Just have a quick question. I'm not really all up to date with how the radios work but the new I535VRUCML1 is abler to be flashed I'm on 1535vrbmf1. If I flash the new radio will I still be able to use 4.1.2 roms or only be able to use 4.3?
It would be wise to stay on the MF1 baseband until you decide you want a 4.3 TW ROM. I Was on an AOSP 4.4 ROM with MF1 and had no problems.
bsannes said:
Just have a quick question. I'm not really all up to date with how the radios work but the new I535VRUCML1 is abler to be flashed I'm on 1535vrbmf1. If I flash the new radio will I still be able to use 4.1.2 roms or only be able to use 4.3?
Click to expand...
Click to collapse
You cannot be on anything older than a 4.3 ROM with the ML1 radio... you WILL brick.
There is a ML1 radio available for download and all you have to do is flash it in recovery. But like I said, you must be on a 4.3-4.4 based ROM to flash it without bricking.
Sent from my SCH-I535 using xda app-developers app
Ok great thank you. So if I try a 4.3 ROM and decide to go back to 4.1 or restore my ROM I should also flash the old mf1.
Sent from my SCH-I535 using Tapatalk
RBarnett09 said:
You cannot be on anything older than a 4.3 ROM with the ML1 radio... you WILL brick.
There is a ML1 radio available for download and all you have to do is flash it in recovery. But like I said, you must be on a 4.3-4.4 based ROM to flash it without bricking.
Click to expand...
Click to collapse
That's not true, at least not for all phones. I flashed the ML1 radio while running a 4.1.2 Touchwiz ROM and everything worked fine. My signal and data speeds seemed worse than on the MF1 radio though, so I flashed back.
bsannes said:
Ok great thank you. So if I try a 4.3 ROM and decide to go back to 4.1 or restore my ROM I should also flash the old mf1.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Correct.
Here's the link for ML1:
http://invisiblek.org/sch-i535/modems/d2vzw_ML1_modem.zip
Jacquestrapp said:
That's not true, at least not for all phones. I flashed the ML1 radio while running a 4.1.2 Touchwiz ROM and everything worked fine. My signal and data speeds seemed worse than on the MF1 radio though, so I flashed back.
Click to expand...
Click to collapse
I could be wrong but from what I've read, many people must be extra careful about what radios they flash and when... especially with ML1... for some reason.
Sent from my SCH-I535 using xda app-developers app
Ml1 radio will work fine on any rom you run. If you took the OTA update, then you are unable to flash any radios since you have the entire ML1 firmware. The bootloader needs every part of the firmware in order to boot.
Since the flashable zip is only the radio for ML1, there's no danger of this doing any harm or bricking your phone. People have reported much better signal strength when using the ML1 radio with the MF1 firmware on 4.3 roms. I would stay on MF1 if using a 4.1.2 rom. I'm actually still using MB1.
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 12:10 PM ---------- Previous post was at 11:56 AM ----------
RBarnett09 said:
I could be wrong but from what I've read, many people must be extra careful about what radios they flash and when... especially with ML1... for some reason.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You're mostly right, if you flash the entire ML1 firmware you will brick, and that will cause problems when you run a 4.1.2 rom. Flashing the modem only has no bad effects except for possibly decreased signal strength.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
You're mostly right, if you flash the entire ML1 firmware you will brick, and that will cause problems when you run a 4.1.2 rom. Flashing the modem only has no bad effects except for possibly decreased signal strength.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
RBarnett09 said:
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
It's possible, but you aren't going to do any harm testing it out.
Sent from my SCH-I535 using Tapatalk 2
RBarnett09 said:
Thanks for the extra info man.
You're a lot of help, even the other day.
Do you think ML1 would be any better for me than MR1 on an AOSP 4.4 ROM?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
BadUsername said:
It's possible, but you aren't going to do any harm testing it out.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
VRUCML1 should work a little better on AOSP than VRBMF1 so long as it includes commits like this
Related
Recommend add-ons by Beanstown106
I535VRBMB1 Modem can be found HERE!
I535VRBMB1 RPM can be found HERE!
^^^ What are these? They're the "recommended add-ons" by JellyBeans at the bottom of the CleanROM post. Anyone know what these are. Is this a radio and something else?
Just curious, if I should flash these or not.
newest modem & radio/
flash them in ^this order////
The VRBMB1 modem and rpm were included Verizon's OTA update from 4.1.1 to 4.1.2. From what I've read, most people have experienced better data reception after flashing these, but some think it made things worse. I've flashed them and don't notice any difference in data, but possibly better GPS reception.
SempaiMatt said:
The VRBMB1 modem and rpm were included Verizon's OTA update from 4.1.1 to 4.1.2. From what I've read, most people have experienced better data reception after flashing these, but some think it made things worse. I've flashed them and don't notice any difference in data, but possibly better GPS reception.
Click to expand...
Click to collapse
I was updated to 4.1.2 before I flashed the CleanROM, so I should already have these then?
Spewed said:
I was updated to 4.1.2 before I flashed the CleanROM, so I should already have these then?
Click to expand...
Click to collapse
You should. If you go into Settings / About Phone, and the Baseband version (I think that's the modem) should say I535VRBMB1.
SempaiMatt said:
You should. If you go into Settings / About Phone, and the Baseband version (I think that's the modem) should say I535VRBMB1.
Click to expand...
Click to collapse
Great, thanks. I already do then.
Where can you get the newest radio then? I've flashed the newest modem from goo.im or some website like it, I forgot. But I never saw anything about getting the radio.... Was it kinda a package deal?
Sent from my SCH-I535 using xda app-developers app
Download the radio on the cleanrom page in the android development section. If you're wanting that particular radio. If you have Verizon and update to 4.1.2 then you already have them as established.
Sent from my SCH-I535 using xda app-developers app
Brightness Toggle
Is there anything I can do to fix the brightness toggle on the quick settings panel? For some reason it will only cycle between auto and full brightness and nothing in between...no matter which setting I put it on. Anyone know if there is an additional download for this?
Spewed said:
Download the radio on the cleanrom page in the android development section. If you're wanting that particular radio. If you have Verizon and update to 4.1.2 then you already have them as established.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
When I first got my S3 for Christmas, I immediately upgraded it to 4.1.2 and then rooted about a week later and installed CleanROM a day or two later! As of right now I'm running JellyBeans 13, but when I check the baseband version it says VRBLK3....should I update the modem and radio to the newest one? I'm always the first one to say if it ain't broke then don't fix it....are there any real benefits? Everything works great for me....Bluetooth, GPS, Wi-Fi, etc...
Sent from my SCH-I535 using Tapatalk 2
vmancini3 said:
When I first got my S3 for Christmas, I immediately upgraded it to 4.1.2 and then rooted about a week later and installed CleanROM a day or two later! As of right now I'm running JellyBeans 13, but when I check the baseband version it says VRBLK3....should I update the modem and radio to the newest one? I'm always the first one to say if it ain't broke then don't fix it....are there any real benefits? Everything works great for me....Bluetooth, GPS, Wi-Fi, etc...
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Its up to u to update. I'm sure u only updated to 4.1.1 because 4.1.2 just rolled out recently. If its working fine don't worry about it.
Sent from my SCH-I535 using xda app-developers app
I was thinking of flashing this new AIO firmware (https://plus.google.com/u/0/104277415207525128383/posts/iAVpVPYqMtM) but I would like to be able to revert back to what I am currently using if something goes awry. How do I find out what I am running or where can I get firmwares?
tehloxely said:
I was thinking of flashing this new AIO firmware (https://plus.google.com/u/0/104277415207525128383/posts/iAVpVPYqMtM) but I would like to be able to revert back to what I am currently using if something goes awry. How do I find out what I am running or where can I get firmwares?
Click to expand...
Click to collapse
Been running that update for a day and a half and I have had 0 issues. I didn't have any reboots before, just wanted to be on the latest.
And I can't confirm 100% but I feel my battery is lasting a tad bit longer and I have slightly better signal.
Sent from my PACmaned SCH-I535
tehloxely said:
I was thinking of flashing this new AIO firmware (https://plus.google.com/u/0/104277415207525128383/posts/iAVpVPYqMtM) but I would like to be able to revert back to what I am currently using if something goes awry. How do I find out what I am running or where can I get firmwares?
Click to expand...
Click to collapse
Settings/About Phone/Baseband tells you your current modem. Baseband = modem = radio.
Invisiblek has a full list of modems in the VZW GSIII forums on Rootzwiki.
Sent from my SCH-I535 using xda app-developers app
SlimSnoopOS said:
Settings/About Phone/Baseband tells you your current modem. Baseband = modem = radio.
Invisiblek has a full list of modems in the VZW GSIII forums on Rootzwiki.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes... he is on the same radio as in all the roms... but if you read the post, there was an issue and it was causing the random reboots. The download link in the post fixes the reboot issue. It seems that the code is very old and everyone, if your random rebooting or not, should update. Like I said, I feel I have better service and better battery.
Sent from my PACmaned SCH-I535
Sorry, I'm a total noob. I don't really understand how the "Baseband Version" factors into the ROM/phone operation. Can someone explain it? I have a pretty good understanding of computers but when it comes to the phone it seems very black-boxy -- I'm still learning. My underlying question is:
The BoneStock ROM says: "BoneStock v3.0 (VRBMF1) 6/23/13", my phone currently has VRBMB1. Can I flash the BoneStock ROM on my phone or do I need to upgrade the Baseband Version somehow before I do that? I saw links to different revisions on the BoneStock thread but there isn't a whole lot of explanation about how to use them.
Thanks,
-Greg
Yes No problems. I ran mb1 on bonestock.
Sent from my SCH-I535 using xda premium
bbqsfire said:
Yes No problems. I ran mb1 on bonestock.
Click to expand...
Click to collapse
Cool, do you know what the Baseband firmware does? Should I flash my firmware to VRBMF1?
I flashed mine mf1 because it really did help signal and data speeds. In my opinion it is worth it to flash the mf1
Sent from my SCH-I535 using xda premium
bbqsfire said:
I flashed mine mf1 because it really did help signal and data speeds. In my opinion it is worth it to flash the mf1
Click to expand...
Click to collapse
Did you flash it before flashing BoneStock or does it matter what the order is?
Modem has no relation to what ROM you are on. You can flash whichever you want first, doesn't matter.
Sent from my SCH-I535 using Tapatalk 4 Beta
Hi, please PM me MB1 and MF1.
Thanks,
Hi All
I have been having issues with my camera, which I thought were strictly issues with cm10.1.2 and nightlies...but I have flashed liquid and clean stock rom (rooted), and have the same issue.
when I try to use the camera, i get error. Warning: Camera Failed, on other roms I was getting Camera Error: camera unable to to connect ...failed error...not sure what to do here All the kernels change when the roms change..
radio is MF1
cevil203 said:
Hi All
I have been having issues with my camera, which I thought were strictly issues with cm10.1.2 and nightlies...but I have flashed liquid and clean stock rom (rooted), and have the same issue.
when I try to use the camera, i get error. Warning: Camera Failed, on other roms I was getting Camera Error: camera unable to to connect ...failed error...not sure what to do here All the kernels change when the roms change..
radio is MF1
Click to expand...
Click to collapse
So you're on a mf1 stock rooted rom?
Try to flash a recent custom kernel.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
So you're on a mf1 stock rooted rom?
Try to flash a recent custom kernel.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I just tried flashing both leankernal (TW) and KT747 (TW)...same problem on both . And yes mf1 rooted stock
cevil203 said:
I just tried flashing both leankernal (TW) and KT747 (TW)...same problem on both . And yes mf1 rooted stock
Click to expand...
Click to collapse
This is different than what I've seen, have you flashed the newest cm10 nightly and gave it a go? Everything sounds like it should be working. I know a lot of nightlies have been giving people camera issues.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
This is different than what I've seen, have you flashed the newest cm10 nightly and gave it a go? Everything sounds like it should be working. I know a lot of nightlies have been giving people camera issues.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I've tried the newest nightly, 10.1.2, liquid smooth, clean rom (stock rooted)...multiple kernals...reflashed mf1, fixing permissions....nothing is working...i'm lost at this point.
cevil203 said:
I've tried the newest nightly, 10.1.2, liquid smooth, clean rom (stock rooted)...multiple kernals...reflashed mf1....nothing is working...i'm lost at this point.
Click to expand...
Click to collapse
Have you gone completely back to stock with Odin? I'm confused if you used a stock rooted rom or cleanRom.
If an odin back to stock doesn't work I'm out of ideas.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Have you gone completely back to stock with Odin? I'm confused if you used a stock rooted rom or cleanRom.
If an odin back to stock doesn't work I'm out of ideas.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I am using CleanRom. I had previously used odin to get back to stock when I had issues with losing my iemi. My camera worked then briefly on 10.1 but its been downhill since
cevil203 said:
I am using CleanRom. I had previously used odin to get back to stock when I had issues with losing my iemi. My camera worked then briefly on 10.1 but its been downhill since
Click to expand...
Click to collapse
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
BadUsername said:
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the input, seems like the end of the road when resorting to that
BadUsername said:
Ok, well if it worked then it's not like it's completely busted.
Try to odin completely back to stock: http://forum.xda-developers.com/showthread.php?t=1974114
This will ensure everything is perfectly stock, flash the mb1 image and then ota to mf1 and reroot, then once everything is on the mf1 base, only flash TW roms based on the mf1 base or use AOSP roms.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
so I odin'd back to stock, and the same problem continues
cevil203 said:
so I odin'd back to stock, and the same problem continues
Click to expand...
Click to collapse
Flash the latest firmware.
Sent from my SCH-I535 using Tapatalk 2
It sounds like a hardware issue at this point.
Sent from my SCH-I535 using xda premium
Watoy said:
It sounds like a hardware issue at this point.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I agree, I can't think of any reason why it wouldn't work after all that.
Sent from my SCH-I535 using Tapatalk 2
so today, the camera starts working. what the... cleanrom 7
EDIT...and now its not working again...
If it is working then suddenly not in the same day I'm leaning toward hardware issue. Have you tried restoring to stock but not the newest update? Try a older firmware. I had a friend I helped root his s3 and there was a issue with the newest firmware giving this error when flashing custom roms since the roms were based off the older firmware. Hope this helps if not I'm sorry about your phone
Sent from my SCH-I605 using xda app-developers app
cevil203 said:
so today, the camera starts working. what the... cleanrom 7
EDIT...and now its not working again...
Click to expand...
Click to collapse
ems3 said:
If it is working then suddenly not in the same day I'm leaning toward hardware issue. Have you tried restoring to stock but not the newest update? Try a older firmware. I had a friend I helped root his s3 and there was a issue with the newest firmware giving this error when flashing custom roms since the roms were based off the older firmware. Hope this helps if not I'm sorry about your phone
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Tacking onto what @ems3 posted, you could try this as well which involves Odin and flashing the pit file. Disregard everything after the first post as there was an unnecessary discussion that quickly followed.
SlimSnoopOS said:
Tacking onto what @ems3 posted, you could try this as well which involves Odin and flashing the pit file. Disregard everything after the first post as there was an unnecessary discussion that quickly followed.
Click to expand...
Click to collapse
thanks for the tip...i will look into it, but today the camera seems to be working
I aslo have camera errors today after flashing the Synergy ROM (r484). I'm set on this ROM because it is the only one I've found that will
Support other cell carriers on a Verizon SCH-I535 and I need to switch carriers in a couple of days. Some one in a developer thread said that it should get the older firmware flashed to fix the camera or else I could choose to change the kernal. My firmware is I535VRBMF1 and what was sugested was MB1 firmware. I have several questions. What would I risk or loose by going to the older firmware? How do I get it and flash it (I have Odin but haven't used it yet). The Kernal came with Synergy ROM and is refered to as Ziggy's.
mj79 said:
I aslo have camera errors today after flashing the Synergy ROM (r484). I'm set on this ROM because it is the only one I've found that will
Support other cell carriers on a Verizon SCH-I535 and I need to switch carriers in a couple of days. Some one in a developer thread said that it should get the older firmware flashed to fix the camera or else I could choose to change the kernal. My firmware is I535VRBMF1 and what was sugested was MB1 firmware. I have several questions. What would I risk or loose by going to the older firmware? How do I get it and flash it (I have Odin but haven't used it yet). The Kernal came with Synergy ROM and is refered to as Ziggy's.
Click to expand...
Click to collapse
You don't stand to lose anything except possibly data connection and speed, and signal strength and quality. You can find the all in one (AIO) zips from Invisiblek's thread, just flash VRBMB1 aio in recovery. Invisiblek does not make any of these that are Odin flashable for JB and beyond.
SlimSnoopOS said:
You don't stand to lose anything except possibly data connection and speed, and signal strength and quality. You can find the all in one (AIO) zips from Invisiblek's thread, just flash VRBMB1 aio in recovery. Invisiblek does not make any of these that are Odin flashable for JB and beyond.
Click to expand...
Click to collapse
:good:Thanks a bunch. I'm going to flash it now.
I'm currently running Hyperdrive RLS 16 and want to know if it is possible to go to [Rom][d2vzw][Official][Kitkat - 4.4.2] - Gummy - Nightly's?
Do I just need to follow the instructions or is there more files I need to change within the phone? Basically, I want to know if it will be a simple transition.
Thank You!
:crying:
You should be just fine. Just install like any other ROMs. Don't forget to wipe Data. Make sure you update your recovery to the latest version first BEFORE FLASHING since gummy is Kitkat. This is very important.
Sent from my SCH-I535 using Tapatalk
Cool thanks a ton!
GlitchMob said:
Cool thanks a ton!
Click to expand...
Click to collapse
There are so many people saying different things. Im on 2.4.4.0 is that okay?
GlitchMob said:
There are so many people saying different things. Im on 2.4.4.0 is that okay?
Click to expand...
Click to collapse
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
GlitchMob said:
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
Click to expand...
Click to collapse
I'm mistaken...badly. You need to be on TWRP 2.6.3.1 in order to flash any KitKat rom. That's what I'm on. KitKat roms will not flash on anything before TWRP 2.6.3.1.
Sent from my SCH-I535 using Tapatalk 4
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
What about CWM can i use that and if so which ver.?
razorr69 said:
What about CWM can i use that and if so which ver.?
Click to expand...
Click to collapse
Yes, the latest is up on the Rom Manager website.
Sent from my SCH-I535 using Tapatalk 4
Funny I had the same question..
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
cjmcsw87 said:
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
Click to expand...
Click to collapse
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Ok cool thanks snoop, as always you da man ! I'm still on MB1 so I kind of thought so. I Guess I'll give it a whirl after a few and post my results (from philZ)
GlitchMob said:
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Click to expand...
Click to collapse
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
david_hume said:
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
Click to expand...
Click to collapse
That kind of sucks. I'll probably just stick with the most current nightly till they come out with an official one.
Thanks for the response.
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
razorr69 said:
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
Click to expand...
Click to collapse
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Thats what i thought but wasn't %100 sure because mine is VRLHE. Should i flash it anyway to M1 modem only will i get better speeds and is the radio better. Eventually im going to flash 4.3 or 4.4 just waiting for a daily driver.