Database Info

[Soft Brick][Tipo][un/locked] How to come back to your stock ROM

Hello every body !
This is a little tutorial for: How to come back to your stock ROM when your Xperia device have a Soft Brick!
I do this with a Xperia Tipo but this tuto work for all the Xperia devices whith un/locked boot loader!
How can I have a little brick:
-Format a wrong partition.
-Install a incompatible ROM.
-etc...
1. What you need:
1.1 Flashtool !
Dowload link: http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/
1.2 Install drivers
Go to ./flashtool/drivers
Run Flashtool-Drivers
Select your phone. (If you don't know, Select all)
1.3 FTF file:
Go in this page: here (For Xperia Tipo)
Section Tipo
Select your FTF file (Advice: If you don't know which one is your take the GENERIC 11.0.A.4.22)
Save it in the directory: ./flashtool/firmwares
2. Installation:
2.1 Flashtool
Run Flashtool
Click on the lighting button (Flash)
Select Flashmod
Select your FTF file
Check "Exclude TA"
Click on the button OK
2.2 Flashmod
Disconnected your phone from your computer
Put your phone off
Hold the button [vol -] for 3s [Tipo only]
Plug your phone to your computer with holding your [vol -] button ! [Tipo only]
If it's work, your led going to be green.
Now flashtool will be install your FTF file on your phone.
When it's finished, you have to reboot.
And you are going to boot on your stock ROM !
Sorry for my bad English ^^
Put a thanks if I help you !
Big thanks to Tweak-Man !
Thanks to ToledoJab

You can also add how to make your very own .ftf from pc companion / update service before we start to use flashtool or try to gain root.
Sent from My Awesome Paradox ST21i

zzztidurvirus said:
You can also add how to make your very own .ftf from pc companion / update service before we start to use flashtool or try to gain root.
Click to expand...
Click to collapse
It's not the subject of the thread, but it's a good idea It's better to have a way to come back to a stock ROM BEFORE trying to make your own .FTF file. Without having a way to come back, it's a bit harder if you're stuck after trying to make your own FTF..

Tweak-Man said:
It's not the subject of the thread, but it's a good idea It's better to have a way to come back to a stock ROM BEFORE trying to make your own .FTF file. Without having a way to come back, it's a bit harder if you're stuck after trying to make your own FTF..
Click to expand...
Click to collapse
I think exacly the same things ! But it's a good idea for a second tuto! Thank you !

Yes I agree. Im just saying to put pc companion / update service as first step before root and mod and come back to stock.
Sent from My Awesome Paradox ST21i

swerky55 said:
Hello every body !
This is a little tutorial for: How to come back to your stock ROM when your Xperia device have a Soft Brick!
I do this with a Xperia Tipo but this tuto work for all the Xperia devices whith un/locked boot loader!
How can I have a little brick:
-Format a wrong partition.
-Install a incompatible ROM.
-etc...
1. What you need:
1.1 Flashtool !
Dowload link: http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/
1.2 Install drivers
Go to ./flashtool/drivers
Run Flashtool-Drivers
Select your phone. (If you don't know, Select all)
1.3 FTF file:
Go in this page: here (For Xperia Tipo)
Section Tipo
Select your FTF file (Advice: If you don't know which one is your take the GENERIC 11.0.A.4.22)
Save it in the directory: ./flashtool/firmwares
2. Installation:
2.1 Flashtool
Run Flashtool
Click on the lighting button (Flash)
Select Flashmod
Select your FTF file
Check "Exclude TA"
Click on the button OK
2.2 Flashmod
Disconnected your phone from your computer
Put your phone off
Hold the button [vol -] for 3s [Tipo only]
Plug your phone to your computer with holding your [vol -] button ! [Tipo only]
If it's work, your led going to be green.
Now flashtool will be install your FTF file on your phone.
When it's finished, you have to reboot.
And you are going to boot on your stock ROM !
Sorry for my bad English ^^
Put a thanks if I help you !
Big thanks to Tweak-Man !
Thanks to ToledoJab
Click to expand...
Click to collapse
The download link on the flash tool site for the "v0.9.11.0 full install" is a dud, should i just use a previous release?

drrobotnix said:
The download link on the flash tool site for the "v0.9.11.0 full install" is a dud, should i just use a previous release?
Click to expand...
Click to collapse
No this version works very well ! Did you follow the tutoriel for the installation of flashtool ?
There is a official flash tool from Sony and i try it but i didn't like it! The installation is very sad and I don't find how to repair my phone with. The version from the link is very simple and easy to install. ^^

sabbath sandscy
swerky55 said:
No this version works very well ! Did you follow the tutoriel for the installation of flashtool ?
There is a official flash tool from Sony and i try it but i didn't like it! The installation is very sad and I don't find how to repair my phone with. The version from the link is very simple and easy to install. ^^
Click to expand...
Click to collapse
Nevermind, the download link is working now.

Brick
i had cm10 fxp222 running on my tipo with this mod :
http://forum.xda-developers.com/showthread.php?t=2014242
i tried to change external SD from 4 to 16 GB, but after replacing and formating the new one, my tipo seems to be dead.
pushing powerbutton: no vibration, no screen, no led , no fasboot- or flash- mode.
flashtool, SUS, and pc-companion also didnt work ... battery was about 70 percent when it stopped working.
anyone got an idea ? possibly it has anything to do with the SD-Swap ?

[Q] Sony Xperia J IMEI Blank with sim no signal

I have a problem with my Sony Xperia J ST26i. It's rooted and unlocked.
Now I can start my mobile but he has no signal. Phone says there is no SIM card. If have my SIM card inserted. I have only wifi signal.
When I dial *#06# on my phone I see the display as shown in the attachment.
And with MTK Droid Tool I can't change/restore my IMEI. See also the screenshot of MTK. It says --- Unknown ROM structure, backup NOT possible!
Is there a another way to restore my IMEI? Also I have no .nv_data file. It's not on my phone. Have anyone this file for My phone or another solution?
Hardware : QCT
Model : ST26i
Build number : 11.2.A.0.31
Build date UTC : 20130419-050845
Android v : 4.1.2
Baseband v: -----
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 Fri Feb 1 13:04:19 CST 2013
Uboot build v : -----
LCD Driver IC : -----

Sometimes, there are few bugs in stock fw. Like me, i cant turn on wifi. So either u restore using PCC or flash custom rom might help.
Sent from my Xperia Miro using xda premium

kreatonn said:
Sometimes, there are few bugs in stock fw. Like me, i cant turn on wifi. So either u restore using PCC or flash custom rom might help.
Sent from my Xperia Miro using xda premium
Click to expand...
Click to collapse
Thanks for the reply.
PCC restore is not an option. I haven't make one. So I go look on the internet for a custom ROM flash.

If wont work after you flash rom again... just relock and then unlock phone bootloader again!

2010matej said:
If wont work after you flash rom again... just relock and then unlock phone bootloader again!
Click to expand...
Click to collapse
My phone is working again! I went to a phone store in Scheveningen and they have put a rom on my phone back they do work. It's the original stock rom. It cost me €15 bud it's working again. In the future, I'll backup first and the go play with my phone.
Thanks for the support! :good:

Stoetel said:
My phone is working again! I went to a phone store in Scheveningen and they have put a rom on my phone back they do work. It's the original stock rom. It cost me €15 bud it's working again. In the future, I'll backup first and the go play with my phone.
Thanks for the support! :good:
Click to expand...
Click to collapse
15€ for this? OMG man! YOu can do that alone for free,just use flashtool !

Hi. I have a similar problem.
Phone (xperia J) is working fine with stock rom, rooted and unlocked bootloader. But when i flash custom rom there is no IMEI, no signal and no efs folder (nv_data file). And if I go back to stock rom the IMEI is back and mobile network works.
So my question is is there any way to transfer IMEI, recreate efs folder, so I can use custom roms?

I have to post 10 times before I can post links outside this forum.

Stoetel said:
I have to post 10 times before I can post links outside this forum.
Click to expand...
Click to collapse
And I have to wait five minutes.
Well just posting...

Stoetel said:
And I have to wait five minutes.
Well just posting...
Click to expand...
Click to collapse
Just keep calm. The solution is near.

Stoetel said:
Just keep calm. The solution is near.
Click to expand...
Click to collapse
Another post...

Stoetel said:
Another post...
Click to expand...
Click to collapse
Three to go...

Stoetel said:
Three to go...
Click to expand...
Click to collapse
Almost.
Scroll down ....

Stoetel said:
Almost.
Scroll down ....
Click to expand...
Click to collapse
After this post the solution!

mtommy88 said:
Hi. I have a similar problem.
Phone (xperia J) is working fine with stock rom, rooted and unlocked bootloader. But when i flash custom rom there is no IMEI, no signal and no efs folder (nv_data file). And if I go back to stock rom the IMEI is back and mobile network works.
So my question is is there any way to transfer IMEI, recreate efs folder, so I can use custom roms?
Click to expand...
Click to collapse
Use it at your own risk. Read this text first before you get started.
If you follow these steps your phone is back to the original settings. You have your signal back and you IMEI.
Now you want your phone rooted! Right? Right!
For rooting Sony Xperia J 11.0.A.7.5 version, 11.2.A.0.21, 11.2.A.0.31 (and or later) using ClockworkMod (CWM) recovery necessitating an unlocked bootloader (unlocked bootloader).
Broadly speaking, the rooting procedure using CWM recovery to install su, busybox and Superuser.apk files bundled in the update. The steps are: flash CWM, rooting package update using CWM recovery, then flash the stock kernel back.
Preparation:
1. Fastboot files here
2. Unlock Boatloader.
3. CWM Sony Xperia J (boot.img)
4. Sony Xperia J stock kernel 11.0.A.7.5 (kernel.sin), can be extracted from the image ftf.
5. Update file for rooting (root_xperia_signed.zip
Update March 8, 2013:
All the required files in the download is packaged in the following:
- Version 11.0.A.7.5
- Version 11.2.A.0.21
- Version 11.2.A.0.31 (May 30, 2013)
The steps:
1. Root_xperia_signed.zip copy files to the internal / external sdcard.
2. Prepare boot.img, kernel.sin, fastboot.exe into the working folder. (Make self a folder on you PC Harddisk)
3. Prepare boot.img, kernel.sin, fastboot.exe into the working folder.
Turn off the phone, unplug the USB cable and go into fastboot mode by pressing and holding down the Vol + Up while plugging in the USB cable, fastboot mode can be seen from the blue LED light on the top panel.
4. Check whether the connection is correct fastboot, type in Command Prompt:
fastboot getvar version​
If prompt <waiting for device> is displayed, then the connection is not successful, try to check whether the driver for fastboot already installed.
5. Flash CWM and restart the phone:
fastboot flash boot boot.img
fastboot reboot​
6. When the phone restarts, observe the LED on the bottom of the panel when it turns purple, immediately press and hold the Vol + Up button until the LED turns blue to get into CWM. USB cable can then be removed.
7. At CWM, select install zip from sdcard, then choose zip from sdcard / external sdcard and select the file in step 1 above. Continue reboot system now and turn off the phone (if necessary by removing the battery and repeat to enter fastboot mode).
8. Repeat steps 3 and 4.
9. Flash stock kernel:
fastboot flash boot kernel.sin
fastboot reboot​
10. Turn on the phone, check whether the application is installed SuperSU. Congratulations rooting successful.
Originaly posted 11th July by Hamzie Fickri
This text comes from this page.

Thanks, but that's not what i needed.
I already have stock rom rooted and working. Problem is if I install custom rom (FXP, PA), rom starts but no mobile signal and no IMEI. So I cannot use it.
Is there a way to like "copy/paste" IMEI from stock rom to custom rom?
edit: read somewhere on xda that this is a CM10 bug and CM10 based roms for xperia J.

disregard my last post (and previous post also)
fixed it!
what I did:
1. flash original stock ICS rom - 11.0.A.7.5.CE
2. reboot phone and then shutdown (not sure if this is necessary)
3. flash CWM img from http://forum.xda-developers.com/showthread.php?t=2034639
4. install custom rom (FXP233)
5. reboot
and now mobile signal works and IMEI is back.
hope it helps somebody and sorry for hijacking your thread Stoetel

mtommy88 said:
disregard my last post (and previous post also)
fixed it!
what I did:
1. flash original stock ICS rom - 11.0.A.7.5.CE
2. reboot phone and then shutdown (not sure if this is necessary)
3. flash CWM img from http://forum.xda-developers.com/showthread.php?t=2034639
4. install custom rom (FXP233)
5. reboot
and now mobile signal works and IMEI is back.
hope it helps somebody and sorry for hijacking your thread Stoetel
Click to expand...
Click to collapse
No problem!
The importent thing is, your mobile is working fine again! :good:
Thanks for the response.

Is there any solution about this problem on tipo?
Sent from my ST21i using xda app-developers app

tassosmer said:
Is there any solution about this problem on tipo?
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
Here you can find the latest Android 4.0.4 version for the Sony Xperia Tipo ST21
And here the CWM for Tipo.
Kernel can you extract from the ftf file. You can open th ftf file with Winzip or Winrar.
Flashtool. You can also use this program to check if your phone is bootlocked.
Go check this site if you need your phone to unlock the bootloader.
Follow the instructions above in the previous post. Or search on this forum for the solution.
Good luck.

Guide: Installing Kernels/Roms on Xperia L (Unlocked Bootloader only)

Hey there guys, this thread is noob friendly and is made especially for those of you who just got their first Sony phone and decided to flash a custom kernel or rom.
I am not responsible for anything that happens to your phone, use this tutorial at your own risk.
Things you'll need:
- Xperia L with Unlocked Bootloader(ofcourse haha) Look here on how to unlock your bootloader.
- Flashtool
Installing a kernel (This tutorial is for 4.2.2 only, that is 15.3.A.0.26+)
1. Download phantom kernel from here (both Phantom_modules.zip and the boot.img) Place the "Phantom_modules.zip" into your phone (sd card or internal storage) Or you can use any other kernel's boot.img
2. After installing flashtool, or if you already have it installed, open it and click on the Flash icon (the first icon from the left)
4. When it asks you to choose a bootmode, select fastboot mode and press ok.
5. After all this has done turn of your phone (Xperia L).
6. Get out your usb cable and plug it into your computer while holding the "volume up" button. (notice your phone will glow blue below, this means that it is in fastboot mode.)
7. On the pop up window where it says "By Doomlord", choose "select kernel to flash". Locate your boot.img file that you just downloaded a while ago and select it.(Notice if the boot.img file is not showing up in the file menu, on the right cornor make sure the file type is set as "*.img")
8. Be patient and wait till the kernel has been flashed, should take no longer than 10 seconds.
9. Now select "Reboot device into system" and wait for your phone to power on, now once it's powered on without any problems turn it off. Now turn on your phone and wait for a purple glow then hold down the "volume down"button. Now you'll be in CWM (clock work recovery mod) Once you're here select install from zip. Locate your "phantom_modules.zip"(or the zip file, of your kernel choice) and select yes. Wait for it to be flashed and then go back and, reboot sytem.
10. From here you can flash any kernel/rom via CWM, like Thunderzap or civic. Just boot into cwm, select install from zip and locate your kernel zip file and hit install.
Credits:
- Kernel Owners.
- Sony for their kernel source
Hit thanks if this helped you out.

I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!

Noled said:
I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!
Click to expand...
Click to collapse
No probs
Well it was the first kernel for 4.2.2 and that's why I put it up instead. I know we can use the boot.img from thunderzap too but if I'm not specific enough most of the noobs wont understand. I also chose that kernel because it comes with a recovery so then you can just flash other kernels via cwm.

Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...

R.A.B said:
Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...
Click to expand...
Click to collapse
This tutorial seems pretty fine to me, so it doesn't matter
Sent from my C2104 using xda app-developers app

my flashtool exe is not detecting the .img file why?

delacruzivancarlo25 said:
my flashtool exe is not detecting the .img file why?
Click to expand...
Click to collapse
You can changed the *sin file to *img file

faizalotai said:
You can changed the *sin file to *img file
Click to expand...
Click to collapse
thanks

Sorry for noob question, but in step 9, can I skip the flashing "phantom_modules.zip" part and keep the stock kernel?
-----
Ignore this. I thought it was CWM only. I should have researched more before installing this. But I installed it and it is working good.

Xperia L 4.2.2 c105 15.3.A.1.14
Does this work with build. Umber 15.3.A.1.14 ???

MikeL. said:
Does this work with build. Umber 15.3.A.1.14 ???
Click to expand...
Click to collapse
Yes!

Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.

n78 shadow said:
Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.
Click to expand...
Click to collapse
try this to get a working recovery
http://forum.xda-developers.com/showthread.php?p=60943487
Sent from my C2105 using XDA Free mobile app

I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????

richard el renthlei said:
I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????
Click to expand...
Click to collapse
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app

Joel16 said:
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?

richard el renthlei said:
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?
Click to expand...
Click to collapse
Flash any (4.2.2) stock rom and try again. That's why your WiFi probably isn't working. Either that or you didn't flash the kernel zip file (ex thunderzap4.1.zip) after fast booting the kernel img.
Sent from my C2104 using XDA Free mobile app

WiFi now working
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?

ramkumar2000 said:
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?
Click to expand...
Click to collapse
See joels answer for details look at the post you opened
Sent from my Xperia T using XDA Free mobile app

I have a HUGE problem. Please help me ASAP!
I just flashed my Xperia L to CM 12.1. I was already on CM 12 before. So I went into recovery, wiped everything and installed the new ROM from zip. Everything worked fine except for the network signal. I was getting no network signal at all. So, when I rebooted the phone, I saw that the ThunderZap kernel was also removed. I tried to flash the kernel using flashtool, but this particular variant has 2 .img files (bootlp and bootkk). I flashed them both using the FlashtTool. Now, when I reboot my phone, all I see is the ThunderZap logo. Please help me ASAP, as this is my only primary driver phone.

[LIST] Xperia E CM11 bugs

As of now, working:
Touchscreen/Display
WiFi
Sound
Partitioning (that vold stuff thingy)
Bluetooth (turns on, but seriously unstable; I lost a song the hard way)
Radio
SIM works
CWM and TWRP (thanks for that, @UltraGamerHD)
OC to 1.3 Ghz
Proximity sensor
GSM
Stuff that bugs out:
Camera
If phone doesn't see GSM while turning on, it doesn't see GSM at all. com.android.phone crashes and ROM reboots randomly (Once again, thanks, @UltraGamerHD).
Not tested:
Compass
Thanks to UltraGamerHD, jjm34, sl3rgx, lozohcum, AshRoller, joebonrichie, ShivangDave, and anybody in the TamsuiCM11 team I've forgotten. Oh, and Cyanogen, Inc. You guys define awesome.

NSDCars5 said:
As of now, working:
Touchscreen/Display
WiFi
Sound
Partitioning (that vold stuff thingy)
Bluetooth (turns on, but seriously unstable; I lost a song the hard way)
Radio
SIM works, but if you have a single SIM phone, remove persist.multisim.config=dsds from the build.prop; otherwise you can't hang up on a call.
CWM (@Grimlock007 Where'd the TWRP come from? My build has CWM 6.0.4.7)
OC to 1.3 Ghz
Proximity sensor
Stuff that bugs out:
Camera
If phone doesn't see GSM while turning on, it doesn't see GSM at all.
Not tested:
GPS (probably works; I think I saw a GPS icon when I started the thing up)
Compass (will try ASAP)
Thanks to UltraGamerHD, jjm34, sl3rgx, lozohcum, AshRoller, joebonrichie, ShivangDave, and anybody in the TamsuiCM11 team I've forgotten. Oh, and Cyanogen, Inc. You guys define awesome.
Click to expand...
Click to collapse
@jjm34
Added TWRP and Radio
---------- Post added at 04:50 PM ---------- Previous post was at 04:49 PM ----------
UltraGamerHD said:
@jjm34
Added TWRP and Radio
Click to expand...
Click to collapse
com.android.phone stops working when there is no service.
Random Reboots

Nice but if XE receive these bugs, will tipo, miro and j have it?
Sent from my SUPER ST23i

Another bug I faced,bluetooth. After receiving a file,reboot.
So yea,basically,random reboot.

NeoTrix said:
Another bug I faced,bluetooth. After receiving a file,reboot.
So yea,basically,random reboot.
Click to expand...
Click to collapse
You have a CM11 build too?

new updates by jjm34.....
twrp
radio semi working
gsm fix
magnetometer fix pending...hsr0 is back!!

NSDCars5 said:
You have a CM11 build too?
Click to expand...
Click to collapse
May be he built it from source
Sent from my SUPER ST23i

gsm fixed, gps working ...update OP @NSDCars5

Grimlock007 said:
gsm fixed, gps working ...update OP @NSDCars5
Click to expand...
Click to collapse
And... done!

Update ???

DPxMiro said:
Nice but if XE receive these bugs, will tipo, miro and j have it?
Sent from my SUPER ST23i
Click to expand...
Click to collapse
tipo miro and J bugs will mostly be shared...E build is mostly stand-alone

Battery shows 100%
I tried flashing cm11 with 11.3.A.2.23 firmware..
I've even flashed zeus v3.1 twrp even then the battery shows 100%.

vijpgj said:
I tried flashing cm11 with 11.3.A.2.23 firmware..
I've even flashed zeus v3.1 twrp even then the battery shows 100%.
Click to expand...
Click to collapse
...
Flash 11.3.A.0.47 - 2.23 won't work properly.
Now open CM11's ZIP file. Flash the boot.img inside it as your kernel.
Now boot CWM.
Choose the option to factory reset.
Now install the CM11 ZIP file.
Now install the Gapps ZIP file.
Now, boot your phone.
No Zeus kernel needed.

NSDCars5 said:
...
Flash 11.3.A.0.47 - 2.23 won't work properly.
Now open CM11's ZIP file. Flash the boot.img inside it as your kernel.
Now boot CWM.
Choose the option to factory reset.
Now install the CM11 ZIP file.
Now install the Gapps ZIP file.
Now, boot your phone.
No Zeus kernel needed.
Click to expand...
Click to collapse
I figured it out..
Anyways thanks mate :good:

if you flash this 11.3.A.0.47 you will not have battery status problem (100%) but you lost all GSM also sim card error

@tubabuyukustun
tubabuyukustun said:
if you flash this 11.3.A.0.47 you will not have battery status problem (100%) but you lost all GSM also sim card error
Click to expand...
Click to collapse
Follow this step
1. Flash 11.3.A.0.47 ftf firmware.
2. Flash boot.img(included in the nanhu cm11 zip file) in fastboot mode using flashtool.
Boot.img file has twrp recovery included.Completely wipe the data and factory reset.
3. Copy cm11.zip and gapps file to sdcard.
4. Flash cm11 followed by gapps.
5. Restart and you'll have no problem with battery status and network.
(P.S-I'm using this rom for daily use):victory:

ok friend maybe was problem that i delete this system partition... like is on how install cm11 i go try
---------- Post added at 07:05 AM ---------- Previous post was at 06:46 AM ----------
waaaaaaaw workiiiiiiiiiing

vijpgj said:
Follow this step
1. Flash 11.3.A.0.47 ftf firmware.
2. Flash boot.img(included in the nanhu cm11 zip file) in fastboot mode using flashtool.
Boot.img file has twrp recovery included.Completely wipe the data and factory reset.
3. Copy cm11.zip and gapps file to sdcard.
4. Flash cm11 followed by gapps.
5. Restart and you'll have no problem with battery status and network.
(P.S-I'm using this rom for daily use):victory:
Click to expand...
Click to collapse
What bugs did u discovered from this rom?
Sent from my C1505 using xda app-developers app

kuugatitan98 said:
What bugs did u discovered from this rom?
Sent from my C1505 using xda app-developers app
Click to expand...
Click to collapse
Everything works except the bugs posted by @UltraGamerHD.
You can even have a transclucent status bar and even google now laucher works.
And btw the device gets heated at 1.3Ghz,Its better to use 1Ghz...

hey..when i flashed 0.47 fw and then install cm11, gsm/ril not working..how to fix this?

[Q] Xperia J not booting after CWM installation

Having trouble with my Xperia J after I rooted and installed CWM. Since then the device doesn't boot. After pressing power button it shows a 'yellow' light and then nothing happens. I then flashed it using flashtool with twrp2.4.3-jlo's boot.img and used custom ROM 'MOD_For_Z-Fusion_For_CM10'. It installs fine but SIM card is not recognized. I read somewhere about this problem and the resolution was to install a correct firmware. How can I get my SIM card read? Do I need to flash the device with another firmware?
The bootloader is unlocked and if I ever install boot.img apart from twrp2.4.3-jlo's one then the installed CWM doesn't works. Only twrp2.4.3-jlo's own recovery mode works fine.
Another major problem is that if I press volume down button and connect with the USB cable then only the BLUE color appears and FLASHTOOL reads it in fast boot. So, I am never able to set it in flash boot.
Please help me in getting my device up and running. Let me know if there are some firmware or custom rom which I can Install and get my device running.
Thanks in advance

Cloud30001 said:
Having trouble with my Xperia J after I rooted and installed CWM. Since then the device doesn't boot. After pressing power button it shows a 'yellow' light and then nothing happens. I then flashed it using flashtool with twrp2.4.3-jlo's boot.img and used custom ROM 'MOD_For_Z-Fusion_For_CM10'. It installs fine but SIM card is not recognized. I read somewhere about this problem and the resolution was to install a correct firmware. How can I get my SIM card read? Do I need to flash the device with another firmware?
The bootloader is unlocked and if I ever install boot.img apart from twrp2.4.3-jlo's one then the installed CWM doesn't works. Only twrp2.4.3-jlo's own recovery mode works fine.
Another major problem is that if I press volume down button and connect with the USB cable then only the BLUE color appears and FLASHTOOL reads it in fast boot. So, I am never able to set it in flash boot.
Please help me in getting my device up and running. Let me know if there are some firmware or custom rom which I can Install and get my device running.
Thanks in advance
Click to expand...
Click to collapse
You need to fix permissions in CWM after flashing ROM and then reboot
Sent from my Xperia J

daleksic8 said:
You need to fix permissions in CWM after flashing ROM and then reboot
Thanks a lot for the suggestion. As i mentioned, once I flash any boot.img then the CWM under recovery mode doesn't work. So, how should I fix the permission for CWM? Would it help in resolving the SIM issue too?
Thanks in advance.
Click to expand...
Click to collapse

Cloud30001 said:
daleksic8 said:
You need to fix permissions in CWM after flashing ROM and then reboot
Thanks a lot for the suggestion. As i mentioned, once I flash any boot.img then the CWM under recovery mode doesn't work. So, how should I fix the permission for CWM? Would it help in resolving the SIM issue too?
Thanks in advance.
Click to expand...
Click to collapse
Oh, did you try pressing volume down button when your LED turns yellow? And yes fixing permissions should solve SIM issue.
Sent from my Xperia J
Click to expand...
Click to collapse

daleksic8 said:
Cloud30001 said:
Oh, did you try pressing volume down button when your LED turns yellow? And yes fixing permissions should solve SIM issue.
Sent from my Xperia J
Click to expand...
Click to collapse
I was able to fix the permissions in CWM but the SIM card still didn't get detect. I have installed CM10 (FXP213) using fastboot. As per the another thread '[Q] Xperia J CM10 FXP213 - no SIM card problem by darkdonald' in XDA it looks that I need to flash back to ICS first and then proceed with FXP213 but the major problem I am facing is that my mobile device 'xperia J' isn't getting connected in flashmode. I press volume-up or volume-down the device is always detected in fastboot and in both the cases the light turn to Blue.
Click to expand...
Click to collapse

Cloud30001 said:
daleksic8 said:
I was able to fix the permissions in CWM but the SIM card still didn't get detect. I have installed CM10 (FXP213) using fastboot. As per the another thread '[Q] Xperia J CM10 FXP213 - no SIM card problem by darkdonald' in XDA it looks that I need to flash back to ICS first and then proceed with FXP213 but the major problem I am facing is that my mobile device 'xperia J' isn't getting connected in flashmode. I press volume-up or volume-down the device is always detected in fastboot and in both the cases the light turn to Blue.
Click to expand...
Click to collapse
Sorry, I dont know how to fix that one. Maybe try reinstalling drivers for flashtool
Sent from my Xperia J
Click to expand...
Click to collapse

Cloud30001 said:
daleksic8 said:
I was able to fix the permissions in CWM but the SIM card still didn't get detect. I have installed CM10 (FXP213) using fastboot. As per the another thread '[Q] Xperia J CM10 FXP213 - no SIM card problem by darkdonald' in XDA it looks that I need to flash back to ICS first and then proceed with FXP213 but the major problem I am facing is that my mobile device 'xperia J' isn't getting connected in flashmode. I press volume-up or volume-down the device is always detected in fastboot and in both the cases the light turn to Blue.
Click to expand...
Click to collapse
If you have CM 10, only flash Baseband from ICS stock ftf (check everything except Baseband, leave wipes unchecked) that worked for me.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse

Dzepar said:
Cloud30001 said:
If you have CM 10, only flash Baseband from ICS stock ftf (check everything except Baseband, leave wipes unchecked) that worked for me.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse
Thanks a lot. Yes, the baseband is showing unknown and I should fix this to get the SIM working but a major problem I am facing is that the device is never going to flash mode (so I can't use FlashTool to flash tft's). I will try to change tft firmware file to flash-able zip or search for a baseband flash-able zip file.
Click to expand...
Click to collapse

Cloud30001 said:
Dzepar said:
Thanks a lot. Yes, the baseband is showing unknown and I should fix this to get the SIM working but a major problem I am facing is that the device is never going to flash mode (so I can't use FlashTool to flash tft's). I will try to change tft firmware file to flash-able zip or search for a baseband flash-able zip file.
Click to expand...
Click to collapse
Try with different cable, and connect it to the back of pc. I had problems with original cable that comes with phone and I'm using short 10cm cable from a Nokia that i had. It's working perfectly now. About Baseband, i think it will still be unknown after flashing, but you'll have Net.
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse