I337 ATT MODEMS: OC3 NJ4 NI1 NC1 NB1 FMLD MK2 MJ9 MJ6 MF3 MDL MDB Modems - AT&T Samsung Galaxy S 4 General

UPDATED 4-08-2015 with NEW ATT MODEM OC3 5.0.1 Modem
A NOTE TO CLARIFY MODEMS AND FLASHING THEM: Your Modem is your BASEBAND. Flashing a Modem will UPDATE your BASEBAND.
Flashing a Modem and Updating your BASEBAND does NOT change or lock down your bootloader at all/any further than it already is.
The BOOTLOADER is what determines how locked down your phone is and WHICH root/recovery method can be used.
IF you are on MDB or MDL BOOTLOADERS then flashing these modems will NOT effect your ability to flash anything or change your bootloader.
If you are on MF3 or Newer bootloader then you can use SAFESTRAP to have its recovery and flash compatible Roms AND these modems.
If you are on MK2 bootloader you can use MK2's version of Safestrap and flash compatible Roms and Any of these modems.
To VERIFY "WHICH BOOTLOADER" you have on your phone you can follow these basic instructions.
1. Get "Terminal Emulator" from the play store.
2. Open Terminal Emulator and then type "su" without the quotation marks.
3. Hit the "x" and close Terminal Emulator once you have granted it Root Permission
4. Open Terminal Emulator app, type "su" without the quotes
5. Type getprop ro.bootloader
6. Look at the first line that shows up which is the installed bootloader. It should read "something like"
I337UCUAMDB/ I337UCUAMDL/ I337***MK2/ etc. etc.
I have put the other ATT Modems here as well for users to find the ATT specific modems in one place or in case you need/want to go back to your previous modem. Flashable in CWM/TWRP Recoveries.
Android File Host Links to ALL MODEMS https://www.androidfilehost.com/?w=files&flid=28808
ATT OC3 5.0.1 MODEM
4-08-2015
Thanks to Muniz_ri for posting his stock partition file which I grabbed the modem from.
https://www.androidfilehost.com/?fid=95916177934552752
ATT NJ4 4.4.4 Modem
11-14-2014
Thanks to Muniz_ri for uploading a stock rooted ROM from the .cfg 4.4.4 firmware update. Pulled modem from his rom.
http://d-h.st/V7Oi
ATT NI1 KK MODEM
9-18-2014
THANKS to Venom0642 for providing the modem and Muniz_ri for the firmware dump.
http://d-h.st/zqT
ATT NC1 OFFICIAL UPDATE KK MODEM
4-24-2014
THANKS to Jeboo for providing it
http://d-h.st/6th
Jeboos Link
http://d-h.st/4Xi
ATT NB1 OFFICIAL KK MODEM 2-26-2014
THANKS to Jeboo for making it for us...
http://d-h.st/4p8
ATT FMLD LEAKED KK MODEM 1-26-2014
THANKS to Shoman for extracting the modem for us!!!
http://d-h.st/OSt
ATT MK2 MODEM11-28-2013 http://d-h.st/2S0
ATT MJ9 MODEM 11-14-2013
http://d-h.st/Lam
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
ATT LEAKED MJ6 MODEM
10-24-2013
http://d-h.st/Bot
ATT MF3 MODEM 7-9-2013
http://d-h.st/ReU
ATT MDL MODEM MARCH 2013
http://d-h.st/6j8
ATT MDB MODEM MARCH? 2013 Came with Release of phone
http://d-h.st/Qei
FOR SAFESTRAP MF3 and NEWER USERS
This is what a tester DeadlySin9 did. He flashed the MJ6 Modem and it worked fine. He then tested going back to the MF3 modem. So if your signal becomes worse you CAN flash back to MF3 Modem but IF you have problems you may need to follow his advice below.You can see his comments here:
DeadlySin9 said:
Baseband is back on MF3 after flashing. Interestingly enough it's booted into stock and safestrap isn't loading. SuperSU is loaded and giving toast notifications and even let me grant to TiBu. Will try reinstalling SS and/or rerooting and see what works.
Back into my Safestrap slot, modem stuck across reboot. Rerooting was necessary, although root wasn't lost (go figure). Data and service are enabled just fine. Will try going back to MJ6 modem
Click to expand...
Click to collapse
So give DeadlySin9 a Thanks for testing.
FOR MK2 SAFESTRAP USERS
THANKS to Churapa for letting us know these DO work for the newer safestrap as well. Here is his comments and how he did it.
churapa said:
I can confirm that the modems work on Safestrap 3.71, I am running in the Stock strap the ROM SHostock v3.0 which is MK2 v4.3 and flashed the MJ6 modem from OP and my signal reception increased dramatically for the best.
Click to expand...
Click to collapse
I am putting these ATT I337 16GB and 32GB pit file here as a repository for anyone that may need it in the future. Please use at your OWN RISK and KNOW WHAT your doing and WHEN to use these to save your phones life. PLEASE do your research before using these to flash with Odin. They CAN ruin your device if used wrong or use the wrong one.
I337 ATT 32 GB PIT FILE REPOSITORY (Pulled from my 32GB I337)
DOWNLOAD LINK http://d-h.st/le3
I337 ATT 16GB PIT FILE REPOSITORY
DOWNLOAD LINK http://d-h.st/zxW
Thanks to "mbonus" and "Beast330" for getting us the 16GB pit files.
I am thinking there is no difference between the 16GB and 32GB pit file as they are exactly the same size and have the same exact md5 even though pulled from different phones.

Any difference over mf3? Is it worth flashing?

Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!

Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
In my experience modems can be better or worse. It all depends on where your located in the country. What works good for one person may not work good for another. The choice of having more modems to flash can increase or decrease your data speeds/call quality.
It does not hurt to try out modems and find which one works best for you in your particular region.
You can always flash back just as easy with the exact same modem you had if it doesn't work better for you.
Sent from My Spiderman Themed I337

I believe this will also help out with all the ATT users getting data drops on 4.3 with earlier modems. Trying this out now with echoe rom
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

How about sending mms/sms...any issues?

Calls, LTE, SMS, MMS, etc. all working for me.
This modem does seem a bit better, but I'll have to try it for a few days to be sure.

Venom0642 said:
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!
Click to expand...
Click to collapse
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven

RockRatt said:
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
I extracted the modem and put it into a flashable zip to be used in cwm/twrp recoveries.
Link to Dev Host http://d-h.st/Bot
Link to dropbox https://db.tt/jM6yALXs
EDIT: I flashed it on Vision MJ5 Rom Firmware version 4.3 and so far so good. Then I flashed back to MF3 firmware ROM ShoStock 4.2.2 and flashed it and it worked on 4.2.2 as well.
Sent From My Spiderman Themed I337
Click to expand...
Click to collapse
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.

mrnovanova said:
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven
Click to expand...
Click to collapse
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good

trueking7 said:
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good
Click to expand...
Click to collapse
Facepalm makes sense
Carried by a Raven

rfb813 said:
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.
Click to expand...
Click to collapse
Yes I do but they also can be found on the modem thread in the dev section. There is MDL/mdb/and mf3 if I remember correctly. If you need them send me a PM
Sent from My Spiderman Themed I337

I couldn't get the aws mod to work on this modem. keeps giving error of invalid command after it gets to 5%.
Can anyone else confirm?

While I didn't notice a difference when I switched from mdl to mf3, I do think mj6 shows an improvement in signal. Time will tell but so far it seems better.
Thanks, RockRatt.
Sent from my SGH-I337 using xda premium

Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app

sk8trix said:
Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Click to expand...
Click to collapse
See OP...it says it works on 4.2.2

sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
Lol oh wow sorry damn party foul

sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
That would entail reading a whole page back

immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4

p1gp3n said:
immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4
Click to expand...
Click to collapse
Good to hear. This is why I always try new modems. Then if they don't work out for me I can always flash back to the previous one that worked better
Sent From My Spiderman Themed I337

Related

New dump from google!!! I9505gueubmg8...

I9505GUEUBMG8
Info:
AP: I9505GUEUBMG8
CP: I9505GUEUBMG8
CSC: I9505GXARBMG8
Where is the development?
In my pants...
Thanks going to check it out
is this another 4.3 leak?
I made a flashable zip for you guys. Install through recovery. If you are not on i9505, flash loki-doki afterwards. Enjoy!:
Thread HERE
This is a new 4.3 build, I don't know if it's leaked, maybe the battery life is fixed
broodplank1337 said:
This is a new 4.3 build, I don't know if it's leaked, maybe the battery life is fixed
Click to expand...
Click to collapse
Hi broodplank1337, give you thanks for your really good job and colaboration with your kernel, ROM and info posted across threads.
I want ask you if you tried both new 4.3 leaked firmwares. Are the same? Any differences? Would be possible use new PIT file uploaded to manage those Gb loosed on a GT-i9505 International without reboots or semi-bricked status?
Thanks again! :good:
Here's a flashable modem for any one who wants to experiment. But last I checked i9505 doesn't support cwm flashing but 337 users can test.
http://mbqonxda.net/febby/Android/Galaxy_S4/Modems/GE-MG8-Modem-07-18-2013.zip
Sent from my SGH-I337 using Tapatalk 2
Febby said:
Here's a flashable modem for any one who wants to experiment. But last I checked i9505 doesn't support cwm flashing but 337 users can test.
http://mbqonxda.net/febby/Android/Galaxy_S4/Modems/GE-MG8-Modem-07-18-2013.zip
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
How does that make sense? i9505 has an unlockable bootloader. On my i337 I have a locked bootloader and everything has to be Loki patched but your saying even with my bootloader locked were the only users who can flash radios?
Easton999GS said:
How does that make sense? i9505 has an unlockable bootloader. On my i337 I have a locked bootloader and everything has to be Loki patched but your saying even with my bootloader locked were the only users who can flash radios?
Click to expand...
Click to collapse
I'm just going by what is on the modems thread for the i9505. They state on their modems page that cwm zips aren't supported, only Odin fladhable. Modem flashed but baseband stays as unknown on the 337 so its unusable, unless non-hlos is needed which I'm not about to mess with.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Febby said:
I'm just going by what is on the modems thread for the i9505. They state on their modems page that cwm zips aren't supported, only Odin fladhable. Modem flashed but baseband stays as unknown on the 337 so its unusable, unless non-hlos is needed which I'm not about to mess with.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
we need non HLOS for newer modems on the i337 because we cant update our bootloaders or it patches our ability to flash roms. If we flash as is with HLOS we lose sound on the phone completely.
Easton999GS said:
we need non HLOS for newer modems on the i337 because we cant update our bootloaders or it patches our ability to flash roms. If we flash as is with HLOS we lose sound on the phone completely.
Click to expand...
Click to collapse
I'll have to leave that to the more experienced to create a zip or odin tar. I'm happy with my MF3 modem and non MF3 boot loader. Maybe my buddy @garwynn can comment on this modem deal because I don't know how non hlos works but it shouldn't prevent the baseband from showing. The sound and wifi both worked without issue, just the MF8 baseband didn't show so hlos in my experience didn't affect the sound or wifi.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Request for re-upload
Guys,
Can someone re-upload the ODIN files.. The link is invalid.
Did Samsung request to remove this?
Where is the link?
sent by me!
+1 for the Odin mirror
DJ_Jedi said:
+1 for the Odin mirror
Click to expand...
Click to collapse
Not sure if it is odin though
http://mbqonxda.net/febby/Android/Galaxy_S4/leaks/
MichelN said:
Not sure if it is odin though
http://mbqonxda.net/febby/Android/Galaxy_S4/leaks/
Click to expand...
Click to collapse
Thanks, downloading now, let you know if it's Odin flashable.
DJ_Jedi said:
Thanks, downloading now, let you know if it's Odin flashable.
Click to expand...
Click to collapse
From what i have seen in the zip file it is. I only don't know what that pit file is for.
Are you trying to flash it on a i9505 or i9505G ?
Yes it's the Odin version, the PIT is to repartition the device to the G table, but it's not accepted by the i9505 bootloader.
Of course im gonna flash it on the standard i9505, but i have to find a way to keep my Candy Crush savedata lol, Helium is not working that way, maybe Facebook sync?

[Factory stock] [Odin files] AIO I337Z TUUAMH1

This is a thread for I337Z users that want to go back to stock. This here is the full jumbo mumble packages.
Model: SGH-I337Z (AIO prepaid)
Firmware: TUUAMH1
Whats in included: Platform, bootloaders, modem, CSC. Each one can be flashed individually via Odin I assume.
Warning do not mess with the bootloader files or anything else if you don't know what you're doing!
Requirements!!!:
° an AIO Samsung Galaxy S4 (SGH-I337Z).
°Odin 3.07
°Samsung drivers.
Steps to go back to stock on an I337Z
1. Open Odin 3.07
2. Click on PDA slot to select the file platform I337ZTUUAMH1.
3. Put phone in download mode and connect it via USB.
4. Once you see your com port light up via Odin program click "Start".
5. Wait for Odin to successfully restore your AIO I337z back to stock!
Download link:
www.rwilco12.com/downloads.php?dir=...laxy S4 (AIO Wireless) (AIO-I337Z)/Stock ROMs
Mirror:
https://mega.co.nz/#!TAEWgLSZ!APeJ5CwrS1uhYtgCVczrezBhPBJgxCqilJlEOCvbx9k
Thanks to @DeANgelo130 for letting me use his device information to get this firmware out here on Xda.
************* Interesting facts ************
° This modem doesn't work on the ATT I337Z.
° I couldn't get ROM to boot on a I337 even with Loki or custom kernels. I will try re building zip.
Sent from my GT-I9505G using Tapatalk 2
What kinda device is an i337z . Lol. I have never heard that .
Sent from my GT-I9505 using Tapatalk 4
sky_fox said:
What kinda device is an i337z . Lol. I have never heard that .
Sent from my GT-I9505 using Tapatalk 4
Click to expand...
Click to collapse
Its a new S4 variant like the i337, i337M. Its for an att owned company named AIO wireless. Sgh-I337Z.
Sent from my GT-I9505G using Tapatalk 2
Febby said:
Its a new S4 variant like the i337, i337M. Its for an att owned company named AIO wireless. Sgh-I337Z.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Is there anything different about it compared to the i337?
EvanWeiler said:
Is there anything different about it compared to the i337?
Click to expand...
Click to collapse
I'm not sure. Haven't used. It's for i337z users to revert to stock or hopefully for am advanced Dev to provide a root method for them.
Sent from my GT-I9505G using Tapatalk 2
Link updated to direct fast mirror courtesy of @rwilco12!
Sent from my GT-I9505G using Tapatalk 2
EvanWeiler said:
Is there anything different about it compared to the i337?
Click to expand...
Click to collapse
Febby said:
Link updated to direct fast mirror courtesy of @rwilco12!
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
well, I am rooted and running a custom rom right now.thanks to @intika for the awesome Locky ROM dedicated to S4s with a locked bootloader. I did have to flash an AT&T modem to the device because wifi quit working, wouldn't even turn on, but a quick flash and BOOYA I'm rockin a totally tricked out custom ROM!
Check out the thread here...http://forum.xda-developers.com/showthread.php?t=2478691
I know this post was old, but i have an aio i337z. Its rooted and unlocked. I want to upgrade to the new kitkat. Is that possible yet, and if so is it rootable yet? thanks for any help.
jrigga said:
I know this post was old, but i have an aio i337z. Its rooted and unlocked. I want to upgrade to the new kitkat. Is that possible yet, and if so is it rootable yet? thanks for any help.
Click to expand...
Click to collapse
There is not root for 4.4 yet. I don't doubt it will be out in the next 1 or 2 months
So, has anyone upgraded this to Kit-Kat yet? I don't think we'll ever see it from AIO.
So the aio variant for sure has a locked bootloader?
Asadullah said:
So the aio variant for sure has a locked bootloader?
Click to expand...
Click to collapse
Don't know for sure. It came with MH1. Is there any way to tell that won't cause a brick?
off hand I don't know but I'm gonna look around. I'm on aio but have the at&t version I've been wanting to sell mine and get a different version.
Wow, just got a software update notice for 4.4.2. Of course I'm afraid to even try to install it. I don't want to lose root. I'm just shocked to even see it.
trillog said:
there is not root for 4.4 yet. I don't doubt it will be out in the next 1 or 2 months
Click to expand...
Click to collapse
pleaase make the modem work i need it !
---------- Post added at 12:46 AM ---------- Previous post was at 12:17 AM ----------
i really need the modem file because my phone doesnt have wifi or anything its so frustrating
OTA update
I also have an Aio Wireless I337Z , thanks to this thread i was able to restore it to stock, I was messing around with the phone with no success flashing a rom, now im back to stock and i see an OTA update, is it possible to grab the URL like people do with nexus devices usin adb logcat??
PD: i dont want to update for now, just want to get the update.zip
lnxpro91 said:
I also have an Aio Wireless I337Z , thanks to this thread i was able to restore it to stock, I was messing around with the phone with no success flashing a rom, now im back to stock and i see an OTA update, is it possible to grab the URL like people do with nexus devices usin adb logcat??
PD: i dont want to update for now, just want to get the update.zip
Click to expand...
Click to collapse
Do you have root? I know there's a way to download and grab the zip from the phone if you have root. Otherwise the other method you suggested may work.
EDIT: Root method is easier as you just download, use file manager to get it from /cache, and then you can upload it for others. I don't know which root methods do and don't work for your device however. Logcat can be done, you'll just be looking through a lot of lines of logs possibly.
Sent from my SGH-I337 running GPE
true
its true what you say, i have been trying logcat but it shows a ton of lines, and im searching for the hotword .zip or zip or update and no results give me a URL, maybe samsung is cloaking the update from logcat or they found a way to hide it, in my phone the root i know it works is kingo root, but when im rooted the phone does not let me download the update, it says "your phone has been modified, updates are not available"
lnxpro91 said:
its true what you say, i have been trying logcat but it shows a ton of lines, and im searching for the hotword .zip or zip or update and no results give me a URL, maybe samsung is cloaking the update from logcat or they found a way to hide it, in my phone the root i know it works is kingo root, but when im rooted the phone does not let me download the update, it says "your phone has been modified, updates are not available"
Click to expand...
Click to collapse
Try installing Xposed Framework and Wanam Xposed, and use the fake Official system status option. I think that might fix it but I don't remember all it checks.

[Q] i535vrucnc1 Modem

Probably answered elsewhere but i couldn't find it.
I have found an zip installer that could be used to install the modem though CWM for an older version. Is there such a think for the newest version?
Thanks,
Peter
PeterK2003 said:
Probably answered elsewhere but i couldn't find it.
I have found an zip installer that could be used to install the modem though CWM for an older version. Is there such a think for the newest version?
Thanks,
Peter
Click to expand...
Click to collapse
I don't believe there is a separate modem file for NC1 yet. At least not one I have seen.
Has there been any new developments with extracting the modem from this firmware? I'm running CM11 on the ML1 modem and I've had 4g connection issues. The release info for the NC1 says it improves connection issues so of like to try it.
ChiefIlliniwek5 said:
Has there been any new developments with extracting the modem from this firmware? I'm running CM11 on the ML1 modem and I've had 4g connection issues. The release info for the NC1 says it improves connection issues so of like to try it.
Click to expand...
Click to collapse
The NC1 update is specifically for roaming in Canada.
Sent from my SCH-I535 using Xparent ICS Tapatalk 2

Modem 4.4.2 I337MUMUFOA1 TTT

Modem + NON-HILOS
Extract rar/zip file
Flash with Odin. You may need to flash it twice.
Enjoy.
OA1 modem:
https://mega.nz/#!L45klT7S!ZmpO-NwadNrYgMsYgd0kRpCmneLLeLBSturkt-a-rFI
NK1 modem:
https://mega.co.nz/#!HlJXkSIK!RB93ncfZFBACZYfqc72wz-9FWx4lFg30d4sPcWvJ0NI
NI2 modem:
https://mega.co.nz/#!i4BFBTIb!14g7fp8lph0j5T4sfz1AHSChuZqTFUz8V00se0Fqn7s
Where did this come from? Anyone test on Rogers?
cantenna said:
Where did this come from? Anyone test on Rogers?
Click to expand...
Click to collapse
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Yes, I'm on NI1 as well, thanks
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
ma678 said:
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
There all multi-csc aren't they? Just asking cause its the first time I heard this term.
So it should work with Rogers. I'll give it a try later this afternoon
cantenna said:
There all multi-csc aren't they? Just asking cause its the first time I heard this term.
So it should work with Rogers. I'll give it a try later this afternoon
Click to expand...
Click to collapse
The modem definitely works with Rogers.
The NI2 rom has all Canadian GSM carriers and quite a few more carriers. By default it flashes Bell. I tried Telus and then stick with Fido.
Sent from my SGH-I337M using Tapatalk
Confirmed Working fine here with MDJ & NH1 bootloader Rogers network
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
Bootloader = VLUFNE1
Modem = VLUFNI2
Non-HILOS = VLUFNI2
Working well, no improvements compared to UMUFNI1 or UMUFNE3. The dBm readings are about the same, but at least this is the official Canadian modem.
ma678 said:
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
My friend how you changed the CSC ???
Dial *#272*imei# on your keypad.
omek07 said:
My friend how you changed the CSC ???
Click to expand...
Click to collapse
if not better is it stable-er?
Im on a 337m that I picked up used and was on ne1.
So anyway I gave it a few days on stock- cell n data worked fine. Im actually getting up to 15 mbps on wind, wow. Tried goldfinger rom by ibastid and great but lacking some stuff I was used to like the tw refusing to rotate. Tried hyperdrive and wow feature rich. but I lose signal every now n then or upon a reboot. Like randomly once a day or so, toggling flight mode gets it back instantly. But modem issue yall think? Dont know if there is something I can tweak in ktoonzez
Loosing signal every so often, that's because your on wind network. I used to be o. Wind network as well and had this issue. Went away after switching to Rogers.
Rogers/Fido firmware was also updated last night. Basically they are all the same, though.
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
cantenna said:
Where did this come from? Anyone test on Rogers?
Click to expand...
Click to collapse
cantenna said:
Loosing signal every so often, that's because your on wind network. I used to be o. Wind network as well and had this issue. Went away after switching to Rogers.
Click to expand...
Click to collapse
Can not enable WiFi
I have rooted Fido Samsung Galaxy S4. Today I have updated it to NI2 firmware using Kies3.
When update finished, my modem was still showing NE1 and WiFi did not work.
I flashed NI2 model file (from the first post) using Odin.
Now both Firmware and baseband version show NI2, however WiFi is still disabled and I can not get it to work.
Already tried to to reflash NI2 modem with Odin for a few times, but it does not solve the problem.
Could someone please help me to solve this issue ?
Thanks!
Why would u update using kies?
fmark said:
I have rooted Fido Samsung Galaxy S4. Today I have updated it to NI2 firmware using Kies3.
When update finished, my modem was still showing NE1 and WiFi did not work.
I flashed NI2 model file (from the first post) using Odin.
Now both Firmware and baseband version show NI2, however WiFi is still disabled and I can not get it to work.
Already tried to to reflash NI2 modem with Odin for a few times, but it does not solve the problem.
Could someone please help me to solve this issue ?
Thanks!
Click to expand...
Click to collapse
I had the same problem after upgrade. Here is what I did.
Odin the full rom. Downgrade modem following the website:
http://www.w0lfdroid.com/2014/09/To...-and-Note3-Android-4.4.2-NF-or-Later.html?m=1
Root phone with TowelRoot. Install SuperSu and twrp recovery. Odin back NI2 modem. Install a customized kernel. I tested Adam and Alucard working on wifi.
Note: you will probably have to turn off Smart Connect to keep wifi staying. Try it first before you start to Odin the stock firmware.
Good luck.
Sent from my SGH-I337M using Tapatalk
Thanks! In the end I just backed everything up with Titanium and did hard reset and then restore. Now WiFi works.
anyone got changelog for new update
nabbasi said:
anyone got changelog for new update
Click to expand...
Click to collapse
All I've read online is that Google Play Services have been updated. And this Play Services update really does a number on the battery life. I haven't installed it yet, can't seem to find much info about this update.

MMS APNs?

For some reason if I'm on wifi MMS doesn't download and even when I'm off of it and on LTE it doesn't download. I'm almost certain I have all of the Verizon APNs but something is telling me I don't. Can someone post the MMS APNs? I'm on Paranoid Android 4.6 Beta 5
DubleJayJ said:
For some reason if I'm on wifi MMS doesn't download and even when I'm off of it and on LTE it doesn't download. I'm almost certain I have all of the Verizon APNs but something is telling me I don't. Can someone post the MMS APNs? I'm on Paranoid Android 4.6 Beta 5
Click to expand...
Click to collapse
I was having those issues a few weeks ago too, but on a different ROM. I don't know what fixed it, unfortunately.
Are you using your main VZW number or a Google Voice number? What firmware & modem are you using?
MrBrady said:
I was having those issues a few weeks ago too, but on a different ROM. I don't know what fixed it, unfortunately.
Are you using your main VZW number or a Google Voice number? What firmware & modem are you using?
Click to expand...
Click to collapse
Main VZW number. As for modem I'm assuming you mean baseband, which is I535VRBMF1.
DubleJayJ said:
Main VZW number. As for modem I'm assuming you mean baseband, which is I535VRBMF1.
Click to expand...
Click to collapse
The rest of the firmware is probably MF1 as well then.
You can always try upgrading your modem (only modem, not firmware) to ML1 or NE1. If you have an ad blocker installed, unblock and uninstall. That's been reported to get in the way of MMS sometimes.
I just saw this APN.xml posted in another thread. It's for VZW.
https://www.dropbox.com/s/b9zatl31s5d6237/apns-conf.xml?dl=0
MrBrady said:
The rest of the firmware is probably MF1 as well then.
You can always try upgrading your modem (only modem, not firmware) to ML1 or NE1. If you have an ad blocker installed, unblock and uninstall. That's been reported to get in the way of MMS sometimes.
I just saw this APN.xml posted in another thread. It's for VZW.
https://www.dropbox.com/s/b9zatl31s5d6237/apns-conf.xml?dl=0
Click to expand...
Click to collapse
So just flash the ML1 modem zip at the bottom of this post(http://forum.xda-developers.com/showthread.php?p=29134924)?
The link in that post isn't working however I found a mirrored one on Reddit and it *appears* to be the same.
https://www.androidfilehost.com/?fid=23329332407591786 (OP: http://www.reddit.com/r/cyanogenmod/comments/25vamv/lost_lte_on_verizon_samsung_gs3_since_cm11/ )
DubleJayJ said:
So just flash the ML1 modem zip at the bottom of this post(http://forum.xda-developers.com/showthread.php?p=29134924)?
The link in that post isn't working however I found a mirrored one on Reddit and it *appears* to be the same.
https://www.androidfilehost.com/?fid=23329332407591786 (OP: http://www.reddit.com/r/cyanogenmod/comments/25vamv/lost_lte_on_verizon_samsung_gs3_since_cm11/ )
Click to expand...
Click to collapse
That'll bump your modem up to ML1 which was taken from the locked-bootloader Android 4.3-based firmware. If you want to take it a step further, you can download the NE1 modem, which was taken from the locked-bootloader Android 4.4.2-based firmware. It seems like each phone responds a little differently. Some people say stick with ML1, some prefer NE1. Personally, I don't notice much of a difference except with NE1, it seems to stay in 3G more when coverage is low, before jumping back to 4G. I would guess it does that to save battery by sticking to the strongest signal.
MrBrady said:
That'll bump your modem up to ML1 which was taken from the locked-bootloader Android 4.3-based firmware. If you want to take it a step further, you can download the NE1 modem, which was taken from the locked-bootloader Android 4.4.2-based firmware. It seems like each phone responds a little differently. Some people say stick with ML1, some prefer NE1. Personally, I don't notice much of a difference except with NE1, it seems to stay in 3G more when coverage is low, before jumping back to 4G. I would guess it does that to save battery by sticking to the strongest signal.
Click to expand...
Click to collapse
Can't find a flashable zip of the baseband. I guess I can give it a go on Odin
DubleJayJ said:
Can't find a flashable zip of the baseband. I guess I can give it a go on Odin
Click to expand...
Click to collapse
If you do Odin just be darn sure it's only the modem.
Here's a flashable zip of the modem:
https://www.dropbox.com/s/l002qoue90dx68a/DNE1.modem.zip?dl=0
Sent from my d2lte using Tapatalk
MrBrady said:
If you do Odin just be darn sure it's only the modem.
Here's a flashable zip of the modem:
https://www.dropbox.com/s/l002qoue90dx68a/DNE1.modem.zip?dl=0
Sent from my d2lte using Tapatalk
Click to expand...
Click to collapse
I flashed it. I'll see if that fixes the problem
MrBrady said:
If you do Odin just be darn sure it's only the modem.
Here's a flashable zip of the modem:
https://www.dropbox.com/s/l002qoue90dx68a/DNE1.modem.zip?dl=0
Sent from my d2lte using Tapatalk
Click to expand...
Click to collapse
So it worked fine up until yesterday around 3PM EST when my phone decided "haha not gonna send texts anymore."
I can call, receive calls, the whole 9 yards but I can't send texts. It sits at Sending for either 10 minutes - several hours or it fails
EDIT- Upon reboot it'll send a text sometimes but for the most part I can't send any
Sent from my SCH-I535 using XDA Free mobile app

Categories

Resources