Hey guys!
While working on my PPC this weekend, I noticed that the system froze while just trying to open NYDITOT Virtual Display.
I tried doing a soft reset and after doing so the system freezes at the "Welcome to T-Mobile" bootup screen and it does not go into the OS (windows Mobile 2003 "Non-SE")
I tried pushing the soft reset button with the device OFF, without the battery, without the sim card, and nothing seems to work.
I cant even re-load the original ROM as Active Synch doesnt see the device due that I dont get into the OS.
Now luckely for me, T-mobile advised that i only had a 3 month warranty with them, which of course "expired" so i was hoping someone could suggest something that might help me resolve this problem.
Any help will be greatly appriciated.
Will V.
Related
I upgraded our first SPVM1000 (xda2 from orange) with WM5 and it all seemed to work fine.
I then up upgraded the second and it went fine. The second one is still workign completely fine with no problems. We noticed that the first one could not get reception. If you put its sim card in the other phone then it works. Now I tried with with Orange and Vodafone sims. They work in PDA 2 but in PDA 1 there is no reception (it was working yesterday).
Then it kept coming up with an error saying that it was sorry for the inconvenience but there was an error with cprog.exe.
After a reset (power button and soft reset button) that stopped happening but then I found that I could not active sync PDA1. It cant connect and so connects as "guest". After what used to be a hard reset, everything is still as though I just did a soft reset with WM5 - not sure why.
Then I tries to backdate it to the old rom. If I use OSImage tool it wants it to be active synced which doesn't work (v3.8 or v4.0). I also tried to reupgrade with WM5 again (a fresh installation) but althoght it will go into boot mode with Serial 1.03 and then USB 1.03 appearing on the screen, the upgrade fails. It says there is a communication error.
Everything is working with PDA 2 so it cant be a connection fault. I think I did something and now I got myself in quite a pickle.
Can anyone help please?
I'd be happy to reset / reboot right back to the beginning again though I'd like to keep WM5.
Thanks
Anthony
Solution (how to hard reset in wimdows mobile 5)
Hard resetting WM5 has fixed all of these problems including the phone reception. To hard reset (sometimes called clear reset in the forums) you have to press the tape and camera buttons and then the soft reset with the stylus. This is on an XDA2 (SPVM1000) and is different since upgrading to WM5 (prev power button and the soft reset did the trick). I found lots of websites giving different instructions on how to do this but for the XDA2 type this works.
Ant
)
Hi
I am having turabul whit my mda vario 2
3 months a go I got the phone from t mobile is been came whit the windows mobile5 and I install the windows mobile 6 but I am having turabul whit it and I when to go back to windows mobile5 now I call the T-Mobile customer service they cudont help me and refer me to manufacture to solve the problem.
I tray to install the window mobile5 but is giving me turabull code 224 devise is not responding I tray to dart resetting is well but instil is running on window mobile 6.
Can you pls help me to install the window mobile5, or have to delete the rom update.
Hey Bro, you're knocking on the wrong door, this is the "Himalaya" forum you need to check out the "Wizard" Forums next door
Reply Deleted
hi! i have an imate spl which was working ok. suddenly the camera stopped working, the camera application just freezes and doesnt switch on at all. the windows mobile busy cursor just keeps running. also, the task doesnt show in any of the running applications.any help available??
Hard Reset or update software if it fails stil could be hardware failure
Im screwed!
tried ahard reset. attempted a rom upgrade. went fine....but had a power cut in between so my phone now shows a white screen which says update again, connect usb and wait. any way to get around that? i have my limited warranty intact. will this cover it? it was an official rom i tried to upgrade to, by the way. can u help?
Hi Guys,
I have a strange question for you.
I have an Xperia X2 phone (not hacked or anything) and today, the phone froze, restarted and it seems like it lost the custom SonyEricsson software which was on it and reverted to the basic Windows Phone 6.5 software. However, for instance, Office Mobile is not working, and file explorer hangs sometimes, not to mention that I miss the user interface as some of the buttons won't work without the custom software.
So, I took a deep breath and tried to hard reset the device, however, it didn't go as I planned.
I've tried the following, all to no avail:
-Settings/System/Memory, I reckon it has a third tab to start the hard reset (Main, Storage card and ...Clear user settings?), however, now it only shows two tabs...
-followed the reset steps (inserted stylus, held the power button)
-installed a custom hard reset application from handango
-initiated a wipe from my Exchange mailbox
Whatever I do, it just simply boots back the corrupted version of the OS.
Do you have any idea how could I hard reset the phone to have the OS reinstalled with the custom extensions?
many thanks!
gyorgy
Hello.
I have this device for more than two years and after changing sim card it wont boot. It was stuck at Windows Mobile boot picture which after waiting went black. After allot of rebooting (including clean reboot) sometimes it started up but was slowed down like snail. I was able to update it from OS-v1.00.03 to OS-v1.01.04 and from FW-v0.81 to FW-v0.88.
After that it boot up more often but is still awfully slow. Now I was trying to find update to wm6.5 hoping this would help but with no success (factory recovery didn't work either).
I am out of ideas what to do to get it running back again. Can someone give me directions what to do (if this is even possible to fix)?
Edit01:
I have been able to upgrade to "23562 Beta 37 by kioeved". After upgrading, first boot stopped at Windows boot screen. After few rebooting system started (slowed down) barely. I am getting feeling that this is hardware problem but I don’t know how to determine that.
PROBLEM SOLVED!!!
I take it to service and they send it to HP. After a month I received new device free of charge. I have upgraded to wm6.5 nad it looks good.
I was updating my phone from windows mobile 6.1 to one of Ryan Moguls 6.5 updates today. Everything worked alright, it turned on, loaded everything, but only stayed on for about a minute. After soft resetting it a few times it is now stuck on the three colored screen. I've tried hard resetting it (the prompt comes up, I hit yes), but then it just goes back to the same three colored screen. The screen says:
TITA100
SPL-1.2.Olipro
& then at the bottom it says Serial.
I've tried putting wm 6.1 back on it, but I keep getting error 290.
I would REALLY love some help!
I managed to use the microSD method to get windows 6.5 & the needed radio for it. My problem now is that it is stuck in a reboot loop. It'll stay on for about a minute and then reset. I figure it is because I need olipro 2.40, but i have a 64-bit computer that won't support it. Any suggestions?