Database Info

[Q] xxkph

after flashing my galaxy sl i9003 using xxkph it is done smoothly but after restart my mobile it doesn't start normaly it is restarting aain and again and recovery mode doesn't appear how to fix this issue

Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?

hi brother
i didnt take any backup i am a biginer that do so..
the reason is my first fw is froyo i just updated to xwkpg(2.3.5) via kies and again flashed with odin ie gb ver xxkpq (2.3.6) then try to instal cf root but it is not suite for my fw after restarting nothing appear on my phone ten somebody give me a post to do wit xxkph i try this via odil 3 to 5 times it comes boot screen and do not enter ome screen then someone post me to do with xxkb3 this fw is prograssing download what i do to come my ome screen pls help me bro

Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
pls brother kindly give me a solution

Uan_ar said:
Flash it again. Flash twice KPE and twice KPH. Don't forget to do a wipe data/cache factory reset after each flash. Did you backup the EFS folder?
Click to expand...
Click to collapse
wiping data/factory reset it shows e:format_volume: rfs format failed on /dev/block/set11o error message

can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787

hi brother
both download and recovery modes r working but again same problem

Uan_ar said:
can you enter into download mode to flash it again?
Folow this instructions: http://forum.xda-developers.com/showthread.php?t=1133787
Click to expand...
Click to collapse
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls

Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.

Just download and flash kb3 ,then tells me did phone reboot if yes then I will help further.
I know KB3 WILL solve your problem.
Sent from my GT-I9003 using Tapatalk

Uan_ar said:
Go to download mode and try to reflash. Then try to put this cf-root http://forum.xda-developers.com/showthread.php?t=1351056 or this one http://forum.xda-developers.com/showthread.php?t=1331253 according to the version u flashed.
Click to expand...
Click to collapse
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?

praveenpravi47 said:
for flashing xxkpe it asking these single files
"CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar"
but i have only single rar file ie .tar file how i get tese files i serched everyware to download kindly give me a link to download tese files pls
Click to expand...
Click to collapse
You have to extract the files from the .rar of the KPE (password is samfirmware.com).
praveenpravi47 said:
thank u brother u r god for me it is working
it shows my home screen after some time go to restart why?
Click to expand...
Click to collapse
i'm sorry but i didn't understand you. Will you please rephrase it? You could flash it ok and also the cf-root? Did you follow all the instructions, step by step? Did you do a factory reset?
If it is not working yet, maybe you could try to flash the kb3, just like manrock111 said. He is much more experienced than i in this kind of things.

file extension problem
i searched for the files and downloaded it butits its extension is .tar.md5 can i use it like that?

Wow my phone is now working :thumbup::thumbup::thumbup::thumbup:
Sent from my GT-I9003 using xda premium

[Q] xxkph problem after flashing

after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:

praveenpravi47 said:
after flashing galaxy sl i9003 with xxkph using odin its going well, but after first boot it shows language selection option it is normal. but every restart it shows same option how to solve this:
Click to expand...
Click to collapse
had happened to me also after foll steps:
1) flash kpe pit file only. (didnt have entire zip so had flashed pit only)
2) flash kpq (only pda)
resulted in the above problem
-----------------------------------
so had to flash complete kpe, ie all the 5 files-pit, bootloader, pda, modem and csc, and after reboot flashed kpq, only pda.
then no problem.

hi bro
where i get these five files i search every were but no results could u post me a link? pls

praveenpravi47 said:
where i get these five files i search every were but no results could u post me a link? pls
Click to expand...
Click to collapse
mediafire.com/?geydlhgbck7aofb
or
select xxkpe link from here
http://forum.xda-developers.com/showthread.php?t=1004647

HELP! Odin failed during upgrade to ZHKPD

Hi,
I have a i9003 that ran on stock 2.2.1 ROM and I've been having serious SOD problems.
Updated to 2.3.5 ZHKPD last night using KIES. The update was successful but gave me screen blackouts during calls (screen and buttons turned all black whenever I start a call. I heard voice but was never able to turn on the screen again) in addition to SOD problems.
I have then downloaded Odin 1.83, and "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" from here and tried to flash my phone again after reading a lot of guides on this forum.
I got a "Can't open the specified file" error from Odin (see attachment). Now when I turn on my phone all I see is a picture with a phone and a computer.
Was the re-partition cause of the problem?
Can someone here please let me know what I can do? To get 2.3.5 back into my phone?
Thanks in advance.

Did u flash XXKPE beefore flashing ???
If you have then try downloading the firmware from another source

I haven't - the "I9003ZHKPD_I9003ZZHKP9_I9003XXKPM_HOME.tar" file is the only one I tried to flash.
It's phone from Hong Kong and I do want to keep something from the stock firmware, such as the Chinese input.
What do you suggest I should do next?

flash it again from xxkpe with the step "re-partition"

Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?

Well, the only question is: Can you come into download mode?
If you can, just flash KPE>KPD and everything solved.
If you can't get a jig or go to service center.

Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?

dbowers said:
Thanks. Did you mean I should first flash it with the "I9003XXKPE" file here?
Will I need the PIT file, and after XXKPE I'll have to flash ZHKPD right?
Click to expand...
Click to collapse
Yes, XXKPE with pit, after that, ZCKPD WITHOUT pit

Use this guide for more help
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using XDA App

Thanks all for your help so far. I've now flashed it to XXKPE - going to flash ZHKPD now.

No prob
Sent from my GT-I9003 using XDA App

GT-I9003 restart

hi ,
i had restarting problem with my galaxy SL GT-I9003
its rom foryo 2.2.1
i change the rom by odin from 2.2.1 to 2.3.4
and had the same problem
and back it to 2.2.1 and no solution..
this like my problem ....
http://www.youtube.com/watch?v=k1cNc8dzUmc
plz any help
when i enter the recovery i see this text
--Movi_check start..!!
Movinand open fail
Movinand Checksum Confirmation Fail
1fs pass open fail
--movi_checking undone!...
update medis, please wait
E: Can't mount /dev/block/mmcb1k0p1
(No such file or directory)
E: copy_dbdata_meadia:Can't mount SDCARD:
your storage not prepared yet , please use UI menu for format and reboot actions.
copy default media content failed.
Click to expand...
Click to collapse
hellllllllllllllllllp

any help

what firmware version on are you right now?

noypi_ako said:
what firmware version on are you right now?
Click to expand...
Click to collapse
firmware version foryo 2.2.1

i mean, DXKB or XXKP or something ?

the problem is the ext4, when you flash stock room do not have ext support, simply flash vurrutv8 over xxkpq and problem gone
or re format it with pit to rfs, easy!
Sent from my GT-I9003 using xda premium

i mean, DXKB or XXKP or something ?
Click to expand...
Click to collapse
Where do I know?
-------
I9003JPKD1_CL913246_PDA_Kernel
I9003JXKA4_CL856203_Phone.tar
I9003OJPKC2_CL964196_CSC.tar
-------
velve.ffff said:
the problem is the ext4, when you flash stock room do not have ext support, simply flash vurrutv8 over xxkpq and problem gone
or re format it with pit to rfs, easy!
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
I Beginner
Can you explain to me the way step by step plz
its 2.2.1

read this carefully and follow every step written on it for XXKPQ
http://forum.xda-developers.com/showthread.php?t=1133787
you have to download 2 firmwares XXKPE and XXKPQ
read and then follow that guide carefully

noypi_ako said:
read this carefully and follow every step written on it for XXKPQ
http://forum.xda-developers.com/showthread.php?t=1133787
you have to download 2 firmwares XXKPE and XXKPQ
read and then follow that guide carefully
Click to expand...
Click to collapse
can u give me links of the 2 firmwares plz ><

Roua Got your PM. Sorry I didn't reply there, but you can get it from sammobile.com, You can download the firmware's there properly as most of them have taken off the firmware links from hotlink due to being deleted by SOPA issues. Anyways you can get it re-downloaded there. You only need to extract it once from it's current ZIP file and not twice Follow my guide and everything should go great from there.
Hopefully if you get stuck you can follow up with me

noypi_ako said:
read this carefully and follow every step written on it for XXKPQ
http://forum.xda-developers.com/showthread.php?t=1133787
you have to download 2 firmwares XXKPE and XXKPQ
read and then follow that guide carefully
Click to expand...
Click to collapse
ohhh plz
i did what u say
but it's keeps restarting .. and without starting tune
its stuck at samsung logo again..

You and me are in same situation
http://forum.xda-developers.com/showthread.php?t=1622695
Hope we will get a way out.

androidn00bie said:
You and me are in same situation
http://forum.xda-developers.com/showthread.php?t=1622695
Hope we will get a way out.
Click to expand...
Click to collapse
i hope so

boot loop from samsung logo
I am also facing similar problem.I think we have to fix the internal sdcard "E:" access problem then we have to proceed to normal Rom flashing.
please anybody help us.
Thanks

ok
i will explain better,
when you flash a custom room like cm, poseidon or so, partition, our disk are formatted to ext 4 type, re flash to xxkpq don't back to rfs,xxkpq kernel, doesn't have ext 4 support, and of course, starts fail and stuck to logo for this reason, try to flash uc kernel or another kernel with ext 4 to get your device working, if doesn't work, try to re flash xxkpe with pit and re format (if you don't know how follow guide, now I can't point you because I'm from my phone)
Sent from my GT-I9003 using xda premium

velve.ffff said:
ok
i will explain better,
when you flash a custom room like cm, poseidon or so, partition, our disk are formatted to ext 4 type, re flash to xxkpq don't back to rfs,xxkpq kernel, doesn't have ext 4 support, and of course, starts fail and stuck to logo for this reason, try to flash uc kernel or another kernel with ext 4 to get your device working, if doesn't work, try to re flash xxkpe with pit and re format (if you don't know how follow guide, now I can't point you because I'm from my phone)
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
most of them havent flashed any roms besides stock. im running out of ideas already besides telling them to bring it to service center.

noypi_ako said:
most of them havent flashed any roms besides stock. im running out of ideas already besides telling them to bring it to service center.
Click to expand...
Click to collapse
i found "clockwork" way in the following link we might try it
Thanks

sazu1976 said:
i found "clockwork" way in the following link we might try it
Thanks
Click to expand...
Click to collapse
and here is the link
http://forum.xda-developers.com/showthread.php?t=1151704

i don't understand wt to do now
explain plz

ohhhhhhhh i think i had problem here
after flashed to xxkpq
when i enter the recovery i see this
i think i stuck in 3e maybe ?!!
android system recovery <3e>
E: failed to mount / data (no such file or directory )
--copying media files...
E: failed to mount / sdcard (File exists)
E:copy_cache_media:can't mount /sdcard
your storage not prepared yet,please use UI menu for format and reboot actions
meida files copy failed
# MANUAL MODE #
--appling multi-CSC...
installing multi-CSC
cant access to '/system/csc/MID/system/'.
successfully applied multi-CSC

[HELP!!!] P6200--Tons of error in recovery mode

Sorry to avoid hijacking other post...
That's the step how I get to this...
ICS with wifi not working
Odin back to HC with same .PIT
Completed once, while cant google-login, saying android.setting error
Try to use odin to return to ICS, with the same .PIT file...
Bricked...cant enter recovery, but only download mode
Use Heimdall to flash the recovery.img from previous page
Successfully entered recovery, but showing this...
#Manual Mode#
-- Updating Application...
E:failed to mount /system (Invalid argument)
E: install_application_for_customer: Can't mount /system
copy application failed.
-- Appling Multi-CSC...
E:failed to mount /system (Invalid argument)
E:multi_csc: cant mount /system
Multi-csc applied failed.
Can also enter download mode, while odin now cant recognize it...
Thank you~~~
and sorry that i am too green to post link.....><
Did i brick my tab.... ><
ht tp://i10.photobucket.com/albums/a106/lokfukobe/IMG042.jpg

are you using P6200 or P6200L or maybe some other series? and what ICS are you flashing? Austria Open (XXLQ1)?
what odin version you used? odin3 v.1.85?
is it any possibility the HC or ICS stock ROM is broken?
what CWM version do you use?
can you post the log on odin after flashing back to HC?

motosuki said:
are you using P6200 or P6200L or maybe some other series? and what ICS are you flashing? Austria Open (XXLQ1)?
what odin version you used? odin3 v.1.85?
is it any possibility the HC or ICS stock ROM is broken?
what CWM version do you use?
Click to expand...
Click to collapse
Thanks motosuki, :crying::crying:
I think mine is P6200, I m from HK, while when I bought it from others(2nd hand), it's flashed with UK HC rom.
Then I flashed XXLQ1 using MobileODIN...
Afterthat, I used odin3 v1.85 to flash back to HC, and of cos during this period that I cannot even boot up into system...
I have done numerous factory reset...= =
UM....and sorry, I m not quite sure if I use any CWM....now the recovery heading shows...(3e)
:crying::crying::crying: Thanks for your kindly help~~~~

lokfukobe said:
Thanks motosuki, :crying::crying:
I think mine is P6200, I m from HK, while when I bought it from others(2nd hand), it's flashed with UK HC rom.
Then I flashed XXLQ1 using MobileODIN...
Afterthat, I used odin3 v1.85 to flash back to HC, and of cos during this period that I cannot even boot up into system...
I have done numerous factory reset...= =
UM....and sorry, I m not quite sure if I use any CWM....
:crying::crying::crying: Thanks for your kindly help~~~~
Click to expand...
Click to collapse
have you try flashing to ICS with the pit file? try use this pit file.
use odin3 v.1.85, check re-partition, auto reboot, and f.reset time. put the XXLQ1 ROM on PDA and make sure its on tar.md5 format.
i hope it work.

motosuki said:
are you using P6200 or P6200L or maybe some other series? and what ICS are you flashing? Austria Open (XXLQ1)?
what odin version you used? odin3 v.1.85?
is it any possibility the HC or ICS stock ROM is broken?
what CWM version do you use?
can you post the log on odin after flashing back to HC?
Click to expand...
Click to collapse
motosuki said:
have you try flashing to ICS with the pit file? try use this pit file.
use odin3 v.1.85, check re-partition, auto reboot, and f.reset time. put the XXLQ1 ROM on PDA and make sure its on tar.md5 format.
i hope it work.
Click to expand...
Click to collapse
Thanks~~~~
May I ask, in case.... cos, this morning before I went work..
I found that odin cant recognize my tab...even there is a "dingding" sound from computer...(computer recognized it)
if I still cant get my tab recognized by odin....
anything I can do on it??
And actually, is my problem not really that serious now....:crying::crying::crying::crying:

lokfukobe said:
Thanks~~~~
May I ask, in case.... cos, this morning before I went work..
I found that odin cant recognize my tab...even there is a "dingding" sound from computer...(computer recognized it)
if I still cant get my tab recognized by odin....
anything I can do on it??
And actually, is my problem not really that serious now....:crying::crying::crying::crying:
Click to expand...
Click to collapse
maybe you just need to re-install samsung kies to get the driver back. don't forget to restart your pc.

motosuki said:
maybe you just need to re-install samsung kies to get the driver back. don't forget to restart your pc.
Click to expand...
Click to collapse
Thank you so much~~~
Your reply gives me so much confidence, and so comforting~~~ :good::good:
Will update as soon as I try tonight~~thank you~~