Database Info

[Q] If I have VRBMB1 can I flash a rom that is VRBMF1?

Sorry, I'm a total noob. I don't really understand how the "Baseband Version" factors into the ROM/phone operation. Can someone explain it? I have a pretty good understanding of computers but when it comes to the phone it seems very black-boxy -- I'm still learning. My underlying question is:
The BoneStock ROM says: "BoneStock v3.0 (VRBMF1) 6/23/13", my phone currently has VRBMB1. Can I flash the BoneStock ROM on my phone or do I need to upgrade the Baseband Version somehow before I do that? I saw links to different revisions on the BoneStock thread but there isn't a whole lot of explanation about how to use them.
Thanks,
-Greg

Yes No problems. I ran mb1 on bonestock.
Sent from my SCH-I535 using xda premium

bbqsfire said:
Yes No problems. I ran mb1 on bonestock.
Click to expand...
Click to collapse
Cool, do you know what the Baseband firmware does? Should I flash my firmware to VRBMF1?

I flashed mine mf1 because it really did help signal and data speeds. In my opinion it is worth it to flash the mf1
Sent from my SCH-I535 using xda premium

bbqsfire said:
I flashed mine mf1 because it really did help signal and data speeds. In my opinion it is worth it to flash the mf1
Click to expand...
Click to collapse
Did you flash it before flashing BoneStock or does it matter what the order is?

Modem has no relation to what ROM you are on. You can flash whichever you want first, doesn't matter.
Sent from my SCH-I535 using Tapatalk 4 Beta

Hi, please PM me MB1 and MF1.
Thanks,

Camera not working on ANY rom

Hi All
I have been having issues with my camera, which I thought were strictly issues with cm10.1.2 and nightlies...but I have flashed liquid and clean stock rom (rooted), and have the same issue.
when I try to use the camera, i get error. Warning: Camera Failed, on other roms I was getting Camera Error: camera unable to to connect ...failed error...not sure what to do here All the kernels change when the roms change..
radio is MF1

cevil203 said:
Hi All
I have been having issues with my camera, which I thought were strictly issues with cm10.1.2 and nightlies...but I have flashed liquid and clean stock rom (rooted), and have the same issue.
when I try to use the camera, i get error. Warning: Camera Failed, on other roms I was getting Camera Error: camera unable to to connect ...failed error...not sure what to do here All the kernels change when the roms change..
radio is MF1
Click to expand...
Click to collapse
So you're on a mf1 stock rooted rom?
Try to flash a recent custom kernel.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
So you're on a mf1 stock rooted rom?
Try to flash a recent custom kernel.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I just tried flashing both leankernal (TW) and KT747 (TW)...same problem on both . And yes mf1 rooted stock

cevil203 said:
I just tried flashing both leankernal (TW) and KT747 (TW)...same problem on both . And yes mf1 rooted stock
Click to expand...
Click to collapse
This is different than what I've seen, have you flashed the newest cm10 nightly and gave it a go? Everything sounds like it should be working. I know a lot of nightlies have been giving people camera issues.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
This is different than what I've seen, have you flashed the newest cm10 nightly and gave it a go? Everything sounds like it should be working. I know a lot of nightlies have been giving people camera issues.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I've tried the newest nightly, 10.1.2, liquid smooth, clean rom (stock rooted)...multiple kernals...reflashed mf1, fixing permissions....nothing is working...i'm lost at this point.

cevil203 said:
I've tried the newest nightly, 10.1.2, liquid smooth, clean rom (stock rooted)...multiple kernals...reflashed mf1....nothing is working...i'm lost at this point.
Click to expand...
Click to collapse
Have you gone completely back to stock with Odin? I'm confused if you used a stock rooted rom or cleanRom.
If an odin back to stock doesn't work I'm out of ideas.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
Have you gone completely back to stock with Odin? I'm confused if you used a stock rooted rom or cleanRom.
If an odin back to stock doesn't work I'm out of ideas.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I am using CleanRom. I had previously used odin to get back to stock when I had issues with losing my iemi. My camera worked then briefly on 10.1 but its been downhill since

cevil203 said:
I am using CleanRom. I had previously used odin to get back to stock when I had issues with losing my iemi. My camera worked then briefly on 10.1 but its been downhill since
Click to expand...
Click to collapse
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the input, seems like the end of the road when resorting to that

BadUsername said:
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
so I odin'd back to stock, and the same problem continues

cevil203 said:
so I odin'd back to stock, and the same problem continues
Click to expand...
Click to collapse
Flash the latest firmware.
Sent from my SCH-I535 using Tapatalk 2

It sounds like a hardware issue at this point.
Sent from my SCH-I535 using xda premium

Watoy said:
It sounds like a hardware issue at this point.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I agree, I can't think of any reason why it wouldn't work after all that.
Sent from my SCH-I535 using Tapatalk 2

so today, the camera starts working. what the... cleanrom 7
EDIT...and now its not working again...

If it is working then suddenly not in the same day I'm leaning toward hardware issue. Have you tried restoring to stock but not the newest update? Try a older firmware. I had a friend I helped root his s3 and there was a issue with the newest firmware giving this error when flashing custom roms since the roms were based off the older firmware. Hope this helps if not I'm sorry about your phone
Sent from my SCH-I605 using xda app-developers app

cevil203 said:
so today, the camera starts working. what the... cleanrom 7
EDIT...and now its not working again...
Click to expand...
Click to collapse
ems3 said:
If it is working then suddenly not in the same day I'm leaning toward hardware issue. Have you tried restoring to stock but not the newest update? Try a older firmware. I had a friend I helped root his s3 and there was a issue with the newest firmware giving this error when flashing custom roms since the roms were based off the older firmware. Hope this helps if not I'm sorry about your phone
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Tacking onto what @ems3 posted, you could try this as well which involves Odin and flashing the pit file. Disregard everything after the first post as there was an unnecessary discussion that quickly followed.

SlimSnoopOS said:
Tacking onto what @ems3 posted, you could try this as well which involves Odin and flashing the pit file. Disregard everything after the first post as there was an unnecessary discussion that quickly followed.
Click to expand...
Click to collapse
thanks for the tip...i will look into it, but today the camera seems to be working

I aslo have camera errors today after flashing the Synergy ROM (r484). I'm set on this ROM because it is the only one I've found that will
Support other cell carriers on a Verizon SCH-I535 and I need to switch carriers in a couple of days. Some one in a developer thread said that it should get the older firmware flashed to fix the camera or else I could choose to change the kernal. My firmware is I535VRBMF1 and what was sugested was MB1 firmware. I have several questions. What would I risk or loose by going to the older firmware? How do I get it and flash it (I have Odin but haven't used it yet). The Kernal came with Synergy ROM and is refered to as Ziggy's.

mj79 said:
I aslo have camera errors today after flashing the Synergy ROM (r484). I'm set on this ROM because it is the only one I've found that will
Support other cell carriers on a Verizon SCH-I535 and I need to switch carriers in a couple of days. Some one in a developer thread said that it should get the older firmware flashed to fix the camera or else I could choose to change the kernal. My firmware is I535VRBMF1 and what was sugested was MB1 firmware. I have several questions. What would I risk or loose by going to the older firmware? How do I get it and flash it (I have Odin but haven't used it yet). The Kernal came with Synergy ROM and is refered to as Ziggy's.
Click to expand...
Click to collapse
You don't stand to lose anything except possibly data connection and speed, and signal strength and quality. You can find the all in one (AIO) zips from Invisiblek's thread, just flash VRBMB1 aio in recovery. Invisiblek does not make any of these that are Odin flashable for JB and beyond.

SlimSnoopOS said:
You don't stand to lose anything except possibly data connection and speed, and signal strength and quality. You can find the all in one (AIO) zips from Invisiblek's thread, just flash VRBMB1 aio in recovery. Invisiblek does not make any of these that are Odin flashable for JB and beyond.
Click to expand...
Click to collapse
:good:Thanks a bunch. I'm going to flash it now.

I337 ATT MODEMS: OC3 NJ4 NI1 NC1 NB1 FMLD MK2 MJ9 MJ6 MF3 MDL MDB Modems

UPDATED 4-08-2015 with NEW ATT MODEM OC3 5.0.1 Modem
A NOTE TO CLARIFY MODEMS AND FLASHING THEM: Your Modem is your BASEBAND. Flashing a Modem will UPDATE your BASEBAND.
Flashing a Modem and Updating your BASEBAND does NOT change or lock down your bootloader at all/any further than it already is.
The BOOTLOADER is what determines how locked down your phone is and WHICH root/recovery method can be used.
IF you are on MDB or MDL BOOTLOADERS then flashing these modems will NOT effect your ability to flash anything or change your bootloader.
If you are on MF3 or Newer bootloader then you can use SAFESTRAP to have its recovery and flash compatible Roms AND these modems.
If you are on MK2 bootloader you can use MK2's version of Safestrap and flash compatible Roms and Any of these modems.
To VERIFY "WHICH BOOTLOADER" you have on your phone you can follow these basic instructions.
1. Get "Terminal Emulator" from the play store.
2. Open Terminal Emulator and then type "su" without the quotation marks.
3. Hit the "x" and close Terminal Emulator once you have granted it Root Permission
4. Open Terminal Emulator app, type "su" without the quotes
5. Type getprop ro.bootloader
6. Look at the first line that shows up which is the installed bootloader. It should read "something like"
I337UCUAMDB/ I337UCUAMDL/ I337***MK2/ etc. etc.
I have put the other ATT Modems here as well for users to find the ATT specific modems in one place or in case you need/want to go back to your previous modem. Flashable in CWM/TWRP Recoveries.
Android File Host Links to ALL MODEMS https://www.androidfilehost.com/?w=files&flid=28808
ATT OC3 5.0.1 MODEM
4-08-2015
Thanks to Muniz_ri for posting his stock partition file which I grabbed the modem from.
https://www.androidfilehost.com/?fid=95916177934552752
ATT NJ4 4.4.4 Modem
11-14-2014
Thanks to Muniz_ri for uploading a stock rooted ROM from the .cfg 4.4.4 firmware update. Pulled modem from his rom.
http://d-h.st/V7Oi
ATT NI1 KK MODEM
9-18-2014
THANKS to Venom0642 for providing the modem and Muniz_ri for the firmware dump.
http://d-h.st/zqT
ATT NC1 OFFICIAL UPDATE KK MODEM
4-24-2014
THANKS to Jeboo for providing it
http://d-h.st/6th
Jeboos Link
http://d-h.st/4Xi
ATT NB1 OFFICIAL KK MODEM 2-26-2014
THANKS to Jeboo for making it for us...
http://d-h.st/4p8
ATT FMLD LEAKED KK MODEM 1-26-2014
THANKS to Shoman for extracting the modem for us!!!
http://d-h.st/OSt
ATT MK2 MODEM11-28-2013 http://d-h.st/2S0
ATT MJ9 MODEM 11-14-2013
http://d-h.st/Lam
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
ATT LEAKED MJ6 MODEM
10-24-2013
http://d-h.st/Bot
ATT MF3 MODEM 7-9-2013
http://d-h.st/ReU
ATT MDL MODEM MARCH 2013
http://d-h.st/6j8
ATT MDB MODEM MARCH? 2013 Came with Release of phone
http://d-h.st/Qei
FOR SAFESTRAP MF3 and NEWER USERS
This is what a tester DeadlySin9 did. He flashed the MJ6 Modem and it worked fine. He then tested going back to the MF3 modem. So if your signal becomes worse you CAN flash back to MF3 Modem but IF you have problems you may need to follow his advice below.You can see his comments here:
DeadlySin9 said:
Baseband is back on MF3 after flashing. Interestingly enough it's booted into stock and safestrap isn't loading. SuperSU is loaded and giving toast notifications and even let me grant to TiBu. Will try reinstalling SS and/or rerooting and see what works.
Back into my Safestrap slot, modem stuck across reboot. Rerooting was necessary, although root wasn't lost (go figure). Data and service are enabled just fine. Will try going back to MJ6 modem
Click to expand...
Click to collapse
So give DeadlySin9 a Thanks for testing.
FOR MK2 SAFESTRAP USERS
THANKS to Churapa for letting us know these DO work for the newer safestrap as well. Here is his comments and how he did it.
churapa said:
I can confirm that the modems work on Safestrap 3.71, I am running in the Stock strap the ROM SHostock v3.0 which is MK2 v4.3 and flashed the MJ6 modem from OP and my signal reception increased dramatically for the best.
Click to expand...
Click to collapse
I am putting these ATT I337 16GB and 32GB pit file here as a repository for anyone that may need it in the future. Please use at your OWN RISK and KNOW WHAT your doing and WHEN to use these to save your phones life. PLEASE do your research before using these to flash with Odin. They CAN ruin your device if used wrong or use the wrong one.
I337 ATT 32 GB PIT FILE REPOSITORY (Pulled from my 32GB I337)
DOWNLOAD LINK http://d-h.st/le3
I337 ATT 16GB PIT FILE REPOSITORY
DOWNLOAD LINK http://d-h.st/zxW
Thanks to "mbonus" and "Beast330" for getting us the 16GB pit files.
I am thinking there is no difference between the 16GB and 32GB pit file as they are exactly the same size and have the same exact md5 even though pulled from different phones.

Any difference over mf3? Is it worth flashing?

Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!

Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
In my experience modems can be better or worse. It all depends on where your located in the country. What works good for one person may not work good for another. The choice of having more modems to flash can increase or decrease your data speeds/call quality.
It does not hurt to try out modems and find which one works best for you in your particular region.
You can always flash back just as easy with the exact same modem you had if it doesn't work better for you.
Sent from My Spiderman Themed I337

I believe this will also help out with all the ATT users getting data drops on 4.3 with earlier modems. Trying this out now with echoe rom
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

How about sending mms/sms...any issues?

Calls, LTE, SMS, MMS, etc. all working for me.
This modem does seem a bit better, but I'll have to try it for a few days to be sure.

Venom0642 said:
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!
Click to expand...
Click to collapse
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven

RockRatt said:
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
I extracted the modem and put it into a flashable zip to be used in cwm/twrp recoveries.
Link to Dev Host http://d-h.st/Bot
Link to dropbox https://db.tt/jM6yALXs
EDIT: I flashed it on Vision MJ5 Rom Firmware version 4.3 and so far so good. Then I flashed back to MF3 firmware ROM ShoStock 4.2.2 and flashed it and it worked on 4.2.2 as well.
Sent From My Spiderman Themed I337
Click to expand...
Click to collapse
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.

mrnovanova said:
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven
Click to expand...
Click to collapse
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good

trueking7 said:
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good
Click to expand...
Click to collapse
Facepalm makes sense
Carried by a Raven

rfb813 said:
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.
Click to expand...
Click to collapse
Yes I do but they also can be found on the modem thread in the dev section. There is MDL/mdb/and mf3 if I remember correctly. If you need them send me a PM
Sent from My Spiderman Themed I337

I couldn't get the aws mod to work on this modem. keeps giving error of invalid command after it gets to 5%.
Can anyone else confirm?

While I didn't notice a difference when I switched from mdl to mf3, I do think mj6 shows an improvement in signal. Time will tell but so far it seems better.
Thanks, RockRatt.
Sent from my SGH-I337 using xda premium

Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app

sk8trix said:
Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Click to expand...
Click to collapse
See OP...it says it works on 4.2.2

sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
Lol oh wow sorry damn party foul

sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
That would entail reading a whole page back

immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4

p1gp3n said:
immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4
Click to expand...
Click to collapse
Good to hear. This is why I always try new modems. Then if they don't work out for me I can always flash back to the previous one that worked better
Sent From My Spiderman Themed I337

Baseband update

Just have a quick question. I'm not really all up to date with how the radios work but the new I535VRUCML1 is abler to be flashed I'm on 1535vrbmf1. If I flash the new radio will I still be able to use 4.1.2 roms or only be able to use 4.3?

It would be wise to stay on the MF1 baseband until you decide you want a 4.3 TW ROM. I Was on an AOSP 4.4 ROM with MF1 and had no problems.

bsannes said:
Just have a quick question. I'm not really all up to date with how the radios work but the new I535VRUCML1 is abler to be flashed I'm on 1535vrbmf1. If I flash the new radio will I still be able to use 4.1.2 roms or only be able to use 4.3?
Click to expand...
Click to collapse
You cannot be on anything older than a 4.3 ROM with the ML1 radio... you WILL brick.
There is a ML1 radio available for download and all you have to do is flash it in recovery. But like I said, you must be on a 4.3-4.4 based ROM to flash it without bricking.
Sent from my SCH-I535 using xda app-developers app

Ok great thank you. So if I try a 4.3 ROM and decide to go back to 4.1 or restore my ROM I should also flash the old mf1.
Sent from my SCH-I535 using Tapatalk

RBarnett09 said:
You cannot be on anything older than a 4.3 ROM with the ML1 radio... you WILL brick.
There is a ML1 radio available for download and all you have to do is flash it in recovery. But like I said, you must be on a 4.3-4.4 based ROM to flash it without bricking.
Click to expand...
Click to collapse
That's not true, at least not for all phones. I flashed the ML1 radio while running a 4.1.2 Touchwiz ROM and everything worked fine. My signal and data speeds seemed worse than on the MF1 radio though, so I flashed back.

bsannes said:
Ok great thank you. So if I try a 4.3 ROM and decide to go back to 4.1 or restore my ROM I should also flash the old mf1.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Correct.
Here's the link for ML1:
http://invisiblek.org/sch-i535/modems/d2vzw_ML1_modem.zip
Jacquestrapp said:
That's not true, at least not for all phones. I flashed the ML1 radio while running a 4.1.2 Touchwiz ROM and everything worked fine. My signal and data speeds seemed worse than on the MF1 radio though, so I flashed back.
Click to expand...
Click to collapse
I could be wrong but from what I've read, many people must be extra careful about what radios they flash and when... especially with ML1... for some reason.
Sent from my SCH-I535 using xda app-developers app

Ml1 radio will work fine on any rom you run. If you took the OTA update, then you are unable to flash any radios since you have the entire ML1 firmware. The bootloader needs every part of the firmware in order to boot.
Since the flashable zip is only the radio for ML1, there's no danger of this doing any harm or bricking your phone. People have reported much better signal strength when using the ML1 radio with the MF1 firmware on 4.3 roms. I would stay on MF1 if using a 4.1.2 rom. I'm actually still using MB1.
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 12:10 PM ---------- Previous post was at 11:56 AM ----------
RBarnett09 said:
I could be wrong but from what I've read, many people must be extra careful about what radios they flash and when... especially with ML1... for some reason.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You're mostly right, if you flash the entire ML1 firmware you will brick, and that will cause problems when you run a 4.1.2 rom. Flashing the modem only has no bad effects except for possibly decreased signal strength.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
You're mostly right, if you flash the entire ML1 firmware you will brick, and that will cause problems when you run a 4.1.2 rom. Flashing the modem only has no bad effects except for possibly decreased signal strength.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app

RBarnett09 said:
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It's possible, but you aren't going to do any harm testing it out.
Sent from my SCH-I535 using Tapatalk 2

RBarnett09 said:
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
BadUsername said:
It's possible, but you aren't going to do any harm testing it out.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
VRUCML1 should work a little better on AOSP than VRBMF1 so long as it includes commits like this

What rom/modem has the best reception now?

I'm running SlimRom 1.9 (AOSP 4.3 not KitKat) with the MF1 modem. I live in an area with somewhat poor reception, so data speeds are very low in my apartment. But recently I've been getting too many dropped calls, nearly every call has problems.
What are my best options at this point?
1. update to ML1 modem (not firmware) and keep using AOSP
2. switch to 4.3 TW rom and ML1
Any other things to try?

ECrispy said:
I'm running SlimRom 1.9 (AOSP 4.3 not KitKat) with the MF1 modem. I live in an area with somewhat poor reception, so data speeds are very low in my apartment. But recently I've been getting too many dropped calls, nearly every call has problems.
What are my best options at this point?
1. update to ML1 modem (not firmware) and keep using AOSP
2. switch to 4.3 TW rom and ML1
Any other things to try?
Click to expand...
Click to collapse
Try both, see which you like better.
Sent from my SCH-I535 using Tapatalk 2

BadUsername said:
Try both, see which you like better.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Concerned about losing root etc if I go to 4.3

ECrispy said:
Concerned about losing root etc if I go to 4.3
Click to expand...
Click to collapse
You won't.
As long as you flash the ml1 modem you'll have no issues at all. Just don't flash anything that says ml1 firmware or ml1 ota stock rom.
Sent from my SCH-I535 using Tapatalk 2