Related
Good morming...I just was looking around under settings, and noticed under under the "about device", I dont have an option to check for updates. I remeber before seeing it, but would me being rooted have anything to do with that. I am enclosing a screenshoot to show what I mean. Any input on this would be appreciated.
Sent from my GT-P6210 using Tapatalk 2
Very weird. Are u sure it cant be scrolled ?
Or maybe try full wipe ?
Sent from my GT-S5830 using Tapatalk 2
Samsung remotely removed the option because they never plan on updating....
just kidding of course.
This happen to me a bunch of times, Its from removing a certain samsung .apk from /system/app/ not exactly sure which one.
proactix said:
Good morming...I just was looking around under settings, and noticed under under the "about device", I dont have an option to check for updates. I remeber before seeing it, but would me being rooted have anything to do with that. I am enclosing a screenshoot to show what I mean. Any input on this would be appreciated.
Sent from my GT-P6210 using Tapatalk 2
Click to expand...
Click to collapse
Have u tried reboot?
Sent from my GT-S5830 using Tapatalk 2
I don't have one too. But I know I had one. I uninstalled the Update apk of some sort though so I know the reason why it isn't on mine. I also disabled it at Start-up.
Thank you all for your input. I just checked and I still have the software apk installed. And i did a reboot and still dont have the option to check for updates, so I guess I will try a wipe and see what that does.
Sent from my GT-P6210 using Tapatalk 2
Have you tried simply turning on and off the "Auto update" option right below the "Update (Check for updates)"-listing?
That sometimes helps.
I havent been on honeycomb for a long time, but I know this happened to me a few times, and I researched by deleting one samsung apk at a time. I think its the SamsungApps.apk or the samsung store, strangely enough.
there is a way to check for OTA's without this option in settings.. at least for gt-p6200 by going into service mode.. ( you can choose from 3 different OTA servers..; at least for my device I could)
cheers.
Update: I tried doing a full wipe but didnt restore the update button, so I had to reflash the firmware with Odin, and have the update option back. I just wished I knew what I deleted that caused this and not happen again.
Sent from my GT-P6210 using Tapatalk 2
Damn dude, it is very unlikely the ICS came as OTA update or samsung releases any HC OTA update before ICS. So you have all this trouble for a dead option.
Sent from my MB525 using Tapatalk 2
Well, I've very similar problem with my P6210. I have Software update option in About device menu but if I tap Update (Check for software update) nothing happens since I put CWM to my tab.
air001 said:
Well, I've very similar problem with my P6210. I have Software update option in About device menu but if I tap Update (Check for software update) nothing happens since I put CWM to my tab.
Click to expand...
Click to collapse
Toggle the "Auto Update" button first couple of times and then the "Update". That should work.
Sent from my GT-P6210
miksumortti said:
Toggle the "Auto Update" button first couple of times and then the "Update". That should work.
Sent from my GT-P6210
Click to expand...
Click to collapse
Thanks a lot. It works.:victory:
k_t_b said:
Have you tried simply turning on and off the "Auto update" option right below the "Update (Check for updates)"-listing?
That sometimes helps.
Click to expand...
Click to collapse
This is all that needs to be done. When mine was doing this, I just unchecked both boxes for automatic software update.
long time lurker and now I've finally screwed up enough to where I need to ask some questions.
Had my tf700 for a few weeks. rooted while on ics. installed goomanager to make back up. installed rootkeeper. have not installed any roms. Tried several times to get into recovery mgr but kept getting the triangle. so, today, I upgraded to jb. checked rootkeep and everythng was good. everythng had been good until I just downloaded that worthless beats audio app. now I'm stuck with a circle going round and round and cant do anythng else. could really use some help with some steps to take to fix this thing. Thanks - Dave
davew0670 said:
long time lurker and now I've finally screwed up enough to where I need to ask some questions.
Had my tf700 for a few weeks. rooted while on ics. installed goomanager to make back up. installed rootkeeper. have not installed any roms. Tried several times to get into recovery mgr but kept getting the triangle. so, today, I upgraded to jb. checked rootkeep and everythng was good. everythng had been good until I just downloaded that worthless beats audio app. now I'm stuck with a circle going round and round and cant do anythng else. could really use some help with some steps to take to fix this thing. Thanks - Dave
Click to expand...
Click to collapse
Try to go back into recovery by hold down volume down and power button until you see while text on the screen then release both buttons, now press the volume down button until the "wipe data" is highlighted, now press the volume up button twice to execute factory reset. Once done see if you can boot back into the OS.
buhohitr said:
Try to go back into recovery by hold down volume down and power button until you see while text on the screen then release both buttons, now press the volume down button until the "wipe data" is highlighted, now press the volume up button twice to execute factory reset. Once done see if you can boot back into the OS.
Click to expand...
Click to collapse
awesome! thank you! Am I going to lose root now?
davew0670 said:
awesome! thank you! Am I going to lose root now?
Click to expand...
Click to collapse
yes, and possible 50/50 you may able to get it back....will see, one step at a time.
buhohitr said:
yes, and possible 50/50 you may able to get it back....will see, one step at a time.
Click to expand...
Click to collapse
how long should a factory reset take? Has been 15 minutes or so.
davew0670 said:
how long should a factory reset take? Has been 15 minutes or so.
Click to expand...
Click to collapse
I would let it run for about 30min and reboot if it's not coming back. Is yours working?
Nope...still doing the same thing.
Sent from my SPH-L710 using xda app-developers app
davew0670 said:
Nope...still doing the same thing.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Your bootloader/recovery image maybe corrupted. Next thing to do is to flash a full Asus firmware. This will wipe out your root.
buhohitr said:
Your bootloader/recovery image maybe corrupted. Next thing to do is to flash a full Asus firmware. This will wipe out your root.
Click to expand...
Click to collapse
How do I do this?
Sent from my SPH-L710 using xda app-developers app
davew0670 said:
How do I do this?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
anyone?
downloaded...10.4.4.16
now I just need to get it on device. Do I have to use nvflash?
davew0670 said:
anyone?
downloaded...10.4.4.16
now I just need to get it on device. Do I have to use nvflash?
Click to expand...
Click to collapse
Unzip the zip file downloaded from Asus site, the final file name should be "US_epad-user-10.4.4.16.zip", copy this file to the root of your micro sdcard. turn off your device, Insert the sdcard back into your device, boot into recovery, by default RCK should be highlighted, just hit the volume up button to execute the upgrade. If you have a red android, try to rename the file to "EP201_768_SDUPDATE.zip" and try again. One thing that really bugged me is that wipe data (factory reset) did not work as normal, but ignore this for now.
buhohitr said:
Unzip the zip file downloaded from Asus site, the final file name should be "US_epad-user-10.4.4.16.zip", copy this file to the root of your micro sdcard. turn off your device, Insert the sdcard back into your device, boot into recovery, by default RCK should be highlighted, just hit the volume up button to execute the upgrade. If you have a red android, try to rename the file to "EP201_768_SDUPDATE.zip" and try again. One thing that really bugged me is that wipe data (factory reset) did not work as normal, but ignore this for now.
Click to expand...
Click to collapse
tired both and got red triangle both times.
davew0670 said:
tired both and got red triangle both times.
Click to expand...
Click to collapse
You renamed it without the quotation right? like EP201_768_SDUPDATE.ZIP
Also make sure you don't have any other zip file(s) in the root of your sdcard.
buhohitr said:
You renamed it without the quotation right? like EP201_768_SDUPDATE.ZIP
Click to expand...
Click to collapse
yes..
should the rename thing thing work with any file? i renamed the 10.4.4.16 update. Ive seen other people renaming to 10.4.4.18 update. I cant find the 10.4.4.18 update to give it a try.
davew0670 said:
yes..
should the rename thing thing work with any file? i renamed the 10.4.4.16 update. Ive seen other people renaming to 10.4.4.18 update. I cant find the 10.4.4.18 update to give it a try.
Click to expand...
Click to collapse
Yes, here is location for all the updates. Possible your download file is corrupted, try the .18 or .20
http://forum.xda-developers.com/showthread.php?t=1734005
buhohitr said:
Yes, here is location for all the updates. Possible your download file is corrupted, try the .18 or .20
http://forum.xda-developers.com/showthread.php?t=1734005
Click to expand...
Click to collapse
that is where I tried to get the files from. kept getting searching for mirrors. none of the files are there anymore. or Im stupid which is a huge possibility.
davew0670 said:
that is where I tried to get the files from. kept getting searching for mirrors. none of the files are there anymore. or Im stupid which is a huge possibility.
Click to expand...
Click to collapse
What version you looking for like US .18?? I will test see if the link works or not!
buhohitr said:
What version you looking for like US .18?? I will test see if the link works or not!
Click to expand...
Click to collapse
YES
davew0670 said:
YES
Click to expand...
Click to collapse
link is working fine for me!
buhohitr said:
link is working fine for me!
Click to expand...
Click to collapse
http://beta.androidfilehost.com/?fid=9390135922294522652
This one?
I rooted my device before i got the OTA notification. i tried to upgrade like 4 or 5 times but it doesn't work! Does anybody know that how can i upgrade to JB? BTW i dont want to unlock my device.
Thanks in advance!
luscione said:
I rooted my device before i got the OTA notification. i tried to upgrade like 4 or 5 times but it doesn't work! Does anybody know that how can i upgrade to JB? BTW i dont want to unlock my device.
Thanks in advance!
Click to expand...
Click to collapse
what's the failure message? Also, can you run something on your phone before you do the upgrade?
Sent from my XT925 using Tapatalk 2
danifunker said:
what's the failure message? Also, can you run something on your phone before you do the upgrade?
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
yep i can run all the apps. it just says "The software update failed" . i tried to use voodoo temp un-root before upgrade but it still doesn't work. i cnan see a lay down android robot with exclamation mark.
luscione said:
yep i can run all the apps. it just says "The software update failed" . i tried to use voodoo temp un-root before upgrade but it still doesn't work. i cnan see a lay down android robot with exclamation mark.
Click to expand...
Click to collapse
I had this same problem, unrooted, and installed and it worked(I am on fido though)
waynold78 said:
I had this same problem, unrooted, and installed and it worked(I am on fido though)
Click to expand...
Click to collapse
.... did you delete some preloaded system apps? like 'rogers 1 Number' . i did but i did a factory data reset too, after all i tried to do upgrade again.. as you know it failed lol.... still need somebody to help me !!! plz!!!!
luscione said:
.... did you delete some preloaded system apps? like 'rogers 1 Number' . i did but i did a factory data reset too, after all i tried to do upgrade again.. as you know it failed lol.... still need somebody to help me !!! plz!!!!
Click to expand...
Click to collapse
@OP
I didn't get enough information as to why the firmware upgrade was failing. I was also going you could pull an xml fastboot for me from your existing setup if you are still rooted.
Please download this software https://play.google.com/store/apps/details?id=com.tranquilice.toolbox and make an xml backup of you're current phone. I also want the XML backup but it it's very large, so you should break it up into 100mb files using 7 zip and re-compress it. Then post it to your Dropbox. Don't worry this backup doesn't have any personal data.
Then you can download the update file from my Dev-host account here :
http://d-h.st/JNV
And save the file to your external sdcard.
Boot into recovery, then try to apply the update from sdcard, and write down exactly all the information it says (maybe take a picture of it using another camera). And send me all the information.
How to boot into recovery:
1) Power off phone completely
2) press and hold both volume buttons and at the same time press the power button.
3) use the volume down button to navigate the the recovery option, then press volume up.
4) an Android on the side will appear, now tot can proceed with updating
How to apply update in recoveyr mode:
1) press and hold both volume buttons while pressing power button
2) a menu will appear, use the volume buttons to navigate and the power button to select the option to update from external sdcard
3) find the update file and press the power button on it.
4) watch the update, if it fails please tell me all error messages, hopefully tot can take a picture for me.
Sent from my XT925 using Tapatalk 2
failed to upgrade to Jelly been
I have a fido motorola razr hd lte and rooted. I tried several times upgrading to Jelly Been using OTA and all failed.
Then I followed steps above and still failed.
I have actually uninstalled some default apps like SMS, file manager etc.
see my attachment.
Thanks for help in advance!
bosskai said:
I have a fido motorola razr hd lte and rooted. I tried several times upgrading to Jelly Been using OTA and all failed.
Then I followed steps above and still failed.
I have actually uninstalled some default apps like SMS, file manager etc.
see my attachment.
Thanks for help in advance!
Click to expand...
Click to collapse
Did you try to modify the update package? It looks like the update package doesn't have the same signature as it should.
Do not try to open up the ZIP file provided, just place it on the external SD card without touching it.
If you get another error after that, please the new error.
I'm having the same problem cause I deleted the bloat ware from my Rogers phone. From what I've been reading, I'm thinking about just staying on the 4.0.4.
Sent from my XT925 using xda app-developers app
superbrowndude said:
I'm having the same problem cause I deleted the bloat ware from my Rogers phone. From what I've been reading, I'm thinking about just staying on the 4.0.4.
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
Post a screenshot. It should be easy to put back any Rogers specific software on your phone since it already exists there in a different area!
Sent from my XT925 using Tapatalk 2
luscione said:
I rooted my device before i got the OTA notification. i tried to upgrade like 4 or 5 times but it doesn't work! Does anybody know that how can i upgrade to JB? BTW i dont want to unlock my device.
Thanks in advance!
Click to expand...
Click to collapse
You can't unlock the XT925. Use safestrap to flash roms
halo13 said:
You can't unlock the XT925. Use safestrap to flash roms
Click to expand...
Click to collapse
You can unlock the XT925. Its the 926 that can't be unlocked
Sent from my RAZR HD XT925
danifunker said:
Did you try to modify the update package? It looks like the update package doesn't have the same signature as it should.
Do not try to open up the ZIP file provided, just place it on the external SD card without touching it.
If you get another error after that, please the new error.
Click to expand...
Click to collapse
I have actually followed your 7 zip packages from the other post and upgraded my phone to 4.1.2 Rogers stock version, it loads with Rogers logo, but other than that, everything works. Thanks a lot.:good:
The only issue is that I have all rogers one number, one contact... apps and every time reboot has rogers logo. Is it possible to have fido one?
i cant even get into recovery lol...............
danifunker said:
what's the failure message? Also, can you run something on your phone before you do the upgrade?
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
i cant get into recovery lol.......................... and where is the xml back up file(i did the back up with droid razr m tools) ?
luscione said:
i cant get into recovery lol.......................... and where is the xml back up file(i did the back up with droid razr m tools) ?
Click to expand...
Click to collapse
Not sure, I think it is on the phone's internal sd memory. You can't boot now? Post the error... Or more symptoms.
Sent from my XT925 using Tapatalk 2
luscione said:
.... did you delete some preloaded system apps? like 'rogers 1 Number' . i did but i did a factory data reset too, after all i tried to do upgrade again.. as you know it failed lol.... still need somebody to help me !!! plz!!!!
Click to expand...
Click to collapse
"FDR" -> Factory/Full Data Reset does not replace applications that have been deleted.
The only way to fix is to put them back or RSD/Flash back to stock.
I hate these threads.
People remove apps and wonder why the upgrade doesn't work.
Don't remove factory applications, freeze/disable them!!!!!
Removing them will remove the ability to upgrade until the OS is back to stock.
The installer checks to make sure that the system and application area is untouched.
tech_head said:
"FDR" -> Factory/Full Data Reset does not replace applications that have been deleted.
The only way to fix is to put them back or RSD/Flash back to stock.
I hate these threads.
People remove apps and wonder why the upgrade doesn't work.
Don't remove factory applications, freeze/disable them!!!!!
Removing them will remove the ability to upgrade until the OS is back to stock.
The installer checks to make sure that the system and application area is untouched.
Click to expand...
Click to collapse
''1 contacts'' ''1 number'' ''my account'' ''ringbacks'' ''ringtones'' '' shop'' ''VVM plus'' ''anyplace live'' did i miis someting?
danifunker said:
Not sure, I think it is on the phone's internal sd memory. You can't boot now? Post the error... Or more symptoms.
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
just like this i installed ''Beats Audio'' before . should i do a reset ?
luscione said:
i cant get into recovery lol.......................... and where is the xml back up file(i did the back up with droid razr m tools) ?
Click to expand...
Click to collapse
it makes a backup folder on sdcard and puts in there...
I have rooted my device and want to stay on stock firmware for a while.
I have deleted all knox system files I can see but I'm still getting the annoying popup and notification.
what have I missed?
Freeeze maybe?
@rbiter said:
Freeeze maybe?
Click to expand...
Click to collapse
But what though? lol
I have no KNOX apps left in my system folder!
Obagleyfreer said:
But what though? lol
I have no KNOX apps left in my system folder!
Click to expand...
Click to collapse
Priv-apps folder?
Sent from my SAMSUNG-SM-G920AZ
daniel4653 said:
Priv-apps folder?
Sent from my SAMSUNG-SM-G920AZ
Click to expand...
Click to collapse
had a look in there to mate!
Also deleted stuff in the data folder and I think a few things in the etc folder.
So none of you guys who are rooted running stock have a knox warning issue showing up randomly?
search secu and delete anything with the knox icon (using titanium backup)
Saafir said:
What message are you receiving?
Click to expand...
Click to collapse
It says:
SECURITY NOTICE
UNAUTHORISED ACTIONS HAVE BEEN DETECTED.
RESTART YOUR DEVICE TO UNDO ANY UNAUTHORISED CHANGES.
if i click this message it open an app which has a big orange shield at the top and a slider to activate KNOX protection and anti malware.
I've already done that, numerous times! lol
I rooted by: flashing TWRP using Odin, then booted to recovery and flashed Super SU.
That's all I did.
So how exactly can I use Titanium Backup to help me?
what is Secu?
thanks for the help btw!
Obagleyfreer said:
I've already done that, numerous times! lol
I rooted by: flashing TWRP using Odin, then booted to recovery and flashed Super SU.
That's all I did.
So how exactly can I use Titanium Backup to help me?
what is Secu?
thanks for the help btw!
Click to expand...
Click to collapse
look up securityagentlog or something like that in Titanium backup and freeze that app. profit.
guaneet said:
look up securityagentlog or something like that in Titanium backup and freeze that app. profit.
Click to expand...
Click to collapse
Thanks man!
That was exactly it! I just went into System/app and deleted the security agent stuff
Thanks!!
If you tap and hold on a notification, it will reveal the source applications name, it should be something like ESLSecurityAgent or something like that.
anyway to remove that notification on a non rooted device ?, my brother installed the apk for the exchange email and receives the same notification , long press on it , app info no option to turn off notifications.
ex-28 said:
anyway to remove that notification on a non rooted device ?, my brother installed the apk for the exchange email and receives the same notification , long press on it , app info no option to turn off notifications.
Click to expand...
Click to collapse
Not sure on that, you could try using an app to freeze it from the play store.
Obagleyfreer said:
Thanks man!
That was exactly it! I just went into System/app and deleted the security agent stuff
Thanks!!
Click to expand...
Click to collapse
i have the same problem...!!!! how do you solve it please dude..?
Deleted security log agent message went after reboot but now it's back any ideas anyone
Saafir said:
KLMS Agent
Click to expand...
Click to collapse
Thanks mate that worked
---------- Post added at 02:38 PM ---------- Previous post was at 02:29 PM ----------
pnr2020 said:
Thanks mate that worked
Click to expand...
Click to collapse
Now it's back again it's driving me crazy can anyone help
Saafir said:
Freeze all these hightlighted, knox related apps
View attachment 3410660
View attachment 3410661
Click to expand...
Click to collapse
Thank you will try it now
I give in I just can't remove it
pnr2020 said:
I give in I just can't remove it
Click to expand...
Click to collapse
Titanium Backup; remove or freeze smartmanager. Problem is you can;t get to your battery stats anymore
Check Post #593 about WiFi Calling.
-------------------------------------------------------------------------------------------------------------------------------------------Thanks to all these amazing members for their contributions and insight.
// @Chainfire @jrkruse @princecomsy @Debuffer @zhuhang @colormedroid @Soooperstar @joedaddyoo @Araltd @Goongydin @jtash01 @izzibew26 @radink @Mast3rZero @YMNDLZ @Supermav \\-------------------------------------------------------------------------------------------------------------------------------------------
Root SM-G935P
Version G935PVPS5BRA1/G935PSPT5BRA1
----------------------------------
Before these steps, make sure USB Debugging is ON & Verify apps via USB is OFF in Developer Options.
Backup your device before making any changes/apply root. I am not responsible for damages.
Clear CACHE using [Volume Up + Home + Power] before this process and applying firmware.
----------------------------------
Stock Firmware
(Not necessary to DL if on current firmware RA1)
Download current firmware using SamFirm
Run .exe as Administrator and use SM-G935P for Model, SPR for region. Check Auto tab then click Check Update.
Once version appears on top right, click download.
Or you can download from HERE
To apply this firmware, use ODIN in download mode and apply BL,AP,CP,CSC (extracted from zip) to each designated slot.
Use HOME_CSC in CSC slot if you want to keep your settings/files.
(Currently uploading latest firmware to my database for a faster DL)
STEP ONE
-Download/Buy Package Disabler Pro + PD Plugin Engine from app store or install apks.
-Open PDP and insert this xml file to disable needed apps for root.
Link > HERE
STEP TWO
-Turn off phone into Download Mode (Volume Down + Home + Power)
-Connect device to PC and open ODIN(Administrator).
Link > HERE
ODIN v3.13 (patched) @realbbb
Link > HERE
-Click (AP) Slot and insert Eng Boot file.
Link > HERE
-Press Start & Device will reboot.
@JUSMEJOSE @jrkruse [Eng Boot]
-Change or add these strings below to your current build.prop in /system/ folder using a file explorer & text editor:
ro.characterisitics=Sprint
ro.telephony.default_network=10
ro.cdma.default_numeric=310120
ro.cdma.default_alpha=Sprint
ro.cdma.home.operator.alpha=Sprint
^--Status Bar String--^
Can be changed to your liking.
(Save build.prop file with permissions Read-Only)
STEP THREE
-Once Device is registered on computer/appears on your drive,
Run root.bat (extracted from SuperSU[2.82]RA1+WiFiCalling.zip)
Link > HERE
-Follow instructions and leave device connected. Don't interrupt process.
DEVICE will reboot once after removal of any previous lockscreen/fingerprints/settings.
Final reboot will occur after installaing SuperSu,Flashfire,& planting su.img into device's system.
All Done!
Thanks for these threads that helped me acquire root for Nougat.
(Outdated)
https://forum.xda-developers.com/sprint-s7-edge/how-to/root-t3410424
https://forum.xda-developers.com/sprint-s7-edge/how-to/root-pk1-lte-voice-mms-hotspot-t3557218
https://forum.xda-developers.com/sp...w-to-root-g935p-bootloader-4-pj2-pk1-t3534613
Love the walkthrough style. Thanks for writing this up.
Taking the dive later this week, I have been missing root since moving to QAA. I will try to update over the weekend.
Worked!
Everything worked like a charm. I was already on nougat. followed instructions from step 2 and everything is working. I did have to run root.bat twice to get supersu app to show up, but it was already stated in directions which helped greatly for me not to freak out at that point lol. Anyways as i stated it worked like a charm and anyone on the fence if you rooted before you will be able to do this for sure. Once again thank you very much good sir!
Thanks for the root method I have been waiting for something to come out can't wait to try.
And just a heads up it is frowned upon on XDA to share paid apps.
About to attempt, will post results
How is it running? Smooth? hot?
izzibew26 said:
Love the walkthrough style. Thanks for writing this up.
Click to expand...
Click to collapse
Thank you, that feels good. Good luck if you try to root!
Whentheworldends said:
Taking the dive later this week, I have been missing root since moving to QAA. I will try to update over the weekend.
Click to expand...
Click to collapse
It isn't hard, just have to be careful. I messed up so many times idk how many times I've had to flash stock img. Let me know what happens.
danweb66 said:
Everything worked like a charm. I was already on nougat. followed instructions from step 2 and everything is working. I did have to run root.bat twice to get supersu app to show up, but it was already stated in directions which helped greatly for me not to freak out at that point lol. Anyways as i stated it worked like a charm and anyone on the fence if you rooted before you will be able to do this for sure. Once again thank you very much good sir!
Click to expand...
Click to collapse
Awesome. You're welcome, glad it worked. Yea SuperSU is tricky and can be interferred with easily. Keep me posted of anything good or bad please. Have fun.
Josephigloe said:
Thanks for the root method I have been waiting for something to come out can't wait to try.
And just a heads up it is frowned upon on XDA to share paid apps.
Click to expand...
Click to collapse
Dont rush it. Take your time, and i wasn't sharing paid apks i was showing the play store where you can buy it. Good luck dude!
golpeen420 said:
About to attempt, will post results
Click to expand...
Click to collapse
You can dooooo it!
radink said:
How is it running? Smooth? hot?
Click to expand...
Click to collapse
Its smooth and fast but i ran into a problem. Somehow knox got enabled and my volume up button is prevented from security policy. Im going to look into it when im not working.
godpowerrr said:
Its smooth and fast but i ran into a problem. Somehow knox got enabled and my volume up button is prevented from security policy. Im going to look into it when im not working.
Click to expand...
Click to collapse
Thanks for the work! But not sure what you mean here. Are you saying Knox was tripped? And you cant use volume up when adjusting volume?
ryan2202 said:
Thanks for the work! But not sure what you mean here. Are you saying Knox was tripped? And you cant use volume up when adjusting volume?
Click to expand...
Click to collapse
Im guessing its a package i disabled or didn't disable so it will take a bit to sort out. Its no biggie i might need to reroot. I can still raise the volume if i press volume down and move the slider. This is the only minor problem I've seen.
Does anyone know where I can find the nougat firmware? Trying to start fresh after a not successful root. Thanks
stuckintheskull said:
Does anyone know where I can find the nougat firmware? Trying to start fresh after a not successful root. Thanks
Click to expand...
Click to collapse
Yes downgrade back then you'll get the nougat update then install it. Then you'll have it lol
Sent from my LGLS996 using XDA Free mobile app
Son Rise said:
Yes downgrade back then you'll get the nougat update then install it. Then you'll have it lol
Click to expand...
Click to collapse
Didn't know I could downgrade.
godpowerrr said:
Power On. It might seem laggy at first but let it load. Check and see if everything is working BT/HotSpot/Voice/MMS. Shouldnt have to edit any APN's or anything.
Click to expand...
Click to collapse
Okay, but what if there is no data? Then what?
Worked great buddy. No issues here. Runs just as smooth for me as stock did.
99thRangernick said:
Okay, but what if there is no data? Then what?
Click to expand...
Click to collapse
If that's the case I would suggest starting over...But just data? Can you call or text? Bluetooth?Hotspot? Is there an LTE symbol in notification bar with no data? Or is it just bars with no service completely? Double check your package disabler.
izzibew26 said:
Worked great buddy. No issues here. Runs just as smooth for me as stock did.
Click to expand...
Click to collapse
Congrats. I appreciate it.
godpowerrr said:
Congrats. I appreciate it.
Click to expand...
Click to collapse
I imported your XML files for the disabled packages and attempted root. I had an error where it would take a few minutes for an app to update after downloading, do you know how to fix this?
godpowerrr said:
If that's the case I would suggest starting over...But just data? Can you call or text? Bluetooth?Hotspot? Is there an LTE symbol in notification bar with no data? Or is it just bars with no service completely? Double check your package disabler.
Click to expand...
Click to collapse
I actually completely restarted the process by reflashing back to stock with the file you linked at the beginning and just followed the process again and got it working this time. Cheers for this tutorial. :good:
YMNDLZ said:
I imported your XML files for the disabled packages and attempted root. I had an error where it would take a few minutes for an app to update after downloading, do you know how to fix this?
Click to expand...
Click to collapse
Try clearing google play store and google play services cache, if there is little cache then clear data and reenter your gmail. Youre talking about when updating in play store right? If not try only disabling these below instead [from goongydin's thread] and flash engineer. Or manually disabling from list(dont import). But once we disable these apps and flash boot img, these apps aren't supposed to change status which would mean repetitive testing. My honest answer is always going to be try from beginning again.
Bootagent
Carrier Setup Wizzard
Chameleon
Com.android.carrierconfig
MobileInstaller
SAE
Setup Wizzard
securityLogAgent
99thRangernick said:
I actually completely restarted the process by reflashing back to stock with the file you linked at the beginning and just followed the process again and got it working this time. Cheers for this tutorial. :good:
Click to expand...
Click to collapse
There you go. Its always the second time isn't it... No problem gj