Dear all,
I need seriously help from you. My Qtek 9090 (Blue Angel- "BA") has broken display and is locked (without password). I was one week abroad so I had to have my BA on for whole week (I was able to answer incomming calls with HW button). But now I am at home and I need to somehow read my SMS (at all 28). The phone is still on but I am unable to unlock it. Touch display is broken so it is impossible to unlock the phone (I am not able to tap or slide the button on display).
I just need to read SMS :-( Can it be done via PC by any software? I have 2 months old backup at myphone.com but it seems it doesnt help me to actualize this backup without co-operation on my BA.
I have already ordered from ebay.com new touch display but it will take about 1 month to receive it. I am also scared when I will change the display my storage from BA will be deleted :-(
My device has Windows Mobile 6.5 Build 21888
Pls help, I will be happy for any answer.
Thank you for your suggestions.
Try using MyMobiler software (link in my signature)
It will setup via just pluging in usb & runing program from PC should show you scren image allowing you to unlock via PC cursor & navigate via PC cursor & keyboard.
Refer to developers site for more details.
Thank you Mister B, I have already found My mobiler before your post here, but it really helped! Anyway thank you very much! Its great software!
Related
my PDA2k digitizer broken, I got over this issue by installing cursor program the point is that I already installed the new WM version but after the installation the first question was to tab the screen to start the alignment, so is their any solution for solving this problem (using buttons in a systematic way )or give any suggestions to get over this problem
Can you connect to activesync and then use remote control software to emulate align screen setup?
Please change the title of your post to something useful. "Please help" is not helpful.
V
Can you connect to activesync and then use remote control software to emulate align screen setup?
where i can get this SW from? can you help?
Thanx a lot for your consideration
Various places, but I think an easy option is the Remote Control app by Microsoft.
It's old but it works.
http://www.microsoft.com/downloads/...27-9172-4BF2-A4AF-DFA4FC6E8BA1&displaylang=en
V
as per your advice i already instaleed the SITO Remote controller but the problem that to finalize the installation process i have to complete the installation through the phone but i cant , i tried even to use buttons blindly but it seems even that the buttons is not yet installed so i cant even use them but the phone is working i'm receiving calls but the problem that i cant see any thing but the alignement screen, is their any help?
forgot to tell you that i'm using WM 2005 -1.12-1337.42-5.04.06
Hi Folks,
I know, there are so many postings about problems with the Palm 750v and Blackberry Connect. But because I desperately need help and I can not find a solution for my problem, I raise this question again.
My device:
Treo 750v from Vodafone Germany
Software-Version: TREO750-1.16-VFD (latest one)
Firmware: 1.12.0c.00
For Blackberry I am using the software which Palm and Vodafone promote on their homepage.
Blackberry-Version: 2.1.1.31
My company has an Enterprise server an everything is set-up properly.
NOW THE PROBLEM:
Once it starts connecting to the server, after the message DatecTunnel is available it is going to turn to: NO CONNECTION and this is not going to change.
By the way, the PIN is generated without any problem or failure again.
Pls Folks try to help me, because otherwise my destiny will be that I will be forced by the company to change to a BB device :-( So guys, this is a real emergency case.
Looking forward to your kind reply.
Bye
Dirk
dhuels said:
Hi Folks,
Treo 750v from Vodafone Germany
Software-Version: TREO750-1.16-VFD (latest one)
Firmware: 1.12.0c.00
For Blackberry I am using the software which Palm and Vodafone promote on their homepage.
Blackberry-Version: 2.1.1.31
Click to expand...
Click to collapse
With firmware 1.12.0c you have to use the client 2.1.2.52 attached in this thread:
http://forum.xda-developers.com/showthread.php?t=304670
Hi, thanks for your suggestion. I tried it, but it did not work either.
Any other idea ? I am getting mad about that.
Thanks in advance for your kind help.
Dirk
Hi, I re-install everything, soft reseted and now it connects. This is the first step, but still I can not receive and send any mail. Any idea ?
You have to cradle the device with the BlackBerry Desktop Configuration Tool for Windows Mobile on a PC within your company network. This way you connect to your companys BES and get the service books you need.
Sorry, maybe I did not mentioned it. I did this already, but still, no success.
maybe I have to use a different version as well ?
Do you have service books on the device? Check the settings in start >> system >> blackberry.
Normally when you start the BB connect desktop and click on connect, you have to generate a key by moving the mouse. Then your calendar is loaded to the device. Did that happen?
Yes, services are booked. I generated the key and calender was loaded. that is all fine. but still no emails are delivered
Delete the service books (should be 3: ALP, CMIME and CICAL). Then cradle the Treo again and click on connect. Calendar is loaded and key generated.
Plug out the device and make sure that no other programs as Active Sync or Internet Explorer are running in the background (check in task manager on the Treo). Then go to blackberry settings and use the option "register now"
Did it, but no change. The only thing I realized, that a key was not generated, by moving the mouse, because system did not asked for it. But when I see the BB Desktop Software, my PIN is still there. Maybe how to clean the BB Desktop Software ? I de-install and install it again, but the PIN is still there. Does it has something to do with that ?
To make sure that everything is fine on your side, do the following:
Uninstall the Desktop Configuration tool.
Then install this version:
http://sems.org/content/download/bbc4/activesync_bbconnect_desktop_setup_4.0.0.17.zip
Don' t use the default path, change it to another one.
Uninstall the BB client from Treo.
When asked if you want to preserve configuration settings, check no.
Reboot the Treo.
Install the BB client again.
Reboot the Treo and when you are connected do register now.
Then cradle the Treo to the new desktop tool and click configure wireless device.
If you still get no emails then, there is a problem with the settings of your user on the BES and you should contact your BlackBerry administrator.
Hi !
I checked with my Admin and with Vodafone. Finally it was a problem on Vodafone side.
That is the comment from VF: I have checked the Phonenumber. The User uses a Palm-Device, and on the RIM-Database, was the Device a Prosumer-Device.
So I changed the settings on the RIM-DB, and resend the necessary Servicebooks. The Device should work better now (maybe make a Softreset from the Palm)
After that and a soft reset all works great.
Thanks for your kind help, which I appreciated a lot.
Dirk
dhuels said:
Hi !
I checked with my Admin and with Vodafone. Finally it was a problem on Vodafone side.
That is the comment from VF: I have checked the Phonenumber. The User uses a Palm-Device, and on the RIM-Database, was the Device a Prosumer-Device.
So I changed the settings on the RIM-DB, and resend the necessary Servicebooks. The Device should work better now (maybe make a Softreset from the Palm)
After that and a soft reset all works great.
Thanks for your kind help, which I appreciated a lot.
Dirk
Click to expand...
Click to collapse
Hi can you explain how you changed the RIM-DB settings? I have the same issue changing from an E61 trying to setup a Voda 750v
RFBakeruk said:
Hi can you explain how you changed the RIM-DB settings? I have the same issue changing from an E61 trying to setup a Voda 750v
Click to expand...
Click to collapse
Sorry, I can not tell you, because my ADMIN did that in co-operation with VF. But it seems, that if at VF side your device is registered as a BB it will not work, therefore there must change it. Call your ADMIN and VF and tell them that you are running the BB service with a WM device and tell them it's a PALM Treo.
Hi folks
I'm waiting on a nice shiny new Samsung Omnia arriving from my mobile provider, but in the meantime I'm still using my old HTC Trinity handset... and have managed to break the screen on it. I'd love to recover my data, but ActiveSync hasn't managed to get my contacts into Outlook and I don't think it can get my SMS.
Any ideas on how I can recover my data, preferably in a way that I can then put it onto the new Omnia when it arrives?
Thanks in advance for help everyone!
Uso SOTI controller or whatever it's called to see the PPC screen on the PC screen. Navigate using PC mouse etc.
HTH
Joe
joebongo said:
Uso SOTI controller or whatever it's called to see the PPC screen on the PC screen. Navigate using PC mouse etc.
HTH
Joe
Click to expand...
Click to collapse
QFT. Use SOTI Pocket Controller (which you can download a trial for free from SOTI's website) and you can control your PPC on your PC's screen.
^^ What they said, but use MyMobiler (which is free forever ) from here.
Also you should be able to use ActiveSync/Explore to install DotFred's PPCPimBackup (here) - it's just an .EXE you need to copy somewhere on your Trinity, then run it (using the MyMobiler screen to guide you) and backup all your contacts and SMS messages (and calendar, tasks etc. if you wish) - if you have a lot of contacts/messages, make sure you un-tick the "use memory for temporary files" option.
The resultant backup file can then be copied back to your desktop PC and you can perform the reverse operation - with or without the help of MyMobiler - when your Omnia arrives.
Cheers,
Mark.
I am in the same situation.
I had an Eten device before and now have a Diamond.
The problem is that the screen is broken and most (all ?) of the controlling apps need a software PPC-side, and without screen it's quite hard to install.
As long as MyMobiler can establish an ActiveSync-type connection with the phone (i.e. if you've got the phone and PC connected via A/S) you'll be fine - MyMobiler will install the software on the phone itself....I don't even think it asks any questions.
Mark.
Mark Crouch said:
^^ What they said, but use MyMobiler (which is free forever ) from here.
Also you should be able to use ActiveSync/Explore to install DotFred's PPCPimBackup (here) - it's just an .EXE you need to copy somewhere on your Trinity, then run it (using the MyMobiler screen to guide you) and backup all your contacts and SMS messages (and calendar, tasks etc. if you wish) - if you have a lot of contacts/messages, make sure you un-tick the "use memory for temporary files" option.
The resultant backup file can then be copied back to your desktop PC and you can perform the reverse operation - with or without the help of MyMobiler - when your Omnia arrives.
Cheers,
Mark.
Click to expand...
Click to collapse
Thanks, I'd not heard of MyMobiler but I just downloaded it and it connects to my phone quickly and automatically without even having to set it up in the first place. Nice one.
Hi. I accidently cracked the screen on my s740 and now i need to extract my sms from the phone. I have already installed my mobile, but the damn program doesent seem to work. I have win xp, but when the phone syncs to my computer, my mobile says: "Not connected" -> "Connecting" -> "Running on your mobile" -> "Not conneted".
It is slow as hell and doesent respond in windows, it doesnt seem to be able to connect to my phone.
So, here is the deal, my screen is busted, and i have a very important sms in my phone that i HAVE to extract from the phone.
So, can i copy some file from the phone, containing all the smses and then extract in windows on my computer? If not, how am i supposed to do? PIM Backup can only be run on the phone and my screen is cracked.
Please HELP!
IT IS URGENT!
3600 said:
Hi. I accidently cracked the screen on my s740 and now i need to extract my sms from the phone. I have already installed my mobile, but the damn program doesent seem to work. I have win xp, but when the phone syncs to my computer, my mobile says: "Not connected" -> "Connecting" -> "Running on your mobile" -> "Not conneted".
It is slow as hell and doesent respond in windows, it doesnt seem to be able to connect to my phone.
So, here is the deal, my screen is busted, and i have a very important sms in my phone that i HAVE to extract from the phone.
So, can i copy some file from the phone, containing all the smses and then extract in windows on my computer? If not, how am i supposed to do? PIM Backup can only be run on the phone and my screen is cracked.
Please HELP!
IT IS URGENT!
Click to expand...
Click to collapse
Try this...right click on the my mobiler icon in your pc's taskbar, choose "configure mobile", then "install". Sometimes I've had to manually force that step to get it to allow connection.
EDIT: also, is it making a solid activesync connection to begin with?
Reviving an old thread
What happens if I can't make an activesync connection? I think at some point I disabled the auto-connect on the phone and now it may require my input to connect.
(Its an elfin with one of the latest onyx roms)
Well I have managed to break my touch screen on my 02 XDA Orbit , not a big problem as I have a spare XDA Orbit.
The problem is I need to access to the broken one, the phone powers up into the unlock screen, but I cannot get any further due to the touch screen being dead .
I have loaded mymobiler onto my PC to try to control it through that. The program requires an acknowledgment on the phone so that the application is installed, cannot acknowledge this because of the broken touch screen.
I would like to know if there is anyway of unlocking the touch screen, so that I can control the phone using keys or through mymobiler.
Any help is appreciated, I have used the search engine and google, but cannot find if it is possible.
For what purpose do you want to access the phone?
If you got a spare LCD-Display, just replace the old one and you can acces the device.
Or does your data get lost if you take out the battery?
Another solution for exporting contacts and other data is Jeyo Mobile Companion. So you can save your data and repair the device afterwards.
For disassembly solution visit Mike's site: www.mikechannon.net
greetz
playdo
Thanks for the reply. I have several applications on the phone that I need info from, so that I can register them on the new phone.
I do not want to remove the screen from the working phone just to get at the stuff I need. I might end up with two broken phones
There must be a simple way of deactivating the screen lock feature
dear all,
i got this mobile a couple of weeks ago and try to get some useful soctware and soome doubt still confuse
. can someone tell how to activate front camera? i cannot find in camera settings.
. can somewhere find rom updatable?
. can someone use myphone {mocirosoft} successful to synchonized your data to your intenet mail account, such as hotmail? i try it many time {>100tims} but still not working...
thanks in advance
you can test front camera. Just enter *#0*# and you see LCD TEST MENU when you press 8 (VT camera test) you will see yourself on the screen(full screen view.):
Front camera can be used when 3G connection is available. if you see 3G writing on the screen then you can make video calling by clicking menu for a contact.
Another way for front camera is VZO Mobile Video Phone program.
http://mobile.vzochat.com/en/
There is no any rom update yet
and you can have a look at http://b7320.blogspot.com/
thanks seagleye,
i will view the website your recommand
You guys know any free useful apps for this phone? I'm having a hard time searching for non-touch screen phones. I used to have a 6.1 PRO on another phone almost all apps run on it
Hi.
Anybody knows how to put B7320 into bootloader mode? Thank you in advance.
For normal B7320, here are the procedure
Turn off the phone
Press and hold 'J' button while connecting to the PC through USB. Keep hold the 'J' button.
The phone should enter bootloader screen
But if your phone is updated with AT&T Win 6.5 ROM for SGH i-637 Jack, I'm afraid above steps won't work because of the updater messed up with boot area
help help!!!
buddy i m facing the same thing......n ofcourse i flashed it with ATnT jack update......how do i put it on boot loder please help.........
sarthak.herbi said:
buddy i m facing the same thing......n ofcourse i flashed it with ATnT jack update......how do i put it on boot loder please help.........
Click to expand...
Click to collapse
When you are start your phone, you can see anything on your phone display!!!
like SAMSUNG name logo !!!
if you can't see anything.. like a black screen... you must need to replace them main board..... if you are under the warranty, you are lucky.... if you are not under warranty... need more credit for changing this main board!!!!
No any option for making your device well for you, if your display is black