my PDA2k digitizer broken, I got over this issue by installing cursor program the point is that I already installed the new WM version but after the installation the first question was to tab the screen to start the alignment, so is their any solution for solving this problem (using buttons in a systematic way )or give any suggestions to get over this problem
Can you connect to activesync and then use remote control software to emulate align screen setup?
Please change the title of your post to something useful. "Please help" is not helpful.
V
Can you connect to activesync and then use remote control software to emulate align screen setup?
where i can get this SW from? can you help?
Thanx a lot for your consideration
Various places, but I think an easy option is the Remote Control app by Microsoft.
It's old but it works.
http://www.microsoft.com/downloads/...27-9172-4BF2-A4AF-DFA4FC6E8BA1&displaylang=en
V
as per your advice i already instaleed the SITO Remote controller but the problem that to finalize the installation process i have to complete the installation through the phone but i cant , i tried even to use buttons blindly but it seems even that the buttons is not yet installed so i cant even use them but the phone is working i'm receiving calls but the problem that i cant see any thing but the alignement screen, is their any help?
forgot to tell you that i'm using WM 2005 -1.12-1337.42-5.04.06
Related
for you IM+ users out there...i'm having a big problem getting this to run properly on my Touch. I've used it before on my MDA and Wing with no issues at all, except the ocassional disconnect. Here's the problem: when i pull up the soft keyboard to type, the screen does not format correctly (i.e., the chat box is behind the keyboard) and when I attempt to close the keyboard, part of it stays open and i'm not still not able to see the chat window. It's basically nonfunctional like this. I've tried older versions and have had the same issue. Is this a problem with non-sliding keyboard phones? any help would be appreciated as I really love this program and want to continue using it.
the only program i've found that can compete with IM+ is Palringo..but I have a problem with getting disconnected and getting the error message "you've been connecting and disconnecting." anyone know a fix for this as well?
yea i have the same problem with IM+
it touchflo breaking it i built my own rom to fix it pm me if u need it
Hi everyone.
After much searching I seem to have got nowhere. Can someone please help.
My mda compact 2 starting playing up yesterday, rebooting on its own, so I tried to install the upgrade from tmobile (ruu charmer). The upgrader stopped and my mda now has a screen that only either says serial v1.02 or usb v1.02.
I've tried rebooting it several times in several different ways without any joy, the screen just remains the same. I tried connecting to my laptop via active sync, but its like it doesn't exist anymore!
I'm about to give up after hours of trying to fix it, so any assistance in very simple terms would be much appreciated!
problem solved
Seems like my problem must have been too basic or too common for anyone to bother to help, so I did some searching myself throughout this site and elsewhere.
However, what I found was thoroughly misleading and unhelpful.
The error messages are also inaccurate and totally misleading. Error 274 might mean pc can't connect to pda, but it also means other things, like your using the wrong upgrade firmware!!. Having serial v1.02 or usb v1.02 on your screen does not mean its a grey and black brick(useless), its simply the upgrade mode screen.
Basically, I made an error in choosing my upgrade. I chose the wrong firmware package from t-mobile thinking what I had was a mdacompact 2, when it actually was just a mda compact. This error was the main issue, yet from this forum I had the idea it could have been a number of things.
One important thing to remember is adhering to all the instructions regarding the installation of the new rom.
Don't bother unless you do the following:
1) Make sure you have a good connection via cradle or usb lead when doing the download.
2) Make sure you close all unnecessary programs on your pc.
3) Dont touch either your pc or the mda during installation.
4) Don't give up after you read misleading rubbish on the web.
5) Make sure you download from the web the correct upgrade firmware!!(very important in my case!)
6) Active sync is not totally necessary during the process.(I turned off usb connection in its setting during my installation).
Hey
I have the same Problem
i tried updating the software on the phone but now i get that screen..
Im still stuck on what exctly to do, I've been googling it for hours!! HELP!!!
matty x
Hello,
Does anybody had the screen aligment data for the HP iPaq H43xx?
Or does anybody can take a look in his registry.
install a registry editor (like PHM registry editor).
You can see it under: HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
and than CalibrationData, where you van see al lot of numbers. that is the data.
Or you can install http://www.codefactory.es/descargas/family_1/product_3/MSP_RemoteAlignment.zip (remote screen aligmnet, where you can recieve the information, and it will set it in the folder where Remote screen aligment has been installed. Tha file is called Callibration.dat (or something like that).
Kind regards,
Vincent
Edited so maybe it is easyer to recieve the data with Remote Screen Alignment (from Code Factory).
Anybody? it would me amazing is someone can help me.
Vincent
out of curiosity whats stopping you entering it maually
I connect my PDA to the computer, and then i use a remote control to insert it manually.
And i cannot use Align screen, because my screen is broken, and before i also did it by manualy, but i lost the data.
Vincent
aahhh why didnt you say so?
all you need is either an app called my mobiler or everywan
these will show you the device onthe screen so you can align it that way
although im confused as to why you aliging the screen as if you screen is broken then you cant use the touchscreen anyway
Everywan remote can be found here
http://www.sparus-software.com
Used both. But it doesn't work.. i can't allign the screen by software..
because the touchpad have to reconize the point for the data.
It is just a little broke in the screen.. but it is at the point where i have to align the screen. so.. Anybody else can send me the data?
I really need it.
Regards,
Vincent
Anybody? who can take the few minutes to take a look?
Vincent
I've had my Touch Pro for a while now but I've always had one problem with it that is pretty darn annoying, & that is that the phone seems to auto-unlock when I'm receiving calls. And so, many times the phone has answered the call in my pocket & I've had no idea. Or worse yet, it's cancelled the phone call without me getting round to even take the phone out of my pocket. I wondered if there was any fix for this.
I'm pretty damn sure that I've seen this problem before when roaming around here & PPCgeeks but after spending the past half hour or so trying to look for a fix, I just can't seem to find one. And so, I knew that if I just posted a thread that someone would most likely be able to help me & it'd all be alot easier than me spending all day trying to find whatever it is I need.
Oh, & before you ask, I've not got any custom ROMs or anything on my phone. I've installed apps from here, & some other stuff, but it's all just on the standard XDA Serra ROM.
you could install the Tachi dialer which gives a sliding mechanism if answering the phone
or swtich on auto lock after backlight dim
Free program called slide to unlock "s2u2" will work, also, you can download the program Advanced Configuration, and there is an option to allow the default slide lock that is built into windows mobile. The screen will still light up, but, unless you unlock the screen, it won't answer the call.
S2U2 Thread on XDA>>>> http://forum.xda-developers.com/showthread.php?t=527523
Advanced Configuration Utility Thread on XDA>>>>> http://forum.xda-developers.com/showthread.php?t=317070
I tried the Advanced Configuration Utility program but whenever I try to load the program (obviously after installing it), I get an error message saying:
An unexpected error has occured in AdvancedConfig.exe.
Select Quit & then restart this program, or select Details for more information.
This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.
Click to expand...
Click to collapse
Clicking 'Details' doesn't seem to do anything, except give me the 2nd paragraph from above (about the .NET framework).
Where can download this ".NET Compact Framework", or does anybody know of any other programs/applications/utilities/whatever which can help me with this problem.
Oh, & yeah, thanks for the help guys.
Net Compact Framework v3.5
http://forum.xda-developers.com/showthread.php?t=432470
Alright well I installed that & I'm still getting error messages when trying to load the Advanced Configuration Utility program. However this time instead I just get:
An unexpected error has occured in AdvancedConfig.exe.
Select Quit & then restart this program, or select Details for more information.
Click to expand...
Click to collapse
And then if I click Details I get:
AdvancedConfig.exe
Exception
at
Microsoft.AGL.Common.MISC.HandleAr()
at
System.Windows.Forms.ImageList.ctor()
at AdvancedConfig.□.□()
at AdvancedConfig.□..ctor()
at AdvancedConfig.□.□()
Click to expand...
Click to collapse
So yeah, there's still some kind of problem. Though what it is exactly, I do not know.
try attached CAB and have a look at below thread.
http://forum.xda-developers.com/showthread.php?t=425650
Google Pocketshield. Great program.
Dear all,
I need seriously help from you. My Qtek 9090 (Blue Angel- "BA") has broken display and is locked (without password). I was one week abroad so I had to have my BA on for whole week (I was able to answer incomming calls with HW button). But now I am at home and I need to somehow read my SMS (at all 28). The phone is still on but I am unable to unlock it. Touch display is broken so it is impossible to unlock the phone (I am not able to tap or slide the button on display).
I just need to read SMS :-( Can it be done via PC by any software? I have 2 months old backup at myphone.com but it seems it doesnt help me to actualize this backup without co-operation on my BA.
I have already ordered from ebay.com new touch display but it will take about 1 month to receive it. I am also scared when I will change the display my storage from BA will be deleted :-(
My device has Windows Mobile 6.5 Build 21888
Pls help, I will be happy for any answer.
Thank you for your suggestions.
Try using MyMobiler software (link in my signature)
It will setup via just pluging in usb & runing program from PC should show you scren image allowing you to unlock via PC cursor & navigate via PC cursor & keyboard.
Refer to developers site for more details.
Thank you Mister B, I have already found My mobiler before your post here, but it really helped! Anyway thank you very much! Its great software!