Related
I9505GUEUBMG8
Info:
AP: I9505GUEUBMG8
CP: I9505GUEUBMG8
CSC: I9505GXARBMG8
Where is the development?
In my pants...
Thanks going to check it out
is this another 4.3 leak?
I made a flashable zip for you guys. Install through recovery. If you are not on i9505, flash loki-doki afterwards. Enjoy!:
Thread HERE
This is a new 4.3 build, I don't know if it's leaked, maybe the battery life is fixed
broodplank1337 said:
This is a new 4.3 build, I don't know if it's leaked, maybe the battery life is fixed
Click to expand...
Click to collapse
Hi broodplank1337, give you thanks for your really good job and colaboration with your kernel, ROM and info posted across threads.
I want ask you if you tried both new 4.3 leaked firmwares. Are the same? Any differences? Would be possible use new PIT file uploaded to manage those Gb loosed on a GT-i9505 International without reboots or semi-bricked status?
Thanks again! :good:
Here's a flashable modem for any one who wants to experiment. But last I checked i9505 doesn't support cwm flashing but 337 users can test.
http://mbqonxda.net/febby/Android/Galaxy_S4/Modems/GE-MG8-Modem-07-18-2013.zip
Sent from my SGH-I337 using Tapatalk 2
Febby said:
Here's a flashable modem for any one who wants to experiment. But last I checked i9505 doesn't support cwm flashing but 337 users can test.
http://mbqonxda.net/febby/Android/Galaxy_S4/Modems/GE-MG8-Modem-07-18-2013.zip
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
How does that make sense? i9505 has an unlockable bootloader. On my i337 I have a locked bootloader and everything has to be Loki patched but your saying even with my bootloader locked were the only users who can flash radios?
Easton999GS said:
How does that make sense? i9505 has an unlockable bootloader. On my i337 I have a locked bootloader and everything has to be Loki patched but your saying even with my bootloader locked were the only users who can flash radios?
Click to expand...
Click to collapse
I'm just going by what is on the modems thread for the i9505. They state on their modems page that cwm zips aren't supported, only Odin fladhable. Modem flashed but baseband stays as unknown on the 337 so its unusable, unless non-hlos is needed which I'm not about to mess with.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Febby said:
I'm just going by what is on the modems thread for the i9505. They state on their modems page that cwm zips aren't supported, only Odin fladhable. Modem flashed but baseband stays as unknown on the 337 so its unusable, unless non-hlos is needed which I'm not about to mess with.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
we need non HLOS for newer modems on the i337 because we cant update our bootloaders or it patches our ability to flash roms. If we flash as is with HLOS we lose sound on the phone completely.
Easton999GS said:
we need non HLOS for newer modems on the i337 because we cant update our bootloaders or it patches our ability to flash roms. If we flash as is with HLOS we lose sound on the phone completely.
Click to expand...
Click to collapse
I'll have to leave that to the more experienced to create a zip or odin tar. I'm happy with my MF3 modem and non MF3 boot loader. Maybe my buddy @garwynn can comment on this modem deal because I don't know how non hlos works but it shouldn't prevent the baseband from showing. The sound and wifi both worked without issue, just the MF8 baseband didn't show so hlos in my experience didn't affect the sound or wifi.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Request for re-upload
Guys,
Can someone re-upload the ODIN files.. The link is invalid.
Did Samsung request to remove this?
Where is the link?
sent by me!
+1 for the Odin mirror
DJ_Jedi said:
+1 for the Odin mirror
Click to expand...
Click to collapse
Not sure if it is odin though
http://mbqonxda.net/febby/Android/Galaxy_S4/leaks/
MichelN said:
Not sure if it is odin though
http://mbqonxda.net/febby/Android/Galaxy_S4/leaks/
Click to expand...
Click to collapse
Thanks, downloading now, let you know if it's Odin flashable.
DJ_Jedi said:
Thanks, downloading now, let you know if it's Odin flashable.
Click to expand...
Click to collapse
From what i have seen in the zip file it is. I only don't know what that pit file is for.
Are you trying to flash it on a i9505 or i9505G ?
Yes it's the Odin version, the PIT is to repartition the device to the G table, but it's not accepted by the i9505 bootloader.
Of course im gonna flash it on the standard i9505, but i have to find a way to keep my Candy Crush savedata lol, Helium is not working that way, maybe Facebook sync?
UPDATED 4-08-2015 with NEW ATT MODEM OC3 5.0.1 Modem
A NOTE TO CLARIFY MODEMS AND FLASHING THEM: Your Modem is your BASEBAND. Flashing a Modem will UPDATE your BASEBAND.
Flashing a Modem and Updating your BASEBAND does NOT change or lock down your bootloader at all/any further than it already is.
The BOOTLOADER is what determines how locked down your phone is and WHICH root/recovery method can be used.
IF you are on MDB or MDL BOOTLOADERS then flashing these modems will NOT effect your ability to flash anything or change your bootloader.
If you are on MF3 or Newer bootloader then you can use SAFESTRAP to have its recovery and flash compatible Roms AND these modems.
If you are on MK2 bootloader you can use MK2's version of Safestrap and flash compatible Roms and Any of these modems.
To VERIFY "WHICH BOOTLOADER" you have on your phone you can follow these basic instructions.
1. Get "Terminal Emulator" from the play store.
2. Open Terminal Emulator and then type "su" without the quotation marks.
3. Hit the "x" and close Terminal Emulator once you have granted it Root Permission
4. Open Terminal Emulator app, type "su" without the quotes
5. Type getprop ro.bootloader
6. Look at the first line that shows up which is the installed bootloader. It should read "something like"
I337UCUAMDB/ I337UCUAMDL/ I337***MK2/ etc. etc.
I have put the other ATT Modems here as well for users to find the ATT specific modems in one place or in case you need/want to go back to your previous modem. Flashable in CWM/TWRP Recoveries.
Android File Host Links to ALL MODEMS https://www.androidfilehost.com/?w=files&flid=28808
ATT OC3 5.0.1 MODEM
4-08-2015
Thanks to Muniz_ri for posting his stock partition file which I grabbed the modem from.
https://www.androidfilehost.com/?fid=95916177934552752
ATT NJ4 4.4.4 Modem
11-14-2014
Thanks to Muniz_ri for uploading a stock rooted ROM from the .cfg 4.4.4 firmware update. Pulled modem from his rom.
http://d-h.st/V7Oi
ATT NI1 KK MODEM
9-18-2014
THANKS to Venom0642 for providing the modem and Muniz_ri for the firmware dump.
http://d-h.st/zqT
ATT NC1 OFFICIAL UPDATE KK MODEM
4-24-2014
THANKS to Jeboo for providing it
http://d-h.st/6th
Jeboos Link
http://d-h.st/4Xi
ATT NB1 OFFICIAL KK MODEM 2-26-2014
THANKS to Jeboo for making it for us...
http://d-h.st/4p8
ATT FMLD LEAKED KK MODEM 1-26-2014
THANKS to Shoman for extracting the modem for us!!!
http://d-h.st/OSt
ATT MK2 MODEM11-28-2013 http://d-h.st/2S0
ATT MJ9 MODEM 11-14-2013
http://d-h.st/Lam
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
ATT LEAKED MJ6 MODEM
10-24-2013
http://d-h.st/Bot
ATT MF3 MODEM 7-9-2013
http://d-h.st/ReU
ATT MDL MODEM MARCH 2013
http://d-h.st/6j8
ATT MDB MODEM MARCH? 2013 Came with Release of phone
http://d-h.st/Qei
FOR SAFESTRAP MF3 and NEWER USERS
This is what a tester DeadlySin9 did. He flashed the MJ6 Modem and it worked fine. He then tested going back to the MF3 modem. So if your signal becomes worse you CAN flash back to MF3 Modem but IF you have problems you may need to follow his advice below.You can see his comments here:
DeadlySin9 said:
Baseband is back on MF3 after flashing. Interestingly enough it's booted into stock and safestrap isn't loading. SuperSU is loaded and giving toast notifications and even let me grant to TiBu. Will try reinstalling SS and/or rerooting and see what works.
Back into my Safestrap slot, modem stuck across reboot. Rerooting was necessary, although root wasn't lost (go figure). Data and service are enabled just fine. Will try going back to MJ6 modem
Click to expand...
Click to collapse
So give DeadlySin9 a Thanks for testing.
FOR MK2 SAFESTRAP USERS
THANKS to Churapa for letting us know these DO work for the newer safestrap as well. Here is his comments and how he did it.
churapa said:
I can confirm that the modems work on Safestrap 3.71, I am running in the Stock strap the ROM SHostock v3.0 which is MK2 v4.3 and flashed the MJ6 modem from OP and my signal reception increased dramatically for the best.
Click to expand...
Click to collapse
I am putting these ATT I337 16GB and 32GB pit file here as a repository for anyone that may need it in the future. Please use at your OWN RISK and KNOW WHAT your doing and WHEN to use these to save your phones life. PLEASE do your research before using these to flash with Odin. They CAN ruin your device if used wrong or use the wrong one.
I337 ATT 32 GB PIT FILE REPOSITORY (Pulled from my 32GB I337)
DOWNLOAD LINK http://d-h.st/le3
I337 ATT 16GB PIT FILE REPOSITORY
DOWNLOAD LINK http://d-h.st/zxW
Thanks to "mbonus" and "Beast330" for getting us the 16GB pit files.
I am thinking there is no difference between the 16GB and 32GB pit file as they are exactly the same size and have the same exact md5 even though pulled from different phones.
Any difference over mf3? Is it worth flashing?
Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!
Capt said:
Any difference over mf3? Is it worth flashing?
Click to expand...
Click to collapse
In my experience modems can be better or worse. It all depends on where your located in the country. What works good for one person may not work good for another. The choice of having more modems to flash can increase or decrease your data speeds/call quality.
It does not hurt to try out modems and find which one works best for you in your particular region.
You can always flash back just as easy with the exact same modem you had if it doesn't work better for you.
Sent from My Spiderman Themed I337
I believe this will also help out with all the ATT users getting data drops on 4.3 with earlier modems. Trying this out now with echoe rom
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
How about sending mms/sms...any issues?
Calls, LTE, SMS, MMS, etc. all working for me.
This modem does seem a bit better, but I'll have to try it for a few days to be sure.
Venom0642 said:
Seems better not sure yet will know tomorrow see how it goes , But i would say you need it for any 4.3 Rom to work better since now we should be seeing a AT&T 4.3!
Click to expand...
Click to collapse
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven
RockRatt said:
Thanks to Design Gears for his leaked MJ6 4.3 ATT Firmware.
I extracted the modem and put it into a flashable zip to be used in cwm/twrp recoveries.
Link to Dev Host http://d-h.st/Bot
Link to dropbox https://db.tt/jM6yALXs
EDIT: I flashed it on Vision MJ5 Rom Firmware version 4.3 and so far so good. Then I flashed back to MF3 firmware ROM ShoStock 4.2.2 and flashed it and it worked on 4.2.2 as well.
Sent From My Spiderman Themed I337
Click to expand...
Click to collapse
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.
mrnovanova said:
Flashed it with twrp but it didn't stick. Baseband still reads MG1. What should I do. Try again. Sorry to bother you again Venom
Carried by a Raven
Click to expand...
Click to collapse
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good
trueking7 said:
Do you have an i337m? That's probably why it didn't stick because this modem is for i337 AT&T users.
Sent from my SGH-I337M running Omega v9 with Faux v12u : good
Click to expand...
Click to collapse
Facepalm makes sense
Carried by a Raven
rfb813 said:
Thanks, Do you have a recovery flashable zip for the MDL modem? In case I want to flash back.
Click to expand...
Click to collapse
Yes I do but they also can be found on the modem thread in the dev section. There is MDL/mdb/and mf3 if I remember correctly. If you need them send me a PM
Sent from My Spiderman Themed I337
I couldn't get the aws mod to work on this modem. keeps giving error of invalid command after it gets to 5%.
Can anyone else confirm?
While I didn't notice a difference when I switched from mdl to mf3, I do think mj6 shows an improvement in signal. Time will tell but so far it seems better.
Thanks, RockRatt.
Sent from my SGH-I337 using xda premium
Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
sk8trix said:
Can i use it on my tw 4.2 build
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Click to expand...
Click to collapse
See OP...it says it works on 4.2.2
sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
Lol oh wow sorry damn party foul
sykoj82 said:
See OP...it says it works on 4.2.2
Click to expand...
Click to collapse
That would entail reading a whole page back
immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4
p1gp3n said:
immediately seeing better reception in my area. thanks.
ViSiON-X II AT&T S4
Click to expand...
Click to collapse
Good to hear. This is why I always try new modems. Then if they don't work out for me I can always flash back to the previous one that worked better
Sent From My Spiderman Themed I337
Hi All..
Just bought a used S5 yesterday. It was rooted and running ND2.
I replaced whatever recovery was on it (didnt recognize it) with Philz. No problem. Then I downloaded an installed @CNexus Stock NE5 rom. Again, no problem.
It then struck me that this didn't include the modem... just the ROM...
So question #1... can I flash just the modem? Is it available someplace? I've tried searching and cannot find it.
Question #2... I notice that my software version says G900PVPU1AND2, but my Build # is KOT49H.G900PVPU1ANE5.
So now I'm slighly confused as to whether I'm running ND2 or NE5... something seems out of whack here.
Can someone clarify? Thanks.
Modem can be found here http://forum.xda-developers.com/showthread.php?p=53548814.
Software version is the modem version, yeah I know odd term for the modem.
Sent from my SM-G900P using Tapatalk
crawrj said:
Modem can be found here http://forum.xda-developers.com/showthread.php?p=53548814.
Software version is the modem version, yeah I know odd term for the modem.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Helpful as always... thanks crawrj. Worked like a charm!
Long story short.
Was running a 4.1.2 which worked well but wanted to go to KK.
Installed Gummy M3 4.4.4, absolutely love it, no issues except cell signal seems considerably worse than before. Baseband is VRBLMD3.
Not sure if firmware/baseband is accurate for 4.4 or if there's something I can flash to try and rectify. A little confused overall on the whole verizon modem thing. I had a captivate on ATT before and I just flashed any of the 30 different modems via recovery to help with signal issues.
Would appreciate any help.
I've read more than one topic on this same issue. Not sure what the solution is however. Maybe update the modem to something new? I wouldn't go beyond ML1 however
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
ShapesBlue said:
I've read more than one topic on this same issue. Not sure what the solution is however. Maybe update the modem to something new? I wouldn't go beyond ML1 however
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Yes.
Flash mf1 aio then ml1 modem. Should give a better signal.
All the links to newer modems appear to be dead. I looked around quite a bit. I'd be grateful if someone can provide a dropbox link or similar.
Edit: It appears invisiblek's site is down and that's where all the AIO packages are linked to. Does anyone have any links to other mirrors?
jayjr1105 said:
All the links to newer modems appear to be dead. I looked around quite a bit. I'd be grateful if someone can provide a dropbox link or similar.
Edit: It appears invisiblek's site is down and that's where all the AIO packages are linked to. Does anyone have any links to other mirrors?
Click to expand...
Click to collapse
Here's what I found on his dev host page. Newest is ML1
http://d-h.st/users/invisiblek/?fld_id=35606#files
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Is that modem only? Don't I need to flash an aio first?
Thanks for finding that btw
jayjr1105 said:
Is that modem only? Don't I need to flash an aio first?
Thanks for finding that btw
Click to expand...
Click to collapse
You should update mf1 first, or find MB1 aio. Then flash ml1 modem.
jayjr1105 said:
Is that modem only? Don't I need to flash an aio first?
Thanks for finding that btw
Click to expand...
Click to collapse
Yes they are the modems only. After looking I only found the MB1 AIO
http://d-h.st/users/invisiblek/?fld_id=0#files
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
ShapesBlue said:
Yes they are the modems only. After looking I only found the MB1 AIO
http://d-h.st/users/invisiblek/?fld_id=0#files
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
I think I found it. I just googled mf1.aio.zip and found this guys post. It doesn't have AIO in the name though... http://forum.xda-developers.com/showpost.php?p=52434920&postcount=2
Think it's legit?
Modem + NON-HILOS
Extract rar/zip file
Flash with Odin. You may need to flash it twice.
Enjoy.
OA1 modem:
https://mega.nz/#!L45klT7S!ZmpO-NwadNrYgMsYgd0kRpCmneLLeLBSturkt-a-rFI
NK1 modem:
https://mega.co.nz/#!HlJXkSIK!RB93ncfZFBACZYfqc72wz-9FWx4lFg30d4sPcWvJ0NI
NI2 modem:
https://mega.co.nz/#!i4BFBTIb!14g7fp8lph0j5T4sfz1AHSChuZqTFUz8V00se0Fqn7s
Where did this come from? Anyone test on Rogers?
cantenna said:
Where did this come from? Anyone test on Rogers?
Click to expand...
Click to collapse
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Yes, I'm on NI1 as well, thanks
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
ma678 said:
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
There all multi-csc aren't they? Just asking cause its the first time I heard this term.
So it should work with Rogers. I'll give it a try later this afternoon
cantenna said:
There all multi-csc aren't they? Just asking cause its the first time I heard this term.
So it should work with Rogers. I'll give it a try later this afternoon
Click to expand...
Click to collapse
The modem definitely works with Rogers.
The NI2 rom has all Canadian GSM carriers and quite a few more carriers. By default it flashes Bell. I tried Telus and then stick with Fido.
Sent from my SGH-I337M using Tapatalk
Confirmed Working fine here with MDJ & NH1 bootloader Rogers network
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
Bootloader = VLUFNE1
Modem = VLUFNI2
Non-HILOS = VLUFNI2
Working well, no improvements compared to UMUFNI1 or UMUFNE3. The dBm readings are about the same, but at least this is the official Canadian modem.
ma678 said:
This is a multi-csc rom. I flashed it and changed its csc to fido.
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
My friend how you changed the CSC ???
Dial *#272*imei# on your keypad.
omek07 said:
My friend how you changed the CSC ???
Click to expand...
Click to collapse
if not better is it stable-er?
Im on a 337m that I picked up used and was on ne1.
So anyway I gave it a few days on stock- cell n data worked fine. Im actually getting up to 15 mbps on wind, wow. Tried goldfinger rom by ibastid and great but lacking some stuff I was used to like the tw refusing to rotate. Tried hyperdrive and wow feature rich. but I lose signal every now n then or upon a reboot. Like randomly once a day or so, toggling flight mode gets it back instantly. But modem issue yall think? Dont know if there is something I can tweak in ktoonzez
Loosing signal every so often, that's because your on wind network. I used to be o. Wind network as well and had this issue. Went away after switching to Rogers.
Rogers/Fido firmware was also updated last night. Basically they are all the same, though.
liquidzyklon said:
Apparently this version of the firmware was released for Telus/Koodo/Bell/Virgin on Sept 29 per SamMobile. I would assume that a Rogers version should be release shortly.
I have a Telus I337M but waiting for some feedback prior to flashing. I am currently on VLUFNE1 bootloader running UMUFNI1 modem.
Click to expand...
Click to collapse
cantenna said:
Where did this come from? Anyone test on Rogers?
Click to expand...
Click to collapse
cantenna said:
Loosing signal every so often, that's because your on wind network. I used to be o. Wind network as well and had this issue. Went away after switching to Rogers.
Click to expand...
Click to collapse
Can not enable WiFi
I have rooted Fido Samsung Galaxy S4. Today I have updated it to NI2 firmware using Kies3.
When update finished, my modem was still showing NE1 and WiFi did not work.
I flashed NI2 model file (from the first post) using Odin.
Now both Firmware and baseband version show NI2, however WiFi is still disabled and I can not get it to work.
Already tried to to reflash NI2 modem with Odin for a few times, but it does not solve the problem.
Could someone please help me to solve this issue ?
Thanks!
Why would u update using kies?
fmark said:
I have rooted Fido Samsung Galaxy S4. Today I have updated it to NI2 firmware using Kies3.
When update finished, my modem was still showing NE1 and WiFi did not work.
I flashed NI2 model file (from the first post) using Odin.
Now both Firmware and baseband version show NI2, however WiFi is still disabled and I can not get it to work.
Already tried to to reflash NI2 modem with Odin for a few times, but it does not solve the problem.
Could someone please help me to solve this issue ?
Thanks!
Click to expand...
Click to collapse
I had the same problem after upgrade. Here is what I did.
Odin the full rom. Downgrade modem following the website:
http://www.w0lfdroid.com/2014/09/To...-and-Note3-Android-4.4.2-NF-or-Later.html?m=1
Root phone with TowelRoot. Install SuperSu and twrp recovery. Odin back NI2 modem. Install a customized kernel. I tested Adam and Alucard working on wifi.
Note: you will probably have to turn off Smart Connect to keep wifi staying. Try it first before you start to Odin the stock firmware.
Good luck.
Sent from my SGH-I337M using Tapatalk
Thanks! In the end I just backed everything up with Titanium and did hard reset and then restore. Now WiFi works.
anyone got changelog for new update
nabbasi said:
anyone got changelog for new update
Click to expand...
Click to collapse
All I've read online is that Google Play Services have been updated. And this Play Services update really does a number on the battery life. I haven't installed it yet, can't seem to find much info about this update.