Related
after flashing my galaxy sl i9003 using xxkph it is done smoothly but after restart my mobile it doesn't start normaly it is restarting aain and again and recovery mode doesn't appear how to fix this issue
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
hi brother
i didnt take any backup i am a biginer that do so..
the reason is my first fw is froyo i just updated to xwkpg(2.3.5) via kies and again flashed with odin ie gb ver xxkpq (2.3.6) then try to instal cf root but it is not suite for my fw after restarting nothing appear on my phone ten somebody give me a post to do wit xxkph i try this via odil 3 to 5 times it comes boot screen and do not enter ome screen then someone post me to do with xxkb3 this fw is prograssing download what i do to come my ome screen pls help me bro
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
pls brother kindly give me a solution
Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
wiping data/factory reset it shows e:format_volume: rfs format failed on /dev/block/set11o error message
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
hi brother
both download and recovery modes r working but again same problem
Uan_ar said:
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Just download and flash kb3 ,then tells me did phone reboot if yes then I will help further.
I know KB3 WILL solve your problem.
Sent from my GT-I9003 using Tapatalk
Uan_ar said:
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Click to expand...
Click to collapse
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
praveenpravi47 said:
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Click to expand...
Click to collapse
You have to extract the files from the .rar of the KPE (password is samfirmware.com).
praveenpravi47 said:
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
Click to expand...
Click to collapse
i'm sorry but i didn't understand you. Will you please rephrase it? You could flash it ok and also the cf-root? Did you follow all the instructions, step by step? Did you do a factory reset?
If it is not working yet, maybe you could try to flash the kb3, just like manrock111 said. He is much more experienced than i in this kind of things.
file extension problem
i searched for the files and downloaded it butits its extension is .tar.md5 can i use it like that?
Wow my phone is now working :thumbup::thumbup::thumbup::thumbup:
Sent from my GT-I9003 using xda premium
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...
Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
Help please...
Click to expand...
Click to collapse
refer to this thread http://forum.xda-developers.com/showthread.php?t=1894737 the first guide on how to upgrade to GB. Not saying ur in FROYO but it has the same step. Follow carefully
just did all steps in the guide with JPKPH not XXPQ... but still rebooting...
Arabi3d said:
just did all steps in the guide with JPKPH not XXPQ... but still rebooting...
Click to expand...
Click to collapse
Your phone has corrupted NAND memory probably.
chriz74 said:
Your phone has corrupted NAND memory probably.
Click to expand...
Click to collapse
How to fix it???
I flashed a MIUI and it worked perfectly... but when i enter Recovery mode and make mount and storage\ format dbdata it shows error...
also if i restore my stock rom JXKP3 or flash a new stock rom it keeps reboot again and the Factory Reset doesn't work....
please if anybody knows a solution please tell me...
Flash xxkpe then ddlf2
sent from Samsung galaxy S i9003 Remics JB v3
Send to the samsung service.. It's hardware problem..
Sent from my GT-I9003 using Tapatalk 2
Arabi3d said:
My phone was working with CM9 and I flashed it with stock Rom Gingerbread 2.3.6 JPKPH using Odin... I checked the PDA and PIT files and it showed (Passed). but it keeps rebooting...
I tried flashing it again without PIT but it is the same.. keeps rebooting...
I tried to make factory reset from Recovery but it says :
E formate_volume rfs format failed on /dev/block/stl10
Help please...
Click to expand...
Click to collapse
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash
chongns said:
i assuming you have no hardware problem.
1. you have converted to EXT4, which when flashing CM9 or MIUI.
2. you flash back to stock firmware, which using RFS format.
3. you get bootlooping after you flash stock "1 package .tar file in PDA", which is very wrong. although odin show pass
you should do the below.
1. download a component type firmware, eg. XXKPE or XXKPQ, unzip than you have 3 or 4 .tar file
2. flash with odin for the .pit file first.
3. reboot download mode, than flash the firmware.
How to flash
Click to expand...
Click to collapse
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???
Arabi3d said:
Thanks sooooooooo much... now it's resolved...
I did steps in this file:///C:/Users/Rasheed/Downloads/New%20folder/flashing-xxkpq-poseidon-writer.html
until the step 24.
now i have XXKPQ but with no Arabic language..
please how can I download Arabic language in XXKPQ???
Click to expand...
Click to collapse
this problem are not so technical. so i request you to search the forum.
hits. search for arabic patch.
Sent from my Galaxy Nexus using Tapatalk 2
hi all
i have got my friends I9003 for some day usage
its certain i dont like 2.3.7 as i am using xperia arc s with 4.0.4 original xperia T Rom by Zoeb0001
so to have ics experiance on samsung i have flash [ROM][PORT][Android 4.0.4] RemICS v1.5.3 - SIII look
and every thing is working fine but no getting network
what i have done till the time is below
1 rooted phone with the help of DDKP1-CFROOT-19-12-2011.tar
2. then flash this rom: [ROM][PORT][Android 4.0.4] RemICS v1.5.3 - SIII look
and not getting network using vodafone india 3G network
any help
thanx in adavence
1. flash ddlf2 firmware from her http://www.hotfile.com/dl/161660941/...2_INU.zip.html and password for zip is sampro.pl OR samfirmware
2. then flash cf-root from here http://www.mediafire.com/?0ndawa4g0s851h4 then go to recovery mode by pressing volume up,home button and power button
3. Wipe Data / Factory Reset.
4. Select the rom in recovery
5.and install
6.your device will be rebooted.
sent from Samsung galaxy S i9003 Remics JB v3
first link
karanmirchandani96 said:
1. flash ddlf2 firmware from her http://www.hotfile.com/dl/161660941/...2_INU.zip.html and password for zip is sampro.pl OR samfirmware
2. then flash cf-root from here http://www.mediafire.com/?0ndawa4g0s851h4 then go to recovery mode by pressing volume up,home button and power button
3. Wipe Data / Factory Reset.
4. Select the rom in recovery
5.and install
6.your device will be rebooted.
sent from Samsung galaxy S i9003 Remics JB v3
Click to expand...
Click to collapse
first link firmware ddlf2 not working
chauhanjayc said:
first link firmware ddlf2 not working
Click to expand...
Click to collapse
here u go.. http://www.hotfile.com/dl/161660941/8fd61ef/I9003DDLF2_I9003ODDLF2_INU.zip.html
how to flash Help
Hi friends,
last week i try to flash remics on my i9003.
below steps are followed during flashing.
1.am downloaded remics, odin and cf root.
2.first i did I9003_latona_20110114.pit file load in odin and put my mobile download mode
and check re-partition, auto reboot,f.reset time and click the start button.
3.after that i loaded cf root on PDA and uncheck the re-partition and clicked the start button it completed and mobile started to root explorer.
4.then i copied remics file to memory card and put it in mobile.
5.Now wipe all the data and try to install remics , but it shows assert failed error.
6.now my mobile lost the old firmware 2.3.6 unable to use it..
7.please friends help me to resolve this problem.
8.finally i try to flash DDLF2 (2.3.6) gingerbread from this link http://forum.xda-developers.com/showthread.php?t=1004647,
but i got continues reboot of samsung logo. i don't know which files to load in BOOTLOADER,PDA,PHONE,CSC in odin please help..
hariharasuthan said:
Hi friends,
last week i try to flash remics on my i9003.
below steps are followed during flashing.
1.am downloaded remics, odin and cf root.
2.first i did I9003_latona_20110114.pit file load in odin and put my mobile download mode
and check re-partition, auto reboot,f.reset time and click the start button.
3.after that i loaded cf root on PDA and uncheck the re-partition and clicked the start button it completed and mobile started to root explorer.
4.then i copied remics file to memory card and put it in mobile.
5.Now wipe all the data and try to install remics , but it shows assert failed error.
6.now my mobile lost the old firmware 2.3.6 unable to use it..
7.please friends help me to resolve this problem.
8.finally i try to flash DDLF2 (2.3.6) gingerbread from this link http://forum.xda-developers.com/showthread.php?t=1004647,
but i got continues reboot of samsung logo. i don't know which files to load in BOOTLOADER,PDA,PHONE,CSC in odin please help..
Click to expand...
Click to collapse
Refer this for flashing guide..
http://forum.xda-developers.com/showthread.php?t=1004622
Sent from my GT-I9003 using xda premium
File missing
kishankpadiyar said:
Refer this for flashing guide..
http://forum.xda-developers.com/showthread.php?t=1004622
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
thanks for the reply dude..
where should i get this files .. the link does't having this files..
8.Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
hariharasuthan said:
thanks for the reply dude..
where should i get this files .. the link does't having this files..
8.Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
Click to expand...
Click to collapse
1. download XXKPE from here.. http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
then flash using odin as in the instructions..
2. let it boot and then do factory reset then Download DDLF2.. which has only single file.. and put that in PDA section and flash again..
NOTE: XXKPE has the 3 files ua asking about..
Thank you
thanks dude ,
now am running 2.3.4 ...
can u please guide me to install remics ??
hariharasuthan said:
thanks dude ,
now am running 2.3.4 ...
can u please guide me to install remics ??
Click to expand...
Click to collapse
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Select the ROM zip from your SD Card and flash.
4. Go to Advanced -> Reboot Recovery.
5. After the Recovery restarts, Wipe Data / Factory Reset.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Rooting
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
---------- Post added at 04:14 PM ---------- Previous post was at 03:20 PM ----------
kishankpadiyar said:
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Select the ROM zip from your SD Card and flash.
4. Go to Advanced -> Reboot Recovery.
5. After the Recovery restarts, Wipe Data / Factory Reset.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Click to expand...
Click to collapse
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
hariharasuthan said:
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
---------- Post added at 04:14 PM ---------- Previous post was at 03:20 PM ----------
for root the mobile below file is correct??
ZHKPE-CFROOT-25-05-2012.tar
is this file alone loaded in PDA and latona.pit or any other file needed for Rooting??
Click to expand...
Click to collapse
Since i dont know which Rom ua on.. so u can try universal cf root from here http://forum.xda-developers.com/showthread.php?t=1351056
or download the exact cf root file for your firmware from here http://forum.xda-developers.com/showpost.php?p=19018861&postcount=1
Cf root Help
kishankpadiyar said:
Since i dont know which Rom ua on.. so u can try universal cf root from here http://forum.xda-developers.com/showthread.php?t=1351056
or download the exact cf root file for your firmware from here http://forum.xda-developers.com/showpost.php?p=19018861&postcount=1
Click to expand...
Click to collapse
hi friend,
i have attached the version of my mobile.
i have tried bagaria-09.GT-I9003_PDA and CF-ROOT-XXKPH-21.08.2011 for rooting but i got black screen and no further boot up.
so reflash the DDLF2 and using it.
please guide me how to root with this file and flash remics.
hariharasuthan said:
hi friend,
i have attached the version of my mobile.
i have tried bagaria-09.GT-I9003_PDA and CF-ROOT-XXKPH-21.08.2011 for rooting but i got black screen and no further boot up.
so reflash the DDLF2 and using it.
please guide me how to root with this file and flash remics.
Click to expand...
Click to collapse
Flash this file for LF2... I use this.. there may be updated files.. bt never mind for that.. just flash this..
then enter recovery.. flash Remics rom.. reboot recovery.. wipe data/ factory reset.. clear dalvik cache.. flash gapps n reboot..
thanks
kishankpadiyar said:
Flash this file for LF2... I use this.. there may be updated files.. bt never mind for that.. just flash this..
then enter recovery.. flash Remics rom.. reboot recovery.. wipe data/ factory reset.. clear dalvik cache.. flash gapps n reboot..
Click to expand...
Click to collapse
thank you friend now am running remics:good:... thanks for the guidance:angel:
after passing the root (cwm ) following the correct steps of vio tutorials (odin 4.38 ; beni_cwm-5_ext4_v2, beni 1.0) after the reboot when i try to enter on recovery mode the black screen still freezing on the "samsung logo" and nothing happens ... plz help me about that guys ...(normal mode is working) .
my OS is froyo 2.2.1 .
plz some help here .
anonymooos said:
after passing the root (cwm ) following the correct steps of vio tutorials (odin 4.38 ; beni_cwm-5_ext4_v2, beni 1.0) after the reboot when i try to enter on recovery mode the black screen still freezing on the "samsung logo" and nothing happens ... plz help me about that guys ...(normal mode is working) .
my OS is froyo 2.2.1 .
plz some help here .
Click to expand...
Click to collapse
um flash any gb f/w via odin then flash cwm..cwm doesnt support froyo aka android 2.1
speed_bot said:
um flash any gb f/w via odin then flash cwm..cwm doesnt support froyo aka android 2.1
Click to expand...
Click to collapse
how can i flash it with any gb if it can't boot on recovery mode ... it stucks on samsung logo bro
:good::good::good::good:
speed_bot said:
um flash any gb f/w via odin then flash cwm..cwm doesnt support froyo aka android 2.1
Click to expand...
Click to collapse
thama89 said:
:good::good::good::good:
Click to expand...
Click to collapse
the same answer of speed bot ... i can't install any other rom if i unable to boot on recovery mode is there any other way or suggestions ??
you can boot into dowlnoad mode..
anonymooos said:
the same answer of speed bot ... i can't install any other rom if i unable to boot on recovery mode is there any other way or suggestions ??
Click to expand...
Click to collapse
Try booting in download mode then..
Reboot the phone into Download Mode by holding down both the Volume Down button and the Home key (middle key) while turning on your phone.
Then flash stock GB from samfirmware
And install recovery via odin
Read the guide on the top in general section.
Harryhades said:
Try booting in download mode then..
Reboot the phone into Download Mode by holding down both the Volume Down button and the Home key (middle key) while turning on your phone.
Then flash stock GB from samfirmware
And install recovery via odin
Read the guide on the top in general section.
Click to expand...
Click to collapse
i read the guide and it's clear anaugh ... but at first i don't understand how can i flash GB stock from samfirmware ... i'm afred to made some mistake costs me my cell phone ... sorry for disturbing and i apriciete more help brother
anonymooos said:
i read the guide and it's clear anaugh ... but at first i don't understand how can i flash GB stock from samfirmware ... i'm afred to made some mistake costs me my cell phone ... sorry for disturbing and i apriciete more help brother
Click to expand...
Click to collapse
no problems your phone is safe..just enter the download mode and flash gb firmware that should do.you can download it from samfirmware .gt s5670
anonymooos said:
i read the guide and it's clear anaugh ... but at first i don't understand how can i flash GB stock from samfirmware ... i'm afred to made some mistake costs me my cell phone ... sorry for disturbing and i apriciete more help brother
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/
get latest firmware of your country from here^
Type 5670 in search (down left one) and check the latest version of your country.
Harryhades said:
http://www.sammobile.com/firmwares/
get latest firmware of your country from here^
Type 5670 in search (down left one) and check the latest version of your country.
Click to expand...
Click to collapse
thnx a loooooot bro that works well ... i get back finaly my recovery mode but with froyo ... is there any version of jelly bean ? to install it using odin ? and how can i root it even daugh froyo is not compatible with WCM ...
Harryhades said:
http://www.sammobile.com/firmwares/
get latest firmware of your country from here^
Type 5670 in search (down left one) and check the latest version of your country.
Click to expand...
Click to collapse
thnx a loooot bro i fainaly get back my recovery ... now i just need some how to root it bcz i still using froyo ... i reod on the guid ''SuperOneClick'' but wheen i try to downloed it i got lost ... what can be done here bro .
anonymooos said:
thnx a loooooot bro that works well ... i get back finaly my recovery mode but with froyo ... is there any version of jelly bean ? to install it using odin ? and how can i root it even daugh froyo is not compatible with WCM ...
Click to expand...
Click to collapse
first flash any gb firmware..then root then install cwm via odin then you can flash any rom that you want.
Im also in same position....im unable to enter recovery mod....im not getting the manu in recovery mod.
Msg is showing"unable to normal boot"
Im not even abl to do factry reset.coz for factry reset system need to reboot...every time the phone is stuck in same position. I did odin process...and it shows green signal....but after compliting the odin process system had to reboot to enter recovery mod..i process the next but before entering the final manu, the system is stuck during reboot.
Pls help me bro........i need ur urgent support brother.
Hi all, im newbie in this phone and need ur help because my phone when i wanna take a pic can´t it. because appear black and y install custom kernel of lolation and i cant eter in recovery mode i try to install the modclock to install the custom rom of lola but i cant it =( to see if my camera is fixed and my recovery mode too. now i have this installed
Model: GT-I9003
Firmware Version: 2.3.6
Baseban version: I9003DDLE1
Kernel Version: 2.3.35.7-1236430 [email protected] #1 Mon Jun 3 19.08.45 KST 2013
Compilation Number: Gingerbread.DDMF1
some one can helpme to install the custom rom of lolation Burger =) and fix my cam?
thank a lot and xcuse my english
Reflash full ddlf2/mf1/cf root mf1 with odin and then flash via recovery Lolation's rom.
Sent from my GT-I9003 using xda premium
acuicultor said:
Reflash full ddlf2/mf1/cf root mf1 with odin and then flash via recovery Lolation's rom.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
thanks but i use this form
FULLKPE or DDLF2 (DRIVER SAMSUNG,ODIN 1.85,PIT,BOOTLOADER,PDA,PHONE,CSC,CF ROOT).rar - 197.26 MB
[I9003DDMF1][2.3.6]Firmware With CF-Root[June 2013][Suitable Worldwide]
- Install Driver Samsung and reboot your computer
- FULL LF2 with pit
- DDMF1 in PDA
- CF ROOT MF1 in PDA
- Wipe data factory reset
- Format/system
- Flash Rom
- Wipe Cache and Dalvik Cache
Know bug !
some hotboot early because there are too many tweak at first boot
but i dont know where is the DDMF1 in PDA i use the PIT,BOOTLOADER,PDA,PHONE,CSC in the first use on odin but idk how put the ddmf1
please help me
Decompress mf1 and flash .tar file in pda
Sent from my GT-I9003 using xda premium
soko89 said:
Hi all, im newbie in this phone and need ur help because my phone when i wanna take a pic can´t it. because appear black and y install custom kernel of lolation and i cant eter in recovery mode i try to install the modclock to install the custom rom of lola but i cant it =( to see if my camera is fixed and my recovery mode too. now i have this installed
Model: GT-I9003
Firmware Version: 2.3.6
Baseban version: I9003DDLE1
Kernel Version: 2.3.35.7-1236430 [email protected] #1 Mon Jun 3 19.08.45 KST 2013
Compilation Number: Gingerbread.DDMF1
some one can helpme to install the custom rom of lolation Burger =) and fix my cam?
thank a lot and xcuse my english
Click to expand...
Click to collapse
First of all Download the following
XXKPE
DDLF2 only PDA
Use Oding to first flash XXKPE with PIT file in download mode.
Then Flash DDLF2 only PDA without PIT in download mode.
All flashing to be done using ODIN.
Once you have done this reboot ur phone and check for the problem.
Post here once done.
My cam now work and all my system wifi etc etc but i dont use the lolation rom and i dont care now my problem is that my network is soo poor idk only work for a few time and later say only emergency call or unhedged and later work again. im from colombia now my system appear in this form:
Model: GT-I9003
Firmware Version: 2.3.6
Baseband Version: i9003LUBKB1
Kernel Version: 2.6.35-cl1153545 [email protected] #1
Compilation Number: GINGERBREAD.DDLF2
some one can help me and thanks so much 4 help me with my cam ans system.:good::fingers-crossed:
im sing the firmware of sammobile and find the i9003L of comcel and use 7zip and deleted all and only use modem and later flash with all folder of DDLF2 (DRIVER SAMSUNG,ODIN 1.85,PIT,BOOTLOADER,PDA,PHONE,CSC,CF ROOT).rar but no use the modem of that folder if not my mod firm in phone bottom.
P.S sorry but my english is so poor =(
Flash full DDLF2 with PIT/PDA/MODEM/BOOTLOADER/CSC. Don't use Modem.zip. Boot the phone after flashing, set everything using setup wizard on bootup. Boot into the recovery do factory reset. Flash DDLF2 again with PIT/PDA/MODEM/BOOTLOADER/CSC. Download DDMF2 from the following link
http://forum.xda-developers.com/showthread.php?t=2340314.
Flash with Odin as PDA. Boot up phone setup everything. Everything should be working now.
Test and Report back.
Use Odin 1.85 Only
thank for all i can do it with your help =) can close the thread now