Database Info

HP Ipaq h6315 Will not go into the OS - Freezes on bootup!

Hey guys!
While working on my PPC this weekend, I noticed that the system froze while just trying to open NYDITOT Virtual Display.
I tried doing a soft reset and after doing so the system freezes at the "Welcome to T-Mobile" bootup screen and it does not go into the OS (windows Mobile 2003 "Non-SE")
I tried pushing the soft reset button with the device OFF, without the battery, without the sim card, and nothing seems to work.
I cant even re-load the original ROM as Active Synch doesnt see the device due that I dont get into the OS.
Now luckely for me, T-mobile advised that i only had a 3 month warranty with them, which of course "expired" so i was hoping someone could suggest something that might help me resolve this problem.
Any help will be greatly appriciated.
Will V.

Jasjar has gone to Rom Setting & I have no installation or WM5 CD

Hi All, excuse this, I have tried everything else including the i-mate site who leave alot to be desired ( I was goin through the process of upgrading my Jasjar to WM6 & did not follow the instructions asa you do... My Jasjar has now totally reset itself back to the basic screen without windows installed so it seems, all I get is a blank unpowered screen with v1.00 at the bottom, have tried plugging it into my USB port, which just says it does not recognise it. I have also lost my WM5 CD, so can't even restore from there.. can anyone advis me what to do next.... i'm pulling my hair out (what little of it I have )
Thanks

NP
Just restart the OS load, try in with the MaUpgradeUt_noID.exe , and that is it!

Oh happy days!! Logged into the main screen this morning & there it was, reseting your device from bootloader screen.... Now to upgrade to WM6
Where would all of us Mr Average PDA users be without you guys!
Thanks

How to read my sms while touch display is broken and BA is locked?

Dear all,
I need seriously help from you. My Qtek 9090 (Blue Angel- "BA") has broken display and is locked (without password). I was one week abroad so I had to have my BA on for whole week (I was able to answer incomming calls with HW button). But now I am at home and I need to somehow read my SMS (at all 28). The phone is still on but I am unable to unlock it. Touch display is broken so it is impossible to unlock the phone (I am not able to tap or slide the button on display).
I just need to read SMS :-( Can it be done via PC by any software? I have 2 months old backup at myphone.com but it seems it doesnt help me to actualize this backup without co-operation on my BA.
I have already ordered from ebay.com new touch display but it will take about 1 month to receive it. I am also scared when I will change the display my storage from BA will be deleted :-(
My device has Windows Mobile 6.5 Build 21888
Pls help, I will be happy for any answer.
Thank you for your suggestions.

Try using MyMobiler software (link in my signature)
It will setup via just pluging in usb & runing program from PC should show you scren image allowing you to unlock via PC cursor & navigate via PC cursor & keyboard.
Refer to developers site for more details.

Thank you Mister B, I have already found My mobiler before your post here, but it really helped! Anyway thank you very much! Its great software!

[Q] Problems with my old HTC Touch Pro

Hi guys,
i have a HTC Touch Pro and I wanted to sell it.
But some times ago I put a custom firmware on it
and now i want to change it with the original firmware.
The problem is the fact that I cant connect to my mobile
over the Windows Mobile Center.
And without a Connection to Win 7 i cannot change the firmware.
Does anybody know an Advise?
It is a German phone by the way.

angeloski said:
Hi guys,
i have a HTC Touch Pro and I wanted to sell it.
But some times ago I put a custom firmware on it
and now i want to change it with the original firmware.
The problem is the fact that I cant connect to my mobile
over the Windows Mobile Center.
And without a Connection to Win 7 i cannot change the firmware.
Does anybody know an Advise?
It is a German phone by the way.
Click to expand...
Click to collapse
There is stillt the posibility to put your phone into bootscreen. just try doing a hard reset and but don't reset it. you only need to get to the screen with the red, green, blue and white bar.
If you are there, it should say "serial" on the bottom of the screen. Next step, plug your phone into usb... it should now say "usb" on the bottom of the screen.
If it says usb, you should be able to Flash any rom, even without a connection to Windows Mobile Center.
Hope it words for you!
Cause that's the way it works for me, if I can't connect.
Just let me know if it worked!
Oh by the way^^ my phone is also a German one...^^

[Q] HTC HD2 is not starting because of wp7

Hi Everyone,
I'm new in here but i'm always interested in software developments but I wasn't know anything about HTC or windows phone systems. I installed the new radio, magldr and last the new rom for windows phone 7. I started it witout problems and I tried to install programs in it with chevron. (I installed the certificate and the zune&phone developers apps to my PC) after that I couldnt install any programs to my phone because of some issue I cant understand clearly. But the main problem is, now, I cant turn on my phone. When I hit the power button nothing happens. Only when I connect it to a PC with usb or a charger it became on and after booting and the DFT screen comes out, its turning off with a light sound which is like a fuse clicking sound. Its going on like this, its resetting continuously. I can reach the magdlr screen and oem bootin screen with pushing volumedown button and I installed the whole programs again from the start but nothing changed. Please help. Thanks.

There is a forum specifically for the HD2 running WP7. You should post you question there so those experts can help you.
Sent from my SGH-i917 using XDA Windows Phone 7 App