Related
Hi ! I have a problem with my Kaiser ! The screen is black, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays black ! Is there a way to make my kaiser working ? (Sorry for my english)
Remove battery and then press power button 30 seconds or more.
Worked for me.
Assface said:
Remove battery and then press power button 30 seconds or more.
Worked for me.
Click to expand...
Click to collapse
it doesnt work ! I think there is a problem with spl , because this problem appears after unsuccessful hard spl installing ! I don know how to fix this
IP13 said:
Hi ! I have a problem with my Kaiser ! The screen is blank, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays blank ! Is there a way to make my kaiser working ? (Sorry for my english)
Click to expand...
Click to collapse
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
krouth said:
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
Click to expand...
Click to collapse
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
IP13 said:
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
Click to expand...
Click to collapse
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
krouth said:
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
Click to expand...
Click to collapse
Active sync doesnt recognize my Kaiser!
IP13 said:
Active sync doesnt recognize my Kaiser!
Click to expand...
Click to collapse
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
krouth said:
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
Click to expand...
Click to collapse
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
krouth said:
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
Click to expand...
Click to collapse
I cant install this rom because it shows me an error : "ERROR [260] CONNECTION
The Update Utillity cannot connect your PDA Phone . Please check that your USB cradle/cable is connected properly between the PC and your PDA phone .
Chech the following :
1.The PDA Phone is connected to the USB cradle/cable.
2.The USB cradle/cable is connected to the PC "
I have allready checked the cable (it works with my other PDA)
delower10 said:
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
Click to expand...
Click to collapse
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
IP13 said:
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
Click to expand...
Click to collapse
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
krouth said:
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
Click to expand...
Click to collapse
Yes ! I also get the blank screen after following all this steps !
IP13 said:
Yes ! I also get the blank screen after following all this steps !
Click to expand...
Click to collapse
I am not sure.... I have done some searching and ran across this thread:
http://forum.xda-developers.com/showthread.php?t=423486
It has numerous posts about problems people have experienced flashing - maybe you might get some insight there - or at least post your question there where more people might be monitoring the thread. Good luck!
Please take your issue to the right place, better than open a new thread, I sugest
http://forum.xda-developers.com/showthread.php?t=433835
Your situation should be taken by the right guys, not just gessing if this or that might solve the situation, male a post there
Also have a look at the sticky on the top, try to get Dave Shaw help
THx I will try to ask there ....
Fanning the flames.
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
tyler51773 said:
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
Click to expand...
Click to collapse
Thx man , appreciate this !!
My htc one x is bricked (
Someone can help me...i am newbie and i trie many issue and problem persist...
I have 2 major problem....i can't mount my sdcard and when i tried ruu.. error 155 appears....
Sorry for my bad english
I pay 50$ for person can resolve my problem.....
There is my infos:
EVITA PVT SHIP S-ON RL
HBOOT-1.11.00000
RADIO-0.18AS.32.09.28L
OPENDSP-V28.1.0.32.0504
EMMC-BOOT
THANKS.
still need info what did you do to brick it ? im guessing you flash the wrong recovery
Did you relock your bootloader before RUU? And did you use the RUU that corresponds to your hboot?
i guess u did not flash a right recovery and did not flash back into htc's offical recovery before ruu
just try
boot to fastboot
flash the original recovery ( link : https://www.box.com/s/48a3962ztzy4gzapp28r )
lock bootloader using "fastboot oem relock bootloader"
ruu again
I don't think someone who doesnt know how they bricked their phone willl be able to do adb commands lol but like others said relock bootloader than ruu
Sounds like you factory reset in fastboot. For some reason it unnoints the sd card. I had this happen to me. To fix all I did was hook my phone up to the computer and when I went to the drive it was at it said it needed formated. Format it and you should be able to go back into recovery. Hope this helps.
Sent from my HTC One XL using xda premium
Please keep all question/help threads in the Q&A section only. Always search the forum before creating new threads.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Too little information.
What did you do to get to this state? Did you flash a ROM or recovery? Which one?
Did you relock the bootloader before running the RUU?
Hard Brick! htc one x - mac users
Hi folks ... seemed to have bricked my rooted htc one x after making the mistake of my life and flashing bindroid! phone is unlocked and rooted ... phone keeps on rebooting endlessly when connected to any charger (mac/wall). I believe the only way out is to use fastboot, anything else such as factory reset, going into cwm simply fails! now before all of u give me solutions using windows fastboot ... PLEASE give me specific fastboot instructions (step by step) on how to use fastboot on mac os x 10.8.2 cause I don't have windows ... detailed steps means exactly what to type when I launch terminal ... thank you all! have a good one.
galaxy_note_user said:
Hi folks ... seemed to have bricked my rooted htc one x after making the mistake of my life and flashing bindroid! phone is unlocked and rooted ... phone keeps on rebooting endlessly when connected to any charger (mac/wall). I believe the only way out is to use fastboot, anything else such as factory reset, going into cwm simply fails! now before all of u give me solutions using windows fastboot ... PLEASE give me specific fastboot instructions (step by step) on how to use fastboot on mac os x 10.8.2 cause I don't have windows ... detailed steps means exactly what to type when I launch terminal ... thank you all! have a good one.
Click to expand...
Click to collapse
Study this thread and come back:
http://forum.xda-developers.com/showthread.php?t=1754018
Flashing international roms can really screw these phones up, so you're going to need to do a full wipe.
Also, don't use CWM, which not supported for this phone and can cause problems. You need to push TWRP recovery in fastboot if you can get there. Once in, wipe everything, /system included. You should then be able to flash a useable rom.
htc one international - hard brick, tough luck ...
Thanks iElvis ... I downloaded the .zip file in the thread you sent me ... what next? I would like to go back to unrooted stock and let htc OTA updates take care of my phone from a to z. what are the steps please? what do i click on, type what in the terminal? etc ? appreciate your help! thanks again! which files to download, links? etc ... ?
galaxy_note_user said:
Thanks iElvis ... I downloaded the .zip file in the thread you sent me ... what next? I would like to go back to unrooted stock and let htc OTA updates take care of my phone from a to z. what are the steps please? what do i click on, type what in the terminal? etc ? appreciate your help! thanks again! which files to download, links? etc ... ?
Click to expand...
Click to collapse
If you want to be back to stock unrooted just run the Fastboot cmd fastboot OEM lock and then run ruu according to your devices software version in fb as well and you should be good to go.
still bricked htc one x ...
thanks again ... where is that file i should run called fastboot cmd oem .... ? all i have from the unzipped initial file I downloaded is a bunch of files, the .exe files are obviously useless to me ... i double clicked on fastboot terminal file and get a terminal window that says "process completed' without even typing anything ... and then what else? pls bear in mind that I have no clue how to do the things you are telling me to do ... ((
galaxy_note_user said:
thanks again ... where is that file i should run called fastboot cmd oem .... ? all i have from the unzipped initial file I downloaded is a bunch of files, the .exe files are obviously useless to me ... i double clicked on fastboot terminal file and get a terminal window that says "process completed' without even typing anything ... and then what else? pls bear in mind that I have no clue how to do the things you are telling me to do ... ((
Click to expand...
Click to collapse
Did you read that thread I linked? That's got all the instructions you should need.
shall I throw my htc away???
Hi ... sorry for the tardy reply but getting a bit frustrated with this htc (currently using SG3 and iphone 5) ... anyhow, I got to finally understand how to use fastboot and adb but don't know which files exactly to push to this unlocked bricked htc to return to stock? Can you pls provide me with the links to push the necessary files and which files to push first? thanks again ... have a wonderful weekend
No way out ... ? Bricked HTC One X ...
Hi again .... ok, I now know exactly how to use fastboot/adb commands to revive/unbrick my htc one x thanks to you! However, therein lies the biggest dilemma of all ... fastboot wont write to the phone only because it says the battery is too low on my phone which it is ... if I plug my phone into A/C power, phone keeps on rebooting endlessly with 0.5 sec charging (red light on for like half a sec. before it reboots again) ... therefore I am unable to fully charge my bricked phone without it constantly rebooting (endless loop) as soon as it is plugged into the wall or USB laptop (same thing)... SO: if I cannot charge my phone to at least 50% let alone even 15%, fastboot won't work ... what to do??? thanks again for your much appreciated help and support ...
galaxy_note_user said:
Hi again .... ok, I now know exactly how to use fastboot/adb commands to revive/unbrick my htc one x thanks to you! However, therein lies the biggest dilemma of all ... fastboot wont write to the phone only because it says the battery is too low on my phone which it is ... if I plug my phone into A/C power, phone keeps on rebooting endlessly with 0.5 sec charging (red light on for like half a sec. before it reboots again) ... therefore I am unable to fully charge my bricked phone without it constantly rebooting (endless loop) as soon as it is plugged into the wall or USB laptop (same thing)... SO: if I cannot charge my phone to at least 50% let alone even 15%, fastboot won't work ... what to do??? thanks again for your much appreciated help and support ...
Click to expand...
Click to collapse
just leave it plugged in.. it should charge
bricked htc ...
thanks for the reply (appreciate it!) ... will leave phone plugged into the wall with endless loops of rebooting hoping it will eventually charge though I don't know how long this will take ... thanks again, have a great weekend
---------- Post added at 08:51 PM ---------- Previous post was at 08:45 PM ----------
just wondering, if the phone keeps on rebooting that way for hours, won't that damage any hardware in the phone? (screen, motherboard, etc ...)? or the phone can take it? thanks!
bricked htc one x ...
This message is for sm1 ... I was told you have experience on how to use mac os x with htc one x ... I have a bricked htc one x (unlocked and rooted)... battery is extremely low, phone keeps booting endlessly ... i was told by another senior admin here that i have to push a boot.img via fastboot which I finally learned how to do, however, all I get in the terminal app in mac when i try to push the bbot.img is "waiting for device" and it takes too long ... any suggestions would greatly be appreciated ... thanks!
galaxy_note_user said:
This message is for sm1 ... I was told you have experience on how to use mac os x with htc one x ... I have a bricked htc one x (unlocked and rooted)... battery is extremely low, phone keeps booting endlessly ... i was told by another senior admin here that i have to push a boot.img via fastboot which I finally learned how to do, however, all I get in the terminal app in mac when i try to push the bbot.img is "waiting for device" and it takes too long ... any suggestions would greatly be appreciated ... thanks!
Click to expand...
Click to collapse
if the phone is charged, make sure you reboot to bootloader (hold the volume down button as it boots), then you can get into fastboot mode.
Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
fnstGoliath said:
Hello xda,
a friend of mine just gave me his HTC Sensation because it isnt running quite a while. The problem is that i haven't had a HTC device ever and I don't really know what to do and what information you need to help me so I'd be happy if u just tell me what information you need and I will try to get them for you.
The Information I got so far is:
- if I want to boot it, it stays at the HTC Logo
- CWM starts with some errors but you can't perform a wipe (just turns off)
- Bootloader starts as well but you can't perform wipe either, nor flash new CWM
- If i connect it with the computer while in fastboot it changes to "fastboot usb" but adb cannot find the device, though i installed first the drivers, lateron htc sync. Windows just calls it "myhtc"
bootloader says:
"PYRAMID PVT SHIP S-OFF RL
HBOOT . 1.27.1100
RADIO - 11.22.3594.07_M
OpenADSP-v02.6.0.2226.00.0131
eMMC-boot
Jan 13 2012, 17:33:34"
So what should I try to do or what information will you need.
I would be very happy if u can help me
Click to expand...
Click to collapse
Hi,
Go HERE
Install 4 EXT recovery,using one of the 3 methods available.(probably third)
Then,try to install ARHD ROM.(same guide)
No need to change the firmware.
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
fnstGoliath said:
So I just tried to flash 4 EXT Recovery but it doesn't work..
It finds the zip, ask me whether i want to start the update, i press vol up and "Update is in progres.." appears but nothing more, I'm waiting since 5 minutes and will probably have to power off the phone now.. the same happened when i tried to install cwm so theres something wrong with the bootloader?
What can I do now?
Click to expand...
Click to collapse
Hi,
Maybe you should run a RUU.
Look HERE
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
fnstGoliath said:
I also thought about this but as I said adb doesn't find the device.
Since I never ran a RUU, can I still flash or do I have to get adb to run with the device.
Anyway, I cannot read out the CID of the device so if it is possible, which RUU should I flash?
Thanks for your help
Click to expand...
Click to collapse
Hi,
Try installing these windows 7 & 8 drivers (assuming you have a windows 7 or 8 machine)
Reboot your PC and see if your phone is recognized in ADB.
You are s-off,so you do not have to match it 100%
Just get a RUU that is close to your region or carrier.
If you get the wrong one,it is not a problem.
It will just give you an error.
Then,just try another.
)
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
fnstGoliath said:
Well I just installed those drivers but same result as before..
Windows says "MyHTC" and after i write "adb devices" into the cmd window it says "daemon not running. starting it on port 5037. daemon started succesfully. List of devices attached." and the next time i write adb devices it just says "List of devices attached".
Bootloader still says Fastboot USB.
So maybe there's something wrong with my adb?
Well can i flash RUU without adb finding my device or cant I?
Click to expand...
Click to collapse
Hi,
Not sure what is happening with your ADB.
Look HERE for help.
In order to run a RUU ,you need to put the bootloader into fastboot,and plug in the USB.
It should show what yours is showing.
So, it should work.
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
fnstGoliath said:
After "List of devices attached" there is no device shown, I didn't leave anything adb shows, so this is still right? Usually it always shows my device ^^
So my adb is probably not running right or it is about my phone
So my next step should be adb showing my device and therefore reinstall android sdk, java, stuff until it might show the phone
or just do something with the phone?
I still think that i cannot run a ruu without any device shown? Didnt really get an answer on this question I guess or I didnt realize it
Click to expand...
Click to collapse
Hi,
Just run the RUU.
It will only show error if it does not work.
No big deal,and no damage done.
Just try another one.
if you enable usb debugging might help too
Well.. I just started "RUU_Pyramid_HTC_Europe_1.50.401.1_Radio_10.56.9035.00U_10.14.9035.01_M_release_223042_signed" and everything went fine until installation, no errors at all. Now the installer is stuck at "restarting bootloader" (or something equal, the installation is german) and the phone didnt do anything at all. It's now 15 minutes since the installation started so I probably will try another one but isn't it weird that ther is no error at all?
What should I do if the next RUU does exactly the same?
*edit:
just seeing page 2. How should I enable usb debugging without booting the phone?
*edit2:
second RUU: Same thing, no error but it didnt go further then "Restarting bootloader".
What to do now?
Any further Ideas what I could try?
Puuuush
fnstGoliath said:
Any further Ideas what I could try?
Puuuush
Click to expand...
Click to collapse
Put phone into bootloader then connect to pc and run the RUU
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
The phone was in fastboot usb while running the ruu for sure ..
fnstGoliath said:
The phone was in fastboot usb while running the ruu for sure ..
Click to expand...
Click to collapse
Hi,
Try running a RUU with the same radio (11.22) that you have installed.
You will not damage the phone.
It is not always an exact science with RUU.
Sometimes it is just trial and error.
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
fnstGoliath said:
So it is often that there is no error at all?
I just thought flashing wrong RUU will cause an error and not stopping at restarting bootloader. And anyway the bootloader seems pretty broken since it is not flashing anything at all ^^
Still i gonna try it
Click to expand...
Click to collapse
Hi,
Probably ,the only thing that will fix your problem is a RUU.
So,keep trying different ones until it works.
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
fnstGoliath said:
I finally managed to find the phone via adb! I think that's a great step.
The biggest problem is that I lose any contact to the phone when i reboot it into bootloader.
I can just boot the phone into recovery and use any other adb function but as soon as I boot it into bootloader I can't do anything anymore.
That's why I cannot use any fastboot commands to flash a zip, neither run a RUU completely i guess.
So I think that i need any rom to either flash via recovery or just via PC not using fastboot/bootloader at all.
Are there any possibilities for me now?
Click to expand...
Click to collapse
Hi,
Plug your phone into the PC.
Go to device manager,and where it says MyHTC,right click and update driver.
Browse to the windows 7 & 8 drivers I gave you earlier.
Update,unplug phone ,and reboot PC.
Get a RUU that shows 3.32 or 3.33 in the title,and matches your region
Pull your battery.
Put it back in,and hold volume down and power button together.
Scroll to fastboot.
Plug in usb and run RUU from the PC
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
mattsd said:
Would somebody be able to help?
My phone has been playing up a lot lately. I was running MIUI.
Also the volume buttons do not work on the phone.
At the moment i have a phone which is stuck on the MIUI boot screen(just the yellow "MI" symbol)
I would like to get my phone back to stock, i have read so far that i will have to use an RUU (not sure if this is suitable or not for my situation?)
There are a few problems i have with this.
I have no idea of knowing what CID i am running, and no idea how to find it with my phone in its current state.
When i do look on the links to RUU pages i am unable to find one that is suitable for Orange (EE??) UK
[*[I have no experience of ADB, and if i need to use that i will need a complete NOOBS guide to how to use it.
Any help would be appreciated, even links to other pages etc.
Many thanks in advance for your help
Matt
Click to expand...
Click to collapse
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
malybru said:
Hi,
Look HERE
Look in the list of RUU's for a Europe one that is close or higher than your phone.
Click to expand...
Click to collapse
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
mattsd said:
Thankyou soo much for the response.
When you say close to or higher than what on my phone what do you mean?
Then i am assuming it will work if the phone is stuck on the boot screen?
Many Thanks
Click to expand...
Click to collapse
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
malybru said:
Hi,
The RUU runs from the PC.
All you need to do on the phone is to go to bootloader,then, fastboot, and plug in your USB cable and run the RUU.
Look at the thread I gave you.
2.3 To find your software version:
Click to expand...
Click to collapse
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
mattsd said:
Ok and how do i go to the boot loader with no functioning volume buttons?
Thanks
Click to expand...
Click to collapse
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
rzr86 said:
do this
switch on your device normally
probably it will stuck in the yellow miui
then connect it to pc via usb
from pc go to the folder where you have adb and fastboot files
open a command window in that folder and do
adb reboot bootloader
Click to expand...
Click to collapse
LEGEND!!
Thanks
mattsd said:
LEGEND!!
Thanks
Click to expand...
Click to collapse
no problem mate
rzr86 said:
no problem mate
Click to expand...
Click to collapse
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
mattsd said:
When i got home and tried this i have no joy.
I get: "error: device not found"
I checked device manager to see if there was an android device that i have no drivers installed but everything is normal.
Any Ideas?
Many Thanks
Click to expand...
Click to collapse
Hi,
Check my signature.
#27
Make sure you are not using usb 3.0 slots or hubs.
Try slots at the front and back.
Use good cables.
Guys I REALLY NEED your HELP.
Here's What I did..
1. Installed CWM on my NOKIA X
2.Got into Recovery mode(It's Cool actually)
3.Thought of installing minirom kitkat on it..(I had already copied it to my removable sd card.)
4.Went through all the menus,,, did nothing,,, and somewhere I saw advanced,, got into it (I didn't know what I was thinking) I cleared every option that it had including cache, memory,sd card, emmc and also some boot related stuff..
5.All of a sudden I couldn't move the options so I just removed the battery and tried to power it on....(**** Happens)-Phone is not powering on.... no boot no light just A DEAD PHONE.
plz gus I Really NEED HELP. How Can I Solve this Problem.........................................................................................Plz plz plz plz.......:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
I think this is hard brick.(very hard to fix) are you able to open factory mod now? if no then wait for developers to help you to fix hard brick. or if your device showing on pc then you can flash stock rom...
•axe• said:
I think this is hard brick.(very hard to fix) are you able to open factory mod now? if no then wait for developers to help you to fix hard brick. or if your device showing on pc then you can flash stock rom...
Click to expand...
Click to collapse
no my phone's not powering up and i'm not able to open factory mode....... Plz help
Aztile said:
no my phone's not powering up and i'm not able to open factory mode....... Plz help
Click to expand...
Click to collapse
download and open ADB driver installer
is your device showing here? or download and open adb shell and type adb devices
is your device listed here?
if yes then download stock rom for nokia x
and flash is with any flash tool (like odin)
(make sure you have installed your phone to the same pc before means you have drivers)
if your device not showing then contact nokia care (dont tell them your story otherwise your warrenty will over tell them only that your mobile is not turning on )
•axe• said:
download and open ADB driver installer
is your device showing here? or download and open adb shell and type adb devices
is your device listed here?
if yes then download stock rom for nokia x
and flash is with any flash tool (like odin)
(make sure you have installed your phone to the same pc before means you have drivers)
if your device not showing then contact nokia care (dont tell them your story otherwise your warrenty will over tell them only that your mobile is not turning on )
Click to expand...
Click to collapse
Sorry buddy...... Tried it... but no use
All we can do is to refer you to a service center. Sorry.
Moderators, please verify my account. I am sick of the five-minute post wait.
Sent from my XT1022 using the XDA Premium 4 app.
Try this..power the phone off, wait 5 mins, then press and hold power for 60 seconds, and check if you see any signs of the phone coming back to life. If not, then the next option is the service center
that too is not working.................Is there no one inthis whole XDA Universe who can help me..... come on guys there must be someone................:crying::crying::crying:
tech_master said:
Moderators, please verify my account. I am sick of the five-minute post wait.
Click to expand...
Click to collapse
The five-minute post limit is lifted once you have reached 10 posts. The moderators have nothing to do with it, as the process is automated to lift the wait after you post 10 times.
The reason for this wait is to keep new users from rapidly posting uselessly just to achieve 10 posts.
Dude This is crazy
thenookieforlife3 said:
The five-minute post limit is lifted once you have reached 10 posts. The moderators have nothing to do with it, as the process is automated to lift the wait after you post 10 times.
The reason for this wait is to keep new users from rapidly posting uselessly just to achieve 10 posts.
May I have a post thank for helping?
Click to expand...
Click to collapse
Dude this is really crazy....... I thought it was someone trying to help me there and now this............................................ AAAhhhhhhh:crying::crying::crying:
Aztile said:
Dude this is really crazy....... I thought it was someone trying to help me there and now this............................................ AAAhhhhhhh:crying::crying::crying:
Click to expand...
Click to collapse
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
aah come on
thenookieforlife3 said:
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
Post thank for the real answer?
Click to expand...
Click to collapse
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
aah come on
thenookieforlife3 said:
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
Post thank for the real answer?
Click to expand...
Click to collapse
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
Aztile said:
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
You said you've cleared eMMC and also some boot related stuff.
Well, messing with your eMMC and boot partition isn't a good idea, if you wiped your entire eMMC partition it means you've also wiped bootloader stuff...
I'm sorry but looks like your phone is totally bricked....
First of all stop shouting...!
Are you sure you choose "advaneced menu" and not "mount and storage" ....?
Also me too I think your device is bricked...
If you can't recognise it from fastboot and adb and you can boot to bootloader and recovery mode it is bricked...
root-expert said:
First of all stop shouting...!
Are you sure you choose "advaneced menu" and not "mount and storage" ....?
Also me too I think your device is bricked...
If you can't recognise it from fastboot and adb and you can boot to bootloader and recovery mode it is bricked...
Click to expand...
Click to collapse
Ooops Sorry.....
Ok I understood..... IT'S BRICKED..........
Well then how to unbrick it
Aztile said:
Ooops Sorry.....
Ok I understood..... IT'S BRICKED..........
Well then how to unbrick it
Click to expand...
Click to collapse
If your phone won't turn on at all, it's totally bricked. Only a motherboard replacement will fix it...
As you know your phone has hard bricked buddy
then you should also know you cant fix it
try odin and flash bootloader (if u can without open download mode)
or Nokia care is the best way...