverable brick?
Ragnarox97 said:
Thanks for the link, execute this procedure with a friend of mine who understands more.
According to you, my situation is a recoverable or unrecoverable brick?
Click to expand...
Click to collapse
if unbricking project fails then the only thing i can tell you is to go for jtag
this is the last option
i am out of ideas since your device it doesn't react anything at all
rzr86 said:
if unbricking project fails then the only thing i can tell you is to go for jtag
this is the last option
i am out of ideas since your device it doesn't react anything at all
Click to expand...
Click to collapse
I'm sorry, I can not understand well the first three prerequisites unbrick project:
1) I downloaded the live CD of Linux that put at the end and it is an ISO file. I have to mount with Daemon Tools? And as for the automount disabled and without unity, are parameters that I decide to install?
2) Packages for devices that are at the end are divided into 32-bit and 64-bit. Are the bits of my operating system or the phone (if they have)?
excuse my ignorance.
3) What is RUU and where do I find the right one for my device?
Ragnarox97 said:
I'm sorry, I can not understand well the first three prerequisites unbrick project:
1) I downloaded the live CD of Linux that put at the end and it is an ISO file. I have to mount with Daemon Tools? And as for the automount disabled and without unity, are parameters that I decide to install?
2) Packages for devices that are at the end are divided into 32-bit and 64-bit. Are the bits of my operating system or the phone (if they have)?
excuse my ignorance.
3) What is RUU and where do I find the right one for my device?
Click to expand...
Click to collapse
1)i don't know mate probably you have to extract the contents of it
it would be better to ask it in the unbrick thread
2)for the oerating system
3)ruu is the official rom and restores everything back to stock(including stock recovery)
see here
http://forum.xda-developers.com/showthread.php?t=1672425
rzr86 said:
1)i don't know mate probably you have to extract the contents of it
it would be better to ask it in the unbrick thread
2)for the oerating system
3)ruu is the official rom and restores everything back to stock(including stock recovery)
see here
http://forum.xda-developers.com/showthread.php?t=1672425
Click to expand...
Click to collapse
I found these: http://htc.vi8.info/Sensation-XE/ which take the first or the third (I live in Italy)?
Ragnarox97 said:
I found these: http://htc.vi8.info/Sensation-XE/ which take the first or the third (I live in Italy)?
Click to expand...
Click to collapse
the point is does it match with your cid and region?(same firmware or higher)
rzr86 said:
the point is does it match with your cid and region?(same firmware or higher)
Click to expand...
Click to collapse
I think because it corresponds with the region is Europe, the cid not know what is.
In the manual it says to download the latest RUU for my device, then the second ones I've found I should be the third, 2 October 2012. But if there were others on that page are not there?
There are so many, I do not know where to go get:
http://htc.vi8.info/Stock-RUU/
http://shipped-roms.com/index.php?category=android&model=Pyramid
http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/
http://www.androidruu.com/index.php?developer=Pyramid
Ragnarox97 said:
I think because it corresponds with the region is Europe, the cid not know what is.
In the manual it says to download the latest RUU for my device, then the second ones I've found I should be the third, 2 October 2012. But if there were others on that page are not there?
There are so many, I do not know where to go get:
http://htc.vi8.info/Stock-RUU/
http://shipped-roms.com/index.php?category=android&model=Pyramid
http://www.persianhtc.net/index.php?dir=Sensation(Pyramid)/rom/original/EXE/
http://www.androidruu.com/index.php?developer=Pyramid
Click to expand...
Click to collapse
if your device is unbranded try the third one from here
http://htc.vi8.info/Sensation-XE/
rzr86 said:
if your device is unbranded try the third one from here
http://htc.vi8.info/Sensation-XE/
Click to expand...
Click to collapse
I downloaded it, and I wanted to ask, should not be a. Zip file? Instead it is a. Exe to install on my pc.
Ragnarox97 said:
I downloaded it, and I wanted to ask, should not be a. Zip file? Instead it is a. Exe to install on my pc.
Click to expand...
Click to collapse
yes you run the exe from pc
connect the device to pc in fastboot mode
edit: but you will be able to do that when you will gain access to the bootloader again
rzr86 said:
yes you run the exe from pc
connect the device to pc in fastboot mode
edit: but you will be able to do that when you will gain access to the bootloader again
Click to expand...
Click to collapse
There is a slight problem, the first command that I write on the terminal,. / Brickdetect.sh, I should recognize the device bricked. Instead it is not found. How so? When I attack my phone to pc, QHSUSB_DLOAD appears in the device list, but marks it as not specified.
Related
Hello guys, i am new here, yes its my first post, yes i have been posting on forums in the past, and yes i want to cry.
I just got this brand new nexus s from Videotron a couples of months back, someone told me to look for Cyanogenmod, i did, i installed it, with superuser rooted/unlocked. loved it, untill recently i rebooted the device due to battery outage, and it was stuck to the google logo, then i opened clockworkmod and did a restore, it worked!
Then, last week, an update was pushed to the phone about jelly beans, (4.1.1), i clicked INSTALL NOW, i was at home, plugged in.
The install failed (Android logo on his back with red triangle warning) i waited 2 hours, it was still there, i had to remove the battery.
Now, Clockworkmod is not starting. (Its the default bootloader (as usual) and the next page (in the RECOVERY option) its the default "Android system recovery <3a>" with those 4 options
-reboot system now
-apply update from /sdcard
-wipe data/factory reset
-wipe cache partition
...
i did them all, tried everything its still not booting.
I tried everything i could find on all the forums, fastboot, adb nvflash... but. when i plug in my device in the pc i don't think its seen by the maching (unless i click the "Turn on USB Storage) BUT I CANT CLICK IT :'(
Model # is GT-i9020T
I really need a pro to help me out, and i promise to give you compensation if you can fix it, via paypal.
I am on facebook daily, on IRC too. msn too,
I don't care if we manage to install ice cream sandwich, jellybean or even freaking BBq peanuts..
I just need a working "facebook machine"
Thank you and ill be looking at this post every hour.
Use odin?
Sent from my Nexus S using xda premium
al_madd said:
Use odin?
Click to expand...
Click to collapse
I looked at some tutorials about odin, but i cannot find all the appropriate files for my phone.
Would you be able to point me in the correct direction?
Free advice : you need to install fastboot on your computer.
You can fix this by holding volume up, and then hold power at the same time until you see the bootloader menu.
Then, connect usb, and on computer type fastboot devices
You should get two lines of output. One device is listed something like 359G7HF6824
That means fastboot can see your device.
You need to download cwm recovery.img
Flash it to your phone by typing fastboot flash recovery recovery.img
...which will send recovery.img to 'recovery' partition on your phone.
Now use the volume keys to select recovery option, press power key to select.
In recovery flash a new ROM. Download one from development section if you need to.
If you find any of these steps difficult, please ask for more help.
However, all the help you need can be found by reading through the stickies in Q&A, General, and Development.
SebLemery said:
I looked at some tutorials about odin, but i cannot find all the appropriate files for my phone.
Would you be able to point me in the correct direction?
Click to expand...
Click to collapse
try to install the correct drivers: http://forum.xda-developers.com/showthread.php?t=1901617
and follow this thread (fastboot is better than ODIN!): http://forum.xda-developers.com/showthread.php?t=1572307
hit thanks and ask for help if u need
Cascabreu said:
try to install the correct drivers: http://forum.xda-developers.com/showthread.php?t=1901617
and follow this thread (fastboot is better than ODIN!): http://forum.xda-developers.com/showthread.php?t=1572307
hit thanks and ask for help if u need
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=10000936
Found this one in general sticky rollup too.
Cascabreu said:
try to install the correct drivers: http://forum.xda-developers.com/showthread.php?t=1901617
and follow this thread (fastboot is better than ODIN!): http://forum.xda-developers.com/showthread.php?t=1572307
hit thanks and ask for help if u need
Click to expand...
Click to collapse
I tried to use fastboot, but the pc is not seeing the device when in bootloader. ("fastboot devices" returns nothing)
i tried to install the drivers, but its a bunch of .dll files, what am i suppose to do with that..
i am really sorry if its noob, but i am noob.
SebLemery said:
I tried to use fastboot, but the pc is not seeing the device when in bootloader. ("fastboot devices" returns nothing)
i tried to install the drivers, but its a bunch of .dll files, what am i suppose to do with that..
i am really sorry if its noob, but i am noob.
Click to expand...
Click to collapse
Install the PDANet Android drivers, this usually works well.
http://junefabrics.com/android/
Then use fastboot to flash a recovery as bedalus wrote.
SebLemery said:
I tried to use fastboot, but the pc is not seeing the device when in bootloader. ("fastboot devices" returns nothing)
i tried to install the drivers, but its a bunch of .dll files, what am i suppose to do with that..
i am really sorry if its noob, but i am noob.
Click to expand...
Click to collapse
check the link i gave u, there is step by step images and some tips to better understand.
(im running windows 8 but its the same as 7)
Cascabreu said:
check the link i gave u, there is step by step images and some tips to better understand.
(im running windows 8 but its the same as 7)
Click to expand...
Click to collapse
i did, and it still failed, im running XP.
SebLemery said:
i did, and it still failed, im running XP.
Click to expand...
Click to collapse
the installation failed or fatsboot still doesnt recognize?
polobunny said:
Install the PDANet Android drivers, this usually works well.
Then use fastboot to flash a recovery as bedalus wrote.
Click to expand...
Click to collapse
This will only install if the phone is in debugging mode...
i cannot install PdaNET.
SebLemery said:
This will only install if the phone is in debugging mode...
i cannot install PdaNET.
Click to expand...
Click to collapse
i think ur are not installing the drivers well... give me ur skype name
Cascabreu said:
i think ur are not installing the drivers well... give me ur skype name
Click to expand...
Click to collapse
I do not use Skype.
SebLemery said:
I do not use Skype.
Click to expand...
Click to collapse
....
so i dont know how to show u... i think u are just installing the drivers the wrong way.
put your phone in fastboot mode (power off, vol+ and power), plug it in, dievice manager, right click on Android 1.0, update drivers, navigate to teh folder i gave u in the link, let me pick, have disk and navigate to the folder again select open and chose the first one option and install it.
did you did that?
Cascabreu said:
....
so i dont know how to show u... i think u are just installing the drivers the wrong way.
put your phone in fastboot mode (power off, vol+ and power), plug it in, dievice manager, right click on Android 1.0, update drivers, navigate to teh folder i gave u in the link, let me pick, have disk and navigate to the folder again select open and chose the first one option and install it.
did you did that?
Click to expand...
Click to collapse
i think i did yes, but look at what is missing... puu.sh/1lyEo (screenshot without the http)
I do use TeamViewer if you could show me.
SebLemery said:
i think i did yes, but look at what is missing... puu.sh/1lyEo (screenshot without the http)
I do use TeamViewer if you could show me.
Click to expand...
Click to collapse
u are doing it right, now use the drivers i gave and not the pda net (they never worked for me)
in my drivers u will find the fastboot, adb and bootloader, just install one off them
Cascabreu said:
u are doing it right, now use the drivers i gave and not the pda net (they never worked for me)
in my drivers u will find the fastboot, adb and bootloader, just install one off them
Click to expand...
Click to collapse
you have so many files there i am not sure what to get, and i am not finding the EXACT file its asking for....
could you help me with teamviewer? i learn a lot better like this? here is my TeamViewer ID: 967 077 759 i will give you the pass in PM if u say yes.
SebLemery said:
you have so many files there i am not sure what to get, and i am not finding the EXACT file its asking for....
could you help me with teamviewer? i learn a lot better like this? here is my TeamViewer ID: 967 077 759 i will give you the pass in PM if u say yes.
Click to expand...
Click to collapse
give me 3 min to install teamviewer
send the PM to me
UP AND RUNNING, waiting the password
Cascabreu said:
give me 3 min to install teamviewer
send the PM to me
UP AND RUNNING, waiting the password
Click to expand...
Click to collapse
I just want to say Thanks to Cascabreu for helping me fix it.
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
mattsd said:
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
Click to expand...
Click to collapse
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
malybru said:
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
Click to expand...
Click to collapse
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
mattsd said:
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
Click to expand...
Click to collapse
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
malybru said:
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
Click to expand...
Click to collapse
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
mattsd said:
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
Click to expand...
Click to collapse
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
rzr86 said:
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
Click to expand...
Click to collapse
LEGEND!!
Thanks
mattsd said:
LEGEND!!
Thanks
Click to expand...
Click to collapse
no problem mate
rzr86 said:
no problem mate
Click to expand...
Click to collapse
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
mattsd said:
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
Click to expand...
Click to collapse
Hi,
Check my signature.
#27
Make sure you are not using usb 3.0 slots or hubs.
Try slots at the front and back.
Use good cables.
Hello,
I followed Hasoon's all-in-one root toolkit and flashed the included TWRP 2.5.0.0 onto my AT&T HTC One X. Now I cannot do anything, whatever I do, it tells me "Unable to mount /cache". Could you please help me? I can't mount the sdcard to the computer either, so I am sort of stuck.
Thanks!
Simone
simsale said:
Hello,
I followed Hasoon's all-in-one root toolkit and flashed the included TWRP 2.5.0.0 onto my AT&T HTC One X. Now I cannot do anything, whatever I do, it tells me "Unable to mount /cache". Could you please help me? I can't mount the sdcard to the computer either, so I am sort of stuck.
Thanks!
Simone
Click to expand...
Click to collapse
Can you format the SD card in TWRP?
exad said:
Can you format the SD card in TWRP?
Click to expand...
Click to collapse
I was able to wipe it. However, it still gave all these same unable to mount /cache error messages. The data is gone though.
When I connect the mounted device to the computer it still doesn't recognize it.
Thanks!
Simone
simsale said:
I was able to wipe it. However, it still gave all these same unable to mount /cache error messages. The data is gone though.
When I connect the mounted device to the computer it still doesn't recognize it.
Thanks!
Simone
Click to expand...
Click to collapse
Does the PC not recognize that anything is connected or does it detect that its plugged in but can't find the driver?
What rom is currently installed on the phone?
exad said:
Does the PC not recognize that anything is connected or does it detect that its plugged in but can't find the driver?
What rom is currently installed on the phone?
Click to expand...
Click to collapse
Currently I think it recognizes the phone as a media device (or similar, I forgot the name), not as a disk drive. I am on a Mac, and I have Android File Transfer installed, which then tells me that the device cannot be opened. On Windows it couldn't be opened either although it talked about a driver issue. I currently only have a Mac, but from Monday I could work on a Windows machine again.
The ROM currently being installed is the original AT&T provided ROM.
Thanks so much!
Simone
simsale said:
Currently I think it recognizes the phone as a media device (or similar, I forgot the name), not as a disk drive. I am on a Mac, and I have Android File Transfer installed, which then tells me that the device cannot be opened. On Windows it couldn't be opened either although it talked about a driver issue. I currently only have a Mac, but from Monday I could work on a Windows machine again.
The ROM currently being installed is the original AT&T provided ROM.
Thanks so much!
Simone
Click to expand...
Click to collapse
What version? IS it already installed on your phone? I'm trying to find out if you require MTP drivers or not. Latest version of sense/stock Roms require MTP driver to access the SD card.
In any case I wouldn't suggest using any version of TWRP above 2.3.3.1
So, I would download twrp 2.3.3.1 and check the md5
then fastboot flash recovery recoveryfilename.img
fastboot erase cache
fastboot reboot-bootloader
select recovery from bootloader then try to mount sdcard with twrp.
exad said:
What version? IS it already installed on your phone? I'm trying to find out if you require MTP drivers or not. Latest version of sense/stock Roms require MTP driver to access the SD card.
In any case I wouldn't suggest using any version of TWRP above 2.3.3.1
So, I would download twrp 2.3.3.1 and check the md5
then fastboot flash recovery recoveryfilename.img
fastboot erase cache
fastboot reboot-bootloader
select recovery from bootloader then try to mount sdcard with twrp.
Click to expand...
Click to collapse
I see, this all sounds like I need to wait for a windows machine.
I am not sure what ROM version, unfortunately. I bought the phone in December from AT&T, and it all looks like it asks for MTP drivers. I will try this with a Windows machine and then get back to this post - thank you so very much for your help.
Simone
simsale said:
I see, this all sounds like I need to wait for a windows machine.
I am not sure what ROM version, unfortunately. I bought the phone in December from AT&T, and it all looks like it asks for MTP drivers. I will try this with a Windows machine and then get back to this post - thank you so very much for your help.
Simone
Click to expand...
Click to collapse
Yes, you would need mtp drivers for the latest software version. They are included with the latest HTC sync.
exad said:
Yes, you would need mtp drivers for the latest software version. They are included with the latest HTC sync.
Click to expand...
Click to collapse
Alright, I have tried this with the latest HTC Sync manager: the MTP Drivers however won't install. I have tried with the One X+ of my Dad (which is also brand new, so probably requires the newest version also), and it installs fine and appears as a media device in the explorer. Mine however does not do anything, and driver installation says it fails to install the driver. I have tried manually installing the drivers, however, it seems to have to do with the phone because when I disconnect it suddenly Windows 7 is able to install those drivers, and as mentioned before it also works with a functional phone.
Next week I will be back at work and I have a Windows 8 machine there. I don't have high hopes that it works there, but since there seems to be an MTP driver issue with Win7, maybe there's a chance.
Is there anything else I could do?
Thanks!
PS: don't use your vacation time to root your phone...haha.
simsale said:
Alright, I have tried this with the latest HTC Sync manager: the MTP Drivers however won't install. I have tried with the One X+ of my Dad (which is also brand new, so probably requires the newest version also), and it installs fine and appears as a media device in the explorer. Mine however does not do anything, and driver installation says it fails to install the driver. I have tried manually installing the drivers, however, it seems to have to do with the phone because when I disconnect it suddenly Windows 7 is able to install those drivers, and as mentioned before it also works with a functional phone.
Next week I will be back at work and I have a Windows 8 machine there. I don't have high hopes that it works there, but since there seems to be an MTP driver issue with Win7, maybe there's a chance.
Is there anything else I could do?
Thanks!
PS: don't use your vacation time to root your phone...haha.
Click to expand...
Click to collapse
OK, so on Windows 8 I am able to install the driver, and it does not fail like in Win7, but I still can't access the mounted storage. The message of the device is:
This device cannot start. (Code 10)
The process hosting the driver for this device has terminated.
Is there anything else I can do, or should I rather get a new phone?
simsale said:
Is there anything else I can do, or should I rather get a new phone?
Click to expand...
Click to collapse
Did you do all of what exad said in his earlier post (quoted below) already?
exad said:
So, I would download twrp 2.3.3.1 and check the md5
then fastboot flash recovery recoveryfilename.img
fastboot erase cache
fastboot reboot-bootloader
select recovery from bootloader then try to mount sdcard with twrp.
Click to expand...
Click to collapse
lauterm said:
Did you do all of what exad said in his earlier post (quoted below) already?
Click to expand...
Click to collapse
Yes, in fact, I cannot connect to the phone with this strange driver issue, which means none of the commands actually do anything.
simsale said:
Yes, in fact, I cannot connect to the phone with this strange driver issue, which means none of the commands actually do anything.
Click to expand...
Click to collapse
Are you rebooting to bootloader to do the fastboot commands? In bootloader it should say Fastboot in red. Then after a couple seconds that should change to Fastboot USB. I don't think fastboot needs the specific drivers to be on the PC like mounting the SD card requires.
lauterm said:
Are you rebooting to bootloader to do the fastboot commands? In bootloader it should say Fastboot in red. Then after a couple seconds that should change to Fastboot USB. I don't think fastboot needs the specific drivers to be on the PC like mounting the SD card requires.
Click to expand...
Click to collapse
Well, when I turn on the phone, all I get is the TWRP interface. Mounting from there doesn't do anything. I am not in fact in bootloader. Maybe I am doing something wrong here!!
simsale said:
Well, when I turn on the phone, all I get is the TWRP interface. Mounting from there doesn't do anything. I am not in fact in bootloader. Maybe I am doing something wrong here!!
Click to expand...
Click to collapse
You are definitely doing something wrong. fastboot commands only work within bootloader/fastboot and adb commands only work while the rom is loaded up or in sideload mode in TWRP. It's assumed you know this prior to rooting.
simsale said:
Well, when I turn on the phone, all I get is the TWRP interface. Mounting from there doesn't do anything. I am not in fact in bootloader. Maybe I am doing something wrong here!!
Click to expand...
Click to collapse
Turn off the phone. Then hold volume down and briefly press the power button. Don't let go of volume down until it gets to the boot loader screen. Wait for fast bot USB to display. Then you can try exad's fast boot commands.
Sent from my One X using xda app-developers app
lauterm said:
Turn off the phone. Then hold volume down and briefly press the power button. Don't let go of volume down until it gets to the boot loader screen. Wait for fast bot USB to display. Then you can try exad's fast boot commands.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Oh, thanks so much. I actually did know this from rooting my old phone - I guess I forgot.
It doesn't go into Fastboot USB though, stays at Fastboot. Is there another trick? Thanks so much!
use cwm
simsale said:
Oh, thanks so much. I actually did know this from rooting my old phone - I guess I forgot.
It doesn't go into Fastboot USB though, stays at Fastboot. Is there another trick? Thanks so much!
Click to expand...
Click to collapse
It should change to FASTBOOT USB if you are plugged into a computer. If you connected to the computer after you got to bootloader mode, you might have to press volume up or down to get it to switch to FASTBOOT USB Maybe this is the root of your problem. Have you tried multiple USB cables? Is there any crud in the micro-USB port on your phone? It's a little odd that the micro-USB port would break in a manner that charging would still work but not data connections, but I'm starting to wonder if that isn't the case.
lauterm said:
It should change to FASTBOOT USB if you are plugged into a computer. If you connected to the computer after you got to bootloader mode, you might have to press volume up or down to get it to switch to FASTBOOT USB Maybe this is the root of your problem. Have you tried multiple USB cables? Is there any crud in the micro-USB port on your phone? It's a little odd that the micro-USB port would break in a manner that charging would still work but not data connections, but I'm starting to wonder if that isn't the case.
Click to expand...
Click to collapse
OK, I managed to get into Fastboot USB and now have the SDcard mounted. I'll try flashing a new ROM now. Is this one you'd recommend?
http://forum.xda-developers.com/showthread.php?t=1868236&highlight=+rom+
Thanks so much!!
Simone
How to unlock Vodafone vfd300 any network any carrier?
Follow the instructions.
Download:
https://mega.nz/#F!MpM2QRYT!j8GtDwqyhU7TsunOZxadmg
Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6580_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only"
- Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
-Start recovery and wipe data and cache.
-Reboot system
- Finish !
-ENJOY!!!
Hi there Mercyless,
I tried your instructions step by step but I'm getting this error message when I load the scatter file:
Partition[frp] shoult NOT set "is_download" to true in scatter file
Please check
What can I do? Thanks.
Bogdanux said:
Hi there Mercyless,
I tried your instructions step by step but I'm getting this error message when I load the scatter file:
Partition[frp] shoult NOT set "is_download" to true in scatter file
Please check
What can I do? Thanks.
Click to expand...
Click to collapse
No problem my friend!
Just use this sp flashtool:
https://mega.nz/#F!0pU01Y4C!shO88mJ-svGJ8tni_5DmLA
:good:
Hi again,
I tried your version but I get the following error:
BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
Tried the general fixes of this error but no help. Also, I used the latest SP Flash Tool from the official website and another ROM and it worked (only without battery).
I'll try on a different computer with your downloads to see if I get the same result.
Bogdanux said:
Hi again,
I tried your version but I get the following error:
BROM ERROR : S_BROM_CMD_STARTCMD_FAIL (2005)
Tried the general fixes of this error but no help. Also, I used the latest SP Flash Tool from the official website and another ROM and it worked (only without battery).
I'll try on a different computer with your downloads to see if I get the same result.
Click to expand...
Click to collapse
This means that the device will try to turn it on, not start flash mode.
First, charge the battery.
Do not use the latest flashtoolt, use what i've shown, the older version!!
Reinstall the drivers, use another cable.
The firmware is working, I've used it many times! :good:
Feedback please...
Hi there,
I want to root also, can anyone give a feedback on theses procedures. Are they working?
Thanks
Scam
File won't even download, gets to 51% then stops, tried 3 times now
I'm trying to download the file. After using i will give feedback.
NoName4me82 said:
File won't even download, gets to 51% then stops, tried 3 times now
Click to expand...
Click to collapse
SCAM???
Do not talk stupid things!!
If you can not download a simple file, do not come here!
Downloading works, files are good!
Do not lie to others, ugly thing!
Usb debugging????
I flashed my vfd300 with the stock rom using spflash but i made a rookie mistake by not turning debugging on resulting in phone stuck at spinning circle, will this flash withouy debugging, or do you know any way i can enable it using adb or fastboot??
cheers
jonny5alen said:
I flashed my vfd300 with the stock rom using spflash but i made a rookie mistake by not turning debugging on resulting in phone stuck at spinning circle, will this flash withouy debugging, or do you know any way i can enable it using adb or fastboot??
cheers
Click to expand...
Click to collapse
The first departure is 15-20 minutes, just wait.
Waited much longer,
Mercyless said:
The first departure is 15-20 minutes, just wait.
Click to expand...
Click to collapse
I left it all night and it never got past the circle, ive just managed to flash again using a difarent rom so ill see if this one works,
im stiull waiting for your one to download, when its finidhed will it flash with out usb debugging enabled ?
Hello,my device is already rooted but it is network locked. If i flash this scatter file,will i lose root after flashing?
Trace.Oneil said:
Hello,my device is already rooted but it is network locked. If i flash this scatter file,will i lose root after flashing?
Click to expand...
Click to collapse
Hi Friend! Root will not be available.
jonny5alen said:
I left it all night and it never got past the circle, ive just managed to flash again using a difarent rom so ill see if this one works,
im stiull waiting for your one to download, when its finidhed will it flash with out usb debugging enabled ?
Click to expand...
Click to collapse
I'm Hungarian, I do not understand the question.
Please write more clearly.
Mercyless said:
Hi Friend! Root will not be available.
Click to expand...
Click to collapse
So if i flash this i will lose root?
Flashed it?
Hi merciless,
I finally managed to flash our rom just now but its still just stopping at a spinning circle, Any Ideas mate
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Mercyless said:
I'm Hungarian, I do not understand the question.
Please write more clearly.
Click to expand...
Click to collapse
Sorry,
what i meant was that i managed to flash a stock rom but it never actually booted up, it just gets to a spinning disc
but originally i never enabled usb debugging so i fear that is where the issue is do you know of anyway to enable usb-debugging via adb\fastboot?
jonny5alen said:
Hi merciless,
I finally managed to flash our rom just now but its still just stopping at a spinning circle, Any Ideas mate
---------- Post added at 04:20 PM ---------- Previous post was at 04:17 PM ----------
Sorry,
what i meant was that i managed to flash a stock rom but it never actually booted up, it just gets to a spinning disc
but originally i never enabled usb debugging so i fear that is where the issue is do you know of anyway to enable usb-debugging via adb\fastboot?
Click to expand...
Click to collapse
Unfortunately I do not know how to work this way with adb / fastboot.
I did not have to use it yet.
If you do not start the system to do a hard reset, it will surely be good afterwards.
After the hard reset, the first start is 15-20 minutes, just wait patiently.
I will also make a video about the installation, I hope it will help.
Trace.Oneil said:
So if i flash this i will lose root?
Click to expand...
Click to collapse
Yes, she needs to re-root.
vfd 300
I found another ROM - [MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53
and after flashing it with this one, everything appeared fine. The language was Vietnamese or somemthing and the region from Australia & East Asia, but still I managed to change it, root the phone and setup my stuff... with only one big problem, when I insert my SIM card, it asks for a network lock [NP] and says I have 99 attempts left.
---------- Post added at 07:32 AM ---------- Previous post was at 07:23 AM ----------
i have tried but my phone keep disconecting after 2 second and procces fails, but when am using this ROM --MT6580_S00_EMMC_MRA58K__6.0_VFD 300_Vodafone_356774071726533_08_19_2016_09_02_53 it is flashing well but sim is locked .......i have tried bettery trick the phone dont disconect but nothing is happening.
HELP ME PLEASE!!!!!!!!!
Hi guys,
I have this phone (european dual sim version) and tried to update it via Newflasher. Now the phone doesnt start anymore, it is stuck in bootloop, just says sony and then it says that my phone is corrupt and it will not boot. I dont have enough battery to repair it via Companion. Is there any way to avoid going to the Sony Service?
I should mention that I tried to flash firmware 58.0.A.22.21 Europe Customized EEA. What should I flash to get it to start? Any idea is welcome.
Thank you.
leoking3 said:
Hi guys,
I have this phone (european dual sim version) and tried to update it via Newflasher. Now the phone doesnt start anymore, it is stuck in bootloop, just says sony and then it says that my phone is corrupt and it will not boot. I dont have enough battery to repair it via Companion. Is there any way to avoid going to the Sony Service?
I should mention that I tried to flash firmware 58.0.A.22.21 Europe Customized EEA. What should I flash to get it to start? Any idea is welcome.
Thank you.
Click to expand...
Click to collapse
Can you post a log of what newflasher says when you try to flash the EU rom?
TripodKnight said:
Can you post a log of what newflasher says when you try to flash the EU rom?
Click to expand...
Click to collapse
It flashes, finishes, phone is disconnected, then it doesnt start anymore. Please let me know what log are you talking about and how to get it?
leoking3 said:
It flashes, finishes, phone is disconnected, then it doesnt start anymore. Please let me know what log are you talking about and how to get it?
Click to expand...
Click to collapse
Copy all of the newflasher text into a notepad file and post it here so we can review it.
TripodKnight said:
Copy all of the newflasher text into a notepad file and post it here so we can review it.
Click to expand...
Click to collapse
Oh, ok , sure, in 10 minutes.
leoking3 said:
Oh, ok , sure, in 10 minutes.
Click to expand...
Click to collapse
Please see it attached
leoking3 said:
Please see it attached
Click to expand...
Click to collapse
Do you have ADB installed?
Yes I do
leoking3 said:
Yes I do
Click to expand...
Click to collapse
Try launching your phone into fastboot (plug in while holding volume up, wait for blue light)
Once in fastboot, try setting your active partition to partition a with the command below:
fastboot --set-active=a
The restart your phone and see if it loads.
TripodKnight said:
Try launching your phone into fastboot (plug in while holding volume up, wait for blue light)
Once in fastboot, try setting your active partition to partition a with the command below:
fastboot --set-active=a
The restart your phone and see if it loads.
Click to expand...
Click to collapse
it says: unknown option –set-active=a
leoking3 said:
it says: unknown option –set-active=a
Click to expand...
Click to collapse
This website shows the commands to use:
https://www.androidexplained.com/change-active-partition-slot/
Code:
fastboot --set-active=a
TripodKnight said:
This website shows the commands to use:
https://www.androidexplained.com/change-active-partition-slot/
Code:
fastboot --set-active=a
Click to expand...
Click to collapse
Thank you for being patient, unfortunately the device seems mega fu..ed. I dont know what could have happened sooo important that messed it up like this. I used the correct file,I followed the instructions... It goes to fastboot and it is recongnized by the PC, but the command doesnt work, it gives the response from my previous reply.. It seems that I am doomed to go to the service and that is it. Thank you very much man!
leoking3 said:
Thank you for being patient, unfortunately the device seems mega fu..ed. I dont know what could have happened sooo important that messed it up like this. I used the correct file,I followed the instructions... It goes to fastboot and it is recongnized by the PC, but the command doesnt work, it gives the response from my previous reply.. It seems that I am doomed to go to the service and that is it. Thank you very much man!
Click to expand...
Click to collapse
If your fastboot is not working properly then I agree. But I've never seen a fastboot get corrupted. Can you run any fastboot commands at all?
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
leoking3 said:
Thank you for being patient, unfortunately the device seems mega fu..ed. I dont know what could have happened sooo important that messed it up like this. I used the correct file,I followed the instructions... It goes to fastboot and it is recongnized by the PC, but the command doesnt work, it gives the response from my previous reply.. It seems that I am doomed to go to the service and that is it. Thank you very much man!
Click to expand...
Click to collapse
For your information, I have been dealing with a bootloop the last few days. I have now just tried a new USB cable with a new USB port (not the official Sony cable) and have fixed my issues. Perhaps you could give that a try as well.
TripodKnight said:
If your fastboot is not working properly then I agree. But I've never seen a fastboot get corrupted. Can you run any fastboot commands at all?
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
For your information, I have been dealing with a bootloop the last few days. I have now just tried a new USB cable with a new USB port (not the official Sony cable) and have fixed my issues. Perhaps you could give that a try as well.
Click to expand...
Click to collapse
I used the "fastboot devices" command and it worked, it showed me serial number of the phone. So it seems to be connected. But it doesnt want to change the boot partition. .... As for the cable, I first used a very old usb to usb c cable. Then I used one from my iqos charger. Because my laptop doesnt have a usb C port. So you really think the cable could f..k up things while flashing?? Should I try and find another one in the house maybe and try again?
leoking3 said:
I used the "fastboot devices" command and it worked, it showed me serial number of the phone. So it seems to be connected. But it doesnt want to change the boot partition. .... As for the cable, I first used a very old usb to usb c cable. Then I used one from my iqos charger. Because my laptop doesnt have a usb C port. So you really think the cable could f..k up things while flashing?? Should I try and find another one in the house maybe and try again?
Click to expand...
Click to collapse
Your ADB might be out of date and not have the A/B partition fastboot commands. Try updating through instructions here:
https://developer.android.com/studio/releases/platform-tools
I never thought a USB cable would be the issue either, but I tried a new USB port and quality cable and suddenly everything works fine.
Also confirm you're using newflasher to flash the correct firmware for your model. When I flashed the XQ-AS72 firmware on my XQ-AS52 I experienced bootloops like what you're experiencing.
If you still have issues, you can boot to recovery with these instructions and select "power off". You should be able to charge your phone to 80% to use the xperia companion app. https://www.mobilereset99.com/hard-reset-sony-xperia-1-ii/
TripodKnight said:
If your fastboot is not working properly then I agree. But I've never seen a fastboot get corrupted. Can you run any fastboot commands at all?
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
For your information, I have been dealing with a bootloop the last few days. I have now just tried a new USB cable with a new USB port (not the official Sony cable) and have fixed my issues. Perhaps you could give that a try as well.
Click to expand...
Click to collapse
TripodKnight said:
Your ADB might be out of date and not have the A/B partition fastboot commands. Try updating through instructions here:
https://developer.android.com/studio/releases/platform-tools
I never thought a USB cable would be the issue either, but I tried a new USB port and quality cable and suddenly everything works fine.
Also confirm you're using newflasher to flash the correct firmware for your model. When I flashed the XQ-AS72 firmware on my XQ-AS52 I experienced bootloops like what you're experiencing.
If you still have issues, you can boot to recovery with these instructions and select "power off". You should be able to charge your phone to 80% to use the xperia companion app. https://www.mobilereset99.com/hard-reset-sony-xperia-1-ii/
Click to expand...
Click to collapse
Yes, unfortunately is the correct firmware.
I.will try all these solutions, thank you very very much!
leoking3 said:
it says: unknown option –set-active=a
Click to expand...
Click to collapse
You were right, it was to old to know the command. Now it takes the command but says it is not allowed in lock state
leoking3 said:
You were right, it was to old to know the command. Now it takes the command but says it is not allowed in lock state
Click to expand...
Click to collapse
Give your phone a charge and give the Xperia companion app a try.
If you use the included charger and cable, it will charge faster than it drains even if you leave it in bootloop. But you can also try powering down using recovery options.
Let me know if that works.
TripodKnight said:
Give your phone a charge and give the Xperia companion app a try.
If you use the included charger and cable, it will charge faster than it drains even if you leave it in bootloop. But you can also try powering down using recovery options.
Let me know if that works.
Click to expand...
Click to collapse
The issues is that I cannot enter the Recovery and see the options. So you are sayng that even if when I plug it in it keeps saying my phone is corrupt, it still charges?
leoking3 said:
The issues is that I cannot enter the Recovery and see the options. So you are sayng that even if when I plug it in it keeps saying my phone is corrupt, it still charges?
Click to expand...
Click to collapse
It should charge. You should be able to hold volume down on boot (green light top corner, black screen will happen) and try an xperia companion app restore by following the repair options (select "My device is not detected by computer". It should be charging as it restores from your computer as well.