I rooted my device before i got the OTA notification. i tried to upgrade like 4 or 5 times but it doesn't work! Does anybody know that how can i upgrade to JB? BTW i dont want to unlock my device.
Thanks in advance!
luscione said:
I rooted my device before i got the OTA notification. i tried to upgrade like 4 or 5 times but it doesn't work! Does anybody know that how can i upgrade to JB? BTW i dont want to unlock my device.
Thanks in advance!
Click to expand...
Click to collapse
what's the failure message? Also, can you run something on your phone before you do the upgrade?
Sent from my XT925 using Tapatalk 2
danifunker said:
what's the failure message? Also, can you run something on your phone before you do the upgrade?
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
yep i can run all the apps. it just says "The software update failed" . i tried to use voodoo temp un-root before upgrade but it still doesn't work. i cnan see a lay down android robot with exclamation mark.
luscione said:
yep i can run all the apps. it just says "The software update failed" . i tried to use voodoo temp un-root before upgrade but it still doesn't work. i cnan see a lay down android robot with exclamation mark.
Click to expand...
Click to collapse
I had this same problem, unrooted, and installed and it worked(I am on fido though)
waynold78 said:
I had this same problem, unrooted, and installed and it worked(I am on fido though)
Click to expand...
Click to collapse
.... did you delete some preloaded system apps? like 'rogers 1 Number' . i did but i did a factory data reset too, after all i tried to do upgrade again.. as you know it failed lol.... still need somebody to help me !!! plz!!!!
luscione said:
.... did you delete some preloaded system apps? like 'rogers 1 Number' . i did but i did a factory data reset too, after all i tried to do upgrade again.. as you know it failed lol.... still need somebody to help me !!! plz!!!!
Click to expand...
Click to collapse
@OP
I didn't get enough information as to why the firmware upgrade was failing. I was also going you could pull an xml fastboot for me from your existing setup if you are still rooted.
Please download this software https://play.google.com/store/apps/details?id=com.tranquilice.toolbox and make an xml backup of you're current phone. I also want the XML backup but it it's very large, so you should break it up into 100mb files using 7 zip and re-compress it. Then post it to your Dropbox. Don't worry this backup doesn't have any personal data.
Then you can download the update file from my Dev-host account here :
http://d-h.st/JNV
And save the file to your external sdcard.
Boot into recovery, then try to apply the update from sdcard, and write down exactly all the information it says (maybe take a picture of it using another camera). And send me all the information.
How to boot into recovery:
1) Power off phone completely
2) press and hold both volume buttons and at the same time press the power button.
3) use the volume down button to navigate the the recovery option, then press volume up.
4) an Android on the side will appear, now tot can proceed with updating
How to apply update in recoveyr mode:
1) press and hold both volume buttons while pressing power button
2) a menu will appear, use the volume buttons to navigate and the power button to select the option to update from external sdcard
3) find the update file and press the power button on it.
4) watch the update, if it fails please tell me all error messages, hopefully tot can take a picture for me.
Sent from my XT925 using Tapatalk 2
failed to upgrade to Jelly been
I have a fido motorola razr hd lte and rooted. I tried several times upgrading to Jelly Been using OTA and all failed.
Then I followed steps above and still failed.
I have actually uninstalled some default apps like SMS, file manager etc.
see my attachment.
Thanks for help in advance!
bosskai said:
I have a fido motorola razr hd lte and rooted. I tried several times upgrading to Jelly Been using OTA and all failed.
Then I followed steps above and still failed.
I have actually uninstalled some default apps like SMS, file manager etc.
see my attachment.
Thanks for help in advance!
Click to expand...
Click to collapse
Did you try to modify the update package? It looks like the update package doesn't have the same signature as it should.
Do not try to open up the ZIP file provided, just place it on the external SD card without touching it.
If you get another error after that, please the new error.
I'm having the same problem cause I deleted the bloat ware from my Rogers phone. From what I've been reading, I'm thinking about just staying on the 4.0.4.
Sent from my XT925 using xda app-developers app
superbrowndude said:
I'm having the same problem cause I deleted the bloat ware from my Rogers phone. From what I've been reading, I'm thinking about just staying on the 4.0.4.
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
Post a screenshot. It should be easy to put back any Rogers specific software on your phone since it already exists there in a different area!
Sent from my XT925 using Tapatalk 2
luscione said:
I rooted my device before i got the OTA notification. i tried to upgrade like 4 or 5 times but it doesn't work! Does anybody know that how can i upgrade to JB? BTW i dont want to unlock my device.
Thanks in advance!
Click to expand...
Click to collapse
You can't unlock the XT925. Use safestrap to flash roms
halo13 said:
You can't unlock the XT925. Use safestrap to flash roms
Click to expand...
Click to collapse
You can unlock the XT925. Its the 926 that can't be unlocked
Sent from my RAZR HD XT925
danifunker said:
Did you try to modify the update package? It looks like the update package doesn't have the same signature as it should.
Do not try to open up the ZIP file provided, just place it on the external SD card without touching it.
If you get another error after that, please the new error.
Click to expand...
Click to collapse
I have actually followed your 7 zip packages from the other post and upgraded my phone to 4.1.2 Rogers stock version, it loads with Rogers logo, but other than that, everything works. Thanks a lot.:good:
The only issue is that I have all rogers one number, one contact... apps and every time reboot has rogers logo. Is it possible to have fido one?
i cant even get into recovery lol...............
danifunker said:
what's the failure message? Also, can you run something on your phone before you do the upgrade?
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
i cant get into recovery lol.......................... and where is the xml back up file(i did the back up with droid razr m tools) ?
luscione said:
i cant get into recovery lol.......................... and where is the xml back up file(i did the back up with droid razr m tools) ?
Click to expand...
Click to collapse
Not sure, I think it is on the phone's internal sd memory. You can't boot now? Post the error... Or more symptoms.
Sent from my XT925 using Tapatalk 2
luscione said:
.... did you delete some preloaded system apps? like 'rogers 1 Number' . i did but i did a factory data reset too, after all i tried to do upgrade again.. as you know it failed lol.... still need somebody to help me !!! plz!!!!
Click to expand...
Click to collapse
"FDR" -> Factory/Full Data Reset does not replace applications that have been deleted.
The only way to fix is to put them back or RSD/Flash back to stock.
I hate these threads.
People remove apps and wonder why the upgrade doesn't work.
Don't remove factory applications, freeze/disable them!!!!!
Removing them will remove the ability to upgrade until the OS is back to stock.
The installer checks to make sure that the system and application area is untouched.
tech_head said:
"FDR" -> Factory/Full Data Reset does not replace applications that have been deleted.
The only way to fix is to put them back or RSD/Flash back to stock.
I hate these threads.
People remove apps and wonder why the upgrade doesn't work.
Don't remove factory applications, freeze/disable them!!!!!
Removing them will remove the ability to upgrade until the OS is back to stock.
The installer checks to make sure that the system and application area is untouched.
Click to expand...
Click to collapse
''1 contacts'' ''1 number'' ''my account'' ''ringbacks'' ''ringtones'' '' shop'' ''VVM plus'' ''anyplace live'' did i miis someting?
danifunker said:
Not sure, I think it is on the phone's internal sd memory. You can't boot now? Post the error... Or more symptoms.
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
just like this i installed ''Beats Audio'' before . should i do a reset ?
luscione said:
i cant get into recovery lol.......................... and where is the xml back up file(i did the back up with droid razr m tools) ?
Click to expand...
Click to collapse
it makes a backup folder on sdcard and puts in there...
Related
long time lurker and now I've finally screwed up enough to where I need to ask some questions.
Had my tf700 for a few weeks. rooted while on ics. installed goomanager to make back up. installed rootkeeper. have not installed any roms. Tried several times to get into recovery mgr but kept getting the triangle. so, today, I upgraded to jb. checked rootkeep and everythng was good. everythng had been good until I just downloaded that worthless beats audio app. now I'm stuck with a circle going round and round and cant do anythng else. could really use some help with some steps to take to fix this thing. Thanks - Dave
davew0670 said:
long time lurker and now I've finally screwed up enough to where I need to ask some questions.
Had my tf700 for a few weeks. rooted while on ics. installed goomanager to make back up. installed rootkeeper. have not installed any roms. Tried several times to get into recovery mgr but kept getting the triangle. so, today, I upgraded to jb. checked rootkeep and everythng was good. everythng had been good until I just downloaded that worthless beats audio app. now I'm stuck with a circle going round and round and cant do anythng else. could really use some help with some steps to take to fix this thing. Thanks - Dave
Click to expand...
Click to collapse
Try to go back into recovery by hold down volume down and power button until you see while text on the screen then release both buttons, now press the volume down button until the "wipe data" is highlighted, now press the volume up button twice to execute factory reset. Once done see if you can boot back into the OS.
buhohitr said:
Try to go back into recovery by hold down volume down and power button until you see while text on the screen then release both buttons, now press the volume down button until the "wipe data" is highlighted, now press the volume up button twice to execute factory reset. Once done see if you can boot back into the OS.
Click to expand...
Click to collapse
awesome! thank you! Am I going to lose root now?
davew0670 said:
awesome! thank you! Am I going to lose root now?
Click to expand...
Click to collapse
yes, and possible 50/50 you may able to get it back....will see, one step at a time.
buhohitr said:
yes, and possible 50/50 you may able to get it back....will see, one step at a time.
Click to expand...
Click to collapse
how long should a factory reset take? Has been 15 minutes or so.
davew0670 said:
how long should a factory reset take? Has been 15 minutes or so.
Click to expand...
Click to collapse
I would let it run for about 30min and reboot if it's not coming back. Is yours working?
Nope...still doing the same thing.
Sent from my SPH-L710 using xda app-developers app
davew0670 said:
Nope...still doing the same thing.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Your bootloader/recovery image maybe corrupted. Next thing to do is to flash a full Asus firmware. This will wipe out your root.
buhohitr said:
Your bootloader/recovery image maybe corrupted. Next thing to do is to flash a full Asus firmware. This will wipe out your root.
Click to expand...
Click to collapse
How do I do this?
Sent from my SPH-L710 using xda app-developers app
davew0670 said:
How do I do this?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
anyone?
downloaded...10.4.4.16
now I just need to get it on device. Do I have to use nvflash?
davew0670 said:
anyone?
downloaded...10.4.4.16
now I just need to get it on device. Do I have to use nvflash?
Click to expand...
Click to collapse
Unzip the zip file downloaded from Asus site, the final file name should be "US_epad-user-10.4.4.16.zip", copy this file to the root of your micro sdcard. turn off your device, Insert the sdcard back into your device, boot into recovery, by default RCK should be highlighted, just hit the volume up button to execute the upgrade. If you have a red android, try to rename the file to "EP201_768_SDUPDATE.zip" and try again. One thing that really bugged me is that wipe data (factory reset) did not work as normal, but ignore this for now.
buhohitr said:
Unzip the zip file downloaded from Asus site, the final file name should be "US_epad-user-10.4.4.16.zip", copy this file to the root of your micro sdcard. turn off your device, Insert the sdcard back into your device, boot into recovery, by default RCK should be highlighted, just hit the volume up button to execute the upgrade. If you have a red android, try to rename the file to "EP201_768_SDUPDATE.zip" and try again. One thing that really bugged me is that wipe data (factory reset) did not work as normal, but ignore this for now.
Click to expand...
Click to collapse
tired both and got red triangle both times.
davew0670 said:
tired both and got red triangle both times.
Click to expand...
Click to collapse
You renamed it without the quotation right? like EP201_768_SDUPDATE.ZIP
Also make sure you don't have any other zip file(s) in the root of your sdcard.
buhohitr said:
You renamed it without the quotation right? like EP201_768_SDUPDATE.ZIP
Click to expand...
Click to collapse
yes..
should the rename thing thing work with any file? i renamed the 10.4.4.16 update. Ive seen other people renaming to 10.4.4.18 update. I cant find the 10.4.4.18 update to give it a try.
davew0670 said:
yes..
should the rename thing thing work with any file? i renamed the 10.4.4.16 update. Ive seen other people renaming to 10.4.4.18 update. I cant find the 10.4.4.18 update to give it a try.
Click to expand...
Click to collapse
Yes, here is location for all the updates. Possible your download file is corrupted, try the .18 or .20
http://forum.xda-developers.com/showthread.php?t=1734005
buhohitr said:
Yes, here is location for all the updates. Possible your download file is corrupted, try the .18 or .20
http://forum.xda-developers.com/showthread.php?t=1734005
Click to expand...
Click to collapse
that is where I tried to get the files from. kept getting searching for mirrors. none of the files are there anymore. or Im stupid which is a huge possibility.
davew0670 said:
that is where I tried to get the files from. kept getting searching for mirrors. none of the files are there anymore. or Im stupid which is a huge possibility.
Click to expand...
Click to collapse
What version you looking for like US .18?? I will test see if the link works or not!
buhohitr said:
What version you looking for like US .18?? I will test see if the link works or not!
Click to expand...
Click to collapse
YES
davew0670 said:
YES
Click to expand...
Click to collapse
link is working fine for me!
buhohitr said:
link is working fine for me!
Click to expand...
Click to collapse
http://beta.androidfilehost.com/?fid=9390135922294522652
This one?
Hi all , just joined xda-developers but i spend straight 14 hours trying to fix this DAMM photon q yesterday
all i got in the end is a normal boot after following this http://forum.xda-developers.com/showthread.php?t=2001108
BUT at the startup , the screen comes like for a millisecond and then this " starting services" logo doesn't go at all...it just continues forever
any help would be appreciate .
Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.
arrrghhh said:
Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.
Click to expand...
Click to collapse
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..
tune345 said:
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..
Click to expand...
Click to collapse
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!
arrrghhh said:
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!
Click to expand...
Click to collapse
i think i am a noob at explaining things but let me try again...i don't know the exact history of this phone , my friend gave it to me yesterday and its not stolen ... he paid his insurance every month but then who know what he did... i have no idea why its not qaulified for the official unlock probably because he bought a new phone on the same line so the company deactivated this phone..
ok so when i got the phone yesterday , the bootlocker logo appeared and i was unable to do anything ...then i installed CWMrecovery and it was successfull and then i installed every possible rom available online as far as i know but same thing happened with all of them ..... successfully installed , it reboots and little square thing saying " starting services..." and then it does not go away at all ... but at the same time i am able to bring the top menu ..and go to the settings and everything from there but i can't go to home screen since ...it is black and is occupied by "starting services.."
so finally i came accross this thread for master reboot and i followed it ....i installed TWRrecovery and made backup and then restored a backup providers by that guy ... i flashed new stock recovery after that... so following his thread , he told that if all went successful ... it will return to original stock
and now i am at the same screen as previous... " starting serivces..." my friend told me he tired to root it and he messed up really bad ..so i believe there is still some old files in the internal storage from previous rom versions.... but i deleted everything......wiped, data facotry reset and then
installed a clean backup provided by the thread starter...... and everyone else had success except me ...
i hope i answered your questions if not .. i would aprreciate if you tell me what exactly you want to know ..... thanks
i also tired every US ROMS from here http://sbf.droid-developers.org/asanti_c/list.php
and all of them showed " starting services.." after i installed them from sdcard using CWMrecovery.
we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader
Rangerbry said:
we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader
Click to expand...
Click to collapse
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip
tune345 said:
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip
Click to expand...
Click to collapse
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD
Rangerbry said:
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
ok i will do it right now...give me 1 minute
Woooooooooooooooooooooooooooooooo ..... DUDE YOU SAVED ME FROM GOING INSANE lol ....thanks
its working now ... i did that yesterday but my dumbass was choosing the whole zip file without extraction haha...
but the questing is which is the lastest update for it ??
If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD
Rangerbry said:
If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??
tune345 said:
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??
Click to expand...
Click to collapse
You should be able to and everything should function its a complete stock just as sprint flashed it
Sent from my GT-N8013 using Tapatalk HD
is there any other way around for bootlocker ...without official ??
Thank you so much Rangerbry.........
If you Flashed CWM and TWRP your bootloader is already unlocked
Rangerbry said:
If you Flashed CWM and TWRP your bootloader is already unlocked
Click to expand...
Click to collapse
This.
Glad you got it workin with RSD lite.
Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?
tune345 said:
Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?
Click to expand...
Click to collapse
For bootlogos: http://forum.xda-developers.com/showthread.php?t=1873834
Reactivate in Sprint? What do you mean? Only Sprint can tell you whether the phone can be activated or not. Call them. Not sure why you would even worry about that if it's not stolen.....
Ok I think I will go in store and see what happens...
Ok I have this anither problem now....batteryy life is very short..I charged in the morning and after straight 3 hours.of use its out ..from 96 ,%
M looking into market ...can someone throw some light on battery calibration ...mine phone is not rooted
Sent from my XT897 using xda app-developers app
My mtotorola device show" CustomerID error,contact Dealer Boot to Suspend/TCMD mode: dead: 0000；00000000；000000cc " message,when reboot the phone;could you help me how to deal with this?thanks!
Here you said:
My mtotorola device show" CustomerID error,contact Dealer Boot to Suspend/TCMD mode: dead: 0000；00000000；000000cc " message,when reboot the phone;could you help me how to deal with this?thanks!
Click to expand...
Click to collapse
What type of Motorola device is it, an Atrix 2? Does it boot up at all, or does it stop when it gets to that message?
Brought to you by time and relative dimensions in space.
1BadWolf said:
What type of Motorola device is it, an Atrix 2? Does it boot up at all, or does it stop when it gets to that message?
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
Yes,my Motorola device is Atrix2,and it stop when the screen show that message.
Here you said:
My mtotorola device show" CustomerID error,contact Dealer Boot to Suspend/TCMD mode: dead: 0000；00000000；000000cc " message,when reboot the phone;could you help me how to deal with this?thanks!
Click to expand...
Click to collapse
No people can help me????
Here you said:
No people can help me????
Click to expand...
Click to collapse
Have you tried a factory reset and/or reflashing the stock FXZ?
Brought to you by time and relative dimensions in space.
1BadWolf said:
Have you tried a factory reset and/or reflashing the stock FXZ?
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
Thanks for your help,my Atrix2 can't boot to the system,I have flashed the offical firmware (sbf.droid-developers.org/edison/list.php) It's still show that error message.and the phone stop boot up.The capture as below.
and need your do deep study for me again,thanks for your always reply!
What action did you do to cause this error in the first place?? Maybe then some one can try & help. Standard help advice would be to flash your device specific firmware using RSD lite 6.
Seems to be he was trying downgrade or he was flashing another carrier or other country firmware
Sent from my Golden'd Atrix HD MAXX using xda app-developers app
Did you by any chance take a backup if your CID???
Sounds to me like you've lost your CID and without restoring it there's really not much you can do.
And if by chance you didn't that I'm afraid would mean the phone can't be used.
May the -Mass times Acceleration- be with you...
deveshmanish said:
Did you by any chance take a backup if your CID???
Sounds to me like you've lost your CID and without restoring it there's really not much you can do.
And if by chance you didn't that I'm afraid would mean the phone can't be used.
May the -Mass times Acceleration- be with you...
Click to expand...
Click to collapse
Yes，I have lost my CID，and not backup。I have install the app “bootmenu.apk”,It can be used temparily;We hope the engineer can solve the problem completely;
So my friend's little brother messed up his phone with this error. He don't know what CID is and have no backup
Flashing exz didn't help.
Is it dead?
PhoenixNghi said:
So my friend's little brother messed up his phone with this error. He don't know what CID is and have no backup
Flashing exz didn't help.ANd BMM will
Is it dead?
Click to expand...
Click to collapse
It's screwed CID - unique number. But you can boot with BP tools, reroot with BP tools, install BMM 0.3.4 from playstore. And BMM will bypass CID via 2ndinit.
How to solve this CID error?
I already answered above you!! You can't solve it, you just can bypass it...
Use this tutorial to root via BP Tools: http://forum.xda-developers.com/showthread.php?t=2078021 .Then install BMM 0.3.4 (on this version you don't need to modify anything, it automated process for A2). And BMM will bypass it via 2ndinit.
Sent from my Atrix 2 using Tapatalk 2
turffe said:
I already answered above you!! You can't solve it, you just can bypass it...
Use this tutorial to root via BP Tools: http://forum.xda-developers.com/showthread.php?t=2078021 .Then install BMM 0.3.4 (on this version you don't need to modify anything, it automated process for A2). And BMM will bypass it via 2ndinit.
Sent from my Atrix 2 using Tapatalk 2
Click to expand...
Click to collapse
Hey mate how can i root via BP tools i have no idea could not find any info on the link you provided im back on ICS but can not root to install BMM as i get cid error when root process tries to reboot
jharn06 said:
Hey mate how can i root via BP tools i have no idea could not find any info on the link you provided im back on ICS but can not root to install BMM as i get cid error when root process tries to reboot
Click to expand...
Click to collapse
Use Power+Voldown+Voldown. When choose with volup bp tools. When rooting program reboots your phone (screen turns black) - hold volup+down buttons & reboot using bo tools.
turffe said:
Use Power+Voldown+Voldown. When choose with volup bp tools. When rooting program reboots your phone (screen turns black) - hold volup+down buttons & reboot using bo tools.
Click to expand...
Click to collapse
Amazing thanks mate im guessing there is no way to actually remove the text at boot?
jharn06 said:
Amazing thanks mate im guessing there is no way to actually remove the text at boot?
Click to expand...
Click to collapse
No, you cannot remove text unless you have YOUR OWN backup. You only can bypass it installing BMM 0.3.4 from Play Store (In this version you don't need do anything (it's automated process for A2).
jharn06 said:
Amazing thanks mate im guessing there is no way to actually remove the text at boot?
Click to expand...
Click to collapse
If you have previously backed up your CID through BMM or otherwise, you can restore it. Go to recovery, fw flashing and then restore CID. Select the backed up CID from your SD card and let it flash. The error message will be gone.
Remember this only works if YOU backed up the CID. Don't attempt to use someone else's.
Sent from my MB865 using xda app-developers app
Dbstudioz said:
If you have previously backed up your CID through BMM or otherwise, you can restore it. Go to recovery, fw flashing and then restore CID. Select the backed up CID from your SD card and let it flash. The error message will be gone.
Remember this only works if YOU backed up the CID. Don't attempt to use someone else's.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Restoring CID - fix this problem. How may CID be screwed i dont understand
This mighty be a noob question, so please bare with me.
I rooted my Moto G and installed custom recovery on it(TWRP), and I'm trying to do a OTA update.
But when the phone reboots, it goes to TWRP recovery screen and I don't know what to do from there.
Any help is appreciated!
Always a tricky thing ...... for some it works for some not.
Sometimes rooted phones cannot be updated sometimes yes.
Sometimes custom recoveries are able to update sometimes not.
Till now i have not found out a general answer to this Topic.
Did you change any system apps? Definately not a good idea if you want to update,
There are a few options you can do.
Go back to stock recovery
or
You can use siedeload functionality in TWRP.
Therefore you need the update file on your PC.
Then run:
Code:
adb sideload /path/to/update.zip
or
Install the the zip file via the update function in TWRP
For that you need to have the update file on the normal storage of the phone
At least one of these solutions should work for you.
If you don't have the OTA on your PC, you can look at /cache to find the OTA (only if you are rooted).
mokkami said:
Always a tricky thing ...... for some it works for some not.
Sometimes rooted phones cannot be updated sometimes yes.
Sometimes custom recoveries are able to update sometimes not.
Till now i have not found out a general answer to this Topic.
Did you change any system apps? Definately not a good idea if you want to update,
There are a few options you can do.
Go back to stock recovery
or
You can use siedeload functionality in TWRP.
Therefore you need the update file on your PC.
Then run:
Code:
adb sideload /path/to/update.zip
or
Install the the zip file via the update function in TWRP
For that you need to have the update file on the normal storage of the phone
At least one of these solutions should work for you.
If you don't have the OTA on your PC, you can look at /cache to find the OTA (only if you are rooted).
Click to expand...
Click to collapse
Ota upgrade will not work.. U need to download a stock ROM lyk slimkat or cyanogonmod 11
Sent from my Moto E using XDA Premium 4 mobile app
fabregus04 said:
Ota upgrade will not work.. U need to download a stock ROM lyk slimkat or cyanogonmod 11
Click to expand...
Click to collapse
But flashing that will mean that all user data will be deleted, right?
Sorry, I am trying really hard but with all these abbreviations I still can't get my head around what happens if I flash/load/recover x, y or z.
fertchen said:
But flashing that will mean that all user data will be deleted, right?
Sorry, I am trying really hard but with all these abbreviations I still can't get my head around what happens if I flash/load/recover x, y or z.
Click to expand...
Click to collapse
U need to back up everything.. Apss can u back up wid clean master n personal datas in Computer thats it..
Sent from my Moto E using XDA Premium 4 mobile app
fertchen said:
But flashing that will mean that all user data will be deleted, right?
Sorry, I am trying really hard but with all these abbreviations I still can't get my head around what happens if I flash/load/recover x, y or z.
Click to expand...
Click to collapse
backup with an app like these
Helium - App Sync and Backup [[ No Root Needed }}
https://play.google.com/store/apps/details?id=com.koushikdutta.backup
Titanium Backup ★ root
https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup
My Backup
https://play.google.com/store/apps/details?id=com.rerware.android.MyBackup
.
.
I am a noob at this so it took me a while to figure it out.
First and foremost you have to be in stock marshmallow with stock recovery to be able to do this.
This is the SD card method. Idk how to do the ADB method.
1. Make sure you have your SD card as portable storage, not as internal storage. (Have to format your SD card or use another SD card)
2. Download the OTA https://drive.google.com/file/d/0B3gPYUZ4nRLwOHJKQnNYczNEMHc/view?usp=sharing credit goes to @gokart2 for OTA
3. Move the ZIP inside your SD Card (I put mine in Downloads folder of my SD card) *Note* Per sources you can also save OTA in internal storage
4. Turn phone off
5. Hold down power button + volume down button until you see the stock menu
6. Press the volume up or down button to scroll though the list and when you find Recovery use power button to select it.
7. In recovery menu you will see a message saying "No command" don't worry. For this hold down the power button and tap the volume up button once and then let go of the power button. (You can try this couple times until you get it, It's kinda tricky)
8. Once you get in the recovery menu use the volume buttons to go to Flash update with SD card and use power button to select it, from there go to the directory where you put the update and select the OTA using power button.
9. Clear cache if you want and reboot.
10. Enjoy 7.0
That "no command" had me stumped".
BigBadger said:
That "no command" had me stumped".
Click to expand...
Click to collapse
hope this method worked
sauravdn said:
hope this method worked
Click to expand...
Click to collapse
It just finished updating the apps. Finally on stock 7.
I put the zip file directly on the internal storage, And recovery found it with no problem. Thanks for this tho, I'm finally on nougat!
:laugh:
BigBadger said:
It just finished updating the apps. Finally on stock 7.
Click to expand...
Click to collapse
tbkrazeey said:
I put the zip file directly on the internal storage, And recovery found it with no problem. Thanks for this tho, I'm finally on nougat!
:laugh:
Click to expand...
Click to collapse
Glad it worked out!
BigBadger said:
It just finished updating the apps. Finally on stock 7.
Click to expand...
Click to collapse
How's your phone working so far? Is everything functional?
Sent from my XT1575 using Tapatalk
hachuelo said:
How's your phone working so far? Is everything functional?
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
For me the phone was much more snappier.
So far so good. All sensors working. Calls sounds good. Bluetooth connects. No FCs noted. Smooth and cool after a reboot.
Getting rid of 'unlocked bootloader" message after flashing
I used the image and process outlined here to get rid of the annoying 'unlocked bootloader" message after flashing the OTA manually. No problems noted. I have not tried replacing the animation.
kept on getting invalid signature or something like that. any suggestions
nofroyo said:
kept on getting invalid signature or something like that. any suggestions
Click to expand...
Click to collapse
Try flash latest OTA first even you are at the latest build number.
You don't need a locked bootloader to sideload an OTA from the SD card.
Wifi issue
Anyone cant get to web browse for some reason even tho the wifi is suppose to be working like everything else like using the playstore or using social medias work but not chrome web browsing ?
Chien35 said:
Try flash latest OTA first even you are at the latest build number.
Click to expand...
Click to collapse
Can you tell me which one is the latest build? so i can try that
I'm a little disappointed with my battery life on nougat so far to be honest, it's in general 30 mins - hour shorter then I was before the update. But everything seems to be super stable and my phone doesn't get any hotter then usual.
Used this system and now I'm running stock Nougat,so far so good,smoother than Marshmallow,now the question: Is there a way to root Nougat?
You should factory reset right after taking the update. Otherwise your battery life will be unpredictable but usually worse.
nofroyo said:
Can you tell me which one is the latest build? so i can try that
Click to expand...
Click to collapse
It's the one with December 2016 security patch
sauravdn said:
hope this method worked
Click to expand...
Click to collapse
Worked for me, thanks! should I factory reset?