hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed. pls help this frnd.
i tried to flash with sp flash tool with other phones stock rom having same processor mt6580. (format all + download)
first it was installed successfully but tablet is not opening.
so again tried download only but it shows as brom error s_ft_enable_dram_fail (0xfc0).
please help me friends
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
pls help me
Hi !
I see that you posted again here https://forum.xda-developers.com/an...rd-bricked-t3548246/post70826170#post70826170
Let`s keep everything in one place
Good luck !
thread closed
Related
so i tried flashing gravitymod's CMW to my W8 via SP flash tool. at first it did not work...after playing around i finally got CMW to load up and was able to flash the gravity mod rom...it turned out to be a cache error. well the rom booted up and quickly realized.........my phone would not recognize sim cards, there was no "reboot" option in the power menu and lastly no "navigation" app anymore .....and would not reboot to recovery from CMW
so being being that alot of issues were present i decided to re-flash everything with "SP Flash"
same issues were present... so desperately i just started trying stuff....dumb i know..
well in "SP Flash Tool" i went to the "Format" tab & accidentally hit "format whole flash"
so now the phone is completely bricked and wont power on. However my computer still recognizes the phone as "Mk usb device" or whatever.
"SP flash tool" wont let me flash anything and gives me this error...
""BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL(5054) [EMI] Obtain DRAM Failed! [HINT]: Please check your load matches to your target which is to be downloaded.""
THL's links are down for an official rom restore... and they have virtually no support. little to no info on the web.. and my work phone is useless....please help me... atleast get it to boot!!!!!!! im begging you guys!!! ill pay via paypal!!
lenovo s820
I have the same problem BROM Error (5054)
Happens after following this link h ttp: // w w w.indragunawan.com/2013/09/installing-miui-v5-rom-on-lenovo-s820. html
Maybe I need the Lenovo S820 original scatter file.
:crying:
Please help me
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios
pls help my lenovo s860 can't finish flash using sp flash tool
the reason my phone lenovo s860 got bricked is because I've installed too many xposed module, I rebooted it right after the installation and then it went boot loop
So I tried to format it using Recovery Rom but it went lag and it stuck there, so I pressed the volume up and down and the power button again to escape from lag but after the format The phone is stuck at the recovery mode even though I pressed reboot or power off.
Now I tried to Flash it using Sp flash tool (latest version) but I forgot to press the "format and download" instead I pressed the "download" right away with its stock Rom (also I forgot to press the checksum in the download options) and the installation continued but it did not went 100% but it is stucked at 25% or 24%
Now my phone just displays The lenovo logo with "Dl tool failed! " below
Pls help me (sa mga pro dyan)
I cant get it to fastboot
I've flashed custom recovery but it makes the screen all black when I turn it on
I also flashed it in sp flash tool the old version 3.13 something and still only 25%
PLS PLS PLS HELP ME
It's worth trying Lenovo's Smart Assistant. This is an official PC suite that looks like it can flash the latest stock rom onto your phone for you. You'll find it here: http://lenovomobilesupport.lenovo.com/gb/en/products/Phones/S-Series/S860-Smartphone/downloads/DS101291
I personally don't have a Lenovo phone but I've used Sony's PC software to fix similar problems to yours before now.
This will mean that your phone won't be rooted but at least it will work and you can then root it and reinstall what you need.
Let me know if this helps!
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device .