I'm running SlimRom 1.9 (AOSP 4.3 not KitKat) with the MF1 modem. I live in an area with somewhat poor reception, so data speeds are very low in my apartment. But recently I've been getting too many dropped calls, nearly every call has problems.
What are my best options at this point?
1. update to ML1 modem (not firmware) and keep using AOSP
2. switch to 4.3 TW rom and ML1
Any other things to try?
ECrispy said:
I'm running SlimRom 1.9 (AOSP 4.3 not KitKat) with the MF1 modem. I live in an area with somewhat poor reception, so data speeds are very low in my apartment. But recently I've been getting too many dropped calls, nearly every call has problems.
What are my best options at this point?
1. update to ML1 modem (not firmware) and keep using AOSP
2. switch to 4.3 TW rom and ML1
Any other things to try?
Click to expand...
Click to collapse
Try both, see which you like better.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Try both, see which you like better.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Concerned about losing root etc if I go to 4.3
ECrispy said:
Concerned about losing root etc if I go to 4.3
Click to expand...
Click to collapse
You won't.
As long as you flash the ml1 modem you'll have no issues at all. Just don't flash anything that says ml1 firmware or ml1 ota stock rom.
Sent from my SCH-I535 using Tapatalk 2
Related
Recommend add-ons by Beanstown106
I535VRBMB1 Modem can be found HERE!
I535VRBMB1 RPM can be found HERE!
^^^ What are these? They're the "recommended add-ons" by JellyBeans at the bottom of the CleanROM post. Anyone know what these are. Is this a radio and something else?
Just curious, if I should flash these or not.
newest modem & radio/
flash them in ^this order////
The VRBMB1 modem and rpm were included Verizon's OTA update from 4.1.1 to 4.1.2. From what I've read, most people have experienced better data reception after flashing these, but some think it made things worse. I've flashed them and don't notice any difference in data, but possibly better GPS reception.
SempaiMatt said:
The VRBMB1 modem and rpm were included Verizon's OTA update from 4.1.1 to 4.1.2. From what I've read, most people have experienced better data reception after flashing these, but some think it made things worse. I've flashed them and don't notice any difference in data, but possibly better GPS reception.
Click to expand...
Click to collapse
I was updated to 4.1.2 before I flashed the CleanROM, so I should already have these then?
Spewed said:
I was updated to 4.1.2 before I flashed the CleanROM, so I should already have these then?
Click to expand...
Click to collapse
You should. If you go into Settings / About Phone, and the Baseband version (I think that's the modem) should say I535VRBMB1.
SempaiMatt said:
You should. If you go into Settings / About Phone, and the Baseband version (I think that's the modem) should say I535VRBMB1.
Click to expand...
Click to collapse
Great, thanks. I already do then.
Where can you get the newest radio then? I've flashed the newest modem from goo.im or some website like it, I forgot. But I never saw anything about getting the radio.... Was it kinda a package deal?
Sent from my SCH-I535 using xda app-developers app
Download the radio on the cleanrom page in the android development section. If you're wanting that particular radio. If you have Verizon and update to 4.1.2 then you already have them as established.
Sent from my SCH-I535 using xda app-developers app
Brightness Toggle
Is there anything I can do to fix the brightness toggle on the quick settings panel? For some reason it will only cycle between auto and full brightness and nothing in between...no matter which setting I put it on. Anyone know if there is an additional download for this?
Spewed said:
Download the radio on the cleanrom page in the android development section. If you're wanting that particular radio. If you have Verizon and update to 4.1.2 then you already have them as established.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
When I first got my S3 for Christmas, I immediately upgraded it to 4.1.2 and then rooted about a week later and installed CleanROM a day or two later! As of right now I'm running JellyBeans 13, but when I check the baseband version it says VRBLK3....should I update the modem and radio to the newest one? I'm always the first one to say if it ain't broke then don't fix it....are there any real benefits? Everything works great for me....Bluetooth, GPS, Wi-Fi, etc...
Sent from my SCH-I535 using Tapatalk 2
vmancini3 said:
When I first got my S3 for Christmas, I immediately upgraded it to 4.1.2 and then rooted about a week later and installed CleanROM a day or two later! As of right now I'm running JellyBeans 13, but when I check the baseband version it says VRBLK3....should I update the modem and radio to the newest one? I'm always the first one to say if it ain't broke then don't fix it....are there any real benefits? Everything works great for me....Bluetooth, GPS, Wi-Fi, etc...
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Its up to u to update. I'm sure u only updated to 4.1.1 because 4.1.2 just rolled out recently. If its working fine don't worry about it.
Sent from my SCH-I535 using xda app-developers app
Hi All
I have been having issues with my camera, which I thought were strictly issues with cm10.1.2 and nightlies...but I have flashed liquid and clean stock rom (rooted), and have the same issue.
when I try to use the camera, i get error. Warning: Camera Failed, on other roms I was getting Camera Error: camera unable to to connect ...failed error...not sure what to do here All the kernels change when the roms change..
radio is MF1
cevil203 said:
Hi All
I have been having issues with my camera, which I thought were strictly issues with cm10.1.2 and nightlies...but I have flashed liquid and clean stock rom (rooted), and have the same issue.
when I try to use the camera, i get error. Warning: Camera Failed, on other roms I was getting Camera Error: camera unable to to connect ...failed error...not sure what to do here All the kernels change when the roms change..
radio is MF1
Click to expand...
Click to collapse
So you're on a mf1 stock rooted rom?
Try to flash a recent custom kernel.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
So you're on a mf1 stock rooted rom?
Try to flash a recent custom kernel.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I just tried flashing both leankernal (TW) and KT747 (TW)...same problem on both . And yes mf1 rooted stock
cevil203 said:
I just tried flashing both leankernal (TW) and KT747 (TW)...same problem on both . And yes mf1 rooted stock
Click to expand...
Click to collapse
This is different than what I've seen, have you flashed the newest cm10 nightly and gave it a go? Everything sounds like it should be working. I know a lot of nightlies have been giving people camera issues.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
This is different than what I've seen, have you flashed the newest cm10 nightly and gave it a go? Everything sounds like it should be working. I know a lot of nightlies have been giving people camera issues.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I've tried the newest nightly, 10.1.2, liquid smooth, clean rom (stock rooted)...multiple kernals...reflashed mf1, fixing permissions....nothing is working...i'm lost at this point.
cevil203 said:
I've tried the newest nightly, 10.1.2, liquid smooth, clean rom (stock rooted)...multiple kernals...reflashed mf1....nothing is working...i'm lost at this point.
Click to expand...
Click to collapse
Have you gone completely back to stock with Odin? I'm confused if you used a stock rooted rom or cleanRom.
If an odin back to stock doesn't work I'm out of ideas.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Have you gone completely back to stock with Odin? I'm confused if you used a stock rooted rom or cleanRom.
If an odin back to stock doesn't work I'm out of ideas.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I am using CleanRom. I had previously used odin to get back to stock when I had issues with losing my iemi. My camera worked then briefly on 10.1 but its been downhill since
cevil203 said:
I am using CleanRom. I had previously used odin to get back to stock when I had issues with losing my iemi. My camera worked then briefly on 10.1 but its been downhill since
Click to expand...
Click to collapse
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the input, seems like the end of the road when resorting to that
BadUsername said:
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
so I odin'd back to stock, and the same problem continues
cevil203 said:
so I odin'd back to stock, and the same problem continues
Click to expand...
Click to collapse
Flash the latest firmware.
Sent from my SCH-I535 using Tapatalk 2
It sounds like a hardware issue at this point.
Sent from my SCH-I535 using xda premium
Watoy said:
It sounds like a hardware issue at this point.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I agree, I can't think of any reason why it wouldn't work after all that.
Sent from my SCH-I535 using Tapatalk 2
so today, the camera starts working. what the... cleanrom 7
EDIT...and now its not working again...
If it is working then suddenly not in the same day I'm leaning toward hardware issue. Have you tried restoring to stock but not the newest update? Try a older firmware. I had a friend I helped root his s3 and there was a issue with the newest firmware giving this error when flashing custom roms since the roms were based off the older firmware. Hope this helps if not I'm sorry about your phone
Sent from my SCH-I605 using xda app-developers app
cevil203 said:
so today, the camera starts working. what the... cleanrom 7
EDIT...and now its not working again...
Click to expand...
Click to collapse
ems3 said:
If it is working then suddenly not in the same day I'm leaning toward hardware issue. Have you tried restoring to stock but not the newest update? Try a older firmware. I had a friend I helped root his s3 and there was a issue with the newest firmware giving this error when flashing custom roms since the roms were based off the older firmware. Hope this helps if not I'm sorry about your phone
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Tacking onto what @ems3 posted, you could try this as well which involves Odin and flashing the pit file. Disregard everything after the first post as there was an unnecessary discussion that quickly followed.
SlimSnoopOS said:
Tacking onto what @ems3 posted, you could try this as well which involves Odin and flashing the pit file. Disregard everything after the first post as there was an unnecessary discussion that quickly followed.
Click to expand...
Click to collapse
thanks for the tip...i will look into it, but today the camera seems to be working
I aslo have camera errors today after flashing the Synergy ROM (r484). I'm set on this ROM because it is the only one I've found that will
Support other cell carriers on a Verizon SCH-I535 and I need to switch carriers in a couple of days. Some one in a developer thread said that it should get the older firmware flashed to fix the camera or else I could choose to change the kernal. My firmware is I535VRBMF1 and what was sugested was MB1 firmware. I have several questions. What would I risk or loose by going to the older firmware? How do I get it and flash it (I have Odin but haven't used it yet). The Kernal came with Synergy ROM and is refered to as Ziggy's.
mj79 said:
I aslo have camera errors today after flashing the Synergy ROM (r484). I'm set on this ROM because it is the only one I've found that will
Support other cell carriers on a Verizon SCH-I535 and I need to switch carriers in a couple of days. Some one in a developer thread said that it should get the older firmware flashed to fix the camera or else I could choose to change the kernal. My firmware is I535VRBMF1 and what was sugested was MB1 firmware. I have several questions. What would I risk or loose by going to the older firmware? How do I get it and flash it (I have Odin but haven't used it yet). The Kernal came with Synergy ROM and is refered to as Ziggy's.
Click to expand...
Click to collapse
You don't stand to lose anything except possibly data connection and speed, and signal strength and quality. You can find the all in one (AIO) zips from Invisiblek's thread, just flash VRBMB1 aio in recovery. Invisiblek does not make any of these that are Odin flashable for JB and beyond.
SlimSnoopOS said:
You don't stand to lose anything except possibly data connection and speed, and signal strength and quality. You can find the all in one (AIO) zips from Invisiblek's thread, just flash VRBMB1 aio in recovery. Invisiblek does not make any of these that are Odin flashable for JB and beyond.
Click to expand...
Click to collapse
:good:Thanks a bunch. I'm going to flash it now.
Just have a quick question. I'm not really all up to date with how the radios work but the new I535VRUCML1 is abler to be flashed I'm on 1535vrbmf1. If I flash the new radio will I still be able to use 4.1.2 roms or only be able to use 4.3?
It would be wise to stay on the MF1 baseband until you decide you want a 4.3 TW ROM. I Was on an AOSP 4.4 ROM with MF1 and had no problems.
bsannes said:
Just have a quick question. I'm not really all up to date with how the radios work but the new I535VRUCML1 is abler to be flashed I'm on 1535vrbmf1. If I flash the new radio will I still be able to use 4.1.2 roms or only be able to use 4.3?
Click to expand...
Click to collapse
You cannot be on anything older than a 4.3 ROM with the ML1 radio... you WILL brick.
There is a ML1 radio available for download and all you have to do is flash it in recovery. But like I said, you must be on a 4.3-4.4 based ROM to flash it without bricking.
Sent from my SCH-I535 using xda app-developers app
Ok great thank you. So if I try a 4.3 ROM and decide to go back to 4.1 or restore my ROM I should also flash the old mf1.
Sent from my SCH-I535 using Tapatalk
RBarnett09 said:
You cannot be on anything older than a 4.3 ROM with the ML1 radio... you WILL brick.
There is a ML1 radio available for download and all you have to do is flash it in recovery. But like I said, you must be on a 4.3-4.4 based ROM to flash it without bricking.
Click to expand...
Click to collapse
That's not true, at least not for all phones. I flashed the ML1 radio while running a 4.1.2 Touchwiz ROM and everything worked fine. My signal and data speeds seemed worse than on the MF1 radio though, so I flashed back.
bsannes said:
Ok great thank you. So if I try a 4.3 ROM and decide to go back to 4.1 or restore my ROM I should also flash the old mf1.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Correct.
Here's the link for ML1:
http://invisiblek.org/sch-i535/modems/d2vzw_ML1_modem.zip
Jacquestrapp said:
That's not true, at least not for all phones. I flashed the ML1 radio while running a 4.1.2 Touchwiz ROM and everything worked fine. My signal and data speeds seemed worse than on the MF1 radio though, so I flashed back.
Click to expand...
Click to collapse
I could be wrong but from what I've read, many people must be extra careful about what radios they flash and when... especially with ML1... for some reason.
Sent from my SCH-I535 using xda app-developers app
Ml1 radio will work fine on any rom you run. If you took the OTA update, then you are unable to flash any radios since you have the entire ML1 firmware. The bootloader needs every part of the firmware in order to boot.
Since the flashable zip is only the radio for ML1, there's no danger of this doing any harm or bricking your phone. People have reported much better signal strength when using the ML1 radio with the MF1 firmware on 4.3 roms. I would stay on MF1 if using a 4.1.2 rom. I'm actually still using MB1.
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 12:10 PM ---------- Previous post was at 11:56 AM ----------
RBarnett09 said:
I could be wrong but from what I've read, many people must be extra careful about what radios they flash and when... especially with ML1... for some reason.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You're mostly right, if you flash the entire ML1 firmware you will brick, and that will cause problems when you run a 4.1.2 rom. Flashing the modem only has no bad effects except for possibly decreased signal strength.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
You're mostly right, if you flash the entire ML1 firmware you will brick, and that will cause problems when you run a 4.1.2 rom. Flashing the modem only has no bad effects except for possibly decreased signal strength.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
RBarnett09 said:
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It's possible, but you aren't going to do any harm testing it out.
Sent from my SCH-I535 using Tapatalk 2
RBarnett09 said:
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
BadUsername said:
It's possible, but you aren't going to do any harm testing it out.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
VRUCML1 should work a little better on AOSP than VRBMF1 so long as it includes commits like this
I have a Verizon GS3 and had Clean Rom 6 installed for over a year with no problems. Last week I decided to flash to Clean Rom 8 and often during the day at random times I'd all of a sudden have no network coverage - 1x, 3g, or 4g. The only thing that would get it back was putting it in Airplane mode and then taking it out. I wasn't sure if it was the Rom so I flashed today to the SlimKat Rom based off of Kit Kat and i'm having the same problems. Is there something with my radio/antenna that i needed to do as well? Like i said i had zero problems with this before I moved to a new Rom last week.
Thanks
srudoff said:
I have a Verizon GS3 and had Clean Rom 6 installed for over a year with no problems. Last week I decided to flash to Clean Rom 8 and often during the day at random times I'd all of a sudden have no network coverage - 1x, 3g, or 4g. The only thing that would get it back was putting it in Airplane mode and then taking it out. I wasn't sure if it was the Rom so I flashed today to the SlimKat Rom based off of Kit Kat and i'm having the same problems. Is there something with my radio/antenna that i needed to do as well? Like i said i had zero problems with this before I moved to a new Rom last week.
Thanks
Click to expand...
Click to collapse
Yes.
Make sure you're on the mf1 aio, then flash the ml1 modem. Should fix your issues with cleanrom 8.
Sent from my SCH-I535 using Tapatalk 2
is there an easy way to check to see if i'm on the mf1 aio?
srudoff said:
is there an easy way to check to see if i'm on the mf1 aio?
Click to expand...
Click to collapse
Go into settings > about device
Then see what the baseband says.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Go into settings > about device
Then see what the baseband says.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
it says i535vrlhe
thanks a ton for the help
srudoff said:
it says i535vrlhe
thanks a ton for the help
Click to expand...
Click to collapse
That is really old.
Go here and flash the mf1 aio. Reboot the phone, check again to make sure you're on the correct mf1 baseband, then flash the ml1 modem:
http://forum.xda-developers.com/showthread.php?t=1788313
Then check to see if you have improved data connections.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
That is really old.
Go here and flash the mf1 aio. Reboot the phone, check again to make sure you're on the correct mf1 baseband, then flash the ml1 modem:
http://forum.xda-developers.com/showthread.php?t=1788313
Then check to see if you have improved data connections.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
worked great! thanks!
I'm on the ML1 modem with my S3, running Carbonrom (4.4.2). What benefits are there to flashing the NE1 modem - if any? Searched but there are surprisingly few references to the NE1 modem.
File is d2vzw_NE1_modem.zip, 19.4 MB.
vlucchetti said:
I'm on the ML1 modem with my S3, running Carbonrom (4.4.2). What benefits are there to flashing the NE1 modem - if any? Searched but there are surprisingly few references to the NE1 modem.
File is d2vzw_NE1_modem.zip, 19.4 MB.
Click to expand...
Click to collapse
Same as any other modem: potentially better signal strength, call quality, and data speed, and life. Usually isn't that significant of a change though.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Same as any other modem: potentially better signal strength, call quality, and data speed, and life. Usually isn't that significant of a change though.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Thanks, thought about as much but wanted some opinion.
If it helps I am still on ml1 modem using Spirit 1.5 ROM.