I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Stock Recovery and Boot Files
xuphere said:
I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Click to expand...
Click to collapse
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files. http://forum.xda-developers.com/showthread.php?p=44351797
Regards.
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...elopers.com/showthread.php?t=2206421 :cowboy:
Click to expand...
Click to collapse
malick186 said:
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...ry.img after I am done with the scatter file.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xuphere said:
I recently bought a Qmobile A500 Noir, but wanted to flash it with a Custom ROM. Not paying much attention to the model of my cell phone I by mistake rooted it with Noir A900 procedure as defined in one of the posts, instead of A500 and also tried flashing CWM recovery. Identifying that I have used the wrong procedure of a different model, I instantly searched for A500 and got the procedure in of the the posts. Now the issue is that when I try to go in Recovery Mode, my cell phone screen goes complete White, and after a min it auto restarts and boots normally. I am hating the fact that I cant go back in the Recovery Mode, nor in Stock Recovery because I suppose I have replaced it with a CWM Recovery of a wrong version . I want to reset and get back to Stock Recovery so that I can reset my phone and bring it back to its original state as I have found that there is no CWM Recovery or a Custom ROM present for A500 Noir currently. If anybody could please help me in this regard as I am clueless.
Click to expand...
Click to collapse
Bro ur best bet is that someone makes a cwm recovery soon or try to flash the stock recovery.img on ur a500... and if someone already has created a cwm recovery would anyone provide me a link to it
malick186 said:
xuphere said:
As posted by by one the member, whom i am highly obliged and grateful to, the Stock Recovery.img and Boot.img have been exteacted and posted in one of the post. Now how to Flash them using SP Flash tools is what I need the guidelines for. I do have the Scatter Recovery file, but I guess VCOM driver files, and Info files for Stock recovery are not present. If anyone who could please shed some light on it, would save me from trashing my phone. Providing the link for Stock Recovery and Boot files.
Here is the link of drivers you ne...it, cant get into recovery mode. Please help.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
xedi95 said:
Bro ur best bet is that someone makes a cwm recovery soon or try to flash the stock recovery.img on ur a500... and if someone already has created a cwm recovery would anyone provide me a link to it
Click to expand...
Click to collapse
Bro tried flashing the Stock Recovery.img through Mobile uncle. but no luck. Still the screen gets black and then restarts and boots normally. the thing is now my Sim cards are not being detected.
xuphere said:
Bro tried flashing the Stock Recovery.img through Mobile uncle. but no luck. Still the screen gets black and then restarts and boots normally. the thing is now my Sim cards are not being detected.
Click to expand...
Click to collapse
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
malick186 said:
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
Click to expand...
Click to collapse
Great.. Good to know atleast someone is back in action. Would be great if you could guide me on Flashing the Boot and Stock Recovery. i checked my device status. My Boot Loader is UNKNOWN and Radio has no path.. probabaly that is the reason my Sim cards are not being detected and due to Boot i cant get in my recovery mode.
xuphere said:
Great.. Good to know atleast someone is back in action. Would be great if you could guide me on Flashing the Boot and Stock Recovery. i checked my device status. My Boot Loader is UNKNOWN and Radio has no path.. probabaly that is the reason my Sim cards are not being detected and due to Boot i cant get in my recovery mode.
Click to expand...
Click to collapse
Since i got the backup so i finally decided to mess up with the recovery. Just flashed Noir A20 Recovery on A500 using mobile uncle tool and BANG it doesn't work. All what I am getting is white screen while entering the recovery mode. I tried reverting back to stock recovery.img using Mobile Uncle tools but no vain. Just going to try it twice than will flash it using SP flash tool if it fails! Stay tuned! :highfive:
---------- Post added at 12:00 PM ---------- Previous post was at 11:39 AM ----------
Dude Finally I flashed the stock recovery.img using the sp flash tool. it has become as your. I lost my stock recovery also and Unable to get back, i flashed it usning the Mobile Uncle tools but no vain.... :crying: :crying: :crying:
But still able to boot up normally and both sim working properly!
I think we had to work on our stock recovery.img or we are flashing it in wrong manner. Or there may be a chance I extracted it in wrong way. Searching the XDA Forum for possible answers and waiting for a more senior member to help us in this case!
malick186 said:
Since i got the backup so i finally decided to mess up with the recovery. Just flashed Noir A20 Recovery on A500 using mobile uncle tool and BANG it doesn't work. All what I am getting is white screen while entering the recovery mode. I tried reverting back to stock recovery.img using Mobile Uncle tools but no vain. Just going to try it twice than will flash it using SP flash tool if it fails! Stay tuned! :highfive:
---------- Post added at 12:00 PM ---------- Previous post was at 11:39 AM ----------
Dude Finally I flashed the stock recovery.img using the sp flash tool. it has become as your. I lost my stock recovery also and Unable to get back, i flashed it usning the Mobile Uncle tools but no vain.... :crying: :crying: :crying:
But still able to boot up normally and both sim working properly!
I think we had to work on our stock recovery.img or we are flashing it in wrong manner. Or there may be a chance I extracted it in wrong way. Searching the XDA Forum for possible answers and waiting for a more senior member to help us in this case!
Click to expand...
Click to collapse
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
xuphere said:
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
Click to expand...
Click to collapse
Also downloaded and app called Nandroid Manager to flash my backup, but its doesnt detect any backup file in my device. I have copied the backup ile in both the Internal and the Ext memory, but still no luck.
xuphere said:
Malik Sb, I am sorry to hear about you loosing the Stock Recovery. I also took the backup, just in case... but now I am stuck at exactly the same condition where you are. Additionally i tried flashing G520 Huwawaii recovery.img, which took away my Sim card Detection too. Now the screen has gone blank. After alot of research and deleting files from the device Internal memory and SD card, I downloaded an app called Discovery something, its a turkish app. It downloaded the Original Recovery for me, I then flashed it using MobileUncle and now i am back to the White Recovery screen, which automatically restarts and boots my phone, but I still done have any luck with my Sim cards. going to Qmobile Service Centre to try luck.
Click to expand...
Click to collapse
Beware your warranty will be void! last time i mistakenly flashed the Wrong stock ROM on my Noir A5 using the SP flash tool due to which i bricked my device and I was having no option rather than going to service center where they scoldED me and said " WHO HAS GIVEN YOU THE PERMISSION TO MESS UP WITH THE STOCK FIRMWARE OF QMOBILE???" And i replied "DUDE PLZ FIX IT I WON'T DO IT AGAIN"
and they fix it for free but put a huge stamp on my digicom warranty card written WARRANTY VOID :crying:
---------- Post added at 11:53 PM ---------- Previous post was at 11:50 PM ----------
xuphere said:
Also downloaded and app called Nandroid Manager to flash my backup, but its doesnt detect any backup file in my device. I have copied the backup ile in both the Internal and the Ext memory, but still no luck.
Click to expand...
Click to collapse
Havent used such kinda app. The only best thing to create the nandroid backup is by using a CWM/TWRP recovery bcoz it is easy to restore also and helps you unbricked your device if you are soft bricked! :fingers-crossed:
CWM For Qmobile Noir A500
Refer to this thread to fix your problem
http://forum.xda-developers.com/showpost.php?p=44719407&postcount=5
qmobile a500 fix
qmobile is a model of gionee ctrl v4 you can try its rooting and cwm recovery mode it will work okay
Same problem i am facing right now
malick186 said:
dude remember i told you about my wifi not working after creating the backup of my a500, I decided to flash the stock boot.img with recovery.img also using the flash tool, and now its working fine.
The purpose of mine mentioning this is that those files really worked for me.
In my opinion your problem should be easily solved by flashing the stock recovery.img bcoz u messed with this only by flashing anothers mobile recovery. :victory:
I just wish i can upload the whole backup of my A500 for you so you can get back ROM in working condition but I can't bcoz I have a slow internet speed. :crying:
Click to expand...
Click to collapse
finaly jst bricked my phone ... noir a500
had root but no custom recovery
now stuck on boot logo when ever it starts, else 3e system recovery can b operate able but unfortunately can't b useble ...
i have stock update.zip but installation aborted when try to update from sd card ...
wipe cache / data / factory reset all useless in system recovery ...
i dun have any sort of back up nor nandroid 1's ..
tried to use sp flash tool but then i found m missing aloot of files ..
can u guide me through this ..
how to get stock firmware through system recovery ?
or from where i can complete my files for sp flash tools n how it can detect mobile ?
can a500 b updated by ota update talking about adb sideload ?
please your help will b really appriciable
3rddesie said:
finaly jst bricked my phone ... noir a500
had root but no custom recovery
now stuck on boot logo when ever it starts, else 3e system recovery can b operate able but unfortunately can't b useble ...
i have stock update.zip but installation aborted when try to update from sd card ...
wipe cache / data / factory reset all useless in system recovery ...
i dun have any sort of back up nor nandroid 1's ..
tried to use sp flash tool but then i found m missing aloot of files ..
can u guide me through this ..
how to get stock firmware through system recovery ?
or from where i can complete my files for sp flash tools n how it can detect mobile ?
can a500 b updated by ota update talking about adb sideload ?
please your help will b really appriciable
Click to expand...
Click to collapse
Unfortunately there is no full backup of our Qmobile Noir A500 through MTK Droid Tool. But xda user hamsam has uploaded his nandroid backup which would of great use for you.
1) Download this nandroid backup by hamsam, from this thread: http://forum.xda-developers.com/showthread.php?t=2444089
2) Place the downloaded files in SD card. {Note: Place them in correct folder otherwise CWM wont detect it}
3) Get CWM recovery for A500 and flash it through SP flash tool.
3) Boot into recovery and restore the backup you dowloaded.
4) Reboot. :victory:
Now if you want you can backup your ROM through MTK Droid Tools for the safe side or always kept the nandroid backup in your SDcard and PC aswell.
unbricked but lost imei+network both sim
malick186 said:
Unfortunately there is no full backup of our Qmobile Noir A500 through MTK Droid Tool. But xda user hamsam has uploaded his nandroid backup which would of great use for you.
1) Download this nandroid backup by hamsam, from this thread: http://forum.xda-developers.com/showthread.php?t=2444089
2) Place the downloaded files in SD card. {Note: Place them in correct folder otherwise CWM wont detect it}
3) Get CWM recovery for A500 and flash it through SP flash tool.
3) Boot into recovery and restore the backup you dowloaded.
4) Reboot. :victory:
Now if you want you can backup your ROM through MTK Droid Tools for the safe side or always kept the nandroid backup in your SDcard and PC aswell.
Click to expand...
Click to collapse
sp tool helped me work it out jst unbricked noir a500 ..
flashed the cwm recovery img file of a500 through sp flash tool
it worked n i got cwm working recovery in a500 yet not booted normaly ..
then placed the update.zip n it goes well ..
back on stock version with root access ..
now the problem is i lost imei of both network .
i tried to restore stock nandroid but md5 mis match also made own checksum md5 but no luck ..
now stuck on lost imei ..
help needed .... ???
3rddesie said:
sp tool helped me work it out jst unbricked noir a500 ..
flashed the cwm recovery img file of a500 through sp flash tool
it worked n i got cwm working recovery in a500 yet not booted normaly ..
then placed the update.zip n it goes well ..
back on stock version with root access ..
now the problem is i lost imei of both network .
i tried to restore stock nandroid but md5 mis match also made own checksum md5 but no luck ..
now stuck on lost imei ..
help needed .... ???
Click to expand...
Click to collapse
Consider the following options:
1) Try to flash stock boot.img through SP flash tool.
2) If still problem remains then try to write original IMEI using MTK Droid Tool
I never used these method but i think it should work for you. :angel:
From where else i can get other files of a500 like ebr1, uboot, preloader etc
malick186 said:
Consider the following options:
1) Try to flash stock boot.img through SP flash tool.
2) If still problem remains then try to write original IMEI using MTK Droid Tool
I never used these method but i think it should work for you. :angel:
Click to expand...
Click to collapse
From where else i can get other files of a500 like ebr1, mbr, uboot, preloader etc
Related
Xperia Rom
Pakistan Baseband
Note: do backup before flash.......
1.Place it in sd card
2.wipe data reset
3.flash rom
4.flash pakistan baseband zip
5. enjoy..........
Camera Autofocus Fix
-Download libcameracustom.zip from attachements
-extract it and copy to system/lib/[here]
-flash modified rom
No bugs so far.......
Credits also goes to incpak as i have just ported it they made it....
Don't forget to click thanks button
Post a link to the original site from where you got this. Secondly add more information about the ROM you have not described the ROM in any way. Also post screenshots of it.
Regards,
RaHBeR
i have ported this from incpak noir a20 rom....
For more info and screenshots go to this site
http://www.incpak.com/tech/xperia-rom-qmobile-noir-a500/
hamsam said:
i have ported this from incpak noir a20 rom....
For more info and screenshots go to this site
http://www.incpak.com/tech/xperia-rom-qmobile-noir-a500/
Click to expand...
Click to collapse
You have ported this? That is you have changed this ROM?
Then give details of all the changes in this ROM that you made and also the differences between this ROM and the Stock ROM.
These all data along with screenshots should be in your first post.
Regards,
RaHBeR
Screen shot added..............
camera resolution problem...
Oops ,, deleted
xedi95 said:
Oops ,, deleted
Click to expand...
Click to collapse
???
Nice Work!
The file size is tooo big! +400MB well anyways i will definitely try it and share my views regarding this ROM!
more details should be added regarding the ROM! :angel:
Works on Walton Primo G3??
esarve said:
Works on Walton Primo G3??
Click to expand...
Click to collapse
it will work just replace boot.img with stock one as this user did on this page post 1
http://forum.xda-developers.com/showthread.php?t=2475234&page=2
hamsam said:
it will work just replace boot.img with stock one as this user did on this page post 1
http://forum.xda-developers.com/showthread.php?t=2475234&page=2
Click to expand...
Click to collapse
YEah i tried yesterday it worked
I flashed this rom today, but badly stuck. help
hamsam said:
Xperia Rom
Pakistan Baseband
Note: do backup before flash.......
1.Place it in sd card
2.wipe data reset
3.flash rom
4.flash pakistan baseband zip
5. enjoy..........
Camera Autofocus Fix
-Download libcameracustom.zip from attachements
-extract it and copy to system/lib/[here]
-flash modified rom
No bugs so far.......
Credits also goes to incpak as i have just ported it they made it....
Don't forget to click thanks button
Click to expand...
Click to collapse
I flashed this rom on qmobile a500 of my friend, flashed successfully, rebooted without letting me do three wipes of cache dalvik and factory. Mobile rebooted but fc on intial boot setup and I can not get past to it, thid is not it, but the worst of all is that I can not boot into cwm
Recovery to flash any other rom... initial setup app doesnot close by any means.. I can pull now notification bar, have to settings..
Please help... please help. Guide my another rom or help me boot into recovery.. one more thing does qmobile a500 support twrp recovery... becaise I manage to install flashify app from play store somehow... this app let's me flash rom by using twrp recovery... waiting for some ecpertly reply very badly.....
affineer said:
I flashed this rom on qmobile a500 of my friend, flashed successfully, rebooted without letting me do three wipes of cache dalvik and factory. Mobile rebooted but fc on intial boot setup and I can not get past to it, thid is not it, but the worst of all is that I can not boot into cwm
Recovery to flash any other rom... initial setup app doesnot close by any means.. I can pull now notification bar, have to settings..
Please help... please help. Guide my another rom or help me boot into recovery.. one more thing does qmobile a500 support twrp recovery... becaise I manage to install flashify app from play store somehow... this app let's me flash rom by using twrp recovery... waiting for some ecpertly reply very badly.....
Click to expand...
Click to collapse
Install mobile uncle tool and download cwm recovery from incpak.com for a500..place recovery on root of sd card and flash it through mobile uncle tools....
Sent from my A500 using Tapatalk
tried but device could not to recovery
hamsam said:
Install mobile uncle tool and download cwm recovery from incpak.com for a500..place recovery on root of sd card and flash it through mobile uncle tools....
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
installled mobile uncle and flashed said recovery from incpak, after installing recovery mobile uncle prompted me to reboot, i chose yes. but failed to boot into recovery, then it mobile booted normally..
so i tried to install stock a500 recovery... it is stuck at bootloop... only q mobile boot animation not normal boot, no recovery....
i tried to install bootimg using sp flash tool but gave error 8032... i have installed vcom usb drivers correctly......... please help
sp flash working now..
affineer said:
installled mobile uncle and flashed said recovery from incpak, after installing recovery mobile uncle prompted me to reboot, i chose yes. but failed to boot into recovery, then it mobile booted normally..
so i tried to install stock a500 recovery... it is stuck at bootloop... only q mobile boot animation not normal boot, no recovery....
i tried to install bootimg using sp flash tool but gave error 8032... i have installed vcom usb drivers correctly......... please help
Click to expand...
Click to collapse
recovery flashed but not booting to recovery nor normally... qmobile official logo all time long................ help.
maybe recovery is bad, can you provide working recovery img file. thanks
affineer said:
recovery flashed but not booting to recovery nor normally... qmobile official logo all time long................ help.
maybe recovery is bad, can you provide working recovery img file. thanks
Click to expand...
Click to collapse
If Rom not booting also did recovery then read this post
http://www.incpak.net/showthread.php?p=556
Sent from my A500 using Tapatalk
perfomed format whole flash, now black screen
hamsam said:
If Rom not booting also did recovery then read this post
http://www.incpak.net/showthread.php?p=556
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
after performing format whole flash, i flashed bootimg and recovery supplied in a,zip.. nothing on screen now. sp flash reported success in flashing recovery and bootimg..
what else?
please help and skype
affineer said:
after performing format whole flash, i flashed bootimg and recovery supplied in a,zip.. nothing on screen now. sp flash reported success in flashing recovery and bootimg..
what else?
Click to expand...
Click to collapse
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
affineer said:
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
Click to expand...
Click to collapse
if you have formated whole flash u need to flash every thing provided in zip including preloader....Your device will boot i have tried this procedure many time and successfully booted device every time.Also one more thing choose this as scatter file "MT6589_Android_scatter_emmc_PMT.txt" and don't forget to choose and tick nvram or any other thing provided in zip...
affineer said:
i could not succeed flashing recovery via sp flash... every time i follow guide which you provided link for, i end up as if recovery does not get flashed. i also performed whole flash... it cleared everything on friend's a500 qmobile. then i flash recovery image, it gets stuck on qmobile logo...... i have repeated this for so many times... i m sure recovery does nt get flashed, sp flash tool may green sign of success
but no success in reality..
can you please skype with me
my skype name affineer.911
Real name Ashfaq Khatti
Click to expand...
Click to collapse
f you have formated whole flash u need to flash every thing provided in zip including preloader....Your device will boot i have tried this procedure many time and successfully booted device every time.Also one more thing choose this as scatter file "MT6589_Android_scatter_emmc_PMT.txt" and don't forget to choose and tick nvram or any other thing provided in zip...
Hi guys! i'm newbie to this site i hope you could help me.. my spreadtrum android phone is in a bootloop status right now and when i was gonna restore my backup in cwm it was complete but the problem is my phone did not boot always stock in boot logo which appears and vibrate twice then stucked on it.
Can anyone help me!! plss
luiscole992 said:
Hi guys! i'm newbie to this site i hope you could help me.. my spreadtrum android phone is in a bootloop status right now and when i was gonna restore my backup in cwm it was complete but the problem is my phone did not boot always stock in boot.img which appears and vibrate twice then stucked on it.
Can anyone help me!! plss
Click to expand...
Click to collapse
You mean to say thay your device boots and only logo is shown??
You take boot.img from your CWM backup and flash it using some tools which are available for your device, maybe ODIN or SP tool (if your device is mediatek).
Elce you can try flashing some CUSTOM Kernels available for you..
droid-devz said:
You mean to say thay your device boots and only logo is shown??
You take boot.img from your CWM backup and flash it using some tools which are available for your device, maybe ODIN or SP tool (if your device is mediatek).
Elce you can try flashing some CUSTOM Kernels available for you..
Click to expand...
Click to collapse
yes. only logo is shown.
HI FRIEND AM AGAIN HERE WITH NEW UNBRICKING TUTORIAL FOR MICROMAX A35 AND OTHER Spreadtrum DEVICES
REQUIREMENTS :
1.cwm backup
2.cwm
3.boot.img
4.pc
5.mob which is stuck at boot logo and cant be flashed by research download or other tool
6.a rom {if backup doesnt work }
for those who are having stuck at boot logo problem ,
follow these steps
1.flash recovery to boot partiton
Code:
fastboot flash boot recovery.img
2.then press power key you ll boot in cwm
3.now wipe data and dalvik cache
4.place the backup in clockworkmod/backup/(your backup here)
5.now do restore backup .please do advance restore, restore system.img only
6.flash the boot.img to boot again
Code:
fastboot flash boot boot.img
link for backup
http://www.mediafire.com/download/86qssa1vs10doag/jelly+blend+cwm+backup+by+gopinaidu.zip
LINK FOR BOOT.IMG :
https://docs.google.com/file/d/0B8ks3Q1UXCFjZzJITS1MUHczM28/edit
credits
AKASH UJJAINKAR
PLEASE PRESS THANKS BUTTON
Not Working!
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
ijaz_shariff said:
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
Click to expand...
Click to collapse
many users tested it and it worked fine maybe u didnt follow correctly
Thanku so much its really works thnks man !!!
Problems in newly installed rom in micromax a35
I successfully flashed the stock rom in my bricked micromax a35 using the spreadtrum research download tool.
But there are a few problems I m getting. Please help.
1. Bluetooth is able to pair with other devices, but when I try to send or receive files using bluetooth, it doesn't accept.
2. IMEI number is changed for both sims. Will this create any problem?
3. When I try to call or somebody calls me, the dialer crashes and both sims shows no network.
4. Internet is not working.
Plz friends if there is any solution to this problem.
I had downloaded the stock rom files from xdadevelopers.
micromax a35 vibrate problem when switch on the phone
Hi,
My self pratik, i get some problem in my micromax a35.
that is when i try to switch it on it just continuously vibrates, no display on screen nothing just vibration
kindly provide me some solution
thanks
hey same problem here also pls reply any solution for this
mmx a35 stuck at logo
i was trying to install a custom rom but i cliked backup instead recovery it was taking much time so i removed battery now it is stuck at bolt logo . i have tried above method but when reboot again it stuck at bolt logo
Hey there,
I have a Micromax AQ4501, during flashing Custom ROM I think I made some mistake or selected improper ROM so my phone is not getting ON, it just shows the logo and that's it.
No recovery menu or any other option is available now, only fastboot mode is working...
Can u help me to solve this issue and recover my phone...?
Sent from my D2502 using XDA Free mobile app
mmx a35 stuck
While taking backup i removed the battery because it was taking time.....the sim cards were not detected,i thought factory reset would work but my phone is just vibrating again and again and not startingplease help me guys!!!
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
Installing Clockworkmod Recovery on your Alcatel Onetouch Flash 6042D means that you will be able to flash new custom ROMs on it. Without custom recovery you cannot flash new ROMs. Also, it should be installed on rooted devices. Clockworkmod Recovery can also be used to backup your entire ROM.
WARNING: Installing a recovery may brick your phone...Don't Blame Me.. Do at your Own Risk...
Note:- Alcatel OneTouch Flash Recovery Uses a secured boot.img,so a custom recovery will cause boot loop..Please Download and Flash The unsecured boot.img from below link. And flash it with recovery..
You need:
1. A Windows PC
2. CWM recovery (Download)
3. Unsecured Boot.img (Download)
4. SP Flash tools (Download)
5. Driver (Download)
6. Scatter file (Download)
7.Alcatel Onetouch Flash 6042D
Follow these steps to flash custom recovery using sp flash tools:
Step 1: Extract/unzip all downloaded files.
Step 2: Open SP flash tool and load scatter file.
Step 3: Unselect all blocks and select only RECOVERY and BOOT.
Step 4: Click the location column of RECOVERY and BOOT and select downloaded
recovery and boot.
Step 5: Press and Volume Down + Power to Enter in CWM Recovery Mode.
If you face any problem contact me at facebook.....:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Biman94 said:
THANK YOU VERY MUCH...
I have tried all the recovery on the net but they all get boot loop..
And they can't format data and factory reset...
Now it a humble request to port rom for this devices....
Click to expand...
Click to collapse
Thanks for your review...
i am currently working on AICP ROM 5.1.1..
I will upload it within 2 days...
Be Tuned....:highfive: :highfive: :highfive:
Okkk
I am waiting for it...
connecting in sp flash & mtk droid tools.
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Solution of your problem....
pinakini said:
hai there
I have a peculiar problem here. I am not a programmer or some thing like that. But an avid fan of android.
I am not able to get my rooted 6042d detected in SP FT & MTK droid tools to take a back up. My system is Win.XP [SP3]. I even formatted the system twice to remove left overs. Even, I am clue less how to get it done. I installed the drivers provided by you. I think my ignorance of windows is the main hurdle here. Can you please guide me - how to? Sorry for the bother.
I wish to flash the secure CWM made by you and the LP style rom followed by it.
1. spft says 'the application failed to start because the application configuration is incorrect....reinstall..'
2.mtk droid tools says 'the device is not revealed.. connect or reconnect...' - on the right side -' in system already available android debug bridge 1.0.26'
thanks
PS: I know how to use both the tools, I did it with my previous device, also of MTK-zte.
Click to expand...
Click to collapse
I recomend u to go to this link to solve your Spft problem...
and i think u must download your stock rom instead of making backup...
after this problem solved try to flash unsecured boot.img first..
then u can try flashing My CWM recovery or Philz Recovery
(philz recovery can be found here...)
and got to this link
you can understand what is your problem connecting in mtk driod tool...
I think u must flash it.. because its the problem of your phone...
and if u face any problem contact me or for instant help just take the help of Google BABA!!!...
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
pinakini said:
thanks for the swift reply.
SPFT problem solved as you suggested. But the problem with DT persists.
I do not have the stock rom of onetouch flash 6042d. [ my device is wrongly showing idol3!]
I want to have a SPFT back up in Droid Tools to be on safe side with imie etc. [being able to run Droid tools.]
I highly appreciate what ever the hints/advice I need in this regard, if extended.
When your LP themed rom for our device will be out?
Click to expand...
Click to collapse
Here Check This Website......
After that I hope U can Understand your problem.....
Then Uninstall any previous driver installed of your phone on your pc....
then install the driver mention above....
and after that if the problem remains try to download and install proper adb driver by this....