Hello, I have a Vodafone Smart 2 (Alcatel v860). I did backup with nanodroid and after that I tried to install KitKat Smart Rom from Alberto 96. After that I prefer to back in original ROM. And for that I format the device (system.img, boot.img, custopack.img etc) and installed those from backup. I was suprised when I tried to turn on device , stuck in the Android logo. I can't open the device in Recorvery mode and I can't install recorvery.img from PC 'cuz the PC can' open the device. Can you help me? A detailed help please...
Related
I installed alcatel ot6012x original ROM (from this tutorial: http://forum.xda-developers.com/showpost.php?p=50712669&postcount=418) and I didn't like it (my phone is an Orange Hiro). When I tried to backup the recovery files, the phone entered into bootloop (stuck in logo phone).
I can't enter in recovery mode because I did a factory reset, including TWRP Recovery Mode files.
I can't install the driver MTK, I dont know why because I have all drivers.
I dont have recovery.img and the others imgs.
Can anybody help me? I'm desperate.
Hi,
Can I suggest you to go here => Chef Central > Android > Alcatel One Touch Idol Mini 6012X (aka Orange Hiro)
And you can find all sources for your device here... => http://sourceforge.net/projects/alcatel/files/OT_6012X_20131213.tar.xz/download
and here => Alcatel One Touch support
I hope you will find some help about your problem, good luck
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....
hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed. pls help this frnd.
i tried to flash with sp flash tool with other phones stock rom having same processor mt6580. (format all + download)
first it was installed successfully but tablet is not opening.
so again tried download only but it shows as brom error s_ft_enable_dram_fail (0xfc0).
please help me friends
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
pls help me
Hi !
I see that you posted again here https://forum.xda-developers.com/an...rd-bricked-t3548246/post70826170#post70826170
Let`s keep everything in one place
Good luck !
thread closed
Hi....
I was on Chinese Firmware.
I was unlocked bootloader of m2 note.
Then i install twrp recovery( I created backup through twrp recovery ).
Then Flash LineageOS ROM.
Then i restore ( chinese firmware ) from twrp.
I found stock recovery of flyme 5 and I flashed this from Rashr.
Then i try to re-flash same chinese firmware(like normal update from update.zip from file manager).
it successfully upgraded(shown in phone screen), but not booted.
when i try to connect phone to pc, it connect and dis-connect automatically after 1-2 seconds.
i can't flash anything..(when i try to flash recovery, it downloaded in sp flash tool, but not flashed bcoz phone is disconnected.):crying::crying:
if anyone know the solution, plzzz tell me....
Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
VitorMac10 said:
Hello, I have a GT-S7560m (Galaxy Trend or Ace II)
Just tried to install the custom recovery too much times, I tried with TWRP official app and didn't worked, tried with ADB, but fastboot won't detect my phone on download mode, and finally tried with TWRP Manager App (here the brick), the APP said I already instaled a custom recovery (but I know not, this is my first time at rom flashing), and then the app asked me to reboot the phone, after reboot, the phone won't boot anymore!
Some specs are there the phone don't show up anything on the screen (like logo or information), don't vibrate, don't boot on recovery or download mode, BUT, any PC recognize it as Serial USB device (COM3, COM5, or COM6), but adb don't find anything!
I don't know whatever happened to my phone, I didn't tried to install custom rom, I was just taking a look at the custom recovery, that I don't installed too
And yeah, my phone was rooted, and I downloaded TWRP from official site, my device is supported, I found out twrp kyleve 3.0.0.0
What to do? It's not a Hard-Brick, I know it :crying:
Click to expand...
Click to collapse
Hello and welcome to xda-assist,
Please get further help on general help section...
http://forum.xda-developers.com/android/help
Good luck