[STABLE][CWM][RECOVERY]Alcatel_OneTouch_Flash_6042D_BY_PIJUSH_SEN - Android General

Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:

THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....

Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:

Okkk
I am waiting for it...

connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.

Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...

thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?

pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....

Related

Qobile Noir A500 Wrongly Rooted and Wong CWM Recovery flashed.

I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Stock Recovery and Boot Files
xuphere said:
I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Click to expand...
Click to collapse
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files. http://forum.xda-developers.com/showthread.php?p=44351797
Regards.
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...elopers.com/showthread.php?t=2206421 :cowboy:
Click to expand...
Click to collapse
malick186 said:
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...ry.img after I am done with the scatter file.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xuphere said:
I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Click to expand...
Click to collapse
Bro ur best bet is that someone makes a cwm recovery soon or try to flash the stock recovery.img on ur a500... and if someone already has created a cwm recovery would anyone provide me a link to it
malick186 said:
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...it, cant get into recovery mode. Please help.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xedi95 said:
Bro ur best bet is that someone makes a cwm recovery soon or try to flash the stock recovery.img on ur a500... and if someone already has created a cwm recovery would anyone provide me a link to it
Click to expand...
Click to collapse
Bro tried flashing the Stock Recovery.img through Mobile uncle. but no luck. Still the screen gets black and then restarts and boots normally. the thing is now my Sim cards are not being detected.
xuphere said:
Bro tried flashing the Stock Recovery.img through Mobile uncle. but no luck. Still the screen gets black and then restarts and boots normally. the thing is now my Sim cards are not being detected.
Click to expand...
Click to collapse
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
malick186 said:
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
Click to expand...
Click to collapse
Great.. Good to know atleast someone is back in action. Would be great if you could guide me on Flashing the Boot and Stock Recovery. i checked my device status. My Boot Loader is UNKNOWN and Radio has no path.. probabaly that is the reason my Sim cards are not being detected and due to Boot i cant get in my recovery mode.
xuphere said:
Great.. Good to know atleast someone is back in action. Would be great if you could guide me on Flashing the Boot and Stock Recovery. i checked my device status. My Boot Loader is UNKNOWN and Radio has no path.. probabaly that is the reason my Sim cards are not being detected and due to Boot i cant get in my recovery mode.
Click to expand...
Click to collapse
Since i got the backup so i finally decided to mess up with the recovery. Just flashed Noir A20 Recovery on A500 using mobile uncle tool and BANG it doesn't work. All what I am getting is white screen while entering the recovery mode. I tried reverting back to stock recovery.img using Mobile Uncle tools but no vain. Just going to try it twice than will flash it using SP flash tool if it fails! Stay tuned! :highfive:
---------- Post added at 12:00 PM ---------- Previous post was at 11:39 AM ----------
Dude Finally I flashed the stock recovery.img using the sp flash tool. it has become as your. I lost my stock recovery also and Unable to get back, i flashed it usning the Mobile Uncle tools but no vain.... :crying: :crying: :crying:
But still able to boot up normally and both sim working properly!
I think we had to work on our stock recovery.img or we are flashing it in wrong manner. Or there may be a chance I extracted it in wrong way. Searching the XDA Forum for possible answers and waiting for a more senior member to help us in this case!
malick186 said:
Since i got the backup so i finally decided to mess up with the recovery. Just flashed Noir A20 Recovery on A500 using mobile uncle tool and BANG it doesn't work. All what I am getting is white screen while entering the recovery mode. I tried reverting back to stock recovery.img using Mobile Uncle tools but no vain. Just going to try it twice than will flash it using SP flash tool if it fails! Stay tuned! :highfive:
---------- Post added at 12:00 PM ---------- Previous post was at 11:39 AM ----------
Dude Finally I flashed the stock recovery.img using the sp flash tool. it has become as your. I lost my stock recovery also and Unable to get back, i flashed it usning the Mobile Uncle tools but no vain.... :crying: :crying: :crying:
But still able to boot up normally and both sim working properly!
I think we had to work on our stock recovery.img or we are flashing it in wrong manner. Or there may be a chance I extracted it in wrong way. Searching the XDA Forum for possible answers and waiting for a more senior member to help us in this case!
Click to expand...
Click to collapse
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
xuphere said:
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
Click to expand...
Click to collapse
Also downloaded and app called Nandroid Manager to flash my backup, but its doesnt detect any backup file in my device. I have copied the backup ile in both the Internal and the Ext memory, but still no luck.
xuphere said:
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
Click to expand...
Click to collapse
Beware your warranty will be void! last time i mistakenly flashed the Wrong stock ROM on my Noir A5 using the SP flash tool due to which i bricked my device and I was having no option rather than going to service center where they scoldED me and said " WHO HAS GIVEN YOU THE PERMISSION TO MESS UP WITH THE STOCK FIRMWARE OF QMOBILE???" And i replied "DUDE PLZ FIX IT I WON'T DO IT AGAIN"
and they fix it for free but put a huge stamp on my digicom warranty card written WARRANTY VOID :crying:
---------- Post added at 11:53 PM ---------- Previous post was at 11:50 PM ----------
xuphere said:
Also downloaded and app called Nandroid Manager to flash my backup, but its doesnt detect any backup file in my device. I have copied the backup ile in both the Internal and the Ext memory, but still no luck.
Click to expand...
Click to collapse
Havent used such kinda app. The only best thing to create the nandroid backup is by using a CWM/TWRP recovery bcoz it is easy to restore also and helps you unbricked your device if you are soft bricked! :fingers-crossed:
CWM For Qmobile Noir A500
Refer to this thread to fix your problem
http://forum.xda-developers.com/showpost.php?p=44719407&postcount=5
qmobile a500 fix
qmobile is a model of gionee ctrl v4 you can try its rooting and cwm recovery mode it will work okay
Same problem i am facing right now
malick186 said:
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
Click to expand...
Click to collapse
finaly jst bricked my phone ... noir a500
had root but no custom recovery
now stuck on boot logo when ever it starts, else 3e system recovery can b operate able but unfortunately can't b useble ...
i have stock update.zip but installation aborted when try to update from sd card ...
wipe cache / data / factory reset all useless in system recovery ...
i dun have any sort of back up nor nandroid 1's ..
tried to use sp flash tool but then i found m missing aloot of files ..
can u guide me through this ..
how to get stock firmware through system recovery ?
or from where i can complete my files for sp flash tools n how it can detect mobile ?
can a500 b updated by ota update talking about adb sideload ?
please your help will b really appriciable
3rddesie said:
finaly jst bricked my phone ... noir a500
had root but no custom recovery
now stuck on boot logo when ever it starts, else 3e system recovery can b operate able but unfortunately can't b useble ...
i have stock update.zip but installation aborted when try to update from sd card ...
wipe cache / data / factory reset all useless in system recovery ...
i dun have any sort of back up nor nandroid 1's ..
tried to use sp flash tool but then i found m missing aloot of files ..
can u guide me through this ..
how to get stock firmware through system recovery ?
or from where i can complete my files for sp flash tools n how it can detect mobile ?
can a500 b updated by ota update talking about adb sideload ?
please your help will b really appriciable
Click to expand...
Click to collapse
Unfortunately there is no full backup of our Qmobile Noir A500 through MTK Droid Tool. But xda user hamsam has uploaded his nandroid backup which would of great use for you.
1) Download this nandroid backup by hamsam, from this thread: http://forum.xda-developers.com/showthread.php?t=2444089
2) Place the downloaded files in SD card. {Note: Place them in correct folder otherwise CWM wont detect it}
3) Get CWM recovery for A500 and flash it through SP flash tool.
3) Boot into recovery and restore the backup you dowloaded.
4) Reboot. :victory:
Now if you want you can backup your ROM through MTK Droid Tools for the safe side or always kept the nandroid backup in your SDcard and PC aswell.
unbricked but lost imei+network both sim
malick186 said:
Unfortunately there is no full backup of our Qmobile Noir A500 through MTK Droid Tool. But xda user hamsam has uploaded his nandroid backup which would of great use for you.
1) Download this nandroid backup by hamsam, from this thread: http://forum.xda-developers.com/showthread.php?t=2444089
2) Place the downloaded files in SD card. {Note: Place them in correct folder otherwise CWM wont detect it}
3) Get CWM recovery for A500 and flash it through SP flash tool.
3) Boot into recovery and restore the backup you dowloaded.
4) Reboot. :victory:
Now if you want you can backup your ROM through MTK Droid Tools for the safe side or always kept the nandroid backup in your SDcard and PC aswell.
Click to expand...
Click to collapse
sp tool helped me work it out jst unbricked noir a500 ..
flashed the cwm recovery img file of a500 through sp flash tool
it worked n i got cwm working recovery in a500 yet not booted normaly ..
then placed the update.zip n it goes well ..
back on stock version with root access ..
now the problem is i lost imei of both network .
i tried to restore stock nandroid but md5 mis match also made own checksum md5 but no luck ..
now stuck on lost imei ..
help needed .... ???
3rddesie said:
sp tool helped me work it out jst unbricked noir a500 ..
flashed the cwm recovery img file of a500 through sp flash tool
it worked n i got cwm working recovery in a500 yet not booted normaly ..
then placed the update.zip n it goes well ..
back on stock version with root access ..
now the problem is i lost imei of both network .
i tried to restore stock nandroid but md5 mis match also made own checksum md5 but no luck ..
now stuck on lost imei ..
help needed .... ???
Click to expand...
Click to collapse
Consider the following options:
1) Try to flash stock boot.img through SP flash tool.
2) If still problem remains then try to write original IMEI using MTK Droid Tool
I never used these method but i think it should work for you. :angel:
From where else i can get other files of a500 like ebr1, uboot, preloader etc
malick186 said:
Consider the following options:
1) Try to flash stock boot.img through SP flash tool.
2) If still problem remains then try to write original IMEI using MTK Droid Tool
I never used these method but i think it should work for you. :angel:
Click to expand...
Click to collapse
From where else i can get other files of a500 like ebr1, mbr, uboot, preloader etc

THL T100S Booting to Black screen

Hey Guys
So I got the newest THL T100 Kitkat rom on needroms did the factory reset / format now I boot to a black screen. I cant even get into the Chinese recovery menu.
Trying to use SP Flash Tools V5.1343.01 with the rom from Needroms and a scatter file I got on XDA but flash tools does not do anything when I click Download.
Im thinking this is down to the drivers the Phone keeps installing as a HTC Dream.
I did have 2 questions
do I not link SP Flash to the Rom I want installed ?
Were can I find a download of Windows 8 THL T100 drivers ? (I think this is the reason)
I have checked many guides but the version of SP they use is way different but I seen this version being recommended.
Please help miss my phone !!
Ok I got the phone booting so that SP Tools can download to it.
Now My question is how can I install a recovery (CWM & TWRP) using SP tool ?
I extracted the CWM software and used the image I.e in SP Tools I had everything deselected bar Recovery and I linked the locationg to the CWM IMG, It booted to CWM but couldnt load it and kept restarting

[Completed] BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0) SP Flash Tool mtk6572

Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device and prepared with mtk droid tools for flash tool.
Hi,
Thanks for using XDA assist.
Please read this guide if you haven't already:
[TUT]MTK Android (Sp flash tool ) tutorial
If the guide doesn't help, please create a XDA account and ask your question in the link directly above as well.
Good Luck! - gsstudios

[RECOVERY] [PHILZ] Infinix Zero 4 X555

Hi there!
Because lack of the development at this device. I try to make a little work for this infamous device.
This is a custom recovery for Infinix Zero 4 based on PhilZ Touch Recovery version 6.59.0. You can use this recovery to flash custom ROMs, root using Magisk or SuperSU and other flashable ZIPs.
[Really] Important - read before flashing
I am not responsible for anything that goes wrong. You are agreed to flash this recovery that will break XOS OTA update, lose warranty and may break your device.
However, I've included stock recovery if you change your mind and want to back to original one.
Instructions:
1. Go to Settings, About Phone, and then tap Software version 10 times. It should now say that you are a developer.
2. Go to Settings, Developer Options. Turn on USB Debugging and Enable OEM Unlock.
3. Install MTK Preloader USB driver, skip if you've already installed this one.
4. Extract PhilZ recovery zip file, and extract
5. Turn off your device.
6. Open SP Flash Tools, locate scatter file to your downloaded zip recovery.
7. Click download, and press VOL DOWN on your device.
8. Turn on your device, press POWER and VOL UP.
9. Your custom recovery has been installed.
Back To Stock
If you decided change your mind by restore stock recovery for reasons such as want to keep your warranty, continue receive OTA update and maybe want to be back on the track, I've also provided stock recovery both Nougat and Marshmallow version.
Download links
PhilZ Touch Recovery
SP Flash Tools
MTK Preloader USB Driver
Stock Recovery (Marshmallow version)
Stock Recovery (Nougat version)
Credit and Thanks
Credit to @Phil3759 for awesome custom recovery
Thanks to Infinix, Mediatek, and you
Reserved
Reserved
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
dayat7man said:
After i install PhilZ and SU doesnt want to booting, just stuck in logo Infinix
Could you please to tell me whats wrong??
Send me email please
[email protected]
Click to expand...
Click to collapse
because the boot isn't patched. you can use Magisk to patch your boot.img and flash it again and it will work.
you can get your boot.img either from your stock ROM where is available at infinixmobility.com or you can use miracle box to extract it from your current installed ROM

Soft bricked phone MT6572 kitkat 4.4.2

Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
cybrax said:
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
Click to expand...
Click to collapse
Hey I got one of them x27 plus wish phone....mtk6572 4.4.2 kitkat .....for true info on device install "device info hw" green icon and activity launcher .....check out the info it gives compared to info from ph settings menu.....but my question did you find way to root of flash a generic android rom?
I used kingroot with laptop.

Categories

Resources