I was updating my phone from windows mobile 6.1 to one of Ryan Moguls 6.5 updates today. Everything worked alright, it turned on, loaded everything, but only stayed on for about a minute. After soft resetting it a few times it is now stuck on the three colored screen. I've tried hard resetting it (the prompt comes up, I hit yes), but then it just goes back to the same three colored screen. The screen says:
TITA100
SPL-1.2.Olipro
& then at the bottom it says Serial.
I've tried putting wm 6.1 back on it, but I keep getting error 290.
I would REALLY love some help!
I managed to use the microSD method to get windows 6.5 & the needed radio for it. My problem now is that it is stuck in a reboot loop. It'll stay on for about a minute and then reset. I figure it is because I need olipro 2.40, but i have a 64-bit computer that won't support it. Any suggestions?
Related
Hey guys!
While working on my PPC this weekend, I noticed that the system froze while just trying to open NYDITOT Virtual Display.
I tried doing a soft reset and after doing so the system freezes at the "Welcome to T-Mobile" bootup screen and it does not go into the OS (windows Mobile 2003 "Non-SE")
I tried pushing the soft reset button with the device OFF, without the battery, without the sim card, and nothing seems to work.
I cant even re-load the original ROM as Active Synch doesnt see the device due that I dont get into the OS.
Now luckely for me, T-mobile advised that i only had a 3 month warranty with them, which of course "expired" so i was hoping someone could suggest something that might help me resolve this problem.
Any help will be greatly appriciated.
Will V.
I upgraded our first SPVM1000 (xda2 from orange) with WM5 and it all seemed to work fine.
I then up upgraded the second and it went fine. The second one is still workign completely fine with no problems. We noticed that the first one could not get reception. If you put its sim card in the other phone then it works. Now I tried with with Orange and Vodafone sims. They work in PDA 2 but in PDA 1 there is no reception (it was working yesterday).
Then it kept coming up with an error saying that it was sorry for the inconvenience but there was an error with cprog.exe.
After a reset (power button and soft reset button) that stopped happening but then I found that I could not active sync PDA1. It cant connect and so connects as "guest". After what used to be a hard reset, everything is still as though I just did a soft reset with WM5 - not sure why.
Then I tries to backdate it to the old rom. If I use OSImage tool it wants it to be active synced which doesn't work (v3.8 or v4.0). I also tried to reupgrade with WM5 again (a fresh installation) but althoght it will go into boot mode with Serial 1.03 and then USB 1.03 appearing on the screen, the upgrade fails. It says there is a communication error.
Everything is working with PDA 2 so it cant be a connection fault. I think I did something and now I got myself in quite a pickle.
Can anyone help please?
I'd be happy to reset / reboot right back to the beginning again though I'd like to keep WM5.
Thanks
Anthony
Solution (how to hard reset in wimdows mobile 5)
Hard resetting WM5 has fixed all of these problems including the phone reception. To hard reset (sometimes called clear reset in the forums) you have to press the tape and camera buttons and then the soft reset with the stylus. This is on an XDA2 (SPVM1000) and is different since upgrading to WM5 (prev power button and the soft reset did the trick). I found lots of websites giving different instructions on how to do this but for the XDA2 type this works.
Ant
)
Hi
I am having turabul whit my mda vario 2
3 months a go I got the phone from t mobile is been came whit the windows mobile5 and I install the windows mobile 6 but I am having turabul whit it and I when to go back to windows mobile5 now I call the T-Mobile customer service they cudont help me and refer me to manufacture to solve the problem.
I tray to install the window mobile5 but is giving me turabull code 224 devise is not responding I tray to dart resetting is well but instil is running on window mobile 6.
Can you pls help me to install the window mobile5, or have to delete the rom update.
Hey Bro, you're knocking on the wrong door, this is the "Himalaya" forum you need to check out the "Wizard" Forums next door
Reply Deleted
Hi.
My phone shows strange behavior now 2 times in a row: After some time, i suddenly get an error, that some exe wasnt found and i cannot start any application, the start menu gets empty, etc.
It's like he cannot access the hard-drive ( ) anymore, just like what happens if you turn your hard-disk off while xp is still running (try it, its fun!)
Afterwards, i cannot get past bootscreen if i soft-reset. ONLY a hard-reset or reflashing works.
I remember, that i didn't always did a hard-reset after flashing a new rom, could this MAYBE be the issue? I flashed my phone after the first incident and now did a hard reset after the second one.
Hi there guys .
I've been searching and searching, and trying and trying, but I can't seem to get past this Error [262] when I'm trying to upgrade my ROM or Radio (HTC Diamond).
What I'm doing is this basically:
I downloaded DiamonCustomRUU.exe, put it in a folder with the radio/rom (say Diamond_Radio_1.00.25.05.nbh), I connect my HTC Diamond to my pc via usb, activesync is on, I start up the RUU, go through all the steps, then at the end when the update 'starts', my phone goes off, starts up in the 4 coloured screen, activesync stops, then my phonescreen turns grey with the progress bar (stuck at 0%), and on my laptop there's a progress bar as well. It does nothing, and after about 5 minutes, I get the Error [262].
I reinstalled Activesync, but no changes. I installed HardSPLL though. I tried another USB-port, doing it without my firewall on (someone suggested it, yes I'm desperate)... I have no idea where to go from here.
Can anyone help? (sorry if this is the wrong section..)
Love
Had the normal (signed)SPL instead of the hardSPL. Can be locked
I have an 8125 laying around that I'd like to turn into a ZuneHD type device..
No phone, no text message, no mms, no email, etc..
Keep WiFi, PIE, games, media player, etc..
Is there a good ROM of choice for this?
Thanks
-Matthew
Here, try this one:
http://forum.xda-developers.com/showthread.php?t=501941
When I try to flash a rom:
when the phone resets to get to the 3-color boot screen, my computer loses sync with it and the RUU program locks up.. How do you keep your computer connected so it doesn't think it has been unplugged?
Even though it is still plugged in and I see USB over the left softkey, when I restart RUU, it then locks up when it is trying to scan my phone (it doesn't see it I guess)..
I'm on Vista Ultimate 64..
How do I get around this?
Thanks
-Matthew
I finally just pulled out my old XP machine from the attic.. Much quicker, nothing in Vista worked..
However, even after the RUU ran, the phone booted right back into the old OS..
?
EDIT: got it!
Now to put that 4G miniSD card in and fill it with tunes..
Is there a way to totally disable the phone functions altogether? Right now it boots into the dialer saying 'no SIM card'.. I would rather have it go straight to the WM6.5 today screen..
-Matthew